Fabspeed Exhaust
Fits : all Porsche 993 Carrera vehicles 1994-1998 - 3.6L / 3.8L and engines
Fabspeed's RSR Header Muffler Kit is a full exhaust system developed for track use provides an aggressive exhaust note while adding horsepower, torque, and throttle response; available as single or dual outlet and with or without heat exchange. Works great on street cars too. This Header/Muffler kit is built from the ground up to optimize performance for the Porsche 993 Carrera. Beyond just improving horsepower, torque, and throttle response, this package will also reduce the overall weight of your car by 43 pounds, which improves handling and acceleration.
SOUND:
This kit is designed specifically for use on the track, but works well for street drivers who want an aggressive and track-inspired exhaust note.
POWER:
We developed every inch of it to bring out the aggressive performance that the Carrera is capable of. On our dyno we saw gains of 29whp and 25ft/lbs of tq.
FEATURES:
• Loud and aggressive cup car sound
• 1.75" / 45mm Header tubes, 26" long
• This system can be ordered with single or double outlets
• Maintain your factory in-cabin heat with the optional heat exchange on the headers
• Saves 43lbs from the rear of the vehicle with heat exchange option, and saves 47lbs without heat exchange option
• Constructed from mandrel bent T304L stainless steel
• Simple DIY bolt-on installation, no cutting or welding required
• All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty
NOTE:
This package can be purchased with a heat exchange on the headers that will help maintain the factory in-cabin heat. Without the exchange system, you'll save an additional 4 lbs, for a total of 47 pounds of weight reduction.
PURCHASE DISCLAIMER: Fabspeed Motorsport does not condone the use of emission defeat devices for any vehicles used on public streets or roadways. Fabspeed Motorsport will not tamper, remove, disable, or bypass emissions equipment on a motor vehicle in accordance with 40 CFR Section 86.1854.12(a)(3), Clean Air Act 40 CFR 1068.101(b). This includes software, known as tunes, that reprogram a motor vehicles electronic control module to alter engine performance and enable the removal of filters, catalysts, and other critical emissions controls.
Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.
Please note: It is illegal to fit this product for road use on type-approved vehicles first used on or after 1/3/2001
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR993RSRWH
The product you are viewing cross references to these numbers
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
Composite gaskets included.
+8HP and significantly more torque.
Saves 11lbs/5kg over stock catalytic converters.
This new modular system includes a 200 cell German imported sport catalytic converter and cat bypass option in one interchangeable system.
993 Sport Catalytic Converter X-Pipe is different for certain years. 1994-1996 1/2 993's and all 993 SUPERCUP cars (1994 to 1997 993CUP) have Bischoff oval 3 bolt flanges. 1996+1998 993's are all Gillett round 3 bolt flanges. YOU MUST CORRECTLY specify flange type when Ordering.
When in doubt go check especially the late 1995 and early 1996 cars as this was a "cross-over year" and flange style changed during the year.
T304 Stainless steel C.N.C mandrel bent with polished show car mirror shine.
Simple and easy Bolt-on and bolt-off when you need to!.
Best PROVEN performance value on the market.
Might require blanking plug (90012300920) and washer (90021901500). Available separately.
Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.
Please note: It is illegal to fit this product for road use on type-approved vehicles first used on or after 1/3/2001
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR993
The product you are viewing cross references to these numbers
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
Composite gaskets included.
+8HP and significantly more torque.
Saves 11lbs/5kg over stock catalytic converters.
This new modular system includes a 200 cell German imported sport catalytic converter and cat bypass option in one interchangeable system.
993 Sport Catalytic Converter X-Pipe is different for certain years. 1994-1996 1/2 993's and all 993 SUPERCUP cars (1994 to 1997 993CUP) have Bischoff oval 3 bolt flanges. 1996+1998 993's are all Gillett round 3 bolt flanges. YOU MUST CORRECTLY specify flange type when Ordering.
When in doubt go check especially the late 1995 and early 1996 cars as this was a "cross-over year" and flange style changed during the year.
T304 Stainless steel C.N.C mandrel bent with polished show car mirror shine.
Simple and easy Bolt-on and bolt-off when you need to!.
Best PROVEN performance value on the market.
Might require blanking plug (90012300920) and washer (90021901500). Available separately.
Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.
Please note: It is illegal to fit this product for road use on type-approved vehicles first used on or after 1/3/2001
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR993
The product you are viewing cross references to these numbers
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
• Fits all Porsche 993 Carrera WIDE BODY vehicles (1994-1998)
Our precision-engineered exhaust system for the Porsche 993 Carrera will open up the engine's airflow in order to increase performance where it counts. The high-quality T304L stainless steel upgrade will reduce the weight of the rear end by 15 pounds compared to the OEM system. This aftermarket performance exhaust is one of the easiest ways to see serious improvements, with a boost of 14 horsepower coming from the upgrade. And to complete this hardware upgrade, our optional Deluxe Oval Style Tips are the perfect compliment to this exhaust to further enhance your vehicles look and style.
SOUND: Unleash a more throaty sports car sound while still maintaining daily drive-ability by possessing various sound deadening characteristics with an outcome that encompasses a refined and intoxicating sound.
POWER: Our Maxflo muffler design incorporates a high-flowing path for the exhaust gases to travel versus the much more restrictive factory muffler. On our dyno we saw 14whp at the peak.
FEATURES:
• Reuse your factory OEM tips or upgrade to • Fabspeed Deluxe Oval Style Tips in your choice of finish
• Adds +14 whp
• Saves 1 lbs / 0.4 KGs compared to the factory exhaust system
• Cat-Back system is 50 state Emissions legal
• Constructed from mandrel bent T304L stainless steel
• Simple DIY bolt-on installation, no cutting or welding required
• All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty
NOTE:
The original factory ball-joint clamps must be re-used when installing Fabspeed exhaust products on all 993 Carrera vehicles.
Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR993MAX
The product you are viewing cross references to these numbers
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
Bischoff style flanges (1994-1996/05)
High-quality performance headers provide better throttle response and power throughout the RPM range.
Our Porsche header upgrades are built to unleash the horsepower from your 993 Carrera. High quality T304L stainless steel is precisely bent and shaped to provide the optimal airflow for your engine. These OEM replacement components will shed 10 pounds from the weight of your Carrera while adding power and torque across the power band.
Simply choose either style, Bischoff or Gillet style flange, for your Porsche 993 is equipped with from the drop down above. Once you have these headers, they can be installed easily without the need for adapters, cutting, or welding. These headers are not fitted with heat exchange boxes meaning they cannot help regulate your car's temperature. That makes these headers ideal for track use or in areas with warmer climates.
FEATURES:
• Fits all Porsche 993 Carrera vehicles 1994-1998 3.6 liter and 3.8 liter engines and larger (OEM Style Fitment)
• Recommended for track use or for warmer climates, as these headers do not have heat exhange boxes to provide hot air to the interior.
• Features 3-into-1 high velocity merge collector and 1.75" / 45mm equal length header tubes
• Constructed from high-quality 14-16ga CNC mandrel-bent T304L stainless steel for optimum flow and maximum durability
• Simple bolt-on installation; no cutting or welding required
• All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty
INSTALLATION NOTE: To ensure proper header seal, after initial heat cycle, tighten all exhaust bolts to the OEM torque specs.
Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR993SHDRWOHB
The product you are viewing cross references to these numbers
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
Gillet style flanges (1996-1998)
High-quality performance headers provide better throttle response and power throughout the RPM range.
Our Porsche header upgrades are built to unleash the horsepower from your 993 Carrera. High quality T304L stainless steel is precisely bent and shaped to provide the optimal airflow for your engine. These OEM replacement components will shed 10 pounds from the weight of your Carrera while adding power and torque across the power band.
Simply choose either style, Bischoff or Gillet style flange, for your Porsche 993 is equipped with from the drop down above. Once you have these headers, they can be installed easily without the need for adapters, cutting, or welding. These headers are not fitted with heat exchange boxes meaning they cannot help regulate your car's temperature. That makes these headers ideal for track use or in areas with warmer climates.
FEATURES:
• Fits all Porsche 993 Carrera vehicles 1994-1998 3.6 liter and 3.8 liter engines and larger (OEM Style Fitment)
• Recommended for track use or for warmer climates, as these headers do not have heat exhange boxes to provide hot air to the interior.
• Features 3-into-1 high velocity merge collector and 1.75" / 45mm equal length header tubes
• Constructed from high-quality 14-16ga CNC mandrel-bent T304L stainless steel for optimum flow and maximum durability
• Simple bolt-on installation; no cutting or welding required
• All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty
INSTALLATION NOTE: To ensure proper header seal, after initial heat cycle, tighten all exhaust bolts to the OEM torque specs.
Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR993SHDRWOHG
The product you are viewing cross references to these numbers
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Standard Silencers / Mufflers
- Sport Silencers / Mufflers
- All Silencers / Mufflers
- Catalyst / Bypass
- Manifold / Headers
- Exhaust Tail Pipes
- Heat Exchangers
- Exhaust Package
- Exhaust Gaskets
- Exhaust Nuts / Bolts / Studs
- Brackets / Clamps / Straps
- Exhaust Fitting Kits
- Sport Exhaust Vacuum Parts
- Lambda Sensors / Probes
- Lambda Sensor Extensions