Control Arms Front
Fits:
Porsche 911 / 930 / 912 / 914 1965-89
Bring back that iconic Porsche handling with our new front lower control arm bushings. Designed to reduce drag, improve handling of your street or track driven 911, and built with longevity and durability in mind. Taking the rubber bushings out of the equation will retain optimal suspension geometry throughout the full range of motion while reducing compliance for a more direct feel.
• Bushing housings CNC machined from 6061-T6 Aluminum
• Close tolerance design for added rigidity
• Durable anodized finish resists corrosion
• Low friction Delrin bushing inserts
• Stainless steel bushing race & hardware
• Bushing race installation tool included
• Direct replacement of the OEM bushings
• Outlasts factory components
• Engraved Rennline logo
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 / 912 / 930 1965-89
Porsche 964 / 993 1989-98
Porsche 944 / 968 / 924 1976-95 w/ aluminium control arms
Easily removes the following bushings:
• 911 / 930 / 912 trailing arm bushing
• 964 / 993 front lower control arm rear bushing
• 944 front lower control arm front bushing (aluminium arms)
It used to be a difficult task
This clever tool is a real time saver that makes easy work of removing split bushings. Doing the job with the arms still on the car for 911, 964, and 993 saves time and labor.
Split bushings are actually two separate bushings, each pressed in from opposite sides of the arm. Removing them requires driving them out from the parting line where they meet, in the center of the arm. This has traditionally been a difficult job that requires removing the arm and fumbling with a punch to try and drive out the bushings from the center.
Easy & quick
This tool makes it easy to engage the parting line and drive out the bushing. It is so easy that the job can be performed without removing the arm from the 911, 964, and 993.
Pro Mechanics and DIY'ers alike will appreciate the time saving this tool provides.
Combine with bushing installation tools part #2020904 to complete the job.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2020903
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Our GT3 front suspension delivers superior grip and ride quality.
We've adapted our 997 GT3 control arms to fit early '65-'89 911 and '70-'76 914. The system includes a complete subframe and replaces the stock crossmember, control arms, mounts, bushings and ball joints. Built from aircraft grade aluminum, the system is about half the weight of the replaced components.
Ease of adjustment
Easily adjust camber, caster and even track width.
Left and right threaded double adjusters are provisioned on the control and caster arms to provide for easy length adjustment without disconnecting the member.
Low friction, spherical action
Low friction allows the suspension to follow road/track irregularities smoothly, keeping tire contact patches stable. Ride and performance are greatly improved.
Pivot points are precision spherical heim joints, oversized for strength and durability. Spherical heim joints move freely with very low friction, yet precisely position suspension members to maintain alignment settings with zero deflection under load. Lack of deflection makes the car predictable and easier to drive fast, reducing need for constant corrections by the driver.
Spherical action of the heim joints self aligns continuously, ensuring smooth non-binding action even when the chassis is flexing under load.
Weathersealed
Heim and ball joints are completely sealed to keep out contaminants and water. The result is a extended life and a robust system suitable for street or track use.
Improved Geometry and subframe
Control arms are longer than stock to provide a improved camber curve and grip when cornering. Front pickup point is similarly moved inboard to maintain a stable caster curve.
Our GT3 subframe includes longitudinal members that connect the front mounts back to the crossmember. This provides a proper load path to transfer the considerable braking forces from the front mounts back to the crossmember. This mimics the braking load path of the factory 935 arms and product control arms.
Braking loads are thus fed into the chassis at the crossmember, as intended by the factory.
Fit and finish
Attention to detail stands out. From the quality of the machine work to the hard anodize finish that is both attractive and scratch resistant. Stressed threads are heli-coiled for strength. Heim joints are replaceable and sealed for durability.
The system readily bolts onto your existing chassis, no drilling or welding required – installation is completely reversible.
You can buy spare control arms if they need replacing. Part number 2180016-SA
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2180010
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
This is the replacement Control arms for the 2180010 kit.
GT3 Front Suspension System. The Ultimate Front Suspension System
Our GT3 front suspension delivers superior grip and ride quality.
We've adapted our 997 GT3 control arms to fit early '65-'89 911 and '70-'76 914. The system includes a complete subframe and replaces the stock crossmember, control arms, mounts, bushings and ball joints. Built from aircraft grade aluminum, the system is about half the weight of the replaced components.
Ease of adjustment
Easily adjust camber, caster and even track width.
Left and right threaded double adjusters are provisioned on the control and caster arms to provide for easy length adjustment without disconnecting the member.
Low friction, spherical action
Low friction allows the suspension to follow road/track irregularities smoothly, keeping tire contact patches stable. Ride and performance are greatly improved.
Pivot points are precision spherical heim joints, oversized for strength and durability. Spherical heim joints move freely with very low friction, yet precisely position suspension members to maintain alignment settings with zero deflection under load. Lack of deflection makes the car predictable and easier to drive fast, reducing need for constant corrections by the driver.
Spherical action of the heim joints self aligns continuously, ensuring smooth non-binding action even when the chassis is flexing under load.
Weathersealed
Heim and ball joints are completely sealed to keep out contaminants and water. The result is a extended life and a robust system suitable for street or track use.
Improved Geometry and subframe
Control arms are longer than stock to provide a improved camber curve and grip when cornering. Front pickup point is similarly moved inboard to maintain a stable caster curve.
Our GT3 subframe includes longitudinal members that connect the front mounts back to the crossmember. This provides a proper load path to transfer the considerable braking forces from the front mounts back to the crossmember. This mimics the braking load path of the factory 935 arms and product control arms.
Braking loads are thus fed into the chassis at the crossmember, as intended by the factory.
Fit and finish
Attention to detail stands out. From the quality of the machine work to the hard anodize finish that is both attractive and scratch resistant. Stressed threads are heli-coiled for strength. Heim joints are replaceable and sealed for durability.
The system readily bolts onto your existing chassis, no drilling or welding required – installation is completely reversible.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2180016-SA
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Upgrade Your Porsche Suspension with Adjustable Control Arms: Technical Specifications and Benefits
Technical specifications of Adjustable Control Arms:
- Adjustable control arms are suspension components that allow for precise adjustment of the vehicle's camber, caster, and toe settings.
- They are typically made from high-strength steel or lightweight alloys.
- Adjustable control arms feature threaded or eccentric mounts that enable fine-tuning of the suspension geometry.
- They come in various lengths and designs to fit different Porsche models and suspension setups.
- Adjustable control arms are available as upgrade options or standard replacements for Porsche vehicles.
Benefits of upgrading or replacing Adjustable Control Arms for your Porsche:
Improved alignment settings: Adjustable control arms allow for precise adjustment of camber, caster, and toe angles, optimizing the alignment settings for better handling, tire wear, and performance.
Enhanced cornering performance: By fine-tuning the suspension geometry, adjustable control arms can help reduce understeer or oversteer tendencies, improving the vehicle's cornering capabilities and overall stability.
Better tire contact and grip: Proper alignment settings achieved through adjustable control arms ensure optimal tire contact with the road surface, resulting in improved traction, grip, and braking performance.
Extended tire life: By maintaining proper alignment, adjustable control arms can help prevent premature tire wear, saving you money on frequent tire replacements.
Customization and flexibility: Adjustable control arms offer the ability to adjust suspension settings to suit specific driving preferences, track conditions, or modifications made to the vehicle.
At Design911, we understand the importance of finding the correct parts for your Porsche and providing professional advice to ensure the best results. We offer a wide selection of adjustable control arms designed specifically for Porsche models, including OEM replacements and performance upgrades. Our experienced team can assist you in selecting the appropriate control arms based on your Porsche model, year, and desired suspension adjustments. With our expertise and commitment to customer satisfaction, you can rely on us to help you achieve optimal suspension performance and handling characteristics for your Porsche. Contact us today for expert guidance and high-quality parts tailored to your needs.
- Strut Brace
- Anti Roll Sway Bar
- Control Arms Rear
- Drop links Front
- Drop links Rear
- Engine mounts
- Gearbox mounts
- Top mounts Front
- Top mounts Rear
- Steering Track Rods
- Spring plates
- Ball Joints
- A-Frame Wishbone
- Torsion Bars
- Front Sub frame
- Rear Sub Frame
- Roll Cages
- Bilstein SPORT B6 Dampers
- Bilstein SPRINT B8 Dampers
- Ohlins Road & Track Suspension
- Classic |Safari & Coil Over Kits
- Motorsport & Track
- Superpro Polyurethane Bushes
- Powerflex Polyurethane Bushes
- Powerflex Black Series Bushes
- Powerflex Heritage Collection
- Spax Suspension
- KW Variant 3 Adjustable Suspension kits
- KW Clubsport Coilover Suspension Kits WITH Top Mounts
- KYB Suspension