Air Induction Kits
This Product Fits:
Porsche 991 (911) 3.4L Carrera 2011>>
Porsche 991 (911) 3.8L Carrera S 2011>>
Porsche 991 (911) GT3 Mk1 and Mk2
Panel Filter Size:
- B: 271 mm
- A: 193 mm
BMC air filters are designed and produced to ensure a higher air flow than original paper filters. In F1, for example, BMC cotton filters minimize the loss of air flow pressure passing through the air filter; this way ensures the best conditions for full exploitation of maximum power. Therefore the benefits of replacing the original paper filter with BMC cotton air filter, produced using the same technology and materials as the F1 air filters, are evident.
DESIGN AND MATERIALS
Qualified engineers using advanced software and expert technicians using the latest technologies produce BMC air filters. An F1 filter must be very light, must be made of the best raw materials and must improve performance. For this reason we use only alloy mesh with epoxy coating to ensure protection from petrol fumes and from oxidization due to the humidity of the air. The filtering material is composed of a special cotton gauze soaked with low-viscosity oil to give you the best air permeability.
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
This is sold as PAIR. There are 2 per car.
This Product Fits:
Porsche 911 (991) 3.4 L 2012-2014
Porsche 911 (991) 3.6L 2013-2014
Porsche 911 (991) 3.8L Carrera 2012-2014
Porsche 911 (991) 3.8L GT3 2013-2014
K&N® washable, reusable High-Flow Air Filters™ feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower.
Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's 10-Year/Million Mile Limited Warranty.
K&N drop-in replacement filters are designed to install easily into your factory air box.
Works with Original Equipment Manufacturer Vehicle Electronics.
Environmentally Friendly, K&N Reusable Air Filters
Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
33-2484
The product you are viewing cross references to these numbers
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
Fits:
Porsche 997 GT3 Cup
Porsche 991 GT3 Cup
These restrictors mount over the front of the intake throttle body and under the intake boot.
Take Control with Our Restrictor Plate Kit
Harness the power of your vehicle with our Restrictor Plate Kit. It’s designed for the late 997 and 991 air filter system. These precision machined restrictors mount over the front of the intake throttle body and under the intake boot.
What’s Included in Your Purchase
Your purchase includes a set of 10 distinct restrictor plates. This array provides a variety of restriction options. Hence, you can fine-tune your vehicle’s horsepower to your exact needs. This ensures optimal performance for any scenario.
This includes a set of 10 plates that fit over the front of the throttle housing under the intake boot. Easy to install and easy to remove as needed.
Ideal for NASA GTS Preparations
Are you prepping for NASA GTS? Our Restrictor Plate Frame is the perfect tool for you. It allows precise horsepower calibration. Consequently, you can achieve your desired performance level each time. We’ve tested this plate frame on a 996 cup car with fantastic results. The horsepower reduced smoothly, and the air/fuel ratio remained unaffected.
Why Choose Our Restrictor Plate Kit
Our Restrictor Plates offers precise horsepower control. It’s a must-have for racing enthusiasts and those seeking to tailor their vehicle’s performance. Experience the difference of custom tuning with this reliable, efficient tool. Invest in our Restrictor Plates and experience the thrill of tailored performance today.
Fits all 997 Cup and all 991 Cup
- Porsche 997 MKII GT3 2010>>
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
Can be adapted to various vehicles.
Filter height: 6 inch / 15cm
Filter diameter at base: 7 inch / 18cm
Funnel height: 8 inch / 20cm
Filter diameter at base: 3,5 inch / 9cm
Overall height: 13inch / 33cm
- Engine Modifications & Upgrades
- ECU Re-Mapping DIY
- Electronic Throttle Booster
- Hi Flow Air Filters
- Short GearShift Kits
- Performance Plenum
- ECU Reader / Fault Finder
- Fuel Additives
- Pedals / Floor Boards / Track Mats LHD Cars
- Pedals / Floor Boards / Track Mats RHD Cars
- Fire Extinguisher Mounts
- Brey-Krause Fire Extinguisher Mount
- Tow Eye Hooks & Tie Downs
- Track & Race Coolant Radiators
- Brake Hoses Stainless Steel Goodridge