Torsion Bar

Foam seal front torsion bar adjuster. 



Fits:
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1975 to 1989

Click 'Zoom in' for large parts diagram.
Diagram ref no 21

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90134147500

您正在查看的产品与这些编号存在交叉引用关系

Chrome Moly Light Weight Hollow Front Torsion Bar (SET OF 2)
- 21mm
- 22mm

Tighten up your suspension with these high precision, light weight, hollow torsion bars.

Fabricated from aircraft quality 4130 chrome moly steel, and heat treated for high strength and reliability.

Zinc plated with plugged ends for superior corrosion resistance.

Precision machined splined ends for a perfect fit.

Center less ground and gun drilled for a consistent spring rate.

Lighter weight compared to solid bars with an equivalent stiffness. Up to 3 lbs lighter per bar!

These are the highest quality bars on the market.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

1S166911F

您正在查看的产品与这些编号存在交叉引用关系

Chrome Moly Light Weight Hollow Rear Torsion Bar

Fits:
Porsche 911 87-89 G50 Gearbox cars - Rear

Available in 5 sizes:
- 27mm
- 29mm
- 30mm
- 31mm
- 33mm

Tighten up your suspension with these high precision, light weight, hollow torsion bars.

Fabricated from aircraft quality 4130 chrome moly steel, and heat treated for high strength and reliability.

Zinc plated with plugged ends for superior corrosion resistance.

Precision machined splined ends for a perfect fit.

Center less ground and gun drilled for a consistent spring rate.

Lighter weight compared to solid bars with an equivalent stiffness. Up to 3 lbs lighter per bar!

These are the highest quality bars on the market.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

1S166911TR

您正在查看的产品与这些编号存在交叉引用关系

QuickChange™ Torsion Bars, FRONT
Sold per kit, 1 kit req'd per car.



Fits:
Porsche 911/912/930 1965-89
Porsche 914 1970-76

QuickChange Torsion Bars are Plated & Plugged and include a female threaded end that you can engage with a bolt to use as a handle for easier extraction / insertion.

Use the rears bars in combination with our QuickChange™ Spring Plate products for fast torsion bar swapping and re-indexing. QuickChange™ Torsion Bars can be extracted through the QuickChange™ Spring Plate without removing any bolts. Alignment settings are maintained. You don't even need to remove the wheel from the car. Changing torsion bars is a 5 minute per side operation!

A QuickChange™ Insert is available separately for converting your existing hollow torsion bars.

QuickChange™ Torsion Bars make it easy to dislodge a stuck bar, and thereby offer benefits even when used on the front and with factory spring plates (factory spring do not allow the bars to be extracted without removing the plates).

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

209202

您正在查看的产品与这些编号存在交叉引用关系

QuickChange™ Torsion Bars, REAR
Sold per kit, 1 kit req'd per car.



Fits:
for G50 Transmission
Porsche 911 / 930 1987-89

QuickChange Torsion Bars are Plated & Plugged and include a female threaded end that you can engage with a bolt to use as a handle for easier extraction / insertion.

Use the rears bars in combination with our QuickChange™ Spring Plate products for fast torsion bar swapping and re-indexing. QuickChange™ Torsion Bars can be extracted through the QuickChange™ Spring Plate without removing any bolts. Alignment settings are maintained. You don't even need to remove the wheel from the car. Changing torsion bars is a 5 minute per side operation!

A QuickChange™ Insert is available separately for converting your existing hollow torsion bars.

QuickChange™ Torsion Bars make it easy to dislodge a stuck bar, and thereby offer benefits even when used on the front and with factory spring plates (factory spring do not allow the bars to be extracted without removing the plates).

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

21021

您正在查看的产品与这些编号存在交叉引用关系

Spring plate covers normally rust, replacing them will give you a better ride.



Fits:
Porsche 911 1965-89
Porsche 930 1975-77

Click 'Zoom in' for large parts diagram.
Diagram Ref No. 29

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90133315300

您正在查看的产品与这些编号存在交叉引用关系

弹簧板盖通常会生锈，更换它们会让您的驾驶体验更加舒适。



适合：
保时捷 911 1965-89
保时捷 930 1975-77

单击“放大”可查看大部件图。
图表参考编号 29

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90133315300

您正在查看的产品与这些编号存在交叉引用关系

Torsion bar 19mm. 



Fits:
Porsche 911/911S 1965-67
Porsche 911 S/TU/L 1968
Porsche 911 T/E/S 1969
Porsche 911 T/S 1970-73
Porsche 911 E 1970-73
Porsche 911 CARRERA 2.7L 1970-73
Porsche 912 1965-69
Porsche 911 1974-89
Porsche 911 (930) Turbo 1975-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 34

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90134310

您正在查看的产品与这些编号存在交叉引用关系

Torsion bar clamp, LEFT.



Fits:
Porsche 911 1974-89
Porsche 911 (930) Turbo 1975-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 16

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91134103702

您正在查看的产品与这些编号存在交叉引用关系

Torsion bar clamp, LEFT.



Fits:
Porsche 911 1974-89
Porsche 911 (930) Turbo 1975-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 16

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91134103702

您正在查看的产品与这些编号存在交叉引用关系

Torsion bar protective clamp.



Fits:
Porsche 911 1965-73 Left or Right Side
Porsche 911 1974>> Right Side only
Porsche 911 (930) Turbo 1975-89 Right Side only

Click 'Zoom in' for large parts diagram.
Diagram ref no 16

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90134115900

您正在查看的产品与这些编号存在交叉引用关系

Torsion bar protective clamp.



Fits:
Porsche 911 1965-73 Left or Right Side
Porsche 911 1974>> Right Side only
Porsche 911 (930) Turbo 1975-89 Right Side only

Click 'Zoom in' for large parts diagram.
Diagram ref no 16

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90134115900

您正在查看的产品与这些编号存在交叉引用关系