GKN

Driveshaft rear. Porsche 992 GT3 



Fits:
Porsche 992 GT3 




相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

9GT501201A

您正在查看的产品与这些编号存在交叉引用关系

The CV joint (Constant Velocity Joint) rubber boot is located at each end of the axle assembly and protects the CV Joint. if the boot is split this can cause further damage.



Fits:
Porsche 986 BOXSTER 2.7L 2003-04 INNER AND OUTER
Porsche 987 BOXSTER 987C CAYMAN INNER AND OUTER
Porsche 996 2002>> C2/C4 REAR INNER AND OUTER
Porsche 997 C2/C4 REAR INNER AND OUTER

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99633229300

您正在查看的产品与这些编号存在交叉引用关系

The CV joint (Constant Velocity Joint) rubber boot is located at each end of the axle assembly and protects the CV Joint. if the boot is split this can cause further damage.



Fits:
Porsche 955 Cayenne 3.2L 2004-06 (OUTER & INNER) Rear Axle
Porsche 957 Cayenne 3.6L 2007-10 (OUTER & INNER) Rear Axle
Porsche 957 Cayenne 3.0L DIESEL 2007-10 (OUTER & INNER) Rear Axle
Porsche 957 Cayenne S 4.8L V8 2007-10 Tiptronic (OUTER & INNER) Rear Axle

Click 'Zoom in' for large parts diagram.
Diagram ref no 9

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

95533290100

您正在查看的产品与这些编号存在交叉引用关系

万向轴前段传动。



适合：
仅适合配备汽油发动机的汽车
保时捷 955 卡宴 MKI 2003-06
保时捷 957 卡宴 MKII 2007>>

以前的零件号：
- 95542102000
- 95542102001
- 95542102002
- 95542102003

单击“放大”查看大零件图。
零件图参考编号 1。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

95542102004

您正在查看的产品与这些编号存在交叉引用关系

Fits:
Porsche Cayenne 955 V6 3.2L MK I 2003-2006
Porsche Cayenne 955 V8 S 4.5L MK I 2003-2006
Porsche Cayenne 955 V8 4.5L Turbo MK I 2003-2006

Porsche Cayenne 957 6cyl 3.0L MK II 2007-2008
Porsche Cayenne 957 V8 3.6L MK II 2007-2008
Porsche Cayenne 957 V8 4.8L MK II 2007-2008
Porsche Cayenne 957 V8 4.8L GTS MK II 2007-2008
Porsche Cayenne 957 V8 4.8L Turbo MK II 2007-2008

Previous part numbers:
- 95542102010
- 95542102011
- 95542102012
- 95542102013
- 95542102014

Click 'Zoom in' for large parts diagram.
Diagram parts Ref No 4.

PLEASE NOTE:

• The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
• Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
• Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
• All surcharges and exchanges are subject to our terms and conditions.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

95542102015

您正在查看的产品与这些编号存在交叉引用关系

Constant Velocity joint outer. Front axle.



Fits:
Porsche 95B Macan 2.0L / 3.0L 2014-18
Porsche Macan II 2.0L / 3.0L 2019>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 10-14.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

8K0407305M

您正在查看的产品与这些编号存在交叉引用关系

Fits:
Porsche 911 1969-73 Manual cars

PLEASE NOTE: The old unit must be returned to Design911 in a built state, not in component pieces.


*Reconditioned Drive Shafts are sold on a exchange basis, A surcharge of £75.00 will be held and then refunded when the old one is returned

Price is for each Driveshaft.

PLEASE NOTE:

• The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
• Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
• Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
• All surcharges and exchanges are subject to our terms and conditions.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91133203309

您正在查看的产品与这些编号存在交叉引用关系

Joint specific FlexBoots: universally usable and yet most similar to OE boots.

They are produced in high elasticity neoprene of high quality and high resistance to ozone, stress and low temperatures.

The boots can be mounted through the use of a plastic one or of the modern clickgun.

All kits include: 1 boot, 2 universal clamps with holes and 80gr grease.

All GKN FLexBoots are flexible and can therefore
be mounted with a cone or a boot slider. The constant velocity joint does not have to be disassembled!

Fits:

Part No: 190965: ø 1 - 27 mm / ø 2 - 84 mm / L - 100 mm
PORSCHE Cayenne 08/02-12/06

Part No: 190967: ø 1 - 29 mm / ø 2 - 67 mm / L - 79 mm
PORSCHE Cayenne 08/02-12/06

Part No. 190969: ø 1 - 23 mm / ø 2 - 59 mm / L - 90 mm
PORSCHE Cayenne 08/02-12/06

Part No. 190971: ø 1 - 24 mm / ø 2 - 92 mm / L - 83 mm
PORSCHE Cayenne 08/02-12/10

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

1909

您正在查看的产品与这些编号存在交叉引用关系

CV 接头防尘罩 KIT (等速接头防尘罩)。



适合：

保时捷 964 C2 / C4 - 后内外侧
保时捷 964 C4 - 前内
保时捷 993 C2 / C4 - 后内外侧
保时捷 993 C4 - 前内
保时捷 996 C2 / C4 / Turbo / GT2 / GT3 - 后内和后外
保时捷 997 Turbo / GT2 / GT3 - 后内和外
保时捷 986 2.5/2.7L/3.2L >>2002 - 内部和外部
保时捷 986 3.2L 2003>> - TIPRONIC 内胎和外胎
保时捷 986 3.2L 2003>> - 手动 外饰

CV 接头（等速万向节）橡胶套位于车轴组件的每一端，用于保护 CV 接头。如果橡胶套破裂，则可能会造成进一步的损坏。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

92833229302

您正在查看的产品与这些编号存在交叉引用关系

Fits:
Porsche 944 S2 1989-91 Manual cars
Porsche 944 Turbo 1985-91 Manual cars

PLEASE NOTE: The old unit must be returned to Design911 in a built state, not in component pieces.

*Reconditioned Drive Shafts are sold on a exchange basis, A surcharge of £40.00 will be held and then refunded when the old one is returned


Price is for each Driveshaft.

PLEASE NOTE:

• The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
• Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
• Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
• All surcharges and exchanges are subject to our terms and conditions.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

95133203806

您正在查看的产品与这些编号存在交叉引用关系

CV joint kit (Constant Velocity Joint).



Fits:
Porsche 944 M030/031
Porsche 944 TURBO 87-91
Porsche 944S2 89-91
Porsche 968

The CV joint (Constant Velocity Joint) is located at each end of the axle assembly and is most often used on front wheel drive cars. A 2wd vehicle will have 2 axles with 4 CV joints and boots. A 4wd will typically have twice as many as the 2wd. The CV joint allows the wheels of the vehicle to turn while still being able to put power to the wheels.

The most notable indicator of a worn out CV joint is the loud clicking noise you hear when you turn the steering wheel.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

95133290100

您正在查看的产品与这些编号存在交叉引用关系

CV joint kit Constant Velocity Joint.



Fits:
Porsche 911 TURBO (930) 3.0L 1975-77
Porsche 911 TURBO (930) 3.3L 1978-89

Specification:
Disc Joint,
Tooth Gaps, profile shaft conn.: 28,
without groove in internal component,
Joint Ø: 108 mm,
Length: 40 mm,
Bore Ø: 10.2 mm,
Number of bores: 6,
Bolt Hole Circle Ø: 94 mm,
with rubber bellow,


The CV joint (Constant Velocity Joint) is located at each end of the axle assembly and is most often used on front wheel drive cars. A 2wd vehicle will have 2 axles with 4 CV joints and boots. A 4wd will typically have twice as many as the 2wd. The CV joint allows the wheels of the vehicle to turn while still being able to put power to the wheels.

The most notable indicator of a worn out CV joint is the loud clicking noise you hear when you turn the steering wheel.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

93033203400

您正在查看的产品与这些编号存在交叉引用关系

CV joint kit (Constant Velocity Joint).



Fits:
Porsche 924/924S 76-88
Porsche 944/944S 82-91 (NOT TURBO)
Porsche 944T 1986 ONLY

The CV joint (Constant Velocity Joint) is located at each end of the axle assembly and is most often used on front wheel drive cars. A 2wd vehicle will have 2 axles with 4 CV joints and boots. A 4wd will typically have twice as many as the 2wd. The CV joint allows the wheels of the vehicle to turn while still being able to put power to the wheels.

The most notable indicator of a worn out CV joint is the loud clicking noise you hear when you turn the steering wheel.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

94433190100

您正在查看的产品与这些编号存在交叉引用关系

CV joint kit Constant Velocity Joint.



Fits:
Porsche 911 3.2L 84-89
Porsche 965 (964 TURBO)
Porsche 964 C2 INNER MAN / TIP
Porsche 993 C2 INNER MAN / TIP
Porsche 986 S 3.2L INNER ONLY
Porsche 996 3.4L INNER REAR LEFT OR RIGHT
Porsche 996 3.6L INNER REAR LEFT OR RIGHT

The CV joint (Constant Velocity Joint) is located at each end of the axle assembly and is most often used on front wheel drive cars. A 2wd vehicle will have 2 axles with 4 CV joints and boots. A 4wd will typically have twice as many as the 2wd. The CV joint allows the wheels of the vehicle to turn while still being able to put power to the wheels.

The most notable indicator of a worn out CV joint is the loud clicking noise you hear when you turn the steering wheel.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91133292301

您正在查看的产品与这些编号存在交叉引用关系

CV Joint boot KIT (Constant Velocity Joint boot).



Fits:
Porsche 944 TURBO 1987-91
Porsche 968 1986-96

The CV joint (Constant Velocity Joint) rubber boot is located at each end of the axle assembly and protects the CV Joint. if the boot is split this can cause further damage.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

95133290300

您正在查看的产品与这些编号存在交叉引用关系

CV Joint boot KIT Constant Velocity Joint boot.



Fits:
Porsche 928 1978-81 INNER / OUTER
Porsche 930 1975-84

The CV joint (Constant Velocity Joint) rubber boot is located at each end of the axle assembly and protects the CV Joint. if the boot is split this can cause further damage.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

92833292201

您正在查看的产品与这些编号存在交叉引用关系

CV Joint boot KIT Constant Velocity Joint boot.



Fits:
Porsche 928 1982-84 INNER / OUTER

The CV joint (Constant Velocity Joint) rubber boot is located at each end of the axle assembly and protects the CV Joint. if the boot is split this can cause further damage.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

92833292401

您正在查看的产品与这些编号存在交叉引用关系

CV Joint boot kit (Constant Velocity Joint boot).



Fits:
Porsche 924 / 924S 1976-88
Porsche 944 82-91 (NOT TURBO)

The CV joint (Constant Velocity Joint) rubber boot is located at each end of the axle assembly and protects the CV Joint. if the boot is split this can cause further damage.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

94433190300

您正在查看的产品与这些编号存在交叉引用关系

The CV joint (Constant Velocity Joint) rubber boot is located at each end of the axle assembly and protects the CV Joint. if the boot is split this can cause further damage.



Fits:
Porsche 911 1984-89* 3.2L/3.3L (915 & G50 Gearbox) INNER
Porsche 964 C2 INNER
Porsche 993 FRONT INNER & REAR INNER
Porsche 928 85-96 INNER
Porsche 986 BOXSTER 3.2L 1999-2002 INNER / OUTER
Porsche 996 3.4L INNER REAR LEFT OR RIGHT

For 911 this will fit cars with transmissions:
915.72 - 08/1984 - 07/1986
915.73 - 08/1984 - 07/1986
G50.00 - 08/1986 - 07/1988
G50.01 - 08/1986 - 07/1989
G50.02 - 08/1986 - 07/1989
930.36 - 08/1984 - 07/1988
930.37 - 08/1985 - 07/1985

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

00004330644

您正在查看的产品与这些编号存在交叉引用关系

CV Joint boot KIT (Constant Velocity Joint boot).



Fits:
Porsche 911 1976-86 (NOT TURBO)

Models 911 3.2L with transmissions:
915.67 - 08/1983 - 07/1984
915.68 - 08/1983 - 07/1985

The CV joint (Constant Velocity Joint) rubber boot is located at each end of the axle assembly and protects the CV Joint. if the boot is split this can cause further damage.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

92333203700

您正在查看的产品与这些编号存在交叉引用关系

Reconditioned replacement driveshaft
Shaft Length 531.5mm



Fits:
Porsche 924S 1986-88 Manual cars
Porsche 944 2.5L, 2.7L 1985>> (not Turbo) Manual cars

PLEASE NOTE: The old unit must be returned to Design911 in a built state, not in component pieces.

*Reconditioned Drive Shafts are sold on a exchange basis, A surcharge of £40.00 will be held and then refunded when the old one is returned

This driveshaft comes with joints and rubber boots.
Comes with 12 months warranty

Price is for each Driveshaft.

PLEASE NOTE:

• The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
• Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
• Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
• All surcharges and exchanges are subject to our terms and conditions.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

94433203801

您正在查看的产品与这些编号存在交叉引用关系

Reconditioned replacement driveshaft.
Please note:
Reconditioned units are sold on an exchange basis, A surcharge of £75.00 will be held and then refunded when the old one is returned.



Length [mm] 406 mm
Wheel-side joint diameter [mm] 94.7 mm
Transmission-side joint diameter [mm] 94.7 mm
Bore Ø [mm] 8.2 mm
Number of Bores 6
Bolt Hole Circle Ø [mm] 78 mm
Service exchange part

Fits:
Porsche 911 >>1968 Manual cars
Short wheel base cars.

PLEASE NOTE: The old unit must be returned to Design911 in a built state, not in component pieces.

*Reconditioned Driveshafts are sold on a exchange basis, A surchange of £75.00 will be held and then refunded when the old one is returned

Price is for each Driveshaft.

PLEASE NOTE:

• The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
• Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
• Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
• All surcharges and exchanges are subject to our terms and conditions.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90133202611

您正在查看的产品与这些编号存在交叉引用关系

Reconditioned replacement driveshaft
Please note:
Reconditioned Alternators are sold on an exchange basis, A surcharge of £75.00 will be held and then refunded when the old one is returned.



Fits:
Porsche 911 1985-89 Turbo
Porsche 911 1985-89 WideBody
Porsche 911 1985-89 WideBody M491 Spec
Manual cars

PLEASE NOTE: The old unit must be returned to Design911 in a built state, not in component pieces.

Price is for each Driveshaft.

PLEASE NOTE:

• The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
• Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
• Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
• All surcharges and exchanges are subject to our terms and conditions.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

93033203708

您正在查看的产品与这些编号存在交叉引用关系

Reconditioned replacement driveshaft

Overall length: 603mm Flange diameter: 111mm

Fits:
Porsche 911 1985-86 (915 G15.72/73 Gearbox) Manual cars
Porsche 911 1987-89 (G50 Gearbox) Manual cars

PLEASE NOTE: The old unit must be returned to Design911 in a built state, not in component pieces.

*Reconditioned Drive Shafts are sold on a exchange basis, A surcharge will be held and then refunded when the old one is returned

Price is for each Drive Shaft.

PLEASE NOTE:

• The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
• Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
• Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
• All surcharges and exchanges are subject to our terms and conditions.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91133202415

您正在查看的产品与这些编号存在交叉引用关系

Reconditioned Replacement Driveshaft
Please note:
Reconditioned units are sold on an exchange basis, A surcharge of £75.00 will be held and then refunded when the old one is returned.



Fits:
Porsche 964 1989-94 C2 Manual cars

PLEASE NOTE: The old unit must be returned to Design911 in a built state, not in component pieces.

*Reconditioned Driveshafts are sold on a exchange basis, A surcharge of £75.00 will be held and then refunded when the old one is returned

Price is for each Driveshaft

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

96433202417

您正在查看的产品与这些编号存在交叉引用关系

Reconditioned replacement driveshaft
Please note:
Reconditioned units are sold on an exchange basis, A surcharge of £75.00 will be held and then refunded when the old one is returned.



Fits:
Porsche 911 1975-83 (915 Gearbox) Manual cars
Porsche 911 1984 3.2L (915 Gearbox) Manual cars

PLEASE NOTE: The old unit must be returned to Design911 in a built state, not in component pieces.

Price is for each Driveshaft.

PLEASE NOTE:

• The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
• Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
• Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
• All surcharges and exchanges are subject to our terms and conditions.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

92333203302

您正在查看的产品与这些编号存在交叉引用关系

CV Joint boot KIT (Constant Velocity Joint boot).



Fits:
Porsche 911 1969-75
Porsche 911 TURBO 1975-77
Porsche 911 TURBO 1978-86
for 4 bolt driveshaft type

The CV joint (Constant Velocity Joint) rubber boot is located at each end of the axle assembly and protects the CV Joint. if the boot is split this can cause further damage.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90133229312

您正在查看的产品与这些编号存在交叉引用关系

The CV joint (Constant Velocity Joint) rubber boot is located at each end of the axle assembly and protects the CV Joint. if the boot is split this can cause further damage.



Fits:
Porsche 911 1965-68
Porsche 914 1970-76
(for 6 Bolt drive shaft type)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90133229311

您正在查看的产品与这些编号存在交叉引用关系

The CV joint (Constant Velocity Joint).



Fits:
Porsche 911 2.7/3.0L 1974-84
6 Bolt driveshaft type

Tooth Gaps, profile shaft conn.: 25,
without groove in internal component,
D1: 25.84 mm,
Joint Ø: 100 mm,
Length: 32 mm, with cap,
Bore Ø: 8.2 mm,
Number of bores: 6,
Bolt Hole Circle Ø: 86 mm,

The CV joint (Constant Velocity Joint) is located at each end of the axle assembly and is most often used on front wheel drive cars. A 2wd vehicle will have 2 axles with 4 CV joints and boots. A 4wd will typically have twice as many as the 2wd. The CV joint allows the wheels of the vehicle to turn while still being able to put power to the wheels.

The most notable indicator of a worn out CV joint is the loud clicking noise you hear when you turn the steering wheel.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

92333203200

您正在查看的产品与这些编号存在交叉引用关系