Harness Belts
Specifications:
– Model: Ultralite
– Homologation: FIA 8854:98
– Buckle Type: Quick Release Buckle
– Lap Adjusters: 75mm Aluminium
– Buckle Fixed Point: Right Hand Lap Strap
• Smooth running aluminium adjusters all around
• Snap hook fixings all around
• Option for the shoulder straps to wrap around roll cage if required
• Securing tab for intercom cables on the shoulder strap
• Thumb loops on lower shoulder straps
• FHR Compatible
The 4pt Magnum Ultralite Harness has smooth running professional alluminium adjusters on the shoulder and lap straps. Snap hook fixings are fitted all round. The shoulder straps can be wrapped around the roll cage if required.
The Ultralite harness is very popular with endurance competitors who share a car because of the fast and easy adjustment of the alluminium adjusters. This helps save time during driver change pit stops. TRS' light weight 140 gram quick release buckle is of composite construction and is attached to the right hand lap strap on 4 point harnesses.
Innovative features such as, a securing tab for intercom cables on the shoulder strap, thumb loops on lower shoulder straps and Velcro patches on lap straps were all pioneered by TRS and are standard on all of our competition harnesses.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
21C406
The product you are viewing cross references to these numbers
2" Shoulder belt, 2" Lap Belt
Frontal Head Restraints (FHR) or HANS Device MUST be used with these belts
Fits
981 Porsche Cayman - Road or Race Car
981 Porsche Cayman GT4 - Road or Race Car
Blue, Yellow and Silver belts made to order.
• Lap belt width - 2" (50mm)
• Shoulder belt width - 2" (50mm)
• Lap belt adjusters - Pull Up
• FHR specific - YES
• Homologation - FIA 8853-2016
Please note: Delivery time is normally 4-6 weeks.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94680
The product you are viewing cross references to these numbers
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
B23 brackets allow snap-on kit installation where eye bolts space is tight or access to the anchor point and seat adjustment is restricted.
Two brackets supplied, each with bolts.
Not FIA approved as shown
Please note: Delivery time is normally 4-6 weeks.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
01324
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 R 4.0L (500 Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
Specifications:
– Model: Standard
– Homologation: ECE 16.06
– Buckle Type: Push Button
– Lap Adjusters: 50mm Steel
– Buckle Fixed Point: Right Hand Lap Strap
• ECE regulation 16.06 homologated for use on public roads.
• Shoulder straps are adjustable to suit all normal saloon cars.
• A short shoulder version is available for two seater kit cars. A fitting kit is included.
The 3 point budget harness is a road legal harness which has 2" shoulder and lap straps with clip in end fittings which are supplied with eye bolts and a push button release buckle.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
21A300
The product you are viewing cross references to these numbers
Specifications:
– Model: Standard
– Homologation: ECE 16.06
– Buckle Type: Push Button
– Lap Adjusters: 50mm Steel
– Buckle Fixed Point: Right Hand Lap Strap
• ECE regulation 16.06 homologated for use on public roads.
• Shoulder straps are adjustable to suit all normal saloon cars.
• A short shoulder version is available for two seater kit cars.
The TRS 4 point budget harness is a road legal harness from TRS which has 2" shoulder and lap straps with clip in end fittings which are supplied with eye bolts and a push button release buckle.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
21A400
The product you are viewing cross references to these numbers
Specifications:
– Model: Standard
– Homologation: FIA 8854:98
– Buckle Type: Quick Release Buckle
– Lap Adjusters: 75mm Steel
– Buckle Fixed Point: Right Hand Lap Strap
• Steel anti-creep adjusters
• Snap hook fixings all around
• Option for the shoulder straps to wrap around roll cage if required
• Securing tab for intercom cables on the shoulder strap
• Thumb loops on lower shoulder straps
• FHR Compatible
The 4pt Magnum Harness has steel anti-creep adjusters and snap hook fixings all round. The shoulder straps can be wrapped around the roll cage if required.TRS' light weight 140 gram quick release buckle is of composite construction and is attached to the right-hand lap strap on 4 point harnesses.
Innovative features such as, a securing tab for intercom cables on the shoulder strap, thumb loops on lower shoulder straps and Velcro patches on lap straps were all pioneered by TRS and are standard on all of our competition harnesses.
A variety of attachment points are available on request – please see the attached spec sheet detailing the options.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
21C400
The product you are viewing cross references to these numbers
Specifications:
– Model: Superlite
– Homologation: FIA 8854:98
– Buckle Type: Quick Release Buckle
– Lap Adjusters: 75mm Steel
– Buckle Fixed Point: Right Hand Lap Strap
• Smooth running aluminium adjusters on the shoulders
• Steel anti-creep adjusters on the laps
• Snap hook fixings all around
• Option for the shoulder straps to wrap around roll cage if required
• Securing tab for intercom cables on the shoulder strap
• Thumb loops on lower shoulder straps
• FHR Compatible
The Magnum Superlite 4 Point Harness has steel anti-creep adjusters on the lap straps and smooth running professional aluminium adjusters on the shoulder straps. Snap hook fixings are fitted all round.
The shoulder straps can be wrapped around the roll cage if required. TRS' light weight 140 gram quick release buckle is of composite construction and is attached to the right hand lap strap on 4 point harnesses.
Innovative features such as, a securing tab for intercom cables on the shoulder strap, thumb loops on lower shoulder straps and Velcro patches on lap straps were all pioneered by TRS and are standard on all of our competition harnesses.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
21C405
The product you are viewing cross references to these numbers
Sold Individually
Reinforcement plate with welded in nut to mount eye bolts
Dimensions
50mm x 80mm
welded nut 7/16"
Please note: Delivery time is normally 4-6 weeks.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
00080
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 R 4.0L (500 Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
Finish: Black
Fits:
Porsche 981 Cayman / S / GT4 2014>>
Porsche 718 (982) Cayman
The RSS "950/30 - Light Weight" Series 2pt Harness Bar was designed for the "Weight conscious Porsche owners who know that ounces equal pounds and pounds reduce performance."
Engineered to maximize function, add rigidity, minimize added weight (+7 lbs), offer generous occupant seating space and integrate with interior. The Bar is a safety inspired design which secures safety harnesses directly behind the occupants shoulders. One piece bar design that mounts to the chassis cross member and does not effect rearward visibility. The Bar allows generous seat base travel with standard, OE bucket or racing bucket seats. Retains use of factory seat belts. Bolt-In installation, carpet, panel and tab trimming is required, Professional installation is recommended for a factory installed look. Designed, constructed and powder coated at RSS utilizing 1.50 inch DOM with precision cut reinforced mounting plates. Patent Pending Design.
Images May Not be Vehicle Specific. For Display Purposes Only.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
950
The product you are viewing cross references to these numbers
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
2" Shoulder belt, 2" Lap Belt
Frontal Head Restraints (FHR) or HANS Device MUST be used with these belts
Fits
Porsche 981 Cayman - Road or Race Car
Porsche 981 Cayman GT4 - Road or Race Car
Porsche 991 Coupe - Road or Race Car
Red belts made to order.
Enduro harness - uper belt with fast adjustment - the super easy pull down adjustment is ideal for driver changes as used by top OEMs and race teams world-wide.
• Lap belt width - 2" (50mm)
• Shoulder belt width - 2" (50mm)
• Lap belt adjusters - Pull Up
• FHR specific - YES
• Homologation - FIA 8853-2016
Please note: Delivery time is normally 4-6 weeks.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94720
The product you are viewing cross references to these numbers
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 R 4.0L (500 Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
Sold Individually
7/16" thread eye bolt available in either 22mm or 38mm length
For use with SCHROTH Snap-On Kit
Please note: Delivery time is normally 4-6 weeks.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
000
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 R 4.0L (500 Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
3" Shoulder belt, 2" Lap Belt
Frontal Head Restraints (FHR) or HANS Device NOT required with these belts
Fits
Porsche 981 Cayman - Road or Race Car
Blue, Yellow and Silver belts made to order.
• Lap belt width - 2" (50mm)
• Shoulder belt width - 3" (75mm)
• Lap belt adjusters - Pull Up
• FHR specific - No
• Homologation - FIA 8853-2016
Please note: Delivery time is normally 4-6 weeks.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94670
The product you are viewing cross references to these numbers
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
Towing Strap with bendable stainless steel bolt-on hardware for up to 7/16" or max 1/2" bolt.
Available in two lengths, one fixed at 100 mm (4") and an adjustable version up to 400 mm (16")
Please check securing bolt size before ordering
Capable of pulling over 1800 kg (4000 lbs) and meets German DMSB standard and FIA appendix J for minimum size towing straps.
Colour - Red
Please note: Delivery time is normally 4-6 weeks.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9037
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 R 4.0L (500 Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
To convert roll bar mounted shoulder straps to a snap hook fitting you will need this kit.
It can also be used on any other part of a harness, lap belt, crutch strap, or shoulder belt.
If being used on the 3" webbing, fold the edges of the webbing in.
Kit Includes
2 x snap-on brackets (B 14)
2 x eye bolts (SG 23) with 22 mm length.
• Suitable for 2" and 3" webbing
• Spring loaded
• Complete with split pins and 7/16" UNF eye bolts
Supplied as a pair
Please note: Delivery time is normally 4-6 weeks.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1312
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 R 4.0L (500 Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
Fits: Left or Right, RHD or LHD Cars
DesignTek 6 point is a professional saloon race / rally harness with 3" wide shoulder and lap straps with clip on fittings. Featuring ultra lightweight alloy adjusters on the shoulder straps with an option of having the same adjusters on the lap belts.
The buckle is a aircraft style quick release.
- FIA Approved
- Suitable For Saloon Car Racing Or Rally Cars
- Professional Lightweight Alloy Adjusters
- 3" Wide Shoulder And Lap Belts
- Clip On Fixings
- Eye Bolts Supplied
- Lightweight Twist Buckle Release
6 colours:
Black, Blue, Green, Red, Silver, Yellow