Retro Performance

这是一款全新 12V 飞轮 200mm 转换飞轮，可将保时捷 356、912 和 36HP 大众发动机安装到后期大众变速箱中。

#复古表演#

适合：保时捷 356 / 912

它的深度为 20.5 毫米，专为 200 毫米大众离合器而设计，具有经过热处理的 12 伏大众齿圈。

重量：12磅
离合器深度：20.5mm
牙齿数量：130

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

008200F12VW

您正在查看的产品与这些编号存在交叉引用关系

This a brand new forged chromoly flywheel it is manufactured to exact specifications.
Works with OEM Porsche 200mm clutch.



Fits: for Porsche 356

All flywheels are drilled for 8 dowel pins (SPG Pattern). Features a heat treated ring gear.

Weight: 13LB
Clutch Depth: 25mm

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

008200FW

您正在查看的产品与这些编号存在交叉引用关系

This a brand new forged chromoly flywheel it is manufactured to exact specifications. Works with all 200mm VW Type 1 Clutches.



Fits: for Porsche 356

All flywheels are drilled for 8 dowel pins(SPG Pattern). Features a heat treated ring gear.

Weight: 12LB
Clutch Depth: 20.5mm

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

008200FVW

您正在查看的产品与这些编号存在交叉引用关系

This a brand new forged chromoly flywheel it is manufactured to exact specifications, 180 mm.

Fits: For early 356

All flywheels are drilled for 8 dowel pins (SPG Pattern). Features a heat treated ring gear.

Weight: 14LB
Clutch Depth: 24mm

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

008180FW

您正在查看的产品与这些编号存在交叉引用关系

这是一个全新的锻造铬钼库存替换飞轮。

#复古表演#

适合： 215 保时捷 914

它是按照精确的规格制造的。具有经过热处理的 12V 齿圈。
重量：18磅

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

008215FW

您正在查看的产品与这些编号存在交叉引用关系

这是一套全新的加长 H 型梁连杆，适用于大众 Type 4 和保时捷 914 风冷发动机

#复古表演#

这些是锻造铬钼钢，配有高强度 5/16 英寸 ARP 型连杆螺栓。这些连杆是对专为冲程发动机制造的原装 2.0 连杆的重大升级。

我们有 3 种不同长度可供选择：5.325 英寸、5.500 英寸和 5.700 英寸，带 22 毫米销钉。更坚固的 ARP 2000 螺栓也可作为 200K 螺栓的升级版。

发动机：风冷 VW Type 4/保时捷 914
长度：5.325 英寸、5.500 英寸或 5.700 英寸
类型：2.0 期刊
螺栓类型：200k 或 ARP 2000

*** 选择杆尺寸，如果您想升级下面的杆螺栓 ***

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0045

您正在查看的产品与这些编号存在交叉引用关系

这是一套全新的 H 型梁连杆，适用于大众 Type 4 和保时捷 914 风冷发动机

#复古表演#

这些是锻造铬钼钢，配有高强度 5/16 英寸 ARP 型连杆螺栓。这些连杆是专为冲程发动机制造的原装 2.0 连杆的重大升级。更坚固的 ARP 2000 螺栓也可作为 200K 螺栓的升级。

发动机：风冷 VW Type 4/保时捷 914
长度：5.158”
类型：2.0 期刊
螺栓类型：200k 或 ARP 2000

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0045158H

您正在查看的产品与这些编号存在交叉引用关系

This is a Brand New Forged 4340 Chromoly Counterweighted Crankshaft. These cranks are Nitrided for strength, micro polished, and Balanced within a gram.



Fits:
Porsche 356 C/SC & 912 Air Cooled Engine

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0084001S74

您正在查看的产品与这些编号存在交叉引用关系

这是一套新型 4 型 105 毫米平顶 JE 活塞和气缸。

#复古表演#

JE 锻件由 2618 铝制成，它们具有 0 偏移，顶部下方有额外的材料用于阀袋。大口径气缸在内部磨削以达到精确的公差。该套件配有 30.08 毫米压缩高度和 22 毫米销。较小的压缩高度允许您使用带有 22 毫米销的长杆构建 78 至 86 毫米的大冲程发动机，让您可以选择构建 2.4L 及更大的发动机。这是套件中的机器，您需要打开头部和外壳才能安装它们。

发动机类型：保时捷 914、大众 Type 4、巴士或 Sandrail。
发动机排量：2978cc，曲轴 86mm
行程：78至86mm
气缸：铸铁
活塞：锻造 JE
压缩高度：30.08mm
插针：22mm

套装包括： 4 个活塞、4 个气缸、4 个销钉和一组环

This is a new set of Type 4 104mm flat top JE Pistons and Cylinders.



JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pockets. The Big Bore Cylinders are honed in house to exact tolerances. This set comes with a 30.08mm Compression Height with a 22mm Pin. The smaller compression height allows you to build large stroked engines 78 to 86mm using longer rods that have the 22mm pins giving you the option to Build 2.4L and bigger Engines. This is a Machine in kit you will need to open both the Heads and Case to install them.

Engine Type : Porsche 914, VW Type 4, Bus or Sandrail.
Engine size: 2921cc with 86mm Crank
Stroke: 78 to 86mm
Cylinders: cast iron
Pistons: Forged JE
Compression Height: 30.08mm
Pin: 22mm

Set includes: 4 pistons, 4 cylinders, 4 pins and a set of rings

This is a new set of Type 4 103mm flat top JE Pistons and Cylinders.



JE Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pockets. The Big Bore Cylinders are honed in house to exact tolerances. This set comes with a 30.08mm Compression Height with a 22mm Pin. The smaller compression height allows you to build large stroked engines 78 to 86mm using longer rods that have the 22mm pins giving you the option to Build 2.3L and bigger Engines. This is a Machine in kit you will need to open both the Heads and Case to install them.

Engine Type : Porsche 914, VW Type 4, Bus or Sandrail.
Engine size: 2865cc with 86mm Crank
Stroke: 78 to 86mm
Cylinders: cast iron
Pistons: Forged JE
Compression Height: 30.08mm
Pin: 22mm

Set includes: 4 pistons, 4 cylinders, 4 pins and a set of rings

This is a new set of Type 4 105mm flat top JE Pistons and cylinders.



JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pockets. The Big Bore Cylinders are honed in house to exact tolerances. This set comes with a 34.6mm Compression Height and the 24mm Pin. The slightly smaller compression height allows you to easily build small stroked engines 71 to 78mm with the Standard length rods that have the 24mm pins giving you the option to Build 2.4L and bigger Engines. This is a Machine in kit you will need to open both the Heads and Case to install them.

Engine Type : Porsche 914, VW Type 4, Bus or Sandrail.
Engine size: 2458cc with 71mm crank
Stroke: 71 to 78mm
Cylinders: Cast Iron
Pistons: Forged JE
Compression Height: 34.60mm
Pin: 24mm

Set includes: 4 pistons, 4 cylinders, 4 pins and a set of rings

This is a new set of Type 4 104mm flat top JE Pistons and cylinders.



JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pockets. The Big Bore Cylinders are honed in house to exact tolerances. This set comes with a 34.6mm Compression Height and the 24mm Pin. The slightly smaller compression height allows you to easily build small stroked engines 71 to 78mm with the Standard length rods that have the 24mm pins giving you the option to Build 2.4L and bigger Engines. This is a Machine in kit you will need to open both the Heads and Case to install them.

Engine Type : Porsche 914, VW Type 4, Bus or Sandrail.
Engine size: 2412cc with 71mm crank
Stroke: 71 to 78mm
Cylinders: Cast Iron
Pistons: Forged JE
Compression Height: 34.60mm
Pin: 24mm

Set includes: 4 pistons, 4 cylinders, 4 pins and a set of rings

This is a new set of Type 4 103mm flat top JE Pistons and cylinders.



JE Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pockets. The Big Bore Cylinders are honed in house to exact tolerances. This set comes with a 34.6mm Compression Height and the 24mm Pin. The slightly smaller compression height allows you to easily build small stroked engines 71 to 78mm with the Standard length rods that have the 24mm pins giving you the option to Build 2.3L and bigger Engines. This is a Machine in kit you will need to open both the Heads and Case to install them.

Engine Type : Porsche 914, VW Type 4, Bus or Sandrail.
Engine size: 2365cc with 71mm crank
Stroke: 71 to 78mm
Cylinders: Cast Iron
Pistons: Forged JE
Compression Height: 34.60mm
Pin: 24mm

Set includes: 4 pistons, 4 cylinders, 4 pins and a set of rings

This is a new set of Type 4 2.0 liter 96mm flat top JE Pistons with Biral cylinders.



JE Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pockets. This set comes with a 34.6mm Compression Height and the 24mm Pin. The slightly smaller compression height allows you to easily build small stroked engines 71 to 78mm with the Standard length rods that have the 24mm pins. Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better.It is a Slip in kit no machine work is needed.

Engine Type : Porsche 914, VW Type 4, Bus or Sandrail.
Engine size: 2000cc
Stroke: 71 to 78mm
Cylinders: Biral
Pistons: Forged JE
Compression Height: 34.60mm
Pin: 24mm

Set includes: 4 pistons, 4 cylinders, 4 pins and a set of rings

This is a new set of Type 4 2.0 liter 96mm stroker flat top JE Pistons and Cylinders.



JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pockets. This set comes with a 30.08mm Compression Height with a 22mm Pin. The smaller compression height allows you to build large stroked engines 78 to 86mm using longer rods that have the 22mm pins. It is a Slip in kit no machine work is needed.

Engine Type : Porsche 914, VW Type 4, Bus or Sandrail.
Engine size: 2000cc
Stroke: 78 to 86mm
Cylinders: cast iron
Pistons: Forged JE
Compression Height: 30.08mm
Pin: 22mm

Set includes: 4 pistons, 4 cylinders, 4 pins and a set of rings

This is a new set of Type 4 2.0 liter 96mm flat top JE Pistons and cylinders.



JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pockets. This set comes with a 34.6mm Compression Height and the 24mm Pin. The slightly smaller compression height allows you to easily build small stroked engines 71 to 78mm with the Standard length rods that have the 24mm pins. It is a Slip in kit no machine work is needed.

Engine Type : Porsche 914, VW Type 4, Bus or Sandrail.
Engine size: 2000cc
Stroke: 71 to 78mm
Cylinders: Cast Iron
Pistons: Forged JE
Compression Height: 34.60mm
Pin: 24mm

Set includes: 4 pistons, 4 cylinders, 4 pins and a set of rings

This is a new set of 92mm Big Bore Porsche 911 2.7L High compression JE pistons & cylinders. The Compression ratio is 10.5:1 with the 70.4mm crank.



JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pockets. The Cast Iron Liners come with out the head gasket grove.

Engine size: 2.7
Stroke: 70.4
Cylinders: Cast Iron
Pistons: JE 2618 Forged
Dome CC: 25.5
Compression: 10.5:1

Kit includes: 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

00891192SJE

您正在查看的产品与这些编号存在交叉引用关系

This is a new set of 92mm Porsche 911 2.7L Low compression JE pistons & cylinders. The Compression ratio is 9.5:1 with the 70.4mm crank.



JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pockets. The Cast Iron Liners come with out the head gasket grove.

Engine size: 2.7
Stroke: 70.4
Cylinders: Cast Iron
Pistons: JE 2618 Forged
Dome CC: 19.7
Compression: 9.5:1

Kit includes: 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

00891192EJE

您正在查看的产品与这些编号存在交叉引用关系

This is a new set of 90mm Porsche 911 2.7L High compression JE pistons & cylinders. The Compression ratio is 10.5:1 with the 70.4mm crank.



JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pockets. The Cast Iron Liners come with out the head gasket grove.

Engine size: 2.7
Stroke: 70.4
Cylinders: Cast Iron
Pistons: JE 2618 Forged
Dome CC: 27.3
Compression: 10.5:1

Kit includes: 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

00891190SJE

您正在查看的产品与这些编号存在交叉引用关系

This is a new set of 90mm Porsche 911 2.7L Low compression JE pistons & cylinders. The Compression ratio is 9.5:1 with the 70.4mm crank.



JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pockets. The Cast Iron Liners come with out the head gasket grove.

Engine size: 2.7
Stroke: 70.4
Cylinders: Cast Iron
Pistons: JE 2618 Forged
Dome CC: 21.8
Compression: 9.5:1

Kit includes: 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

00891190EJE

您正在查看的产品与这些编号存在交叉引用关系

This is a new set of 86mm Porsche 911 2.2/2.4L CP Pistons with Biral cylinders.



CP Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pockets, CP kits come with wirelock pin clips for extreme RPM. Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better. This kit requires no machine work, when installing in factory Porsche case & heads

Engine size: 2.2/2.4L
Stroke: 66/70.4mm
Cylinders: Biral.
Pistons: CP 2618 Forged
Dome Height: .450
Compression: 9.5:1/10.7:1

Kit includes: 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and wirelocks with tool.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

00891186SCP

您正在查看的产品与这些编号存在交叉引用关系

This is a new set of 86mm Porsche 911 2.2/2.4L High compression JE Pistons with Biral cylinders.



The Compression ratios are 10.5:1 with the 66mm crank and 11.2:1 with the 70.4mm. JE Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pockets. Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better. This kit requires no machine work, when installing in factory Porsche case & heads

Engine size: 2.2/2.4L
Stroke: 66/70.4mm
Cylinders: Biral.
Pistons: JE 2618 Forged
Dome Height: .450
Compression: 10.5:1/11.2:1

Kit includes: 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

00891186SJE

您正在查看的产品与这些编号存在交叉引用关系

This is a new set of 86mm Porsche 911 2.2/2.4L low compression JE Pistons with Biral cylinders.



The Compression ratios are 9.2:1 with the 66mm crank and 9.5:1 with the 70.4mm. JE Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pockets. Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better. This kit requires no machine work, when installing in factory Porsche case & heads

Engine size: 2.2/2.4L
Stroke: 66/70.4mm
Cylinders: Biral.
Pistons: JE 2618 Forged
Dome Height: .300
Compression: 9.2:1/9.5:1

Kit includes: 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

00891186EJE

您正在查看的产品与这些编号存在交叉引用关系

This is a new set of 81mm Porsche 911 2.0L High compression JE pistons with Biral cylinders.



The Compression ratio is 9.5:1 with the 66mm crank. JE Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pockets. Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better. This kit requires no machine work, when installing in factory Porsche case & heads

Engine size: 2.0
Stroke: 66
Cylinders: Biral.
Pistons: JE 2618 Forged
Dome Height: .460
Compression: 9.5:1

Kit includes: 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

00891181SJE

您正在查看的产品与这些编号存在交叉引用关系

This is a new set of 86mm Porsche 911 2.2/2.4L High compression pistons with Biral cylinders. The Compression ratios are 9.5:1 with the 66mm crank and 10.7:1 with the 70.4mm.



The Cylinders are Biral with Graphite Coated Hypereutectic pistons with valve pockets, and the 22mm Pin. Biral Liners are a cast iron sleeve with aluminum fins, making them lighter and dissipate heat better. This kit requires no machine work, when installing in factory Porsche case & heads.

Engine size: 2.2/2.4L
Stroke: 66/70.4mm
Cylinders: Biral.
Pistons: Hypereutectic
Dome Height:
Compression: 9.5:1/10.7:1

Kit includes: 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

00891186S

您正在查看的产品与这些编号存在交叉引用关系

This is a new set of 84mm Porsche 911 2.2/2.4L High compression pistons with Biral cylinders. The Compression ratios are 9.1:1 with the 66mm crank and 9.7:1 with the 70.4mm.



The Cylinders are Biral with Graphite Coated Hypereutectic pistons with valve pockets, and the 22mm Pin. Biral Liners are a cast iron sleeve with aluminum fins, making them lighter and dissipate heat better. This kit requires no machine work, when installing in factory Porsche case & heads.

Engine size: 2.2/2.4L
Stroke: 66/70.4mm
Cylinders: Biral.
Pistons: Hypereutectic
Dome Height:
Compression: 9.1:1/9.7:1

Kit includes: 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

00891184S

您正在查看的产品与这些编号存在交叉引用关系

This is a new set of 84mm Porsche 911 2.2/2.4L low compression Pistons with Biral cylinders. The Compression ratios are 8.5:1 with the 66mm crank and 9.1:1 with the 70.4mm.


The Cylinders are Biral with Graphite Coated Hypereutectic pistons with valve pockets, and the 22mm Pin. Biral Liners are a cast iron sleeve with aluminum fins, making them lighter and dissipate heat better. This kit requires no machine work, when installing in factory Porsche case & heads.

Engine size: 2.2/2.4L
Stroke: 66/70.4mm
Cylinders: Biral.
Pistons: Hypereutectic
Dome Height:
Compression: 8.5:1/9.1:1

Kit includes 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

00891184E

您正在查看的产品与这些编号存在交叉引用关系

This is a new set 86mm Porsche 356/912 CP pistons with Biral cylinders.



It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece case. The Cylinders are Biral with CP Forged pistons with 30° Angle.

CP Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pocket, CP kits come with wirelock pin clips for extreme RPM. Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better . This kit requires no machine work, when installing in factory Porsche case & heads.

Engine size: 1600cc
Stroke: 74mm
Cylinders: Biral.
Pistons: CP 2618 Forged
Dome Height: .155
Compression: 9.5:1
Piston Angle: 30°

Kit includes: 4 Cylinders, 4 Pistons, A set of Piston Rings, and 4 wrist pins and wire locks with tool.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0081186PCP

您正在查看的产品与这些编号存在交叉引用关系

This is a new set 86mm Porsche 356/912 JE pistons with Biral cylinders.



It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece case. The Cylinders are Biral with JE Forged pistons with 30° Angle.

JE Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pocket, Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better . This kit requires no machine work, when installing in factory Porsche case & heads.

Engine size: 1600cc
Stroke: 74mm
Cylinders: Biral.
Pistons: JE 2618 Forged
Dome Height: .155
Compression: 9.5:1
Piston Angle: 30°

Kit includes: 4 Cylinders, 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0081186PJE

您正在查看的产品与这些编号存在交叉引用关系

This is a new set 86mm Porsche 356/912 JE pistons & cylinders.



It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece case. The Cylinders are Cast Iron with JE Forged pistons with 30° Angle.

JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pocket. This kit requires no machine work, when installing in factory Porsche case & heads.

Engine size: 1600cc
Stroke: 74mm
Cylinders: Cast Iron
Pistons: JE 2618 Forged
Dome Height: .155
Compression: 9.5:1
Piston Angle: 30°

Kit includes: 4 Cylinders, 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0081186CJE

您正在查看的产品与这些编号存在交叉引用关系

This is a new set 86mm Porsche 356/912 JE pistons with Biral cylinders.



It fits Porsche 356; A and B, Super 90, 1955-63 with the 3 piece Case. The Cylinders are Biral with JE Forged pistons with 22° Angle.

JE Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pocket, Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better . This kit requires no machine work, when installing in factory Porsche case & heads.

Engine size: 1600cc
Stroke: 74mm
Cylinders: Biral.
Pistons: JE 2618 Forged
Dome Height: .155
Compression: 9.5:1
Piston Angle: 22°

Kit includes: 4 Cylinders, 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0081186BJE

您正在查看的产品与这些编号存在交叉引用关系

这是一套全新的 86 毫米保时捷 356/912 JE 活塞和气缸。

#复古表演#

它适用于保时捷 356；A 和 B，Super 90，1955-63 年，带 3 件式外壳。气缸为铸铁，带 22° 角度的 JE锻造活塞。

JE 锻件由 2618 铝制成，它们具有 0 偏移，顶部下方有额外的材料用于阀袋。此套件在工厂保时捷箱体和头部安装时无需机械加工。

发动机排量：1600cc
行程：74mm
气缸：铸铁
活塞：JE 2618 锻造
圆顶高度：.155
压缩率：9.5:1
活塞角度：22°

套件包括： 4 个气缸、4 个活塞、一组活塞环以及 4 个活塞销和夹子。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0081186AJE

您正在查看的产品与这些编号存在交叉引用关系

This is a new set 83.5mm Porsche 356/912 JE High Compression pistons with Biral cylinders.



It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece case. The Cylinders are Biral with JE Forged pistons with 30° Angle.

JE Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pocket, Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better. This is a High Compression kit 11.5:1 more commonly used in race-cars . This kit requires no machine work, when installing in factory Porsche case & heads.

Engine size: 1600cc
Stroke: 74mm
Cylinders: Biral.
Pistons: JE 2618 Forged
Dome Height: .295
Compression: 11.5:1
Piston Angle: 30°

Kit includes: 4 Cylinders, 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0081183PJE

您正在查看的产品与这些编号存在交叉引用关系

This is a new set 83.5mm Porsche 356/912 JE High Compression pistons with Biral cylinders.



It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece case. The Cylinders are Biral with JE Forged pistons with 30° Angle.

JE Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pocket, Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better. This is a High Compression kit 9.5:1 more commonly used in race-cars . This kit requires no machine work, when installing in factory Porsche case & heads

Engine size: 1600cc
Stroke: 74mm
Cylinders: Biral.
Pistons: JE 2618 Forged
Dome Height: .295
Compression: 9.5:1
Piston Angle: 30°

Kit includes: 4 Cylinders, 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0081183CJE

您正在查看的产品与这些编号存在交叉引用关系

This is a new set 82.5mm Porsche 356/912 JE High Compression pistons with Biral cylinders.



It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece case. The Cylinders are Biral with JE Forged pistons with 30° Angle.

JE Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pocket, Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better. This is a High Compression kit 11.5:1 more commonly used in race-cars . This kit requires no machine work, when installing in factory Porsche case & heads

Engine size: 1600cc
Stroke: 74mm
Cylinders: Biral.
Pistons: JE 2618 Forged
Dome Height: .295
Compression: 11.5:1
Piston Angle: 30°

Kit includes: 4 Cylinders, 4 Pistons, A set Piston Rings, and 4 wrist pins and clips.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0081182PJE

您正在查看的产品与这些编号存在交叉引用关系

This is a new set of Big Bore 86mm Porsche 356/912 pistons with Biral cylinders.



It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece Case. The Cylinders are Biral with Graphite Coated Hypereutectic pistons with the 30° Angle, valve pockets, and the 22mm Pin. Biral Liners are a cast iron sleeve with aluminum fins, making them lighter and dissipate heat better. This kit requires no machine work, when installing in factory Porsche case & heads.

Engine size: 1600cc
Stroke: 74mm
Cylinders: Biral.
Pistons: Hypereutectic
Dome CC: 17
Compression: 9.2:1
Piston Angle: 30°

Kit includes: 4 Cylinders, 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0081186PB

您正在查看的产品与这些编号存在交叉引用关系

This is a new set of Big Bore 86mm Porsche 356/912 pistons and cylinders.



It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece Case. The Cylinders are cast iron with Graphite Coated Hypereutectic pistons with the 30° Angle, valve pockets, and the 22mm Pin. This kit requires no machine work, when installing in factory Porsche case & heads.

Engine size: 1600cc
Stroke: 74mm
Cylinders: Cast Iron.
Pistons: Hypereutectic
Dome CC: 17
Compression: 9.2:1
Piston Angle: 30°

Kit includes: 4 Cylinders, 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0081186PS

您正在查看的产品与这些编号存在交叉引用关系

这是一套新的大口径 86 毫米保时捷 356 活塞和气缸。

#复古表演#

它适用于保时捷 356；A 和 B，Super 90，1955-63 年，带 3 件式外壳。气缸为 Biral，带石墨涂层过共晶活塞，角度为 22°，带阀袋和 22 毫米销。此套件在工厂保时捷外壳和头部安装时无需机械加工。

发动机排量：1600cc
行程：74mm
气缸：双缸
活塞：过共晶
圆顶 CC：17
压缩率：9.2:1
活塞角度：22°

套件包括：4 个气缸、4 个活塞、一组活塞环以及 4 个活塞销和夹子。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0081186PE

您正在查看的产品与这些编号存在交叉引用关系

这是一套新的大口径 86 毫米保时捷 356 活塞和气缸。

#复古表演#

它适用于保时捷 356；A 和 B，Super 90，1955-63 年，带 3 件式外壳。气缸为铸铁，带石墨涂层过共晶活塞，角度为 22°，带阀袋和 22 毫米销。此套件在工厂保时捷外壳和头部安装时无需机械加工。

发动机排量：1600cc
行程：74mm
气缸：铸铁
活塞：过共晶
圆顶 CC：17
压缩率：9.2:1
活塞角度：22°

套件包括： 4 个气缸、4 个活塞、一组活塞环以及 4 个活塞销和夹子。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0081186PA

您正在查看的产品与这些编号存在交叉引用关系