保时捷
>
997(911)MK1 2005-2008
>
997 GT3 2007年>>
>
制动器
>
Giro 开槽制动盘
>
Replacement brake disc Slotted REAR 996 / 997.1 / Boxster S / Cayman S/R
Replacement brake disc Slotted REAR 996 / 997.1 / Boxster S / Cayman S/R - D2-031S
代码: D2-031S
Replacement brake disc Slotted REAR
Fits:
Replacement disc only 325mm Upgrade with spacers & hardwarehardware
Porsche 996 C2 / C4
Porsche 997 C2 / C4
Porsche 987 Cayman S
Porsche 987 Cayman R
Porsche 986/987 Boxster S
Fits:
Replacement disc only 325mm Upgrade with spacers & hardwarehardware
Porsche 996 C2 / C4
Porsche 997 C2 / C4
Porsche 987 Cayman S
Porsche 987 Cayman R
Porsche 986/987 Boxster S
产品车辆组
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
Select Below
价格低至: £391.02
相关产品
Titanium Brake Pad Heat Shields Size: E2707 (OE Part No 99635194800)
代码: TS-991-4
Titanium Brake Pad Heat Shields.
This Product Fits:
Porsche 996 GT3 MKII 02-05 Front
Porsche 996 GT2 02-05 Front
Porsche 997 Turbo 06>> Front
Porsche 997 GT3 06>> Front
Porsche 997 GT3 RS 06>> Front
Porsche Carrera GT 03>> Front
Porsche Carrera GT 03>> Rear
The problem of brake fluid boiling is simply traced to heat transferring from the rotors and pads directly into the fluid through the caliper pistons. When brake fluid boils, it releases air that is normally part of the molecular structure of the fluid. This air is compressible of course, and the brake pedal goes to the floor instead of moving the caliper pistons. Production cars tend to suffer from this on track days more as they don't usually have the extensive cooling duct and exotic brake materials as true racing cars. True racing only brake calipers generally come with titanium caliper pistons for one reason. Titanium as a material has low thermal conductivity. This means that it is very bad at transferring heat, which is fantastic if you are trying to keep your fluid cool.
The Girodisc solution to help prevent fluid boiling is to use a thin titanium shim placed between the pad back and the pistons, to keep the braking heat from transferring into the pistons and fluid. Here is a comparison of materials and their relative thermal conductivity ratings:
Titanium 6AL-4V 6.7 W/mk
Steel 52 W/mk
Aluminum 130 W/mk
You can see that Titanium will transfer far less heat than steel and especially aluminum. For cars that are going to see hard or multiple track days, these shims are cheap protection from losing the pedal due to boiling at the wrong time and making the day very expensive.
Water jet cut to exact size, no cutting, grinding, or swearing involved.
Price is per axle (four pieces)
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
TS-991-4
您正在查看的产品与这些编号存在交叉引用关系
This Product Fits:
Porsche 996 GT3 MKII 02-05 Front
Porsche 996 GT2 02-05 Front
Porsche 997 Turbo 06>> Front
Porsche 997 GT3 06>> Front
Porsche 997 GT3 RS 06>> Front
Porsche Carrera GT 03>> Front
Porsche Carrera GT 03>> Rear
The problem of brake fluid boiling is simply traced to heat transferring from the rotors and pads directly into the fluid through the caliper pistons. When brake fluid boils, it releases air that is normally part of the molecular structure of the fluid. This air is compressible of course, and the brake pedal goes to the floor instead of moving the caliper pistons. Production cars tend to suffer from this on track days more as they don't usually have the extensive cooling duct and exotic brake materials as true racing cars. True racing only brake calipers generally come with titanium caliper pistons for one reason. Titanium as a material has low thermal conductivity. This means that it is very bad at transferring heat, which is fantastic if you are trying to keep your fluid cool.
The Girodisc solution to help prevent fluid boiling is to use a thin titanium shim placed between the pad back and the pistons, to keep the braking heat from transferring into the pistons and fluid. Here is a comparison of materials and their relative thermal conductivity ratings:
Titanium 6AL-4V 6.7 W/mk
Steel 52 W/mk
Aluminum 130 W/mk
You can see that Titanium will transfer far less heat than steel and especially aluminum. For cars that are going to see hard or multiple track days, these shims are cheap protection from losing the pedal due to boiling at the wrong time and making the day very expensive.
Water jet cut to exact size, no cutting, grinding, or swearing involved.
Price is per axle (four pieces)
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
TS-991-4
23414
07.B314.17
07B31417
99635194800
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche Carrera GT
£95.00
当前 £93.10
库存
Titanium Brake Pad Heat Shields E8006. Porsche 997 Turbo / GT3 / GT3RS (OE Part No 99735294901)
代码: TS-1300-4
Titanium Brake Pad Heat Shields.
This Product Fits:
Porsche 997 Turbo 06>> Rear
Porsche 997 GT3 06>> Rear
Porsche 997 GT3 RS 06>> Rear
The problem of brake fluid boiling is simply traced to heat transferring from the rotors and pads directly into the fluid through the caliper pistons. When brake fluid boils, it releases air that is normally part of the molecular structure of the fluid. This air is compressible of course, and the brake pedal goes to the floor instead of moving the caliper pistons. Production cars tend to suffer from this on track days more as they don't usually have the extensive cooling duct and exotic brake materials as true racing cars. True racing only brake calipers generally come with titanium caliper pistons for one reason. Titanium as a material has low thermal conductivity. This means that it is very bad at transferring heat, which is fantastic if you are trying to keep your fluid cool.
The Girodisc solution to help prevent fluid boiling is to use a thin titanium shim placed between the pad back and the pistons, to keep the braking heat from transferring into the pistons and fluid. Here is a comparison of materials and their relative thermal conductivity ratings:
Titanium 6AL-4V 6.7 W/mk
Steel 52 W/mk
Aluminum 130 W/mk
You can see that Titanium will transfer far less heat than steel and especially aluminum. For cars that are going to see hard or multiple track days, these shims are cheap protection from losing the pedal due to boiling at the wrong time and making the day very expensive.
Water jet cut to exact size, no cutting, grinding, or swearing involved.
Price is per axle (four pieces)
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
TS-1300-4
24154
07.B315.15
07B31515
99735294901
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
£97.00
当前 £95.06
库存
Brake Disc / Rotor Slotted 2-pc FRONT 997.2 GT3
代码: A1-127S
Brake Disc / Rotor Slotted 2-pc FRONT
Fits:
Porsche 997.1 GT3 with PCCB
Porsche 997.2 GT3 with PCCB
Porsche 997.2 GT2 with PCCB
Porsche 997.2 GT3 without PCCB
Porsche 997.2 GT2 without PCCB
Kit Contains:
Brake Disc 380MM complete with centre bell.
Brake Disc Type: 2-Piece Slotted
The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.
Additional information:
Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.
The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.
More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.
High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. The rotor rings are bright zinc plated to help prevent unsightly corrosion
This product is a special order item, allow 5 - 7 working days for delivery.
Fits:
Porsche 997.1 GT3 with PCCB
Porsche 997.2 GT3 with PCCB
Porsche 997.2 GT2 with PCCB
Porsche 997.2 GT3 without PCCB
Porsche 997.2 GT2 without PCCB
Kit Contains:
Brake Disc 380MM complete with centre bell.
Brake Disc Type: 2-Piece Slotted
The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.
Additional information:
Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.
The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.
More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.
High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. The rotor rings are bright zinc plated to help prevent unsightly corrosion
This product is a special order item, allow 5 - 7 working days for delivery.
产品车辆组
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII GT2 RS 2011>>
Select Below
价格低至: £833.00