Rear Section

Parcel Shelf LWB (Long wheel base).



Fits:
Porsche 911 1972-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 40.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150195200

The product you are viewing cross references to these numbers

Parcel Shelf LWB (Long wheel base).
Left Half or Right Half.



Fits:
Porsche 911 1969-71

Click 'Zoom in' for large parts diagram.
Diagram ref no 40.

Please note this is a special manufacture parts delivery time is approximately 2 - 3 weeks -/+

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150197

The product you are viewing cross references to these numbers

Parcel shelf repair section under rear window. Painted Steel.



Fits:
Porsche 911 (SWB) 2.0L 01/1963-11/1968

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150107101

The product you are viewing cross references to these numbers

Parcel shelf repair section under rear window. Painted Steel.



Fits:
Porsche 911 2.0L-2.2L 08/1968-07/1971

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150195100

The product you are viewing cross references to these numbers

Pocket in door pillar for engine lid pull handle. Fits 90150204100/1.



Fits:
Porsche 911 SWB 01/1963-07/1968

Click 'Zoom in' for large parts diagram.
Fits to no 22 on diagram

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150204100

The product you are viewing cross references to these numbers

Profile rail for engine bay seal, Rear, Engine bay,
length: 1 METER.



Fits:
Porsche 911 2.0-3.3 01/63-07/89

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150179720

The product you are viewing cross references to these numbers

Profile rail for engine bay seal, Rear, Engine bay,
length: 1 METER.



Fits:
Porsche 911 2.0-3.3 01/63-07/89

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150179720

The product you are viewing cross references to these numbers

Rear axle torsion bar tube reinforcement panel. Porsche 911 65-78



Fits:
Porsche 911 - 1965 to 1978



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150101

The product you are viewing cross references to these numbers

Rear axle torsion bar tube repair panel.



Fits:
Porsche 911 1965-68*
Porsche 911 1968-86

*Right side panel has 2 ridges for the oil pipes as it is later type model. Would fit the early car as well but it will be different in appearance from original.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150101

The product you are viewing cross references to these numbers

Rear bumper lower valance kit. (3 PCS).



Fits:
Porsche 911 65-73

Click 'Zoom in' for large parts diagram.
Diagram ref no 29

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150590400

The product you are viewing cross references to these numbers

Rear Bumper Lower Valance CUT for Twin outlet Exhaust . Porsche 911 1974-89 impact bumper cars.



Fits:
Porsche 911 1974-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 30

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150517108GRV

The product you are viewing cross references to these numbers

Rear bumper lower valance fibreglass. Porsche 911 1974-89 impact bumper cars.



Fits:
Porsche 911 1974-89

This gel-coat fiberglass lower panel can be used with "GT3 style" center outlet exhausts like JP: 1620614300, 1620614200, 1620802210, 1620802410 or any other type of alternative exhaust setup. 

Cut out template is included for dual center exhaust.

Please Note: 
Installation of this part must be done by persons with matching skills, since measuring, precision cutting and drilling is necessary to obtain a satisfying result. Make sure to test fit prior to painting.

Click 'Zoom in' for large parts diagram.
Diagram ref no 30

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150517108GRV

The product you are viewing cross references to these numbers

Rear Bumper Section / license Panel aluminium.



Please note: DANSK product has been recently redesigned to come with round lip to accommodate the seal. See more detailed pictures in the product gallery.

Fits:
Porsche 911 1966-73

Click 'Zoom in' for large parts diagram.
Diagram ref no 3

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150502320ALU

The product you are viewing cross references to these numbers

Rear bumper section / license panel.



Fits:
Porsche 911 1966-73

Click 'Zoom in' for large parts diagram.
Diagram ref no 15.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150502320GRV

The product you are viewing cross references to these numbers

Rear bumper section / license panel.



Please note: DANSK product has been recently redesinged to come with round lip to acommodate the seal. See more detailed pictures in the product gallery.

Fits:
Porsche 911 1966-73

Click 'Zoom in' for large parts diagram.
Diagram ref no 15.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150502320DSK

The product you are viewing cross references to these numbers

Rear chassis lower heel panel.



Fits:
Porsche 911 1965-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 34

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150100020

The product you are viewing cross references to these numbers

Rear Cross Member Latch Panel.



Fits:
Porsche 911 (930) TURBO 1984-89

This part cover part numbers: 93050108001GRV, 93050108001, 93050108000,

Click 'Zoom in' for large parts diagram.
Diagram ref no 33.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93050108001GRV

The product you are viewing cross references to these numbers

Rear Cross Member Latch Panel.



Fits:
Porsche 911 08/1973- 1989

Porsche 911/912 1963-73*
*it is necessary to rework this part or use product code 90150108722DSK

This part cover part numbers 91150708001GRV,
90150108720, 91150708722, 91150708000, 9115070801,

Click 'Zoom in' for large parts diagram.
Diagram ref no 33.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150708001DSK

The product you are viewing cross references to these numbers

Rear cross member latch panel.



Fits:
Porsche 911/912 1965-73*
*it is necessary to rework this part

Porsche 911 1974-89

This part cover part numbers 91150708001GRV,
90150108720, 91150708722, 91150708000, 9115070801,

Click 'Zoom in' for large parts diagram.
Diagram ref no 33.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150708001GRV

The product you are viewing cross references to these numbers

Rear cross member latch panel. 



Fits:
Porsche 911/912 1963-73*

Click 'Zoom in' for large parts diagram.
Diagram ref no 33.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150108722

The product you are viewing cross references to these numbers

Rear Cross Member, inner skin only.



Fits:
Porsche 911 2.0L-3.2L 01/1963-07/1989

Click 'Zoom in' for large parts diagram.
Diagram ref no 7

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1680602600

The product you are viewing cross references to these numbers

Rear Cross Member, outer skin only.



Fits:
Porsche 911 2.0L-3.2L 01/1963-07/1989

Click 'Zoom in' for large parts diagram.
Diagram ref no 8

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1680602500

The product you are viewing cross references to these numbers

Rear Decklid Strut Bracket.



Fits:
Porsche 911 1965-71

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91151203560

The product you are viewing cross references to these numbers

Rear Decklid Strut Bracket.



Fits:
Porsche 911 1972-89

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91151203585

The product you are viewing cross references to these numbers

Rear End Plate Panel.



Fits:
Porsche 911 1974-86
Porsche 911 (930) Turbo 1975-77

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150315100GRV

The product you are viewing cross references to these numbers

Rear hinge repair panel.



Fits:
Porsche 911 2.0-3.3 01/63-07/85

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1680250310

The product you are viewing cross references to these numbers

Rear Indicator Metal Frame. Prime coated.


Fits:
Porsche 911/912 1965-68

Click 'Zoom in' for large parts diagram.
Diagram ref no 32

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150306

The product you are viewing cross references to these numbers

Rear lower valance. 



Fits:
Porsche 911 Turbo

Click 'Zoom in' for large parts diagram.
Diagram ref No 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93050507704GRV

The product you are viewing cross references to these numbers

Rear parcel shelf lower part blank for Targa models.
This rear panel trim was manufactured according to the original.
To guarantee a very good fit the fairings were cut with the highest precision.



Fits:
Porsche 911 Targa 1965 - 1971

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155507545

The product you are viewing cross references to these numbers

Support Bracket for Parcel Shelf SWB (Short wheel base).



Fits:
Porsche 911 1965-69

Please note this is a special manufacture parts delivery time is approximately 2 - 3 weeks -/+

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150195050

The product you are viewing cross references to these numbers

Support Bracket for Rear Parcel Shelf .



Fits:
Porsche 911 1970-73

Please note this is a special manufacture parts delivery time is approximately 2 - 3 weeks -/+

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150195150

The product you are viewing cross references to these numbers

Support Bracket for Rear Parcel Shelf.



Fits:
Porsche 911 1974-89

Please note this is a special manufacture parts delivery time is approximately 2 - 3 weeks -/+

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150195250

The product you are viewing cross references to these numbers

Rear screen corner repair panel.



Fits:
Porsche 911 1966-89 Coupe Models

Click 'Zoom in' for large parts diagram.
Diagram ref no 40.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150306

The product you are viewing cross references to these numbers

Rear screen corner repair panel.



Fits:
Porsche 911 2.0-3.3 01/63-07/89 Coupe model

Click 'Zoom in' for large parts diagram.
Diagram ref no 40.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150306

The product you are viewing cross references to these numbers

Rear screen lower repair panel.



Fits:
Porsche 911 2.0-3.3 01/63-07/89 Coupe model

Click 'Zoom in' for large parts diagram.
Diagram ref no 40.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1680602300

The product you are viewing cross references to these numbers

Rear Seat Bearing Bracket.



Fits:
Porsche 911 1987-89 Coupe / Targa
Porsche 964 1989-94 Coupe / Targa

Click 'Zoom in' for large parts diagram.
Diagram ref no 3

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150104102GRV

The product you are viewing cross references to these numbers

Rear seat belt mount SWB (Short wheel base).
Finished in black paint 



Fits:
Porsche 911/912 1965-68

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150101823

The product you are viewing cross references to these numbers

Rear Seat Bottom Panel.



Fits:
Porsche 911 1973-89 501/915 Gearbox

Click 'Zoom in' for large parts diagram.
Diagram ref no 41.

Please note: While all parts have been produced as originals, they may not fit your car 100%. Some cars may be as old as 55 years, and due to the variability of the build at the factory, rust or prior accident damage they may need some trimming and adjustment to fit.

Please note this is a special manufacture parts delivery time is approximately 2 - 3 weeks -/+

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150199

The product you are viewing cross references to these numbers

Rear seat well bottom repair chassis panel
Porsche 911 (901 gearbox) 1963-71



Fits:
Porsche 911 (901 gearbox) 2.0-2.4 01/1963-07/1971

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150177

The product you are viewing cross references to these numbers

Rear shock tower reinforcement.
Sold per kit, 1 kit required per car.

Fits:
Porsche 911 - 1965 to 1972

✓ Laser Cut – Fits the profile of the shock tower perfectly.
✓ Strong – Solidly ties the towers and cross-member into unibody box sections and inner wheel well. Distributes the shock loads properly and reinforces the entire section.
✓ Holes – Great appearance and convenient routing of hoses and wires.
✓ Weld from one side – Fully seam weld without removing rear firewall.
✓ Light Weight – Properly engineered to distribute loads, not 'over engineered' with excess material and weight.

When converting the 911 torsion bar rear suspension to coilover, the rear shock towers should be reinforced. Coilover springs introduce loads the towers were not designed to handle. Without reinforcement, cracks can develop over time – most frequently between the crossmember and unibody box sections.

Our reinforcement kit strengthens this vulnerable area and properly distributes coilover spring loads.

Rear Shock Tower Reinforcement
Our brackets make it easy to get a professional result, saving you the time and guesswork cutting your own.

This kit requires welding for installation.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2280923

The product you are viewing cross references to these numbers