KW HLS (Hydraulic Lift System)
Fits:
Porsche 997 C2 / C2S Coupé / Cabrio 07/2004 - 2012
Lowering FRONT / REAR: 20-45mm / 20-45mm
Adjustment FRONT / REAR: Thread / Thread
Mounting position hydraulics: FRONT
Damping adjustment: Rebound and Compression
Damping Material coilover: Stainless steel
Content of delivery: Set (Front + Rear) with HLS 2
KW Hydraulic Lift-System
Make life easy when negotiating obstacles for sporty cars with low ground clearance.
More ground clearance by the push of a button
With the HLS lift system you can lift your sports car or lowered vehicle to safely negotiate obstacles such as speedbumps, railroad crossings, road works, garages and underground car parks. Depending on the version of the HLS lift system your vehicle can be hydraulically lifted either at the front axle or on both axles by up to 45 mm.
KW Hydraulic Lift System
This prevents damage to your aerodynamic components, underbody protection or even oil sump. The lift system is available either as a vehicle-specific solution with or without a KW coilover kit, depending on the type of car and the model. If you cannot find your vehicle in our KW HLS product range, our engineers have also developed a universal lift system.
A great solution made by KW
For a wide range of super cars and general everyday cars our HLS is available as an application-specific solution. Included in the delivery are such parts as the hydraulic lines or hydraulic pump adapted to your vehicle, all components will fit perfectly to your sports car. No matter if you want to combine the HLS with your series suspension kit or our KW coilovers which are one of the worlds top aftermarket products, the choice is yours. Alpina, BMW M, Manthey, Mercedes-Benz AMG, Novitec Rosso and many other well-known companies of the international automotive industry place their trust in KW coilover kits.
The lift kit "HLS 2" is only installed on the front axle. "HLS 4" allows you to lift the entire vehicle. A hydraulic cylinder is installed between spring plate and springs of each KW strut. The great advantage of the hydraulic system is that driving dynamics are not affected. The delivery content for all HLS lift kit versions include a control unit, which is connected to the vehicles on-board electronics. The vehicle will be automatically lowered at a certain speed to the original level of the KW coilover kit or your series suspension.
- available as complete solution including KW coilovers
- or as a conversion kit
- can be activated from inside the vehicle via an LED
- control button or by an optional remote control
- can be activated while driving (up to 80 km/h)
- fast lifting within 4-5 seconds (HLS 2)
- absolutely corrosion restistant (coated cylinder components made of aluminum)
This product is a special order item allow 24 working days - 8 weeks for delivery.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
35271215
The product you are viewing cross references to these numbers
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
Fits:
Porsche 997 C2 / C2S Coupé / Cabrio 07/2004 - 2012
Lowering FRONT / REAR: 20-45mm / 20-45mm
Adjustment FRONT / REAR: Thread / Thread
Mounting position hydraulics: FRONT + REAR
Damping adjustment: Rebound and Compression Damping
Material coilover: Stainless steel
Content of delivery: Set (FRONT + REAR) with HLS 4
KW Hydraulic Lift-System
Make life easy when negotiating obstacles for sporty cars with low ground clearance.
More ground clearance by the push of a button
With the HLS lift system you can lift your sports car or lowered vehicle to safely negotiate obstacles such as speedbumps, railroad crossings, road works, garages and underground car parks. Depending on the version of the HLS lift system your vehicle can be hydraulically lifted either at the front axle or on both axles by up to 45 mm.
KW Hydraulic Lift System
This prevents damage to your aerodynamic components, underbody protection or even oil sump. The lift system is available either as a vehicle-specific solution with or without a KW coilover kit, depending on the type of car and the model. If you cannot find your vehicle in our KW HLS product range, our engineers have also developed a universal lift system.
A great solution made by KW
For a wide range of super cars and general everyday cars our HLS is available as an application-specific solution. Included in the delivery are such parts as the hydraulic lines or hydraulic pump adapted to your vehicle, all components will fit perfectly to your sports car. No matter if you want to combine the HLS with your series suspension kit or our KW coilovers which are one of the worlds top aftermarket products, the choice is yours. Alpina, BMW M, Manthey, Mercedes-Benz AMG, Novitec Rosso and many other well-known companies of the international automotive industry place their trust in KW coilover kits.
The lift kit "HLS 2" is only installed on the front axle. "HLS 4" allows you to lift the entire vehicle. A hydraulic cylinder is installed between spring plate and springs of each KW strut. The great advantage of the hydraulic system is that driving dynamics are not affected. The delivery content for all HLS lift kit versions include a control unit, which is connected to the vehicles on-board electronics. The vehicle will be automatically lowered at a certain speed to the original level of the KW coilover kit or your series suspension.
- available as complete solution including KW coilovers
- or as a conversion kit
- can be activated from inside the vehicle via an LED
- control button or by an optional remote control
- can be activated while driving (up to 80 km/h)
- fast lifting within 4-5 seconds (HLS 2)
- absolutely corrosion restistant (coated cylinder components made of aluminum)
This product is a special order item allow 24 working days - 8 weeks for delivery.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
35271415
The product you are viewing cross references to these numbers
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
Fits:
Porsche 997 C4 / C4S - Raises 25-45mm
KW HLS (Hydraulic Lift System) helping sport cars avoid road clearance difficulties
Raises the vehicle up to 45 mm
The HLS provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc.
Version HLS 2
HLS 2 which enables only the FRONT axles to be lifted and lowered
• For vehicles with with little road clearance
• Vehicle specific applications
• Activation of change in height by a small keychain transmitter avoiding the need to run additional wires through the vehicle
• Height changes can be done while the vehicle is moving, up to speeds of 80 km/h (50 mph)
• Automatically lowering of the vehicle
• With TÜV certificate
• Rubber bellows protect hydraulic cylinder, thereby providing long term durability.
This product is a special order item allow 24 working days - 8 weeks for delivery.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
19271219
The product you are viewing cross references to these numbers
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
Fits:
Porsche 997 GT3 - Raises 00-20mm
Porsche 997 GT3 RS - Raises 00-20mm
KW HLS (Hydraulic Lift System) helping sport cars avoid road clearance difficulties
Raises the vehicle up to 45 mm
The HLS provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc.
Version HLS 2
HLS 2 which enables only the FRONT axles to be lifted and lowered
• For vehicles with with little road clearance
• Vehicle specific applications
• Activation of change in height by a small keychain transmitter avoiding the need to run additional wires through the vehicle
• Height changes can be done while the vehicle is moving, up to speeds of 80 km/h (50 mph)
• Automatically lowering of the vehicle
• With TÜV certificate
• Rubber bellows protect hydraulic cylinder, thereby providing long term durability.
This product is a special order item allow 24 working days - 8 weeks for delivery.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
19271224
The product you are viewing cross references to these numbers
- Porsche 997 GT3 2007>>
Fits:
Porsche 997 Turbo - Raises 10-30mm
KW HLS (Hydraulic Lift System)
helping sport cars avoid road clearance difficulties
Raises the vehicle up to 45 mm
The HLS provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc.
Version HLS 2
HLS 2 which enables only the FRONT axles to be lifted and lowered
• For vehicles with with little road clearance
• Vehicle specific applications
• Activation of change in height by a small keychain transmitter avoiding the need to run additional wires through the vehicle
- Height changes can be done while the vehicle is moving, up to speeds of 80 km/h (50 mph)
• Automatically lowering of the vehicle
• With TÜV certificate
• Rubber bellows protect hydraulic cylinder, thereby providing long term durability.
Estimated Labour time to fit this kit is 8-10hrs. Depends on spec of the car and other conditions
This product is a special order item allow 24 working days -8 weeks for delivery.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
19271223
The product you are viewing cross references to these numbers
- Porsche 997 TURBO 2007>>
- Porsche 997 MKII Turbo 2009>>
Fits
Porsche 997 GT2 09/2007>>
KW HLS (Hydraulic Lift System) helping sport cars avoid road clearance difficulties
Raises the vehicle up to 45 mm
The HLS provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc.
Version HLS 2
HLS 2 which enables only the FRONT axles to be lifted and lowered
• For vehicles with with little road clearance
• Vehicle specific applications
• Activation of change in height by a small keychain transmitter avoiding the need to run additional wires through the vehicle
• Height changes can be done while the vehicle is moving, up to speeds of 80 km/h (50 mph)
• Automatically lowering of the vehicle
• With TÜV certificate
• Rubber bellows protect hydraulic cylinder, thereby providing long term durability.
This product is a special order item allow 24 working days - 8 weeks for delivery.
- Porsche 997 GT2 2007>>
Fits
Porsche 997 GT3
Porsche 997 GT3 RS
KW HLS (Hydraulic Lift System)
helping sport cars avoid road clearance difficulties
Raises the vehicle up to 45 mm
The HLS provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc.
Version HLS 2
HLS 2 which enables only the front axles to be lifted and lowered
- For vehicles with with little road clearance
- Vehicle specific applications
- Activation of change in height by a small keychain transmitter
avoiding the need to run additional wires through the vehicle
- Height changes can be done while the vehicle is moving, up to speeds of 80 km/h (50 mph)
- Automatically lowering of the vehicle
- With TÜV certificate
- Rubber bellows protect hydraulic cylinder, thereby providing long term durability.
Estimated Labour time to fit this kit is 8-10hrs. Depends on spec of the car and other conditions
This product is a special order item allow 24 working days -8 weeks for delivery.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
19271624
The product you are viewing cross references to these numbers
- Porsche 997 GT3 2007>>
Fits
Porsche 997 C2 - Raises 20-45mm
KW HLS (Hydraulic Lift System) helping sport cars avoid road clearance difficulties
Raises the vehicle up to 45 mm
The HLS provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc.
Version HLS 2
HLS 2 which enables only the FRONT axles to be lifted and lowered
• For vehicles with with little road clearance
• Vehicle specific applications
• Activation of change in height by a small keychain transmitter avoiding the need to run additional wires through the vehicle
• Height changes can be done while the vehicle is moving, up to speeds of 80 km/h (50 mph)
• Automatically lowering of the vehicle
• With TÜV certificate
• Rubber bellows protect hydraulic cylinder, thereby providing long term durability.
This product is a special order item allow 24 working days - 8 weeks for delivery.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
19271215
The product you are viewing cross references to these numbers
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
Fits:
Porsche 997 C2
Front = Raises 20-45mm
Rear = Raises 20-45mm
KW HLS (Hydraulic Lift System)
helping sport cars avoid road clearance difficulties
Raises the vehicle up to 45 mm
The HLS provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc.
Version HLS 4
HLS 4 which enables FRONT & REAR axles to be lifted and lowered
• For vehicles with with little road clearance
• Vehicle specific applications
• Activation of change in height by a small keychain transmitter avoiding the need to run additional wires through the vehicle
• Height changes can be done while the vehicle is moving, up to speeds of 80 km/h (50 mph)
• Automatically lowering of the vehicle
• With TÜV certificate
• Rubber bellows protect hydraulic cylinder, thereby providing long term durability.
This product is a special order item allow 24 working days - 8 weeks for delivery.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
19271415
The product you are viewing cross references to these numbers
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
Fits:
Porsche 997 C4 / C4S
Front = Raises 20-45mm
Rear = Raises 10-40mm
KW HLS (Hydraulic Lift System)
helping sport cars avoid road clearance difficulties
Raises the vehicle up to 45 mm
The HLS provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc.
Version HLS 4
HLS 4 which enables FRONT & REAR axles to be lifted and lowered
• For vehicles with with little road clearance
• Vehicle specific applications
• Activation of change in height by a small keychain transmitter avoiding the need to run additional wires through the vehicle
• Height changes can be done while the vehicle is moving, up to speeds of 80 km/h (50 mph)
• Automatically lowering of the vehicle
• With TÜV certificate
• Rubber bellows protect hydraulic cylinder, thereby providing long term durability.
This product is a special order item allow 24 working days - 8 weeks for delivery.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
19271419
The product you are viewing cross references to these numbers
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
Fits:
Porsche 997 GT3
Front = Raises 00-20mm
Rear = Raises 00-20mm
Porsche 997 GT3 RS
Front = Raises 00-20mm
Rear = Raises 00-20mm
KW HLS (Hydraulic Lift System)
helping sport cars avoid road clearance difficulties
Raises the vehicle up to 45 mm
The HLS provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc.
Version HLS 4
HLS 4 which enables FRONT & REAR axles to be lifted and lowered
• For vehicles with with little road clearance
• Vehicle specific applications
• Activation of change in height by a small keychain transmitter avoiding the need to run additional wires through the vehicle
• Height changes can be done while the vehicle is moving, up to speeds of 80 km/h (50 mph)
• Automatically lowering of the vehicle
• With TÜV certificate
• Rubber bellows protect hydraulic cylinder, thereby providing long term durability.
This product is a special order item allow 24 working days - 8 weeks for delivery.
- Porsche 997 GT3 2007>>
Fits:
Porsche 997 Turbo
Front = Raises 10-30mm
Rear = Raises 10-30mm
KW HLS (Hydraulic Lift System)
helping sport cars avoid road clearance difficulties
Raises the vehicle up to 45 mm
The HLS provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc.
Version HLS 4
HLS 4 which enables FRONT & REAR axles to be lifted and lowered
• For vehicles with with little road clearance
• Vehicle specific applications
• Activation of change in height by a small keychain transmitter avoiding the need to run additional wires through the vehicle
• Height changes can be done while the vehicle is moving, up to speeds of 80 km/h (50 mph)
• Automatically lowering of the vehicle
• With TÜV certificate
• Rubber bellows protect hydraulic cylinder, thereby providing long term durability.
This product is a special order item allow 24 working days -8 weeks for delivery.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
19271423
The product you are viewing cross references to these numbers
- Porsche 997 TURBO 2007>>
- Porsche 997 MKII Turbo 2009>>
Fits:
Porsche 997 GT2 09/2007>>
KW HLS (Hydraulic Lift System)
helping sport cars avoid road clearance difficulties
Raises the vehicle up to 45 mm
The HLS provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc.
Version HLS 4
HLS 4 covers both the front and rear axles of the vehicle
• For vehicles with with little road clearance
• Vehicle specific applications
• Activation of change in height by a small keychain transmitter avoiding the need to run additional wires through the vehicle
• Height changes can be done while the vehicle is moving, up to speeds of 80 km/h (50 mph)
• Automatically lowering of the vehicle
• With TÜV certificate
• Rubber bellows protect hydraulic cylinder, thereby providing long term durability.
This product is a special order item allow 24 working days - 8 weeks for delivery.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
19271828
The product you are viewing cross references to these numbers
- Porsche 997 GT2 2007>>
Fits:
Porsche 997 GT3
Porsche 997 GT3 RS
KW HLS (Hydraulic Lift System)
helping sport cars avoid road clearance difficulties
Raises the vehicle up to 45 mm
The HLS provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc.
Version HLS 4
HLS 4 covers both the front and rear axles of the vehicle
• For vehicles with with little road clearance
• Vehicle specific applications
• Activation of change in height by a small keychain transmitter
avoiding the need to run additional wires through the vehicle
• Height changes can be done while the vehicle is moving, up to speeds of 80 km/h (50 mph)
• Automatically lowering of the vehicle
• With TÜV certificate
• Rubber bellows protect hydraulic cylinder, thereby providing long term durability.
This product is a special order item allow 24 working days - 8 weeks for delivery.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
19271824
The product you are viewing cross references to these numbers
- Porsche 997 GT3 2007>>
KW HLS (Hydraulic Lift System) helping sport cars avoid road clearance difficulties Raises the vehicle up to 45 mm The HLS provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby he
- Strut Brace
- Anti Roll Sway Bar
- Lowering Springs
- Control Arms Front
- Control Arms Rear
- Drop links Front
- Drop links Rear
- Engine mounts
- Gearbox mounts
- Top mounts Front
- Top mounts Rear
- Steering Track Rods
- Front Sub frame
- Rear Sub Frame
- Air Lift System
- Suspension Control Units
- Roll Cages
- Bilstein B4 Standard Replacement
- Bilstein B4 (Cars with PASM Button)
- Bilstein SPORT B6 Dampers
- Bilstein SPORT B6 (Cars with PASM Button)
- Bilstein SPRINT B8 Dampers
- Bilstein SPRINT B8 (Cars with PASM Button)
- Bilstein B12 Tuning Suspension Kit
- Bilstein B14 PSS Coilover Suspension Kits
- Bilstein B16 PSS9/10 Height Damping Adjustable Coilover Kit
- Bilstein B16 DampTronic (PASM)
- Bilstein EVO SE
- Ohlins Road & Track Suspension
- Superpro Polyurethane Bushes
- Powerflex Polyurethane Bushes
- Powerflex Black Series Bushes
- H&R Adjustable Suspension Kits
- H&R Cup-Kit Sport Suspension
- KW Variant 1 Inox Suspension kits
- KW Variant 2 Inox Adjustable Rebound Damping Suspension
- KW Variant 3 Adjustable Suspension kits
- KW Clubsport Coilover Suspension Kits
- KW Clubsport Coilover Suspension Kits WITH Top Mounts
- KW DDC with ECU Coilover Kit
- Eibach Pro-Tronic PASM Cancellation Kits
- Sachs Performance Suspension CSS
- Nitron Automotive Range