制动主缸
Brake fluid is one of the most important fluids in a car as without it, stopping the vehicle safely would be impossible. The Brake fluid transmits the force exerted by the driver on the brake pedal onto the wheel brake.
To ensure perfect operation of the brakes, the brake fluid must be changed regularly during inspection or maintenance and tested with the correct brake fluid tester.
Brake fluid should be changed every two years.
The higher the DOT class, the higher the boiling temperature and wet boiling point. Higher DOT classes tend to allow longer maintenance intervals. The DOT standards are based on the American FMVSS-116 standard of the Department of Transportation (DOT).
Boiling Point and Viscosity
Dry Boiling Point - describes the property of the sealed new brake fluid. In this state, the brake fluid is almost anhydrous (substance containing no water). The dry boiling point is usually between 240 and 280°C.
Wet Boiling Point - determines the property of the brake fluid at the end of its life cycle, at a water content of 3.5% the fluid should be replaced. This defined wet boiling point must not be undercut.
Viscosity - describes the flow rate of the brake fluid. The lower the viscosity, the faster the brake fluid flows through the brake system, and the faster the brake signals are transmitted.
Important Notes
• Brake fluid is poisonous and a hazardous waste.
• Be careful when changing. The fluid weakens paints and plastics.
• It must not come into contact with eyes or skin. Always rinse spilled liquid with water.
• Do not pour the liquid into drinking water or mix with used oil.
• The colour of the brake fluid reveals nothing about its quality.
• Brake fluid should be stored in its original packaging and in a dry, cool and well-ventilated place.
DOT 4
Having an extremely high boiling point and lower viscosity than required, it meets and greatly exceeds regulatory standards. Also suitable for vehicles with ABS.
Vapour Lock formation
This sort of habit leaves room for the Vapour Lock, the formation of vapour bubbles due to boiling of the brake fluid that replace the normal fluid and are compressed, thereby sending the brake pedal to its fill stoke (spongy pedal). The origin is incident in the porosity of the tubes that make up the braking circuit, which in time draw moisture into the fluid, drastically reducing the boiling point. The result is a reduced braking efficiency.
Brembo Premium Brake Fluid
Brembo Premium brake fluids have a higher boiling point that exceeds the standard, thus offering superior resistance to the Vapour Lock and ensuring braking efficiency even at low temperatures. With high anti-corrosion properties and resistance to oxidation, Brembo brake fluid also allows for long-term unaltered chemical/physical characteristics of the fluid in operating circuit; therefore, preserving its integrity.
Brake fluid DOT 4 LV (Low Viscosity) Textar.
Textar DOT 4 LV (Low Viscosity) is especially recommended for use in hydraulic brake and clutch systems of vehicles fitted with ESP, ABS and ASR with a high boiling point and outstanding performance at very low temperatures.
DOT 4 LV (Low Viscosity)
Dry Boiling Point ≥ 260° C
Wet Boiling Point ≥ 165° C
Viscosity at -40C < 750 mm2 /s
Brake fluid is one of the most important fluids in a car as without it, stopping the vehicle safely would be impossible. The Brake fluid transmits the force exerted by the driver on the brake pedal onto the wheel brake.
To ensure perfect operation of the brakes, the brake fluid must be changed regularly during inspection or maintenance and tested with the correct brake fluid tester.
Brake fluid should be changed every two years.
The higher the DOT class, the higher the boiling temperature and wet boiling point. Higher DOT classes tend to allow longer maintenance intervals. The DOT standards are based on the American FMVSS-116 standard of the Department of Transportation (DOT).
Boiling Point and Viscosity
Dry Boiling Point - describes the property of the sealed new brake fluid. In this state, the brake fluid is almost anhydrous (substance containing no water). The dry boiling point is usually between 240 and 280°C.
Wet Boiling Point - determines the property of the brake fluid at the end of its life cycle, at a water content of 3.5% the fluid should be replaced. This defined wet boiling point must not be undercut. <
Viscosity - describes the flow rate of the brake fluid. The lower the viscosity, the faster the brake fluid flows through the brake system, and the faster the brake signals are transmitted.
Important Notes
• Brake fluid is poisonous and a hazardous waste.
• Be careful when changing. The fluid weakens paints and plastics.
• It must not come into contact with eyes or skin. Always rinse spilled liquid with water.
• Do not pour the liquid into drinking water or mix with used oil.
• The colour of the brake fluid reveals nothing about its quality.
• Brake fluid should be stored in its original packaging and in a dry, cool and well-ventilated place.
Brake fluid is one of the most important fluids in a car as without it, stopping the vehicle safely would be impossible. The Brake fluid transmits the force exerted by the driver on the brake pedal onto the wheel brake.
To ensure perfect operation of the brakes, the brake fluid must be changed regularly during inspection or maintenance and tested with the correct brake fluid tester.
Brake fluid should be changed every two years.
The higher the DOT class, the higher the boiling temperature and wet boiling point. Higher DOT classes tend to allow longer maintenance intervals. The DOT standards are based on the American FMVSS-116 standard of the Department of Transportation (DOT).
Boiling Point and Viscosity
Dry Boiling Point - describes the property of the sealed new brake fluid. In this state, the brake fluid is almost anhydrous (substance containing no water). The dry boiling point is usually between 240 and 280°C.
Wet Boiling Point - determines the property of the brake fluid at the end of its life cycle, at a water content of 3.5% the fluid should be replaced. This defined wet boiling point must not be undercut.
Viscosity - describes the flow rate of the brake fluid. The lower the viscosity, the faster the brake fluid flows through the brake system, and the faster the brake signals are transmitted.
Important Notes
• Brake fluid is poisonous and a hazardous waste.
• Be careful when changing. The fluid weakens paints and plastics.
• It must not come into contact with eyes or skin. Always rinse spilled liquid with water.
• Do not pour the liquid into drinking water or mix with used oil.
• The colour of the brake fluid reveals nothing about its quality.
• Brake fluid should be stored in its original packaging and in a dry, cool and well-ventilated place.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
95002
您正在查看的产品与这些编号存在交叉引用关系
Sold each.
Fits:
Porsche 924 1976-85
not for Turbo models
Click 'Zoom in' for large parts diagram.
Diagram ref no 16
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
211611817A
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
Sold each.
Fits:
Porsche 924 1976-85
not for Turbo models
Click 'Zoom in' for large parts diagram.
Diagram ref no 16
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
211611817A
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
安装在制动主缸内
#保时捷#
适合:
保时捷 911 1974-86
保时捷 924 1976-80
保时捷 928 1978-95
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
113945515G
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Fits into the Brake master cylinder
Fits:
Porsche 911 1974-86
Porsche 924 1976-80
Porsche 928 1978-95
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
113945515G
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Fits:
Porsche 924 2.0L 1981>>
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
477611017A
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 924 2.0L 1980-85
Fits:
Porsche 924 2.0L (1981 - 1985)
Porsche 924 Turbo 2.0L (1981 - 1982)
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
477611017A
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 924 2.0L 1980-85
Fits:
Porsche 911 Turbo 1978-89
Porsche 924 Turbo 1980
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
92835591302
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 924 Turbo 2.0L 1979-81
Fits:
Porsche 924 / 924 Turbo (1980)
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
477611017
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
Fits:
Porsche 924 2.0L 1975-79
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
477611015A
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
Fits:
Porsche 924 2.0L 1975-79
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
477611015A
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
#保时捷#
适合:
保时捷 924 GT 1980-85
保时捷 924S 1986-88右驾汽车
保时捷 944 1982-85 配备 ATE 品牌气缸的汽车
保时捷 944 / 944 Turbo 1985-1986右驾汽车
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
94435501101
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 Turbo 2.5L 8V 1985-88
Fits:
Porsche 924 GT 1980-85
Porsche 924S 1986-88 RHD Cars
Porsche 944 1982-85 Cars with ATE brand cylinder
Porsche 944 / 944 Turbo 1985-1986 RHD Cars
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
94435501101
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 Turbo 2.5L 8V 1985-88
Fits:
Porsche 924S 1986-88 LHD Cars
Porsche 944 1982-85 Cars with GIRLING brand cylinders
Porsche 944 1985-86 LHD Cars without ABS
Click 'Zoom in' for large parts diagram.
Diagram ref no 1
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
94435501100
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
Fits:
Porsche 924 Turbo 1981-82
Porsche 928/S 4.5L, 4.7L 1978-83
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
92835501104
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
Fits:
Porsche 924 1976-85
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
477698051
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
Fits:
Porsche 911 / 911S / Carrera 3.0 1977>>
Porsche 930 Turbo 1977>>
Porsche 924 1976-85
Porsche 924S 1986-88
Porsche 928 1978-95
Porsche 944 1982-90
Porsche 968 1992-95
Click 'zoom in' for large parts diagram.
Diagram ref no 22.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
95535592100
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
REAR
Porsche 924 / 924 Turbo 1976-80
Click 'Zoom in' for large parts diagram.
Diagram ref 8
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
477611055E
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
REAR
Porsche 924 / 924 Turbo 1976-80
Click 'Zoom in' for large parts diagram.
Diagram ref 8
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
477611055E
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
REAR
Porsche 924 / 924 Turbo 1976-80
Click 'Zoom in' for large parts diagram.
Diagram ref 8
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
477611055E
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81