分销商

分配器传动带警告套件。保时捷 964 / 993

#卡通尼克#

适合：
保时捷 964 - 1989 年至 1994 年
保时捷 993 - 1994 年至 1998 年

产品描述

该套件可警告保时捷 964/993 驾驶员分电器皮带发生灾难性故障。如果继续在皮带断裂的情况下驾驶汽车，次级分电器头驱动皮带故障将导致发动机严重损坏。该套件与现有的发动机冷却系统风扇皮带警告系统集成在一起。

安装后，如果分电器皮带断裂，汽车仪表板上的风扇皮带警告灯将亮起。目视检查发动机舱将揭示仪表板灯亮起的原因是风扇皮带断裂还是分电器皮带断裂。

套件包含：
• 带有集成控制电子设备的盖子
• 连接电缆一套
• 电缆扎带
• 2 块钕磁铁 (5x4x2)，预装在热缩管中
• 1 管粘合凝胶（粘合磁铁的干燥时间为 20-30 秒）
• 1 个传感器元件固定板（蓝色阳极氧化铝板）
• 1 个传感器元件组件
• 1 块酒精清洁垫（用于清洁分配器中金属片的粘合表面）

请注意
套件中不包含分销商

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

96499320

您正在查看的产品与这些编号存在交叉引用关系

Distributor o-ring.



Fits:
Porsche 911 1970-89
Porsche 911 (930) Turbo 1975-89
Porsche 964 1989-94 all models
Porsche 993 1995-98 all models

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91160210201

您正在查看的产品与这些编号存在交叉引用关系

Distributor o-ring.


OEM products manufactured by the Original Equipment Manufacturer.

Fits:
Porsche 911 1970-89
Porsche 911 (930) Turbo 1975-89
Porsche 964 1989-94 all models
Porsche 993 1995-98 all models

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91160210201

您正在查看的产品与这些编号存在交叉引用关系

Distributor Pinion



Fits:
Porsche 911 Carrera 1984-89
Porsche 964 Turbo 3.3L / Turbo 3.6L 1991-94

Clck 'Zoom in' for large parts diagram.
Diagram ref no 5.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

93060242402

您正在查看的产品与这些编号存在交叉引用关系

Distributor repair kit, 5 part kit.



Fits:
Porsche 964 1989-94
Porsche 993 1995-98

Distributor repair kit contains:
1 Qty. Distributor Timing Belt
1 Qty. Pin for Distributor Pinion
3 Qty. German Made Bearings

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99960296402

您正在查看的产品与这些编号存在交叉引用关系

Distributor repair kit, 6 part kit.



Fits:
Porsche 964 1989-94
Porsche 993 1995-98

Distributor repair kit contains:
3 Qty. German Made Bearings
1 Qty. Distributor Timing Belt
1 Qty. Pin for Distributor Pinion
1 Qty. German Made Lower Bearing

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99960296403

您正在查看的产品与这些编号存在交叉引用关系

Distributor Vent Kit.

964 Ventilation Kit includes:
- Distributor ventilation connection (A)
- Rubber Grommet (B)
- White Grommet connector (C)
- Hose (D)

HOW TO FIT: Firstly prise of the oval plate arrowed on the distributor with a screwdriver. Then remove the large black air guide pipe as we need to drill a hole in it at the green dot. The pipe removes by loosening jubilee clips at top and bottom. You will also need to remove two sensor connectors on the pipe. I also removed the two sensors near the distributor so that I had easy access to the plate. Drill at 18mm hole in the pipe, 40mm to the right of the tail light ventilation nipple. Deburr the hole and remove all shavings. Install the rubber grommet (B) into the hole and install the white connector (C) into the grommet.Install the distributor connector (A) into the hole in the distributor where the plate was. Finally refit the air pipe and connect back up all the sensors. Install the hose (D) onto the new distributor and air pipe nipples and route

Fits:
Porsche 964 1990-94
Porsche 993 1995-97

Fits:
Porsche 964 C2 / C4 1989-94
Porsche 993 C2 / C4 / C2S / C4S 1994-98

PLEASE NOTE:

• The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
• Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
• Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
• All surcharges and exchanges are subject to our terms and conditions.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

930602015AX

您正在查看的产品与这些编号存在交叉引用关系

Distributor. Porsche 964 Turbo (965)


Fits:
Porsche 964 Turbo 3.6L

Reconditioned Distributors are sold on a exchange basis, A surcharge will be held and then refunded when the old one is returned

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

965602024X

您正在查看的产品与这些编号存在交叉引用关系