FibreTek

后扰流唇 ABS 塑料

适合：
保时捷 991 Carrera 2S / Carrera 4S - 2019 年起

这款 ABS 塑料后扰流板非常适合为您的 991 赋予 OEM+ 外观，同时为经典保时捷设计增添现代气息。
该扰流板由 ABS 制成（可上漆），采用最先进的制造技术在工厂进行装配和加工。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

992827952D

您正在查看的产品与这些编号存在交叉引用关系

后扰流唇碳纤维。

适合：
保时捷 991 Carrera 2S / Carrera 4S - 2019 年起

这款碳纤维后扰流板非常适合用来为您的 991 赋予 OEM+ 外观，同时为经典的保时捷设计增添现代气息。
该扰流板由碳纤维制成，采用最先进的制造技术，在工厂进行装配和加工。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

992827952D

您正在查看的产品与这些编号存在交叉引用关系

后扰流唇碳纤维。

适合：
保时捷 991 Carrera 2 / Carrera 4 - 2012 年至 2019 年
保时捷 991 Carrera 2S / Carrera 4S - 2012 年至 2019 年

这款碳纤维后扰流板非常适合用来为您的 991 赋予 OEM+ 外观，同时为经典的保时捷设计增添现代气息。
该扰流板由碳纤维制成，采用最先进的制造技术，在工厂进行装配和加工。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99150462100

您正在查看的产品与这些编号存在交叉引用关系

前保险杠下扰流板 - 非 Aerokit

适合：
保时捷 992 turbo S - 2019 年起
适用于未配备 Aerokit 的汽车

前保险杠下前扰流板由 FRP（玻璃纤维增强塑料）制成，需涂漆。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

992807100D

您正在查看的产品与这些编号存在交叉引用关系

Front Lower Spoiler /Splitter 996 GT2
also fits GT2 look front bumper parts No.996 505 311 31GRP or original Porsche GT2 front bumper



Fits:
Porsche 996 GT2

Made out of Fibreglass / Kevlar 

Click picture for large parts diagram.
Diagram Ref: 7

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

9965055553101C

您正在查看的产品与这些编号存在交叉引用关系

Grille insert for 996 Duct tail



Fits:
Porsche 996 1998-05 fitted with P996 Ducktail

The vanes were angled to be as non-restrictive as possible to the air path into the engine bay. This means that the engine and air inlet are essentially open when viewed from the front but closed when viewed from the rear, which is good to keep falling leaves out.

The material we chose for the grille was ASA (Acrylonitrile-styrene-acrylate) which prints neatly and can withstand prolonged temperatures of up to 100C. This is more than any engine grille should ever see unless the engine is on fire. In terms of toughness it's on par with ABS but has the added benefit of being UV resistant.

Rear valance for custom exhaust solutions.
Covers both bumper corners and closes the factory outlet.



Fits all 911 SC / Carrera models.

Smooth look interior package (no rear seats).



This is a fibre glass & carbon material interior package, it has 12pcs in the package to give the interior a smooth painted look, this should only be fitted by an expert body shop as some adjustments are required while fitting.

Fits:
for RHD cars (right hand drive)
Porsche 964 1989-94

Smooth look interior package (no rear seats) Porsche 964 LHD

This is a fibre glass & carbon material interior package, it has 12pcs in the package to give the interior a smooth painted look, this should only be fitted by an expert body shop as some adjustments are required while fitting 

Fits LHD cars  (left hand dive)

Porsche 964

Smooth look interior package (no rear seats) 911 1974-89
This is a fibre glass & carbon material interior package, it has 12pcs in the package to give the interior a smooth painted look, this should only be fitted by an expert body shop as some adjustments are required while fitting



Fits:
LHD (left hand dive) or RHD (right hand drive) cars 
Porsche 911 G 1974-89

Front wings with wide body look / RSR Porsche 911 1969-73 can also be used for widebody back dates .

Pair of fibre glass wings with metal head lamp buckets, you will need long wheelbase horn grills and indicator lens. fuel bowl and fuel flap  



Fits:
Porsche 911 1969-73 (Long Wheel Base Cars)

Porsche 911 G models for back dating 

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90150303223W

您正在查看的产品与这些编号存在交叉引用关系

Rear Duck Tail (Ducktail) RS style Porsche 996 (Not Turbo, GT3 or GT2)

O/E fitment Porsche 996 Ducktail Spoiler. Ducktail can be fitted in 10 minutes and subtly transforms the look of you 996.  These come in raw finish and will require priming and painting. Any marks, blemishes or imperfections should be dealt with prior to applying primer and topcoat.

These spoilers weigh approximately 1.8kg more than the original flat deck lid without the Ducktail.

Disclaimer: By completing the purchase of this part, you accept all responsibility for any damage caused during the fitting or finishing process.  

Fits:
Porsche 996 1998-05
Not Turbo, GT3 or GT2

Please note: As most after market panels, this spoiler requires extra work prior to painting in order to ensure satisfying final effect. Gaps between body will need to be filled and dry fitting before painting is recommended.

Rear Bumper Lining. Porsche 965 Turbo / 964 widebody



Fits:
Porsche 965 Turbo 1989-94
Porsche 964 widebody 1989-94

Material:
Fibre Glass

Front bumper lining. 



Fits:
Porsche 965 Turbo 1989-94

Material:
Fibre Glass

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

96550511301GRP

您正在查看的产品与这些编号存在交叉引用关系

Rear bumper singer look, Wide body.



Fits:
Porsche 964 Turbo

Width of stock 964 Turbo. Bumper measures 172cm (approx) between corner to corner (furthest points away).

Singer-Inspired Design:

Exquisite replication of Singer Porsche aesthetics.

Transforms the appearance of your Porsche 964 Turbo.

Meticulously detailed for an authentic Singer look.

High-Quality Materials:

Crafted from durable and lightweight materials.

Ensures longevity and minimizes added weight.

Resistant to corrosion and environmental factors.

Enhanced Aerodynamics:

Engineered for improved airflow and downforce.

Elevates stability and performance, particularly at higher speeds.

Reduces drag, enhancing overall handling.

Seamless Installation:

Designed for straightforward bolt-on installation.

Compatible with existing Porsche 964 Turbo mounting points.

Requires minimal modifications for a perfect fit.

Upgrading your Porsche 964 Turbo with a Singer-inspired rear bumper offers a fusion of style and performance enhancements. This meticulously crafted bumper faithfully replicates the iconic Singer Porsche design, elevating the visual appeal of your 964 Turbo to Singer levels of sophistication.

Manufactured from high-quality materials, this rear bumper not only exudes elegance but also ensures robustness and durability. It is corrosion-resistant and can withstand various environmental factors, making it a practical and long-lasting choice for Porsche enthusiasts.

Beyond its striking appearance, this rear bumper is engineered for improved aerodynamics. Its design enhances airflow and downforce, resulting in heightened stability and performance, especially at higher speeds. This can significantly elevate your driving experience and confidence on the road or track.

Installation is seamless, thanks to the bolt-on design and compatibility with existing Porsche 964 Turbo mounting points. Minimal modifications are required for a precise fit, making it a convenient choice for those seeking to enhance their Porsche's appearance and performance.

At Design911, we are committed to assisting you in finding the ideal parts for your Porsche. Our extensive range of Porsche 964 Turbo rear bumpers, including Singer-inspired designs, ensures you have a variety of options to choose from. Our knowledgeable team is ready to provide professional advice and guidance, helping you select the perfect rear bumper to transform your Porsche 964 Turbo into a Singer-inspired masterpiece. We are dedicated to enhancing your Porsche experience by seamlessly blending style and performance.

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Rear bumper singer look, Standard body.



Fits:
Porsche 964 Carrera 2 / Carrera 4

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Singer look front bumper.



Fits:
Porsche 964 Turbo

Singer-Inspired Design:

Crafted to replicate the iconic Singer Porsche style.

Enhances the aesthetics of your Porsche 964 Turbo.

Precision detailing for an authentic appearance.

High-Quality Materials:

Manufactured from durable and lightweight materials.

Ensures longevity and reduces added weight.

Resistant to corrosion and environmental factors.

Improved Aerodynamics:

Designed for enhanced airflow and downforce.

Enhances stability and performance at higher speeds.

Reduces drag and improves overall handling.

Easy Installation:

Bolt-on design for straightforward installation.

Compatible with existing Porsche 964 Turbo mounting points.

Minimal modifications required for fitment.

Upgrading your Porsche 964 Turbo with a Singer-inspired front bumper offers both aesthetic and performance benefits. This meticulously designed bumper replicates the iconic Singer Porsche look, elevating the visual appeal of your 964 Turbo to a whole new level. Crafted with precision, it captures the essence of Singer's renowned attention to detail.

Constructed from high-quality materials, this front bumper not only looks stunning but also ensures durability and longevity. It's resistant to corrosion and environmental factors, making it a practical choice for Porsche enthusiasts.

Beyond aesthetics, this front bumper is engineered for improved aerodynamics. Its design enhances airflow and downforce, resulting in enhanced stability and performance, especially at higher speeds. This can significantly improve your driving experience and confidence on the road or track.

Installation is hassle-free, thanks to the bolt-on design and compatibility with existing Porsche 964 Turbo mounting points. Minimal modifications are required for fitment, making it a practical choice for those looking to enhance their Porsche's appearance and performance.

At Design911, we are dedicated to helping you find the perfect parts for your Porsche. Our extensive range of Porsche 964 Turbo front bumpers, including Singer-inspired designs, ensures you have options to choose from. Our knowledgeable team is ready to provide professional advice and assistance, guiding you to select the ideal front bumper to transform your Porsche 964 Turbo into a Singer-inspired masterpiece. We are committed to enhancing your Porsche experience, combining style and performance seamlessly.

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Roof panel light weight in Carbon Fibre for Porsche 987 Cayman. for cars without sunroof, or to delete the sunroof



Fits:
Porsche 987C Cayman 2005-2008

Lightweight roof panel in Carbon Fibre.
for cars with out sunroof, or to delete the sunroof



Fits:
Porsche 996
Porsche 997

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

P996997CFR

您正在查看的产品与这些编号存在交叉引用关系

Front Bumper. Turbo / S2 Look

Fits:
Porsche 944

Material:
Fiberglas GRP

Please note this bumper will require preparation and minor adjustments in order to make it fit your car. Professional bodyshop is recommended.

Product Type:
Replica for conversions

Click picture for large parts diagram.
Diagram ref no 1.

Rear Ducktail / New Singer DLS style (grill included).



Fits:
Porsche 911 1974-89

These spoilers are made out of fibreglass and come in a semi-prepared condition, so will need Bodyshop final trial fit and preparation before painting.
The engine cover part is made out of polyester.
The grill is also polyester, but already in a black gel coating.

Rear Ducktail / New Singer DLS style (grill included).



Fits:
Porsche 964

If mounted on a 964, no other modification required, the engine cover part is made out of polyester.
The grill is also polyester, but already in a black gel coating.

This item is a one piece ducktail, the grill is attached to the ducktail and cannot be removed.

Rear Duck Tail (Ducktail) Spoiler.
Material: Fibre Glass



Note: Requires 3rd brake light 99763105201 - bought separately

Fits:
Porsche 996 Turbo

Please note: As most fibre glass panels, this spoiler requires extra work prior to painting in order to ensure satisfying final effect. Gaps between body will need to be filled and dry fitting before painting is recommended.

Rear Duck Tail (Ducktail) Spoiler. This spoiler will accommodate to re-fit the original C4S Centre reflector.

Material: Fibre Glass



Fits:
Porsche 996 C4S 2001-05 Coupe only
(will not fit 996 Turbo or Standard 996)

Note: Requires 3rd brake light 99763105201 - bought separately

Please note: As most fibre glass panels, this spoiler requires extra work prior to painting in order to ensure satisfying final effect. Gaps between body will need to be filled and dry fitting before painting is recommended.

Rear Duck Tail (Ducktail) Spoiler.
WITHOUT hole for 3rd brake light
Material: Fibre Glass



Fits:
Porsche 996 1998-05
(will not fit 996 Turbo or 996 C4S)

Please note: As most fibre glass panels, this spoiler requires extra work prior to painting in order to ensure satisfying final effect. Gaps between body will need to be filled and dry fitting before painting is recommended.

Classic Look Duck Tail Rear Spoiler.
Get that retro classic look like the 1973 RS for your 997 (911) Model with our classic parts.



Fits:
Porsche 997 Gen2 Models

More information:
To stop the standard spoiler mechanism light on the dash working you can take the vehicle to your local Porsche centre to have the pop up spoiler function de-coded.

The brake light is NOT included with the duct tail to make it work you can harness part number 99761267071 or modify the existing harness if you already have a 3rd brake light in your spoiler or order part number 99763105201

You do not need to change the bumpers and lights if you just want the duct tail spoiler by it self

This spoiler should be fitted like any other fibre glass material product professional prepared, pre-fitted before painting and then let it dry naturally. Not recommend to bake fibre glass products

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

P9972DCTL

您正在查看的产品与这些编号存在交叉引用关系

Rear Duck Tail (Ducktail) Spoiler with 3rd brake light hole
Material: Fibre Glass



Note: Requires 3rd brake light 99763105201 - bought separately

Fits:
Porsche 996 1998-05
(will not fit 996 Turbo or 996 C4S)

Please note: As most fibre glass panels, this spoiler requires extra work prior to painting in order to ensure satisfying final effect. Gaps between body will need to be filled and dry fitting before painting is recommended.

Rear duck tail (Ducktail) RS spoiler.

Material: Fibre Glass (requires reworking)

Fits:
Porsche 993 1994-98

You will require early 911 grille and fitting kit to fit this spoiler.

Please note: As most fibre glass panels, this spoiler requires extra work prior to painting in order to ensure satisfying final effect. Gaps between body will need to be filled and dry fitting before painting is recommended.

Rear Duck Tail (Ducktail) Spoiler.
Material: Fibre Glass



Fits:
Porsche 964 1989-94 (none turbo cars)

You will require early 911 grille and fitting kit to fit this spoiler.
Please CLICK HERE to view the grille.
Please CLICK HERE to view the fitting kit.

911 Ducktail Rear Spoiler / Bürzel



Fits:
Porsche 911 1965-89

You will require early 911 grille and fitting kit to fit this spoiler.

Please CLICK HERE to view the grille.

Please CLICK HERE to view the fitting kit.

Average weight: 5 kilograms

Please note:
Requires the grill - not included in price

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

P911DCTL

您正在查看的产品与这些编号存在交叉引用关系

Aero look front lower spoilers. 2 Parts Left and Right.
This product replaces the two front undertrays they are quite easy to replace as they just click onto the front carrera bumber.

Material: Fibre glass



Fits:
Porsche 993 C2/C4/RS 1994-97
Will not fit 993 Turbo bumpers

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99350552110GRP

您正在查看的产品与这些编号存在交叉引用关系

Classic Look Rear Bumper for Porsche 997 Models

Get that retro classic look like the 1973 RS for your 997 (911) Model with our classic parts.

For 997 C2 and C2s the rear bumper will need modification to fit.

Part included:
1 x Rear Bumper

Fits:
Porsche 997 MKI *
Porsche 997 MKII

*For 997 generation 1 (MK1) model cars you will need 997 Gen2 Rear lamps

You will also need our classic look tial pipes 99750555506.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99750555502GRP

您正在查看的产品与这些编号存在交叉引用关系

Classic Look Duck Tail Rear Spoiler.
Get that retro classic look like the 1973 RS for your 997 (911) Model with our classic parts.



Fits:
Porsche 997 MKI Gen1 Models Including Convertible Models

More information:
To stop the standard spoiler mechanism light on the dash working you can take the vehicle to your local Porsche centre to have the pop up spoiler function de-coded.

The brake light is NOT included with the duct tail to make it work you can harness part number 99762267070 or modify the existing harness if you already have a 3rd brake light in your spoiler or order part number 99763105201. The rubber buffers need to be changed to 99651298700 x2.

You do not need to change the bumpers and lights if you just want the duct tail spoiler by it self

This spoiler should be fitted like any other fibre glass material product professional prepared, pre-fitted before painting and then let it dry naturally. Not recommend to bake fibre glass products

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

P9971DCTL

您正在查看的产品与这些编号存在交叉引用关系

The 997 GT3 look front bumper can be fitted to Porsche Boxster 986 or Porsche Carrera 996 with standard non facelift model headlamps.

Fits:
Porsche Boxster 986
Porsche 996 1997-08/2001

Material:
Made from Fiber Glass. GRP

This is a fibre glass after market products and will require preparation before fitting.

The 997 turbo look front bumper can be fitted to Porsche Boxster 986 or Porsche Carrera 996 with standard non facelift model headlamps.

This front bumper is made to be fitted with Original Porsche 997 Turbo indicators and minor wiring mordifications may be required.

Fits:
Porsche Boxster 986 1997 -04
Porsche 996 1997-08/2001

Material:
Made from Fiber Glass. GRP

This is a fibre glass after market products and will require preparation before fitting.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99750519198GRP

您正在查看的产品与这些编号存在交叉引用关系

GT3 MKII 外观前保险杠。采用高级玻璃纤维制成，外观完美，适合改款 997 车型。



适合：
保时捷 997 MKII 2010>>

材料：
玻璃纤维

产品类别：
复制品

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

997505191XXGRP

您正在查看的产品与这些编号存在交叉引用关系

轻质复合屋顶皮。
材质：碳纤维



适合：
保时捷 911 1967-89 轿跑车
保时捷 964 Coupe
保时捷 993 Coupe

通过拆除 911 车顶的钢板（包括天窗）来减轻重量，并大幅降低汽车重心。这是一种从赛道/赛车上拆除天窗并安装焊接防滚架的解决方案，无需重新喷漆或焊接。碳纤维表皮的重量不到原钢板的一半，如果拆除天窗，可以轻松减轻 20 公斤的重量。

黑色碳纤维表面涂有高光透明涂层，可展示 2x2 斜纹碳纤维编织（3k，航空级 GRP/玻璃纤维增强表皮）。真空包装并注入树脂，以确保无气泡和尽可能轻的部件，如果需要，可以进行上漆。

由于是定制产品，因此需要 2-3 周的时间来制作和发货。

Rear Bumper - LEFT SECTION.
Specially produced for use with 964 twin outlet exhaust system.



Fits:
Porsche 964 1989-94 (not Turbo)

Material:
Made from Fibre Glass GRP

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

96450516399

您正在查看的产品与这些编号存在交叉引用关系

适合所有型号 997 / Boxster 987（包括 Cayman 和 Cayman S）。
光滑的发动机盖需要像 RS 车型一样贴上发动机盖徽章“贴纸”

#光纤技术#

- 碳纤维外层与玻璃纤维内框 - 重量约 6 公斤

适合：
保时捷 997 2005>>
保时捷 997 涡轮增压
保时捷 987 Boxster 2005>>
保时捷 987C 开曼

材料：
碳/碳与玻璃纤维

964 Turbo (965) widebody cars. Replaces front undertrays.



Fits:
Porsche 964 (965) Turbo

Material:
Made from Fibre Glass. GRP

Product Type:
Replica