机油散热器/热交换器
按品牌过滤
Chamfered tank dual-pass oil cooler RSR Style. Porsche 911/930
代码: 8201
Universal dual-pass oil cooler with direct fitment for Porsche 911 center front oil cooler (RS Style).
Custom end tanks with a 45° chamfer
M22 x 1.5 connections - 22" L x 4.75" H x 2.25" W
Dual pass for increased oil cooling
Fits
911/930 models up to 1989
RS style bar and plate oil coolers for air-cooled Porsche 911/930 models (up to 1989). This oil cooler is a direct-fit performance replacement for the original Porsche items but they can also be used as heavy duty universal units
These new oil coolers have custom end tanks with a 45° chamfered front angle, allowing them to fit flush inside '73-style RS/RSR bumpers. The fittings are pointed straight back. For best airflow and highest performance, CSF recommends cutting the front tub to allow for proper air flow, exiting behind the oil cooler and underneath the vehicle. Cutting the front tub will also give clearance to allow adding a rear fan shroud to pull more air through the cooler at slower speeds or while idling
Product Features:
•High Efficiency & Rugged Durability Bar/Plate Design
• M22 x 1.5 Inlet/Outlet Connections
• "Aero-Flow" Bar Design for Lightweight, Strength, and Maximum Flow
• Triangular flush mounting bolts on both top & bottom (M8x1.25)
• Satin Black Finish for Extreme Protection Against Corrosion and Debris
• Pressure Tested at 120psi
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
8201
您正在查看的产品与这些编号存在交叉引用关系
Custom end tanks with a 45° chamfer
M22 x 1.5 connections - 22" L x 4.75" H x 2.25" W
Dual pass for increased oil cooling
Fits
911/930 models up to 1989
RS style bar and plate oil coolers for air-cooled Porsche 911/930 models (up to 1989). This oil cooler is a direct-fit performance replacement for the original Porsche items but they can also be used as heavy duty universal units
These new oil coolers have custom end tanks with a 45° chamfered front angle, allowing them to fit flush inside '73-style RS/RSR bumpers. The fittings are pointed straight back. For best airflow and highest performance, CSF recommends cutting the front tub to allow for proper air flow, exiting behind the oil cooler and underneath the vehicle. Cutting the front tub will also give clearance to allow adding a rear fan shroud to pull more air through the cooler at slower speeds or while idling
Product Features:
•High Efficiency & Rugged Durability Bar/Plate Design
• M22 x 1.5 Inlet/Outlet Connections
• "Aero-Flow" Bar Design for Lightweight, Strength, and Maximum Flow
• Triangular flush mounting bolts on both top & bottom (M8x1.25)
• Satin Black Finish for Extreme Protection Against Corrosion and Debris
• Pressure Tested at 120psi
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
8201
8201
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
£560.00
当前 £548.80
库存
Chamfered tank single-pass oil cooler RSR Style. Porsche 911/930
代码: 8202
Universal single-pass oil cooler with direct fitment for Porsche 911 center front oil cooler (RS Style).
Custom end tanks with a 45° chamfer
M22 x 1.5 connections - 22" L x 4.75" H x 2.25" W
Fits
911/930 models up to 1989
RS style bar and plate oil coolers for air-cooled Porsche 911/930 models (up to 1989). This oil cooler is a direct-fit performance replacement for the original Porsche items but they can also be used as heavy duty universal units
These new oil coolers have custom end tanks with a 45° chamfered front angle, allowing them to fit flush inside '73-style RS/RSR bumpers. The fittings are pointed straight back. For best airflow and highest performance, CSF recommends cutting the front tub to allow for proper air flow, exiting behind the oil cooler and underneath the vehicle. Cutting the front tub will also give clearance to allow adding a rear fan shroud to pull more air through the cooler at slower speeds or while idling
Product Features:
•High Efficiency & Rugged Durability Bar/Plate Design
• M22 x 1.5 Inlet/Outlet Connections
• "Aero-Flow" Bar Design for Lightweight, Strength, and Maximum Flow
• Triangular flush mounting bolts on both top & bottom (M8x1.25)
• Satin Black Finish for Extreme Protection Against Corrosion and Debris
• Pressure Tested at 120psi
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
8202
您正在查看的产品与这些编号存在交叉引用关系
Custom end tanks with a 45° chamfer
M22 x 1.5 connections - 22" L x 4.75" H x 2.25" W
Fits
911/930 models up to 1989
RS style bar and plate oil coolers for air-cooled Porsche 911/930 models (up to 1989). This oil cooler is a direct-fit performance replacement for the original Porsche items but they can also be used as heavy duty universal units
These new oil coolers have custom end tanks with a 45° chamfered front angle, allowing them to fit flush inside '73-style RS/RSR bumpers. The fittings are pointed straight back. For best airflow and highest performance, CSF recommends cutting the front tub to allow for proper air flow, exiting behind the oil cooler and underneath the vehicle. Cutting the front tub will also give clearance to allow adding a rear fan shroud to pull more air through the cooler at slower speeds or while idling
Product Features:
•High Efficiency & Rugged Durability Bar/Plate Design
• M22 x 1.5 Inlet/Outlet Connections
• "Aero-Flow" Bar Design for Lightweight, Strength, and Maximum Flow
• Triangular flush mounting bolts on both top & bottom (M8x1.25)
• Satin Black Finish for Extreme Protection Against Corrosion and Debris
• Pressure Tested at 120psi
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
8202
8202
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
£560.00
当前 £548.80
由供应商供货
Cover plate for oil cooler, RIGHT, incl gaskets. Porsche 911 2,0S / 2,2S 1969-71
代码: 90110708500/1
Cover plate for oil cooler, RIGHT, incl gaskets.
Fits:
Porsche 911S 2.0 1969-71
Porsche 911S 2.2 1969-71
Click 'Zoom in' for large parts diagram.
Diagram ref no 18
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90110708500
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 911S 2.0 1969-71
Porsche 911S 2.2 1969-71
Click 'Zoom in' for large parts diagram.
Diagram ref no 18
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90110708500
91110708500
91110719100
90110719200
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
£523.48
当前 £507.78
由供应商供货
Cover plate for oil cooler, RIGHT. Porsche 911 2,0S / 2,2S 1969-71
代码: 90110708500
Cover plate for oil cooler, RIGHT
Fits:
Porsche 911S 2.0 1969-71
Porsche 911S 2.2 1969-71
Click 'Zoom in' for large parts diagram.
Diagram ref no 18
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90110708500
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 911S 2.0 1969-71
Porsche 911S 2.2 1969-71
Click 'Zoom in' for large parts diagram.
Diagram ref no 18
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90110708500
91110708500
91110719100
90110719200
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
价格: £198.56
由供应商供货
Oil cooler distance bushing. Porsche 912
代码: 6161075420Y
Oil cooler distance bushing.
Fits:
Porsche 912 1965-69
Click 'Zoom in' for large parts diagram.
Diagram ref no 11
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
6161075420Y
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 912 1965-69
Click 'Zoom in' for large parts diagram.
Diagram ref no 11
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
6161075420Y
61610754200
6161075420Y
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
价格: £7.11
库存
Oil cooler distance bushing. Porsche 912
代码: 6161075420Y/1
Oil cooler distance bushing.
Fits:
Porsche 912 1965-69
Click 'Zoom in' for large parts diagram.
Diagram ref no 11
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
6161075420Y
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 912 1965-69
Click 'Zoom in' for large parts diagram.
Diagram ref no 11
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
6161075420Y
61610754200
6161075420Y
011655
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
£3.00
当前 £2.91
库存
Oil cooler tester for Porsche 911
代码: SR009
Oil cooler tester for Porsche 911
No more guessing, wondering, or hoping about your 911 engine mounted oil coolers. SR009, precisely fabricated from 6061 aluminum, allows you to easily, quickly, and simply test your cooler for leaks. This tool is a must to pressure test all coolers (1965-1989) before re-installation. This high-quality tool is anodized for years of service and includes a liquid filled gauge, Schrader valve, seals and hardware. Order one now to avoid the mess of a leaky cooler and the headache of replacing a cooler on an otherwise fine engine.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
SR009
您正在查看的产品与这些编号存在交叉引用关系
No more guessing, wondering, or hoping about your 911 engine mounted oil coolers. SR009, precisely fabricated from 6061 aluminum, allows you to easily, quickly, and simply test your cooler for leaks. This tool is a must to pressure test all coolers (1965-1989) before re-installation. This high-quality tool is anodized for years of service and includes a liquid filled gauge, Schrader valve, seals and hardware. Order one now to avoid the mess of a leaky cooler and the headache of replacing a cooler on an otherwise fine engine.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
SR009
90110704103
91110704102
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
£148.96
当前 £145.98
库存
Radiator engine oil cooler front "Snake Type". Porsche 911 1970-73
代码: 91110704700
Radiator engine oil cooler front "Snake Type".
Radiator fits in the front under the wing.
Fits:
Porsche 911 2.7 08/73-07/74
Porsche 911 2.7 RS 08/72-07/73
Click 'Zoom in' for large parts diagram.
Diagram ref no 22
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91110704700
您正在查看的产品与这些编号存在交叉引用关系
Radiator fits in the front under the wing.
Fits:
Porsche 911 2.7 08/73-07/74
Porsche 911 2.7 RS 08/72-07/73
Click 'Zoom in' for large parts diagram.
Diagram ref no 22
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91110704700
91110704700
91110704600
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
价格: £558.71
由供应商供货
Radiator engine oil cooler front "Snake Type". Porsche 911 1970-73
代码: 91110704700/1
Radiator engine oil cooler front "Snake Type".
Radiator fits in the front under the wing.
Fits:
Porsche 911 2.7 08/73-07/74
Porsche 911 2.7 RS 08/72-07/73
Click 'Zoom in' for large parts diagram.
Diagram ref no 22
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91110704700
您正在查看的产品与这些编号存在交叉引用关系
Radiator fits in the front under the wing.
Fits:
Porsche 911 2.7 08/73-07/74
Porsche 911 2.7 RS 08/72-07/73
Click 'Zoom in' for large parts diagram.
Diagram ref no 22
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91110704700
PS9395
1613500400
91110704700
91110704600
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
£192.00
当前 £186.24
库存
Radiator engine oil cooler. Porsche 911 1965-71
代码: 90110704103
Radiator engine oil cooler with screw socket
Radiator type fits in engine compartment.
Fits:
Porsche 911 1965-71
Click 'Zoom in' for large parts diagram.
Diagram ref No 8.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90110704103
您正在查看的产品与这些编号存在交叉引用关系
Radiator type fits in engine compartment.
Fits:
Porsche 911 1965-71
Click 'Zoom in' for large parts diagram.
Diagram ref No 8.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90110704103
90110704103
90110704102
90110704150
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
价格: £1,017.59
由供应商供货
Radiator engine oil cooler. Porsche 911 1965-71
代码: 90110704103/1
Radiator engine oil cooler with screw socket
Radiator type fits in engine compartment.
Fits:
Porsche 911 1965-71
Click 'Zoom in' for large parts diagram.
Diagram ref No 8.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90110704103
您正在查看的产品与这些编号存在交叉引用关系
Radiator type fits in engine compartment.
Fits:
Porsche 911 1965-71
Click 'Zoom in' for large parts diagram.
Diagram ref No 8.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90110704103
90110704103
90110704102
90110704150
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
£525.00
当前 £509.25
即将抵达
Universal Dual-pass oil cooler RS Style. Porsche 911/930 (up to 1989)
代码: 8110
Universal dual-pass oil cooler with direct fitment for Porsche 911 center front oil cooler (RS Style).
M22 x 1.5 connections - 24'L X 5.75'H X 2.16'W
RS style bar and plate oil coolers for air-cooled Porsche 911/930 models (up to 1989). This oil cooler is a direct-fit performance replacement for the original Porsche items but they can also be used as heavy duty universal units!
Product Features
• Heavy duty bar/plate core
• New Aero-flow bar design for low mass, strength and maximum airflow through the core
• Satin Black finish for protection against corrosion and debris
• Triangular flush mounting bolts on both top & bottom (M8x1.25)
• Slight 15 degree angle for connections (M22x1.5 female) with tapered, cast end-tanks
• 609mm Length x 54.6mm Width x 146mm Height
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
8110
您正在查看的产品与这些编号存在交叉引用关系
M22 x 1.5 connections - 24'L X 5.75'H X 2.16'W
RS style bar and plate oil coolers for air-cooled Porsche 911/930 models (up to 1989). This oil cooler is a direct-fit performance replacement for the original Porsche items but they can also be used as heavy duty universal units!
Product Features
• Heavy duty bar/plate core
• New Aero-flow bar design for low mass, strength and maximum airflow through the core
• Satin Black finish for protection against corrosion and debris
• Triangular flush mounting bolts on both top & bottom (M8x1.25)
• Slight 15 degree angle for connections (M22x1.5 female) with tapered, cast end-tanks
• 609mm Length x 54.6mm Width x 146mm Height
Cross reference numbers
91110705101
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
8110
8110
91110705101
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
£610.00
当前 £597.80
由供应商供货
Universal single-pass oil cooler RSR Style. Porsche 911/930 (up to 1989)
代码: 8111
Universal single-pass oil cooler with direct fitment for Porsche 911 center front oil cooler (RS Style).
M22 x 1.5 connections - 24'L X 5.75'H X 2.16'W
RS style bar and plate oil coolers for air-cooled Porsche 911/930 models (up to 1989). This oil cooler is a direct-fit performance replacement for the original Porsche items but they can also be used as heavy duty universal units!
Product Features:
• Heavy duty bar/plate core
• New Aero-flow bar design for low mass, strength and maximum airflow through the core
• Satin Black finish for protection against corrosion and debris
• Triangular flush mounting bolts on both top & bottom (M8x1.25)
• Slight 15 degree angle for connections (M22x1.5 female) with tapered, cast end-tanks
• 609mm Length x 54.6mm Width x 146mm Height
Cross reference numbers
91110705101
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
8111
您正在查看的产品与这些编号存在交叉引用关系
M22 x 1.5 connections - 24'L X 5.75'H X 2.16'W
RS style bar and plate oil coolers for air-cooled Porsche 911/930 models (up to 1989). This oil cooler is a direct-fit performance replacement for the original Porsche items but they can also be used as heavy duty universal units!
Product Features:
• Heavy duty bar/plate core
• New Aero-flow bar design for low mass, strength and maximum airflow through the core
• Satin Black finish for protection against corrosion and debris
• Triangular flush mounting bolts on both top & bottom (M8x1.25)
• Slight 15 degree angle for connections (M22x1.5 female) with tapered, cast end-tanks
• 609mm Length x 54.6mm Width x 146mm Height
Cross reference numbers
91110705101
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
8111
8111
91110705101
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
£610.00
当前 £597.80
由供应商供货
显示从1到13(共13个产品)
也可在这些页面找到
关于机油散热器/热交换器
保持您的保时捷发动机凉爽并处于适当的温度非常重要,这就是为什么在 Design911,我们为您的保时捷发动机提供全面的产品,包括水管、油管、散热器、水泵、油泵、油冷却器、恒温器、冷却液和油箱均以我们最优惠的低价
您可能也喜欢
流行车型