Track Rods

转向横拉杆端。
价格为每个

#保时捷#

适合：
保时捷 928 1978-96


转向齿条通过两个横拉杆控制前轮，横拉杆末端是可更换的接头——“横拉杆端”，与旋转轮毂相连。这些接头最终会磨损，导致转向和操控问题，并成为英国 MOT 的缺陷点，可能也是其他国家法定检验的缺陷点。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

92834732202

您正在查看的产品与这些编号存在交叉引用关系

Track rod end.
Price is for each



Fits:
Porsche 928 1978-96

The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

92834732202

您正在查看的产品与这些编号存在交叉引用关系

Track rod end.
Price is for each



Fits:
Porsche 928 1978-96


The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

92834732202

您正在查看的产品与这些编号存在交叉引用关系

The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.



(Shaft size 255mm without ball joint)

Fits:
Porsche 928 1978-85

Price is for each

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

92834703110

您正在查看的产品与这些编号存在交叉引用关系

Track rod for steering rack. Porsche 928 1978-85 (Shaft size 255mm without ball joint) Price is each 

Fits: Porsche 928 1978-85

The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

92834703110

您正在查看的产品与这些编号存在交叉引用关系

转向齿条横拉杆。价格为每根
（轴尺寸 270mm，无球窝接头）

#保时捷#

适合：
保时捷 928 1986-95

转向齿条通过两个横拉杆控制前轮，横拉杆末端是可更换的接头——“横拉杆端”，与旋转轮毂相连。这些接头最终会磨损，导致转向和操控问题，并成为英国 MOT 的缺陷点，可能也是其他国家法定检验的缺陷点。

单击“放大”可查看大部件图。
图表参考编号 4


请注意，图片可能与实际物品不同。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

92834703109

您正在查看的产品与这些编号存在交叉引用关系

Track rod for steering rack. Price is for each.
(Shaft size 270mm without ball joint)



Fits:
Porsche 928 1986-95

The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

92834703109

您正在查看的产品与这些编号存在交叉引用关系

Track rod spacer ring.



Fits:
Porsche 928 1978-81
Only in conj. with:
928.347.010.22
927.347.010.20

Click 'Zoom in' for large parts diagram.
Diagram ref no 3

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

92834732905

您正在查看的产品与这些编号存在交叉引用关系