分电器盖
按品牌过滤
Belt and Pin for Twin IGN Distributor. Porsche 964 1990-94 / 993 1995-97
代码: DISTKIT964
Belt and Pin or Twin IGN Distributor.
A design fault on engines up to August 1993 that you MUST fix if not already done so is to add ventilation to the distributor to prevent ozone perishing the distributor drive belt. If this breaks you will be running on one plug per cylinder and will end up with poor performance and possible damage.
The solutions is to also fit a Venting kit.
Fits:
Porsche 964 1990-94
Porsche 993 1995-97
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
DISTKIT964
您正在查看的产品与这些编号存在交叉引用关系
A design fault on engines up to August 1993 that you MUST fix if not already done so is to add ventilation to the distributor to prevent ozone perishing the distributor drive belt. If this breaks you will be running on one plug per cylinder and will end up with poor performance and possible damage.
The solutions is to also fit a Venting kit.
Fits:
Porsche 964 1990-94
Porsche 993 1995-97
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
DISTKIT964
93060213400
93060292200
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
€24.81
当前 €23.57
库存
分电器盖。保时捷 911 3.2L 1984-89 / 965 Turbo 1991-94
代码: 93060291900
分电器盖
#保时捷#
适合:
保时捷 911 3.2L 1984-89
保时捷 965 1991-94
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
93060291900
您正在查看的产品与这些编号存在交叉引用关系
#保时捷#
适合:
保时捷 911 3.2L 1984-89
保时捷 965 1991-94
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
93060291900
93060291900
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
价格: €183.49
由供应商供货
Distributor cap. Porsche 911 3.2L 1984-89 / 965 Turbo 1991-94
代码: 93060291900/2
Distributor cap.
Fits:
Porsche 911 3.2L 1984-89
Porsche 965 1991-94
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
93060291900
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 911 3.2L 1984-89
Porsche 965 1991-94
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
93060291900
93060291900
1 235 522 368
1235522368
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
€101.15
当前 €99.13
库存
Distributor Vent Kit. Porsche 964 1990-94 / 993 1995-97
代码: 00004320252
Distributor Vent Kit.
964 Ventilation Kit includes:
- Distributor ventilation connection (A)
- Rubber Grommet (B)
- White Grommet connector (C)
- Hose (D)
HOW TO FIT: Firstly prise of the oval plate arrowed on the distributor with a screwdriver. Then remove the large black air guide pipe as we need to drill a hole in it at the green dot. The pipe removes by loosening jubilee clips at top and bottom. You will also need to remove two sensor connectors on the pipe. I also removed the two sensors near the distributor so that I had easy access to the plate. Drill at 18mm hole in the pipe, 40mm to the right of the tail light ventilation nipple. Deburr the hole and remove all shavings. Install the rubber grommet (B) into the hole and install the white connector (C) into the grommet.Install the distributor connector (A) into the hole in the distributor where the plate was. Finally refit the air pipe and connect back up all the sensors. Install the hose (D) onto the new distributor and air pipe nipples and route
Fits:
Porsche 964 1990-94
Porsche 993 1995-97
964 Ventilation Kit includes:
- Distributor ventilation connection (A)
- Rubber Grommet (B)
- White Grommet connector (C)
- Hose (D)
HOW TO FIT: Firstly prise of the oval plate arrowed on the distributor with a screwdriver. Then remove the large black air guide pipe as we need to drill a hole in it at the green dot. The pipe removes by loosening jubilee clips at top and bottom. You will also need to remove two sensor connectors on the pipe. I also removed the two sensors near the distributor so that I had easy access to the plate. Drill at 18mm hole in the pipe, 40mm to the right of the tail light ventilation nipple. Deburr the hole and remove all shavings. Install the rubber grommet (B) into the hole and install the white connector (C) into the grommet.Install the distributor connector (A) into the hole in the distributor where the plate was. Finally refit the air pipe and connect back up all the sensors. Install the hose (D) onto the new distributor and air pipe nipples and route
Fits:
Porsche 964 1990-94
Porsche 993 1995-97
产品车辆组
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
价格: €43.88
库存
显示从1到4(共4个产品)
也可在这些页面找到
您可能也喜欢
流行车型