Drop Links & Bushes REAR

These 2 coupling rods (L+R) are for the stabilizer linkage on the rear axle
for Porsche 911 G SC Stabilizer rear axle UNIBALL

Replacement for 93033307100, 93033307101, 93033307200, 93033307201



Fits:
Porsche 911 G 1978 - 1989
ONLY for the following engine codes:
911.83 / 930.09 / 930.10 / 930.19 / 930.20 / 930.21 / 930.25 / 930.26 / 930.60 / 930.66

Advantages:
• More direct response of the stabilizer
• Higher overall stiffness of the chassis
• Corrosion protection due to electrogalvanizing
• Lifetime lubrication due to brass plain bearings.
• Adjustable against each other to adjust wheel loads.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

1161

您正在查看的产品与这些编号存在交叉引用关系

Adjustable rear drop link kit.
1 kit required per car



Fits
Porsche 911 - 1978 to 1989
Porsche 911 turbo - 1978 to 1989

Upgrade your factory rear swaybar (anti roll bar) with our adjustable drop links.
These attach to the camber adjustment holes on the spring plates.

Teflon-lined precision rod ends for added durability and increased articulation.

Fully weather-sealed to extend bearing life



相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2271002

您正在查看的产品与这些编号存在交叉引用关系

Drop Link Bush Rear Top.

Price is for each.

Fits:
Porsche 911 1965-69
Porsche 911 1970-73
Porsche 911 1974-77
Porsche 930 1975-77


Click 'Zoom in' for large parts diagram.
Diagram Ref No. 15

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90134378200

您正在查看的产品与这些编号存在交叉引用关系

Drop link bush, rear top.
Price is each.



Fits:
Porsche 911 1965-69
Porsche 911 1970-73
Porsche 911 1974-77
Porsche 930 1975-77
Porsche 914

Click 'Zoom in' for large parts diagram.
Diagram Ref No. 15

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90134378200

您正在查看的产品与这些编号存在交叉引用关系

Drop link rear. Porsche 911 1978-89 / 930 1978-89 (93033307101, 93033307201)



Fits:
Porsche 911 1978-89
Porsche 930 Turbo 3.3L 1978-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 12.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

93033307

您正在查看的产品与这些编号存在交叉引用关系

Drop Link Rear. Porsche 911 1978-89 / 930 1978-89  (93033307100, 93033307200)



Fits:
Porsche 911 1978-89
Porsche 930 Turbo 3.3L 1978-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 12.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

93033307

您正在查看的产品与这些编号存在交叉引用关系

Drop link rear. Porsche 911 1978-89 / 930 1978-89 (93033307101, 93033307201)



Fits:
Porsche 911 1978-89
Porsche 930 Turbo 3.3L 1978-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 12.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

93033307

您正在查看的产品与这些编号存在交叉引用关系

后部下降连杆。

#保时捷#

适合：
保时捷 911 1965-77
保时捷 930 Turbo 3.0L 1975-77

请点击“放大”查看大部件图。
图表参考编号：14

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90133373

您正在查看的产品与这些编号存在交叉引用关系

Drop link, Rear.



Fits:
Porsche 911 1965-77
Porsche 930 Turbo 3.0L 1975-77

Please click 'Zoom in' for large parts diagram.
Diagram ref no: 14

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90133373

您正在查看的产品与这些编号存在交叉引用关系

Front QuickChange™ Blade Style Sway bar

1 kit required per car



Fits
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976

Front and Rear QuickChange™ Blade Style Sway Bar System

Blade style adjustable sway bar (anti roll bar) system is the ultimate choice for performance and tuning. This superior-quality system delivers unique features and advantages that are without rival. It is simply the best.The blade style adjuster mechanism varies roll stiffness with the angle of the blade. Set it vertically for full-stiff, horizontal for full-soft, and intermediate angles for other stiffness levels.

Blade style adjustment offers advantages over traditional adjustable sway bars including faster adjustment and superior geometry.

The rear sway bars fit 66mm bolt spacing on the sway bar mounts as equipped on 1978-1989 911 cars. 1965-1977 cars can be upgraded to the later 66mm type mounts

Perfect Geometry

Fixed-length arms ensure the angle of the drop links are not changed with stiffness adjustment. Geometry and kinematic behavior is always perfect. The bar always rotates freely, with low-friction, and without binding in all adjustment positions.

Traditional sway bars adjust roll stiffness by changing the length of the lever arm, at the same time changing the angle of the drop link. This can cause poor force-transmission angles in some positions. The result can be binding, high-friction, and excessive load on the mounts to the chassis.

Lightweight

Hollow bar reduces weight.

Fast and Easy Adjustment

No need to jack up the car or remove the wheels. Reach under the car, loosen one bolt to rotate the blade type adjuster. The angle of the blade defines the stiffness.
Literally about 1 minute to adjust, faster with practice.Infinitely variable adjustment lets you dial in the precise roll stiffness.

For track cars this fast-adjustment can be invaluable when time in the pits or paddock is short. Adjusting traditional sway bars is a lengthy process – jack up car, remove wheels, adjust, re-install wheels.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

227002

您正在查看的产品与这些编号存在交叉引用关系

Hex head bolt for rear drop link. M12 x 1.5 x 75



Fits:
Porsche 911 1978-89

Click 'Zoom in' for large parts diagram.



相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PCG01015630

您正在查看的产品与这些编号存在交叉引用关系

Hex head bolt for rear drop link. M12 x 1.5 x 60



Fits:
Porsche 911 1978-89
Porsche 964 1989-94
Porsche 928 1978-86

Click 'Zoom in' for large parts diagram.
Diagram ref no 18 (for 911) / no 24  (for 964) / no 19 (for 928)



相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90008203502

您正在查看的产品与这些编号存在交叉引用关系

Hex head bolt for rear drop link. M12 x 1.5 x 60



Fits:
Porsche 911 1978-89
Porsche 964 1989-94
Porsche 928 1978-86

Click 'Zoom in' for large parts diagram.



相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90008203502

您正在查看的产品与这些编号存在交叉引用关系

Performance Rear Anti Roll Bar Drop Link
SET OF 2 Left & Right
SPORT variant with +30% increased rubber hardness from the OE 93033307101 & 93033307201

Fits:
Porsche 911 - 1978 to 1989
Porsche 930 Turbo 3.3ltr - 1978 to 89

Anti-Roll Bar Drop Links using stiffer bushes aimed at Performance and track driving.

Click 'Zoom in' for large parts diagram.
Diagram ref no 12.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

93033307101+201

您正在查看的产品与这些编号存在交叉引用关系

SuperPro Polyurethane Suspension Bush Kit.



Fits:
Porsche 911 1965-73

This kit includes
1 X SPF0893K Gear Linkage Bush Kit 2 Bushes, SuperPro Grease
1 X SPF1436K Front Strut Mount Bush Kit 2 Bushes, 2 Steel Tubes, SuperPro Grease
1 X SPF0526K Front Sway Bar link Bush Kit 4 Bushes, SuperPro Grease
1 X SPF1450-18K Front Sway Bar To Cross Member Mount Kit 2 Bushes, SuperPro Grease
1 X SPF0236AK Front Torsion Bar Pivot Bush Kit 4 Bushes, SuperPro Grease
1 X SPF1375K Rear Engine Mounting Bush Kit 8 Bushes, 4 Steel Tubes, SuperPro Grease
1 X SPF0095-22K Rear Sway Bar Bottom Link Bush Kit 2 Bushes, SuperPro Grease
1 X SPF0134-22K Rear Sway Bar To Chassis Bush 2 Bushes, SuperPro Grease
1 X SPF0236K Torsion Bar Pivot Bush Kit 4 Bushes, SuperPro Grease
1 X SPF0988K Rear Trailing (Banana) Arm Front Bush Kit 4 Bushes, SuperPro Grease


Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components.

SuperPro Polyurethane Suspension Bush Kit.



Fits:
Porsche 911 1974-85 Cars with 18mm Front and 22mm Rear anti-roll bars

This kit includes
1 x SPF0893K Gear Linkage Bush Kit 2 Bushes, SuperPro Grease
1 x SPF1436K Front Strut Mount Bush Kit 2 Bushes, 2 Steel Tubes, SuperPro Grease
1 x SPF0526K Front Sway Bar link Bush Kit 4 Bushes, SuperPro Grease
1 x SPF1450-18K Front Sway Bar To Cross Member Mount Kit 2 Bushes, SuperPro Grease
1x SPF0236AK Front Torsion Bar Pivot Bush Kit 4 Bushes, SuperPro Grease
1 x SPF1375K Rear Engine Mounting Bush Kit 4 Bushes, 2 Steel Tubes, SuperPro Grease
1 x SPF0095-22K Rear Sway Bar Bottom Link Bush Kit 2 Bushes, SuperPro Grease
1 x SPF0134-22K Rear Sway Bar To Chassis Bush 2 Bushes, SuperPro Grease
1 x SPF0236K Torsion Bar Pivot Bush Kit 4 Bushes, SuperPro Grease
1 x SPF0988K Rear Trailing (Banana) Arm Front Bush Kit 4 Bushes, SuperPro Grease

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components.

Rear retro RSR adjustable sway bar.



Fits
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976

Retro RSR Adjustable Sway Bar System

Retro appearance combined with modern performance and features make these adjustable sway bars (anti roll bar) a great choice for period-correct builds.

Drop links

Appearance similar to the RSR originals with a grey colour for a discreet and retro appearance. Left and right threaded precision rod ends make easy work of adjusting front drop link length. Adjustable length makes it easy to eliminate any preload on the bar. Teflon lined rod ends never require lubrication.

Lightweight

Hollow bars weigh half as much as similar solid bars delivering equal stiffness..
Bushings

Teflon impregnated bushings are grease and maintenance free and provide smooth operation and long life.

Through-body style front bar

Installs through the body same as the pre-1974 cars and the early turbo cars. Cars not originally equipped with a through-body sway bar should purchase the optional backer plate kit.

Retro-Look Arms

Steel arms are similar to the original RSR type and have drilled adjustment positions.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

1-RSRRSBA

您正在查看的产品与这些编号存在交叉引用关系