赛车运动零件
按品牌过滤
Billet steel conversion driveshaft / axle flanges. Porsche 911 / 914
代码: CMS.914.18T
Finally, conversion axle flanges for early 911s and 914s. These are machined in house from 4340 billet steel and heat treated.
Our custom "coarse spline/18 spline" drive flanges will allow 930 or G50 CV joints (with metal grease caps) to bolt up to the early 1969-75 911s and all 914 transaxles.
Shaft length was designed with the stock open diff in mind. If by off-chance you have a factory LSD, spacers will be required.
Sold in pairs.
Fits
Porsche 911 - 1969 to 1975
Porsche 914
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
CMS.914.18T
您正在查看的产品与这些编号存在交叉引用关系
Our custom "coarse spline/18 spline" drive flanges will allow 930 or G50 CV joints (with metal grease caps) to bolt up to the early 1969-75 911s and all 914 transaxles.
Shaft length was designed with the stock open diff in mind. If by off-chance you have a factory LSD, spacers will be required.
Sold in pairs.
Fits
Porsche 911 - 1969 to 1975
Porsche 914
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
CMS.914.18T
90133223200
PCG33222300
91433222301
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
€1,303.05
当前 €1,276.99
由供应商供货
Billet steel driveshaft / axle flanges for 930 transaxles and 1978 onwards 915
代码: 93033223200/1
Machined in house from 4340 steel and heat treated.
For all 930 4 speed applications and 1978 and later 915.
Spacers are required if you are using with a factory LSD.
Replaces part 930-332-209-12
Sold in pairs.
Notes:
Factory LSD applications will require spacers, otherwise the flanges will be too short.
Designed for use with metal CV gaskets, not paper.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
93033223200
您正在查看的产品与这些编号存在交叉引用关系
For all 930 4 speed applications and 1978 and later 915.
Spacers are required if you are using with a factory LSD.
Replaces part 930-332-209-12
Sold in pairs.
Notes:
Factory LSD applications will require spacers, otherwise the flanges will be too short.
Designed for use with metal CV gaskets, not paper.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
93033223200
93033223200
930.332.232.00
923.332.232.01
93033223200
92333223201
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
€1,303.05
当前 €1,276.99
由供应商供货
离合器拨叉枢轴凸台维修。保时捷 911 / 964 / 993 / 996 / 997
代码: 9XXGFIX
固定离合器分离叉枢轴的一个或两个凸台破裂或折断导致离合器无法工作的情况并不少见。这是一个维修套件,需要进行一些机械加工和拆卸重建,才能专业地维修您的钟形罩,而费用只是更换外壳或整个变速器的一小部分。993 钟形罩仍不再可用。
我们目前的版本使用硬件重新连接新的凸台,而不是焊接,这使得未来的更换更加容易。这是业内最干净的维修。
使用当前版本的枢轴和叉组件。
#罗勒#
适用于所有 G50、G64、993、996T/997T、996/997 GT2/GT3 变速器。
G50、G50/00、G50/01、G50/50、G50/03、G50/04、G50/05、G50/52、G64/00、G64/01、G50/20、G50/21、G50/31、G50/32、G50/33、G64/51、G64/52、G96/50、G96/88、G96/90、G96/92、G96/96、G96/97、G95/50、G97/88、G97/96
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
9XXGFIX
您正在查看的产品与这些编号存在交叉引用关系
我们目前的版本使用硬件重新连接新的凸台,而不是焊接,这使得未来的更换更加容易。这是业内最干净的维修。
使用当前版本的枢轴和叉组件。
#罗勒#
适用于所有 G50、G64、993、996T/997T、996/997 GT2/GT3 变速器。
G50、G50/00、G50/01、G50/50、G50/03、G50/04、G50/05、G50/52、G64/00、G64/01、G50/20、G50/21、G50/31、G50/32、G50/33、G64/51、G64/52、G96/50、G96/88、G96/90、G96/92、G96/96、G96/97、G95/50、G97/88、G97/96
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
9XXGFIX
95011608606
99711608690
CMS.G50.TOBR
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1987-1989 3.2L G50
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
€297.50
当前 €291.55
库存
Gearbox G50 oil pickup adaptor. Porsche G50’s 1987-98 except C4 5 speed
代码: 95030137100/1
Allows you to scavenge oil from the side of a G50 5 or 6 speed transmission bell housing using the factory "blank" in the casting.
While some models are machined from the factory, some will need additional machine work. This is a great solution for a G50 car with low ground clearance that needs an oil cooler.
Machined in house from 6061 billet aluminum
Nicely beveled edges; high attention to detail
VDO 300F temp sender included
-8AN adapter included
Mounting hardware included
For all G50's '87-'98 except C4 5 speed
Not for inverted/mid engine gearboxes
G50/00, G50/01, G50/50, G50/03, G50/04, G50/05, G50/20, G50/21, G50/31, G50/32, G50/33, G64/51, G64/52
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
95030137100
您正在查看的产品与这些编号存在交叉引用关系
While some models are machined from the factory, some will need additional machine work. This is a great solution for a G50 car with low ground clearance that needs an oil cooler.
Machined in house from 6061 billet aluminum
Nicely beveled edges; high attention to detail
VDO 300F temp sender included
-8AN adapter included
Mounting hardware included
For all G50's '87-'98 except C4 5 speed
Not for inverted/mid engine gearboxes
G50/00, G50/01, G50/50, G50/03, G50/04, G50/05, G50/20, G50/21, G50/31, G50/32, G50/33, G64/51, G64/52
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
95030137100
95030137100
950.301.37100
95030137100
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1987-1989 3.2L G50
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
€339.15
当前 €332.37
库存
Gearbox side cover plate G50 5 speed 1987-89 Porsche 911
代码: 95030131204/1
Specifically made for the early G50 5 speed '87-'89 transmission our billet aluminum side cover replaces the thin cast cover that is prone to failure.
Ours is beautifully pocketed and even allows for use of the OEM speed sensor and bracket.
For use with the standard studs, o-ring, axle seal and differential bearing.
Fits G50/00, G50/01, G50/02
Replaces part 950.301.312.04
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
95030131204
您正在查看的产品与这些编号存在交叉引用关系
Ours is beautifully pocketed and even allows for use of the OEM speed sensor and bracket.
For use with the standard studs, o-ring, axle seal and differential bearing.
Fits G50/00, G50/01, G50/02
Replaces part 950.301.312.04
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
95030131204
950.301.312.04
95030131204
95030131204
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1987-1989 3.2L G50
€612.85
当前 €600.59
库存
Selector fork 1ST/2ND Gear shift fork. Porsche 911 1987-94
代码: 95030311101/1
The weakest and most commonly broken shift fork in the G50 5 speed transaxle is the cast aluminium 1st/2nd shift fork.
Our newly designed fork is CNC machined beautifully from aircraft grade billet aluminium and offers the most strength over any fork in the aftermarket. Our fork will also promote enhanced lubrication to 2nd gear as it better captures the idler gear when engaged.
Fits all G50 5 speed Porsche transmissions '87-'94.
(G50/00, G50/01, G50/50, G50/03, G50/04, G50/05, G50/52, G64/00, G64/01)
Replaces part 95030311101
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
95030311101
您正在查看的产品与这些编号存在交叉引用关系
Our newly designed fork is CNC machined beautifully from aircraft grade billet aluminium and offers the most strength over any fork in the aftermarket. Our fork will also promote enhanced lubrication to 2nd gear as it better captures the idler gear when engaged.
Fits all G50 5 speed Porsche transmissions '87-'94.
(G50/00, G50/01, G50/50, G50/03, G50/04, G50/05, G50/52, G64/00, G64/01)
Replaces part 95030311101
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
95030311101
95030311101
950.303.111.01
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
€541.45
当前 €530.62
库存
Selector fork 3RD/4TH Gear shift fork. Porsche 993 C2/C4/Turbo transmissions 1995-98
代码: 95030311304/1
The factory cast aluminum 993 fork suffers from an inherent weakness in which the steel insert that the reverse lever actuates - is prone to failure.
The cast steel RS fork does not have this issue but it's not a billet steel one like ours...and it's less expensive.
Fits all G50 5 speed transmissions '87-'94 and all G50 6 speed transmissions '95-'98 including C4, RS, Turbo and RSR models.
(G50/00, G50/01, G50/50, G50/03, G50/04, G50/05, G50/52, G64/00, G64/01, G50/20, G50/21, G50/31, G50/31, G50/33, G64/51, G64/52)
Replaces part 950.303.113.04, 950.303.103.00, 950.303.113.04, 950.303.103.06
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
95030311304
您正在查看的产品与这些编号存在交叉引用关系
The cast steel RS fork does not have this issue but it's not a billet steel one like ours...and it's less expensive.
Fits all G50 5 speed transmissions '87-'94 and all G50 6 speed transmissions '95-'98 including C4, RS, Turbo and RSR models.
(G50/00, G50/01, G50/50, G50/03, G50/04, G50/05, G50/52, G64/00, G64/01, G50/20, G50/21, G50/31, G50/31, G50/33, G64/51, G64/52)
Replaces part 950.303.113.04, 950.303.103.00, 950.303.113.04, 950.303.103.06
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
95030311304
95030311304
950.303.113.04
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1987-1989 3.2L G50
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
€857.99
当前 €840.83
由供应商供货
显示从1到7(共7个产品)
也可在这些页面找到
您可能也喜欢
流行车型