Driveshafts & Parts
Fits:
Porsche 914 1970-76
Porsche 924 1976-88
Porsche 944 1982-91
Porsche 968 1992-95
Price is for each bolt.
Covers Part Numbers 893407237, N91108201,
Click 'Zoom in' for large parts diagram.
Diagram ref no 4
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
893407237
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 996 GT3 RS 2003-04
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Shaft Length 401.5mm.
Fits:
Porsche 924 1976-85 (not Turbo) Manual cars
Porsche 944 1982-85 (not Turbo) Manual cars
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
477501103
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 944 2.5L 8V 1982-87
Shaft Lenght 401.5mm
Fits:
Porsche 924 1976-85 (not Turbo) Manual cars
Porsche 944 1982-85 (not Turbo) Manual cars
Price is for each Driveshaft.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
477501103
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 944 2.5L 8V 1982-87
Fits Left or Right side
Fits:
Porsche 924S 1986-88 Manual cars
Porsche 944 2.5L, 2.7L 1985>> (not Turbo) Manual cars
Driveshaft:
Length [mm] 540 mm
Outer gearing wheel side 100
Inner diameter [mm] 100 mm
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
95133203806
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
Reconditioned replacement driveshaft
Shaft Length 531.5mm
Fits:
Porsche 924S 1986-88 Manual cars
Porsche 944 2.5L, 2.7L 1985>> (not Turbo) Manual cars
PLEASE NOTE: The old unit must be returned to Design911 in a built state, not in component pieces.
*Reconditioned Drive Shafts are sold on a exchange basis, A surcharge of £40.00 will be held and then refunded when the old one is returned
This driveshaft comes with joints and rubber boots.
Comes with 12 months warranty
Price is for each Driveshaft.
- The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
- Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
- Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
- All surcharges and exchanges are subject to our terms and conditions.
PLEASE NOTE:
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
94433203801
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
Fits:
Porsche 911 3.2 Carrera 1984 to 1989
Porsche 944 1986>>
Porsche 994 S2
Porsche 924S 1986-88
Porsche 928 1978-95
Porsche 986 1992-95
Click 'Zoom in' for large parts diagram.
Diagram ref no 22
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90091009302
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Driveshaft is a mechanical component for transmitting torque and rotation, usually used to connect other components of a drive train that cannot be connected directly because of distance or the need to allow for relative movement between them.
As torque carriers, drive shafts are subject to torsion and shear stress, equivalent to the difference between the input torque and the load. They must therefore be strong enough to bear the stress, whilst avoiding too much additional weight as that would in turn increase their inertia.
- Clutch Kits
- Clutch Kits - High Performance
- Clutch Friction Plate
- Clutch Release Bearings
- Clutch Cables & Parts
- Clutch Guide Tube
- Clutch Forks & Levers
- Clutch Bolts
- Gearbox Parts
- Gasket Sets / Gaskets / Seals / Lock Nuts
- Gearbox Mounts
- Gearshift Control Parts
- Flywheel / Torque
- CV Joints Kits
- CV Boots and Kits
- Cardan Shaft / Prop Shaft
- Gearbox Oil
- Gearbox Sump / Oil Pan
- Rear Differential
- Transmission Cooling
- Motor Sport Parts