飞轮/扭矩

Clutch flywheel with starter ring Light weight. Porsche 911 1965-68 / 914-6 70-76
6 Bolt type 215mm



Fits:
Porsche 911 2.0L 1965-69 (not for 912)
Note: early 911's might need to change the starter motor to later type (part number 901604102DX)

Porsche 914 1970-76 (6 cylinder only 914-6)

Lightweight Flywheel with starter ring for Porsche 911 65 - 69

The flywheel with starter ring is an important component in the drive system of a vehicle, including the Porsche 911 from 1965 to 1969. This component has a crucial function in starting the engine.

The flywheel is a round plate that is connected to the crankshaft bearing. It serves as a support for the starter ring, which in turn is connected to the vehicle's starter motor. The starter ring consists of a series of teeth or cams that allow it to mesh with the starter motor. When the driver turns the ignition key, the starter motor is activated and engages the starter ring to turn the crankshaft and start the engine.

The flywheel with starter ring for Porsche 911 from 1965 to 1969 is specially designed and manufactured for these model years. It is made of high quality material to ensure reliable performance and durability. The starter ring is precision manufactured to provide a secure and smooth connection with the starter motor.

When servicing or repairing the drive system of a 1965 to 1969 Porsche 911, it may be necessary to inspect or replace the flywheel with starter ring. Damage or signs of wear can impair the performance of the starter or lead to starting problems. In such cases, it is advisable to replace the defective component with a high-quality spare part to restore optimum engine function.

The flywheel with starter ring is an important element for the smooth starting of the engine of a Porsche 911 from 1965 to 1969. By regular maintenance and the use of high-quality spare parts, car owners can ensure the reliability of their vehicle and improve the driving experience.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90110202602

您正在查看的产品与这些编号存在交叉引用关系

Clutch flywheel with starter ring. Porsche 911 1965-68 / 914-6 70-76
6 Bolt type 215mm



Fits:
Porsche 911 2.0L 1965-69 (not for 912)
Note: early 911's might need to change the starter motor to later type (part number 901604102DX)

Porsche 914 1970-76 (6 cylinder only 914-6)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90110202602

您正在查看的产品与这些编号存在交叉引用关系

Flywheel.
6 Bolt type 215mm



Fits:
Porsche 911 2.0L 1965-69 (not for 912)
Note: early 911's might need to change the starter motor to later type (part number 901604102DX)

Porsche 914 1970-76 (6 cylinder only 914-6)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90110202602

您正在查看的产品与这些编号存在交叉引用关系

Speedi Sleeve for Flywheel End Sealing Surface.



Fits: Crankshaft Flywheel Hub End

Fits:
Porsche 356 1950-65
Porsche 912 1965-69

Speedi Sleeves to Repair Worn, Grooved Seal Surfaces

Over time, sealing surfaces will become grooved, making a good seal impossible.The most economical and fastest method of shaft repair is to install the CR Speedi Sleeve. Speedi Sleeve is a precision engineered piece of stainless steel. It's ultra-thin wall design allows it to be used without changing the sel size ans its finish is perfect for lip sealing applications. Speedi Sleeve is built with removable installation flange. The installation tool included in every box allows the seal to be put in. This avoids the possibility of distortion from heat or other installation methods

Dowel Pin For Flywheel. Sold as EACH. 8 required per engine.



Fits:
Porsche 912
Porsche 356

Click 'Zoom in' for large parts diagram.
Diagram ref no 3

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90010900400

您正在查看的产品与这些编号存在交叉引用关系

Flywheel Gasket.



Fits:
Porsche 356 (not for CARRERA)
Porsche 912 1965-69

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

50202301

您正在查看的产品与这些编号存在交叉引用关系

Flywheel HD gland nut.



Thread count 1.5mm

Fits:
Porsche 356
Porsche 912

Machined from 4140 steel and tested to 700 lb-ft of torque (Porsche factory recommended torque is 400-450 lb-ft).  Fits all 356 and 912 engines.

Note: Each time the gland nut is removed, it must be replaced with a new one.

Click 'Zoom in' for large parts diagram.
Diagram ref no 7

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

61610202501

您正在查看的产品与这些编号存在交叉引用关系

Flywheel Porsche 912 1965-69
Size: 200mm



Fits:
Porsche 912 1965-69

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

61610220401

您正在查看的产品与这些编号存在交叉引用关系

Flywheel Spacer.



Use only one flywheel spacer to achieve proper crankshaft end play

Fits:
Porsche 356 (not for Super 90)
Porsche 912 1965-69

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

36902107

您正在查看的产品与这些编号存在交叉引用关系

Flywheel spigot bearing.



Fits:
Porsche 911 (901 Gearbox)
Porsche 911 upto 1979 (915 Gearbox)

Click 'Zoom in' for large parts diagram.
Diagram ref no. 4

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90110202501

您正在查看的产品与这些编号存在交叉引用关系

Flywheel spigot bearing.



Fits:
Porsche 911 (901 Gearbox)
Porsche 911 upto 1979 (915 Gearbox)

Click 'Zoom in' for large parts diagram.
Diagram ref no. 4

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90110202501

您正在查看的产品与这些编号存在交叉引用关系

轻质铝制飞轮。



适合：
保时捷 911 2.0L 1965-69 带 901 变速箱

特征：
• 重量轻，可提高性能并大幅降低 MOI（转动惯量）
• 可更换隔热罩（摩擦面），无需表面飞轮
• OEM 离合器采用螺栓固定，安装方便
• 高公差制造确保完美无忧安装
• 专为日常表演爱好者的正常街道使用而设计
• 阶梯定位销，使其被离合器盖固定
• 可供专业人士使用的赛车零件
• 最优质的材料，如用于飞轮的 6061-T6 铝、用于隔热罩的处理钢和 OEM 品质的起动器齿圈
• CAD 设计/内部 CNC 加工，实现终极质量控制
• 生产组件一年有限保修

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

106415-11

您正在查看的产品与这些编号存在交叉引用关系

Lock washer for bolting the flywheel to the crankshaft.



Fits:
Porsche 356 (1950 to 1965)
Porsche 911 and 912 (1965 to 1969)

Click 'Zoom in' for large parts diagram.
Diagram ref no 11

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

53902103

您正在查看的产品与这些编号存在交叉引用关系

Sportomatic Gearbox Shaft Sealing Ring.



Fits:
Porsche 911 1965-83
Porsche 914 1970-76

Click 'Zoom in' for large parts diagram.
Diagram ref no 19

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99911318940

您正在查看的产品与这些编号存在交叉引用关系