可调悬架套件。保时捷 996 GT3 Ohlins DFV 技术
#奥林斯#
采用 DFV 技术的 Road & Track 套件是目前采用保时捷特定设置开发的套件。DFV 技术的作用类似于高低速泄压阀,并且具有可调节压缩和回弹功能,妥协的日子已经一去不复返。
无论是赛道日还是赛车日,这款套件在公路和高速赛道上的表现都出奇地好。这些设置都是通过摇晃装置和赛车手的测试开发的,以确保 Öhlins DNA 的存在。
这些套件采用轻质设计,大部分部件为铝制,经过腐蚀测试,并提供两年有限保修。它们还获得了 TÜV 认证。
该套件专为高端赛车开发,并已获得TÜV认证。
技术信息:
• DFV(双流阀)
• 可重建
• 经过腐蚀盐雾测试(ISO 9227)
• 2 年有限保修
• 高度可调
• 比标准低 20 毫米
前部减震器:
• 麦弗逊支柱
• 单排气调节器
• 弹簧预载调节器
• 螺旋弹簧
• 防尘罩
• 与原装顶部支架一起使用
后减震器:
• 传统减震器
• 单排气调节器
• 弹簧预载调节器
• 螺旋弹簧
• 防尘罩
• 与原装顶部支架一起使用
适合:
保时捷 996 GT3
保时捷 996 GT3S
保时捷 996 GT2
点击此处查看安装说明
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
The Road & Track kit with DFV technology is a kit now developed with Porsche specific settings. The DFV technology acts like a high and low speed blow off valve and with adjustable compression and rebound the days of compromise are over.
This kit works surprisingly well on the road as well as at high speed on racing tracks, whether it is trackdays or racing. The settings have been developed using both shake rigs and testing by racing drivers to make sure the Öhlins DNA is present.
These kits are in a light weight design with most of the parts in aluminium and have been corrosion tested and comes with a two year limited warranty. They are also TÜV approved.
This kit is especially developed for high end racing and also TÜV approved.
Technical Info:
DFV (Dual Flow Valve)
Rebuildable
Corrosion salt spray tested (ISO 9227)
2 year Limited Warranty
Height adjustable
20 mm lower than standard
Front Shocks:
McPherson Strut
Single bleed adjuster
Spring preload adjuster
Coil Springs
Dustcovers
Use with original top mounts
Rear Shocks:
Conventional Shock Absorber
Single bleed adjuster
Spring preload adjuster
Coil Springs
Dustcovers
Use with original top mounts
Fits:
Porsche 996 C4
Porsche 996 Turbo
For Mounting Instructions CLICK HERE
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
kits includes only these items
1 x Adjustable Suspension kits Porsche 996 C4/ 996 Turbo Ohlins DFV Technology
1 x Control Arm Bush Rear Porsche 996 / 986 PowerFlex (PFR57-507)
1 x Powerflex Bushes REAR AXLE for Road Use - Porsche 911 (996) 1997-2005 (PFR57-508)
1 x Powerflex Bushes REAR AXLE for Road Use - Porsche 911 (996) 1997-2005 (PFR57-509)
1 x Powerflex Bushes REAR AXLE for Road Use - Porsche 911 (996) 1997-2005 (PFR57-512)
1 x Powerflex Bushes REAR AXLE for Road Use - Porsche 911 (996) 1997-2005 (PFR57-511)
4 x Lower Arm Bush Repair Kit. Porsche 986 / 996 / 987 / 997 / 987C PowerFlex (PFF57-502/3K)
1 x H&R Anti Roll Bar / Sway Bar Kit. Porsche 996 C4/C4S/996T (F 25mm R 24mm) (33462-1)
1 x Front drop link, Set of 2. Porsche 986 / 987 / 981 / 996 / 997 / 991 (360230996F)
1 x Anti roll bar drop link rear CNC alloy. Porsche 996 C2/996 C4/ 996TT (360230996R)
I bought a Porsche 911 996 3.4-litre Carrera back in September 2016. It was in pretty good condition, but after 18 years' use and 55,000 miles, its suspension was well past its best. Also, out of the factory the car was set up with plenty of understeer built in to make it far more benign than any 911 before it. I wanted to make my car not only feel like new, but better than new.
And so a complete suspension overhaul was needed. I decided to go with Ohlins Road and Track coilovers, Powerflex polyurethane bushes and adjustable anti-roll bars and drop links. Please note that in this video all the parts were supplied by the relevant manufacturers free-of-charge for use in the video. However, I selected them based research as to which set-up would be most suited to my needs for the car. Design 911 also did the work free-of-charge, once again I chose to feature them in the video due to their expertise in Porsche parts supply and fitting.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
SUSPENSIONKIT996C4
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
Purchased Parts Package:
2x Adapter
2x Control wire 280 mm
2x Control knob
2x Screw control knob M4x0,7
Fits:
Porsche 911 (996) Carrera 2 (1998-2006)
Porsche 911 (996) Carrera 4 / Turbo (1999-2005)
Porsche 911 (996) GT2 / GT3 / GT3 RS (1999-2004)
Porsche 911 (997) Carrera 2 (2004-2012)
Porsche 911 (997) Carrera 4/4S, Targa, Cabrio (2006-2012)
Porsche 911 (997) GT2, GT3 (2007-2009)
Porsche 911 (997) GT3 RS (2007-2011)
Porsche 911 (997) Turbo/S, Targa/Cabrio (2006-2012)
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>