机油散热器/热交换器
Fits:
Porsche 911 ST / RSR
Dimensions:
Power measurement - 280x190x52mm
External dimension - 380x195x52mm
Connections - M30 x 1.5 or M26 x 1.5 outside
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
Custom end tanks with a 45° chamfer
M22 x 1.5 connections - 22" L x 4.75" H x 2.25" W
Dual pass for increased oil cooling
Fits
911/930 models up to 1989
RS style bar and plate oil coolers for air-cooled Porsche 911/930 models (up to 1989). This oil cooler is a direct-fit performance replacement for the original Porsche items but they can also be used as heavy duty universal units
These new oil coolers have custom end tanks with a 45° chamfered front angle, allowing them to fit flush inside '73-style RS/RSR bumpers. The fittings are pointed straight back. For best airflow and highest performance, CSF recommends cutting the front tub to allow for proper air flow, exiting behind the oil cooler and underneath the vehicle. Cutting the front tub will also give clearance to allow adding a rear fan shroud to pull more air through the cooler at slower speeds or while idling
Product Features:
•High Efficiency & Rugged Durability Bar/Plate Design
• M22 x 1.5 Inlet/Outlet Connections
• "Aero-Flow" Bar Design for Lightweight, Strength, and Maximum Flow
• Triangular flush mounting bolts on both top & bottom (M8x1.25)
• Satin Black Finish for Extreme Protection Against Corrosion and Debris
• Pressure Tested at 120psi
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
8201
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Custom end tanks with a 45° chamfer
M22 x 1.5 connections - 22" L x 4.75" H x 2.25" W
Fits
911/930 models up to 1989
RS style bar and plate oil coolers for air-cooled Porsche 911/930 models (up to 1989). This oil cooler is a direct-fit performance replacement for the original Porsche items but they can also be used as heavy duty universal units
These new oil coolers have custom end tanks with a 45° chamfered front angle, allowing them to fit flush inside '73-style RS/RSR bumpers. The fittings are pointed straight back. For best airflow and highest performance, CSF recommends cutting the front tub to allow for proper air flow, exiting behind the oil cooler and underneath the vehicle. Cutting the front tub will also give clearance to allow adding a rear fan shroud to pull more air through the cooler at slower speeds or while idling
Product Features:
•High Efficiency & Rugged Durability Bar/Plate Design
• M22 x 1.5 Inlet/Outlet Connections
• "Aero-Flow" Bar Design for Lightweight, Strength, and Maximum Flow
• Triangular flush mounting bolts on both top & bottom (M8x1.25)
• Satin Black Finish for Extreme Protection Against Corrosion and Debris
• Pressure Tested at 120psi
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
8202
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911S 2.0 1969-71
Porsche 911S 2.2 1969-71
Click 'Zoom in' for large parts diagram.
Diagram ref no 18
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90110708500
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fits:
Porsche 911S 2.0 1969-71
Porsche 911S 2.2 1969-71
Click 'Zoom in' for large parts diagram.
Diagram ref no 18
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90110708500
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fits:
Porsche 911 T-E/E/S 1972
Porsche 911 T-V 1972
Click 'Zoom in' for large parts diagram.
Diagram ref no 33
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91120731802
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fits:
Porsche 911 T-E/E/S 1972
Porsche 911 T-V 1972
Click 'Zoom in' for large parts diagram.
Diagram ref no 33
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91120731802
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
No more guessing, wondering, or hoping about your 911 engine mounted oil coolers. SR009, precisely fabricated from 6061 aluminum, allows you to easily, quickly, and simply test your cooler for leaks. This tool is a must to pressure test all coolers (1965-1989) before re-installation. This high-quality tool is anodized for years of service and includes a liquid filled gauge, Schrader valve, seals and hardware. Order one now to avoid the mess of a leaky cooler and the headache of replacing a cooler on an otherwise fine engine.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
SR009
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Radiator fits in the front under the wing.
Fits:
Porsche 911 2.7 08/73-07/74
Porsche 911 2.7 RS 08/72-07/73
Click 'Zoom in' for large parts diagram.
Diagram ref no 22
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91110704700
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Radiator fits in the front under the wing.
Fits:
Porsche 911 2.7 08/73-07/74
Porsche 911 2.7 RS 08/72-07/73
Click 'Zoom in' for large parts diagram.
Diagram ref no 22
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91110704700
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Radiator type fits in engine compartment.
Fits:
Porsche 911 1965-71
Click 'Zoom in' for large parts diagram.
Diagram ref No 8.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90110704103
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Radiator type fits in engine compartment.
Fits:
Porsche 911 1965-71
Click 'Zoom in' for large parts diagram.
Diagram ref No 8.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90110704103
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Radiator type fits in engine compartment.
Fits:
Porsche 911 1972-89
Click 'Zoom in' for large parts diagram.
Diagram Ref No 8.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91110704102
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
散热器类型适合发动机舱。
适合:
保时捷 911 1972-89
单击“放大”可查看大部件图。
图表参考编号 8。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91110704102
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 S 1969-1971
Click 'Zoom in' for large parts diagram.
Diagram Ref No 17
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90110704603
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fits:
Porsche 911 S 1969-1971
Click 'Zoom in' for large parts diagram.
Diagram Ref No 17
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90110704603
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
OEM+ / High-Performance recreation of the original Behr Oil Cooler
CNC Machined mounting plate with helix design for strength and pocketed for weight savings
Modern Tube & Fin core with lower pressure drop and higher heat dissipation than the original
Stainless Steel Fittings for late model slip-on style (72-89) and early threaded style (65-71) with upgraded M30 “Widemouth” Design for improved flow
All OEM Behr features replicated on the billet mounting plate and cooler case
Comes standard with modern Cerakote titanium finish (additional heat dissipation) – modern interpretation of the OEM Behr finish
Optimized ID and flow characteristics of oil pipe for maximum oil flow through the vehicle’s oil system
Complete drop-in fit, absolutely no modifications to install
Fits:
Porsche 911 - 1972 to 1989
Porsche 911 turbo - 1975 to 1989
Click 'Zoom in' for large parts diagram.
Diagram Ref No 8
After 2+ years of development and 4 rounds of prototypes, the world debut of the CSF Porsche 911/930 Engine Oil Cooler at Rennsport Reunion 2023 was met with resounding enthusiasm. Air-cooled enthusiasts know the struggles associated with the oil cooler located on the engine block of the old flat six motor. CSF’s highly anticipated new release is arguably the most important modern engine upgrade to be released for the 911 in years.
While the original design was effective at the time, they have not aged well. On top of that, there have been no updates to the design and original replacement units can be hard to come by. When the CSF 911 was being built, CSF realized this was a much needed part for the air-cooled community and set out to design something special.
The old original coolers aren’t the only issue though. CSF has gotten many first hand reports of brand new OE coolers from Porsche’s revamped “Porsche Classic” Catalogue leaking within a few months of installation. Apparently the new items available from Porsche are not built as well as the original Behr coolers. CSF has now brought to market a modern OEM+ solution to this vintage design.
The high-performance core uses 7 cooling tubes with 8 rows of fins. Between the ultra efficient fin design and high flow tubes, the CSF cooler is ~10% more efficient than a brand new OE unit and up to 25% more efficient than a used unit.
Because the base plate of the cooler is also a common problem area, CSF sought to improve this area as much as possible. Instead of the original cast design, the CSF cooler uses a CNC machined billet aluminum plate. This offers a perfectly flat mounting surface which is both stronger and more resistant to warping over time. You’ll also notice a special helix design which adds strength while keeping weight at a minimum.
Each unit is Individually Leak and Pressure Tested with a 10 year warranty
New OEM coolers from Porsche are extremely scarce/hard to source and cost $1,300+
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91110704102
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 S 1973
Click 'Zoom in' for large parts diagram.
Diagram Ref No 17
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91110704602
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
M22 x 1.5 connections - 24'L X 5.75'H X 2.16'W
RS style bar and plate oil coolers for air-cooled Porsche 911/930 models (up to 1989). This oil cooler is a direct-fit performance replacement for the original Porsche items but they can also be used as heavy duty universal units!
Product Features
• Heavy duty bar/plate core
• New Aero-flow bar design for low mass, strength and maximum airflow through the core
• Satin Black finish for protection against corrosion and debris
• Triangular flush mounting bolts on both top & bottom (M8x1.25)
• Slight 15 degree angle for connections (M22x1.5 female) with tapered, cast end-tanks
• 609mm Length x 54.6mm Width x 146mm Height
Cross reference numbers
91110705101
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
8110
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
M22 x 1.5 connections - 24'L X 5.75'H X 2.16'W
RS style bar and plate oil coolers for air-cooled Porsche 911/930 models (up to 1989). This oil cooler is a direct-fit performance replacement for the original Porsche items but they can also be used as heavy duty universal units!
Product Features:
• Heavy duty bar/plate core
• New Aero-flow bar design for low mass, strength and maximum airflow through the core
• Satin Black finish for protection against corrosion and debris
• Triangular flush mounting bolts on both top & bottom (M8x1.25)
• Slight 15 degree angle for connections (M22x1.5 female) with tapered, cast end-tanks
• 609mm Length x 54.6mm Width x 146mm Height
Cross reference numbers
91110705101
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
8111
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
保持您的保时捷发动机凉爽并处于适当的温度非常重要,这就是为什么在 Design911,我们为您的保时捷发动机提供全面的产品,包括水管、油管、散热器、水泵、油泵、油冷却器、恒温器、冷却液和油箱均以我们最优惠的低价