Electronic Fuel Injection Throttle Kits
Patented technology that helps to increase air flow dramatically thus minimising air flow separation and reduces turbulence, resulting in higher volumetric efficiency.
This pristine technology with Knife-edged butterflies has improved inlet airflow and performance significantly. With the individual Throttle blades very close to the inlet valves, the engine and Throttle response are vastly improved. Along with this, we have also found an impressive increase in Horsepower, Torque, Driveability, and an incredible mechanical soundtrack.
Throttle Bodies come fully assembled and ready to bolt directly to the Cylinder Heads, with the following parts included:
• Anodised Aerospace Grade 6082/T6 Billet Aluminium "Shaft-less" Individual Throttle Bodies.
• SLS 3D Printed custom curved Inlets for bonnet clearance around the standard 964/993 models with electronic spoilers.
• Aluminium Ram Pipes & Assembly Tool.
• Throttle Position Sensor (TPS).
• Billet Aluminium Fuel Rails, Including PICO 377cc Fuel Injectors.
• Thermal Insulation Gaskets.
• Throttle Linkage System which connects directly to the existing OEM cable pick-ups.
• Air Filtration System - Includes Megaflow Air Filters complete with brushed aluminium pre-drilled Filter back plates.
Supporting parts that create these Full Plug, Play and Tune - Installation Kits:
• ECU GP Lite (entry level patch loom) including base map package - Comes complete with electrical patch harnesses, hardware, and software.
• Fuelling System - Includes Fuel pressure regulator with gauge, Fuel Lines, fittings, and hoses to interface with existing fuel system
• Vacuum System - Includes vacuum take-off & idle air control assembly, c/w interfacing pipework for cold start engine idle control & brake boost assist.
• Engine Oil breather system - Includes all filters and interfacing components required.
• Heater duct system - with Carbon fibre finish.
**please note
Race Mesh Ram Pipe Installation Kit is not included
this is extra product code 102-101-00086-01 The contents of these kits may vary, from the images provided
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
Patented technology that helps to increase air flow dramatically thus minimising air flow separation and reduces turbulence, resulting in higher volumetric efficiency.
This pristine technology with Knife-edged butterflies has improved inlet airflow and performance significantly. With the individual Throttle blades very close to the inlet valves, the engine and Throttle response are vastly improved. Along with this, we have also found an impressive increase in Horsepower, Torque, Driveability, and an incredible mechanical soundtrack.
Throttle Bodies come fully assembled and ready to bolt directly to the Cylinder Heads, with the following parts included:
• Anodised Aerospace Grade 6082/T6 Billet Aluminium "Shaft-less" Individual Throttle Bodies.
• SLS 3D Printed custom curved Inlets for bonnet clearance around the standard 964/993 models with electronic spoilers.
• Aluminium Ram Pipes & Assembly Tool.
• Throttle Position Sensor (TPS).
• Billet Aluminium Fuel Rails, Including PICO 377cc Fuel Injectors.
• Thermal Insulation Gaskets.
• Throttle Linkage System which connects directly to the existing OEM cable pick-ups.
• Air Filtration System - Includes Megaflow Air Filters complete with brushed aluminium pre-drilled Filter back plates.
Supporting parts that create these Full Plug, Play and Tune - Installation Kits:
• ECU GPA (full harness) including base map package - Comes complete with electrical full harnesses, hardware, and software.
• Fuelling System - Includes Fuel pressure regulator with gauge, Fuel Lines, fittings, and hoses to interface with existing fuel system
• Vacuum System - Includes vacuum take-off & idle air control assembly, c/w interfacing pipework for cold start engine idle control & brake boost assist.
• Engine Oil breather system - Includes all filters and interfacing components required.
• Heater duct system - with Carbon fibre finish.
**please note
Race Mesh Ram Pipe Installation Kit is not included
this is extra product code 102-101-00086-01 The contents of these kits may vary, from the images provided
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
Patented technology that helps to increase air flow dramatically thus minimising air flow separation and reduces turbulence, resulting in higher volumetric efficiency.
This pristine technology with Knife-edged butterflies has improved inlet airflow and performance significantly. With the individual Throttle blades very close to the inlet valves, the engine and Throttle response are vastly improved. Along with this, we have also found an impressive increase in Horsepower, Torque, Driveability, and an incredible mechanical soundtrack.
Throttle Bodies come fully assembled and ready to bolt directly to the Cylinder Heads, with the following parts included:
• Anodised Aerospace Grade 6082/T6 Billet Aluminium "Shaft-less" Individual Throttle Bodies.
• SLS 3D Printed custom curved Inlets for bonnet clearance around the standard 964/993 models with electronic spoilers.
• Aluminium Ram Pipes & Assembly Tool.
• Throttle Position Sensor (TPS).
• Billet Aluminium Fuel Rails, Including PICO 377cc Fuel Injectors.
• Thermal Insulation Gaskets.
• Throttle Linkage System which connects directly to the existing OEM cable pick-ups.
• Air Filtration System - Includes Megaflow Air Filters complete with brushed aluminium pre-drilled Filter back plates.
Supporting parts that create these Full Plug, Play and Tune - Installation Kits:
• ECU including base map package - Comes complete with electrical patch harnesses, hardware, and software.
• Fuelling System - Includes Fuel pressure regulator with gauge, Fuel Lines, fittings, and hoses to interface with existing fuel system
• Vacuum System - Includes vacuum take-off & idle air control assembly, c/w interfacing pipework for cold start engine idle control & brake boost assist.
• Engine Oil breather system - Includes all filters and interfacing components required.
• Heater duct system - with Carbon fibre finish.
**please note
Race Mesh Ram Pipe Installation Kit is not included
this is extra product code 102-101-00086-01 The contents of these kits may vary, from the images provided
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
适合
保时捷 964 C2 - 1989 年至 1994 年
保时捷 964 C4 - 1989 年至 1994 年
#罗勒#
该套件是 964 (911) 点火系统的现代更新。该系统将汽车管理带入数字时代,并可以更好地控制点火和加油。
该套件将用由进气压力管理的现代 MAP 传感器取代限制性的老式空气流量计(谷仓门)。
该套件交付时可与 PPT 点火图一起使用。我们有 3.6 和 3.8 转换的地图,并且可以为您预先安装。
我们最新的套件现在配备了升级的 ECU,并且可以运行宽带传感器(氧传感器)。
我们的套件包含此功能,但传感器需要单独订购。
在开发升级版ECU的同时,我们还改变了进气管;现在,它与工厂空气箱配合使用,在发动机舱中呈现出原样的外观,并将地图传感器和空气温度传感器放置在视线之外。
套件包括:
• 达美700 ECU
• 直接插入接线器
• 地图传感器和气温传感器
• 进气管
• 6 个博世喷油器
• 真空管和T型接头
• PIE Performance 的支持和服务
• Can Bus数据连接工具
我们所有的套件都是 100% 可逆的,无需钻孔或更改组件,我们利用现有的组件
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
964PPT
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
Patented technology that helps to increase air flow dramatically thus minimising air flow separation and reduces turbulence, resulting in higher volumetric efficiency.
This pristine technology with Knife-edged butterflies has improved inlet airflow and performance significantly. With the individual Throttle blades very close to the inlet valves, the engine and Throttle response are vastly improved. Along with this, we have also found an impressive increase in Horsepower, Torque, Driveability, and an incredible mechanical soundtrack.
Throttle Bodies come fully assembled and ready to bolt directly to the Cylinder Heads, with the following parts included:
• Anodised Aerospace Grade 6082/T6 Billet Aluminium "Shaft-less" Individual Throttle Bodies.
• SLS 3D Printed custom curved Inlets for bonnet clearance around the standard 964/993 models with electronic spoilers.
• Aluminium Ram Pipes & Assembly Tool.
• Throttle Position Sensor (TPS).
• Billet Aluminium Fuel Rails, Including PICO 377cc Fuel Injectors.
• Thermal Insulation Gaskets.
• Throttle Linkage System which connects directly to the existing OEM cable pick-ups.
**please note
Race Mesh Ram Pipe Installation Kit is not included
this is extra product code 102-101-00086-01
you will need an EFI Installation & control kit which is not included
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
102-102-00240-01
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Engine Modifications & Upgrades
- IRIDIUM POWER Spark Plugs
- IRIDIUM RACING Spark Plugs
- Hi Flow Air Filters
- Air Induction Kits
- GruppeM Air Induction Kits
- Short GearShift Kits
- Turbo Chargers
- Performance Plenum
- ECU Reader / Fault Finder
- Exhaust Packages
- Fuel Additives
- Pedals / Floor Boards / Track Mats LHD Cars
- Pedals / Floor Boards / Track Mats RHD Cars
- Fire Extinguisher Mounts
- Brey-Krause Fire Extinguisher Mount
- Tow Eye Hooks & Tie Downs
- Alloy Block Off Plates
- Clutches / Flywheels / Hydraulics
- Wössner Forged Piston Kit
- CP Carrillo Pistons
- CP Carrillo Connecting Rods
- Brake Hoses Stainless Steel Goodridge