前扰流板/保险杠

Aerokit Cup Sport Design update package. Porsche 991 Coupe
This package comprises the SportDesign package (Sport Design front apron and rear spoiler)



Only for 911 Carrera Coupe models.

Fits:
Porsche 991 Carrera / Carrera S COUPE 2012>>

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99104480093

您正在查看的产品与这些编号存在交叉引用关系

Aerokit Cup Sport Design update package. Porsche 991 GTS Coupe
This package comprises the SportDesign package (Sport Design front apron and rear spoiler)



Only for 911 Carrera GTS Coupe models.

Fits:
Porsche 991 Carrera GTS COUPE - 2012 to 2016

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99104480079

您正在查看的产品与这些编号存在交叉引用关系

Aerokit Cup.



This package comprises the SportDesign package (SportDesign front apron and rear spoiler) as well as a modified front spoiler lip and a fixed-wing profile on the rear spoiler. Tested and refined in the Porsche wind tunnel, the components increase downforce on both axles and improve handling. They also emphasise the 911's sporting heritage.

If your vehicle is already equipped with the SportDesign front apron or SportDesign package, there is still scope for further enhancement with the Aerokit Cup available from Porsche Tequipment.

Note: reduces ground clearance. To preserve aerodynamic stability, front and rear spoilers may not be fitted separately.

Only for 911 Carrera Coupé models.

Fits:
Porsche 991 Carrera / Carrera S COUPE 2012>>

OPTIONS:
1. 99104480088 - For cars without PDC & Bi-Xenon (Headlamp Cleaning System)
2. 99104480089 - For cars with Bi-Xenon (Headlamp Cleaning System)
3. 99104480090 - For cars with PDC
4. 99104480091 - For cars with PDC & Bi-Xenon (Headlamp Cleaning System)

Please Select below


相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

991044800

您正在查看的产品与这些编号存在交叉引用关系

Carbon fibre front bumper dive plane kit.

Available in Gloss or Matte Carbon Fibre



Fits
Porsche 991.1 GT3 / GT3 RS - 2012 to 2016

The Dive Planes for the Porsche 991.1 GT3/GT3RS were specifically designed to increase front-end downforce, increase the high-pressure airflow to the factory intake duct, and to keep drag increase minimal.

Depending on driver preference, no rear aero is needed to balance out these units. We have seen up to 0.7 second gains due to increased front end grip at high speed corners which allows improved corner speed. If as a driver you feel the car needs more rear stability, we would not suggest these units without adding a rear aerodynamic device.

The units were designed in CAD using scan data and optimized using CFD within ANSYS Fluent.

These units are constructed from 1.5mm thick pre-preg, autoclaved cured, 2x2 twill carbon in both a matte and gloss clear coat.

Dive planes, also referred to as canards, allow you to shift the aero balance forward, possibly aiding you and your setup in balancing out a large rear wing or diffuser.

Kit Includes
• Dive Plane x 4 (Upper x 2, Lower x 2)
• 3M VHB Tape (4 Pieces, 1 for each Dive Plane)
• Install Template

Front air duct splitters - Front grill blades, Carbon Fibre.



Fits:
Porsche 991.1 2012-16 Carrera S models only
This will not fit GTS or SportDesign package.

Rennline’s new carbon fibre front air duct splitters are a great way to give your 991.1 an OEM+ modern appearance while adding a bit of style. Installs in place of the factory grill splitters for a trouble free and satisfying install.

High quality hand-laid pre-impregnated carbon fibre construction
Finished in UV protecting gloss clearcoat
Complete carbon fibre replacement for factory splitters
Designed from OEM grill components
OEM fit and finish

Front bumper air duct splitters, Carbon Fibre.



Fits:
Porsche 991.1 2012-16 Carrera models only

Rennline’s new carbon fibre front air duct splitters are a great way to give your 991.1 an OEM+ modern appearance while adding a bit of style. Installs in place of the factory grill splitters for a trouble free and satisfying install.

High quality hand-laid pre-impregnated carbon fibre construction
Finished in UV protecting gloss clearcoat
Complete carbon fibre replacement for factory splitters
Designed from OEM grill components
OEM fit and finish

Carbon fibre Front bumper air outlet inserts.
Manufactured in carbon fibre prepreg autoclave molded with clear glossy finish.



Fits:
Porsche 991.1 Turbo

Install as replacement of original parts.


Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

SFC99104480076

您正在查看的产品与这些编号存在交叉引用关系

Front bumper air vent grill.
With TÜV parts certificate (§19.3).



Fits:
Porsche 991.1 Carrera / Turbo
Porsche 991.2 Carrera / Turbo

The 991 front bumper air vent grill ensures the best possible aerodynamic properties and is at the same time a beautiful oem+ design element that gives your Porsche a unique appearance.

An important component for both cooling and aerodynamics. Ensuring the rapid removal of hot air. Optimized unit cooling.

This front bumper air vent grill is delivered primed & paint ready. Mounting material is included.

Please note this item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

P991.20.1010

您正在查看的产品与这些编号存在交叉引用关系

Front bumper canards in high gloss carbon fibre. 



Fits:

Porsche 991.1 911 GT3
Porsche 991.1 911 GT3RS
Porsche 991.1 911 R
Porsche 991.2 911 GT2RS

Designed to increase downforce to front end in conjunction these front bumper canards (dive planes) are made using pre-preg autoclave carbon fiber with a high gloss finish. 

Installation can be done with double sided tape to prevent the drilling of holes into factory front bumper.

运动设计外观前保险杠适用于保时捷 911/991 制造年份自 2011 年 9 月起
适用于除 Turbo / Turbo S 之外的所有型号/车身变体

• 包括安装配件（如有必要）
• 包括组装说明
• 目前没有专家意见，因此需要根据 §21 StVZO 进行个人验收。根据要求，我们可以随附材料报告来交付此产品。
• 前保险杠采用创新的高品质材料 Fiberflex。这种新型复合材料的优点：极高的柔韧性与出色的稳定性、抗碎性和不易燃性相结合。极高的生产质量和低重量甚至使其可用于专业赛车。独特的黑色表面具有良好的加工选项，可确保专业效果。
• 均匀的表面结构使喷漆无需大量的准备工作（产品未上漆）
• 材料灵活3

• 我们还提供与该保险杠匹配的前延伸件FA227 。

Front bumper lower splitter kit. Porsche 991.1 GT3 RS

Fits:
Porsche 991.1 GT3 RS

Front splitters are very effective at producing front end downforce without significantly increasing drag and this is done by creating a large pressure delta between the top and bottom surfaces. We then incrementally improved the front splitter by adding design tweaks to the underside of the splitter to improve flow with our carbon splitter diffusers. All of this adds up to a front splitter kit for the 991.1 GT3RS that creates a large amount of additional front end downforce.

The splitter is produced from a carbon thermoplastic, which is the same material used in high forms of Motorsports. The material is not brittle, so no more issues with cracking like carbon fiber and ABS. It will not grab and bend under the car like aluminum units either. It is a great splitter material.

Bracketry was designed from scan data, precision cut and bent to ensure repeatability. The carbon diffusers were developed in CFD to promote flow and improve downforce generation. The splitter was designed to balance out large rear wings, more specifically our V1x for the chassis.

Kit Includes

• Carbon Polyweave Splitter 
• Polyweave Grind Strake x 4
• Carbon Splitter Diffuser x 2
• Sheet Aluminum Diffuser Block Off x 2
• Sheet Metal Bracket Kit x 13
• Steel Cross Beam Tube 
• Clevis x 4
• Splitter Support Rod Assy x 2
• Hardware Kit, Including all Hardware Necessary for a Seamless Install

Features
Greatly Increases Front End Downforce
Produces High Downforce for Large Rear Wings
Capable of Handling 300+ Lbs
Constructed From Carbon Thermoplastic, Which Offers Strength, Low Weight, Durability, and a Great Appearance
Same Material Used in Various Forms of Racing, Including Indy Car, NASCAR, and F1
Non-Invasive / Easy Install

Specifications
Front Splitter is Manufactured From Carbon Thermoplastic, Offering Superior Strength, Weight, Durability, and Appearance to Many Other Options
Will Not Grab and Bend Surfaces Like Aluminum Units
Will Not Crack and Break Like Carbon and ABS Units
Abrasive Resistant While Stiff
CNC Cut and Bent Brackets
Stainless Hardware Throughout

Carbon fibre Front bumper lower spoiler.
Manufactured in carbon fibre prepreg autoclave molded at high temperature & pressure with twill 2×2, 200 gr. fabric. Finish clearcote gloss.



Fits:
Porsche 991.1 Turbo
Porsche 991.2 Turbo
Please note: SF/C/991-505-525-02-G2X/TURBOMK1

Install as replacement of oem front spoiler, does not replace lower inflatable spoiler.


Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

SFC99150552502G2X

您正在查看的产品与这些编号存在交叉引用关系

前保险杠，已上底漆。



适合：
保时捷 991 GT3 RS 2014-21

单击“放大”可查看大部件图。
图表参考编号 1

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99150519196

您正在查看的产品与这些编号存在交叉引用关系

前下扰流板。黑色。



适合：
保时捷 991 GT3 RS 2014-21
适用于配备电子减震器控制装置“PASM”的车辆（选装代码：475）

单击“放大”可查看大部件图。
图表参考编号 14

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

991505525911E0

您正在查看的产品与这些编号存在交叉引用关系

Carbon fibre Front lower spoiler,.
Manufactured in Carbon Fiber prepreg autoclave molded, cured with glossy clear finish.



Fits:
Porsche 991.1 GT3 RS

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

SFC991505525901E0

您正在查看的产品与这些编号存在交叉引用关系

前下扰流板，完整。



适合：
保时捷 991 Turbo S 2014-21

单击“放大”可查看大部件图。
图表参考编号 1

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

991505357051E0

您正在查看的产品与这些编号存在交叉引用关系

Front Spoiler Complete


Fits:
Porsche 991 Turbo 2014>>

Material:
Polyuathane PU

Product Type:
Original Porsche

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

991505357041E0

您正在查看的产品与这些编号存在交叉引用关系

Front spoiler EVO1
With TÜV parts certificate (§19.3)



Fits:
Porsche 991 Turbo | Turbo S

The 991 Turbo EVO1 front spoiler ensures the best possible aerodynamic properties and is at the same time a beautiful oem+ design element that gives your Porsche a unique appearance.

Our front spoiler adapts the factory 911Turbo front bumper and adds an element of visual appeal.
The Porsche active aerodynamic front spoiler functional capability stays and is not impaired.

This front spoiler is delivered primed & paint ready. Mounting material is included.

Please note this item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

P991.20.1020

您正在查看的产品与这些编号存在交叉引用关系

Front spoiler EVO2
With TÜV parts certificate (§19.3)



Fits:
Porsche 991 Turbo | Turbo S

The 991 Turbo evo2 front spoiler ensures the best possible aerodynamic properties and is at the same time a beautiful oem+ design element that gives your Porsche a unique appearance.

EVO2 front spoiler with side wings! this front spoiler adapts the factory 911Turbo front bumper and ads an element of visual appeal.
The Porsche active aerodynamic front spoiler functional capability stays and is not impaired.

This front spoiler is delivered primed & paint ready. Mounting material is included.

Please note this item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

P991.20.1022

您正在查看的产品与这些编号存在交叉引用关系

Front approach / front spoiler lip for Porsche 911(991) GT3 / GT3 RS in cup look.
Front spoiler lip, 3 pieces, suitable for Porsche 911(991) GT3 / GT3 RS year 12/2011-01/2017.
Suitable for the model/body variants GT3 and GT3 RS

PLEASE NOTE: The item can only be used in conjunction with stabilizers. Please CLICK HERE for more information.

• in cup optics
• Extreme contact pressure. Especially for racing purposes
• Without certificate, as specifically for racing purposes
• Including mounting accessories if necessary
• Includes assembly instructions
• The front spoiler lip is made from the innovative and high-quality material Fiberflex. The advantages of this new composite material: Extremely high flexibility combined with great stability, splinter resistance and non-flammability. Very high manufacturing quality and low weight even allow it to be used in professional racing. The characteristic black surface is characterized by good processing options and guarantees professional results. Products made from Fiberflex are ideal for repairs and other conversion work thanks to their excellent cutting and gluing properties.
• Uniform surface structure enables painting without major preparatory work (product is unpainted)
• Material is flexible

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.

Front spoiler lip fit for Porsche 911/991 Year from 9/2011. Fits variants Coupe and Convertible.
Not suitable for Turbo / Turbo / GT2 / GT3 / GT3 RS

• Vehicle-specific TÜV parts certificate
• Mounting accessories, if required
• Assembly Instructions

• Front spoiler lip is from high-quality materials
• Uniform surface structure allows painting without much preparatory work (Product is not painted)
• Material is flexible.

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.

Front spoiler lip fit for Porsche 911/991 Year from 9/2011. Fits variants Coupe and Convertible.
Not suitable for Turbo / Turbo / GT2 / GT3 / GT3 RS

• Vehicle-specific TÜV parts certificate
• Mounting accessories, if required
• Assembly Instructions

• Front spoiler lip is from high-quality materials
• Uniform surface structure allows painting without much preparatory work (Product is not painted)
• Material is flexible.

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.

Front spoiler lip fit for Porsche 911 (991) from 09/2011. Fits variants Coupe and Convertible
NOT suitable for Turbo / Turbo / GT2 / GT3 / GT3 RS

• Vehicle-specific TÜV parts certificate
• Mounting accessories, if required
• assembly Instructions
• Front spoiler lip is from high-quality materials and innovative
• Uniform surface structure allows painting without much preparatory work (Product is not painted)
• Material is flexible

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.

前扰流唇（3 件式）适合保时捷 991.1 GTS / Aerokit。适用于轿跑车和敞篷车。

• 车辆专用 TÜV 零件证书
• 包括。组装说明
• 前扰流唇由创新的优质材料Fiberflex 制成。这种新型复合材料的优点：极高的柔韧性以及出色的稳定性、抗碎裂性和不易燃性。非常高的生产质量和低重量甚至可以应用于专业赛车。特有的黑色表面具有良好的加工可能性，并保证专业的效果。 CSR-Automotive 的 Fiberflex 产品具有最佳的切割和粘合性能，非常适合修复和进一步转换工作。
• 均匀的表面结构无需太多准备工作即可进行喷漆（产品未喷漆）
• 材料灵活

请注意：这是特殊订单商品，可能需要 8-12 周才能交货，并且一旦订购就无法取消。

Front spoiler lip. Black.



Fits:
Porsche 991.1 Turbo S 2014-16
Porsche 991.2 Turbo S 2016>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

991505557101E0

您正在查看的产品与这些编号存在交叉引用关系

Front apron / front spoiler lip suitable for Porsche 991 model year 12/2011 - 01/2017
Suitable for the GT3 model/body variant

• Including assembly instructions
• The front spoiler lip is made from the innovative and high-quality material Fiberflex. The advantages of this new composite material: Extremely high flexibility combined with great stability, shatter resistance and non-flammability. A very high production quality and the low weight even allow it to be used in professional racing. The characteristic black surface is characterized by good processing options and guarantees professional results.
• Uniform surface structure enables painting without extensive preparatory work (product is unpainted)
• Material is flexible

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.

Front spoiler pneumatic system.



Fits:
Porsche 991 Turbo 2014-18

Click 'Zoom in' for large parts diagram.
Diagram ref no 14

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99135819103

您正在查看的产品与这些编号存在交叉引用关系

Rennline front lower spoiler carbon fibre. 

for cars with standard bumpers



Fits:
Porsche 991.1 Carrera / Carrera 4 - 2012 to 2016
Porsche 991.1 Carrera S / Carrera 4S - 2012 to 2016

Product Description

Rennline's carbon fiber front lip is a great way to give your 991 an eye-catching OEM+ upgrade. 
This carbon front lip was 3D scanned, designed, and prototyped in house. 

Made from hand-laid carbon fiber using the latest manufacturing technologies, our front lip will add a completely bespoke feel to your 991.

• Hand-laid carbon fiber construction
• High gloss finish with UV and heat protection
• Designed from the ground up using state of the art 3D scanning technology
• Fits all 991.1 Carrera/Carrera S models with standard bumpers
• Does not fit wide body cars
• OEM fit and finish

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

E232

您正在查看的产品与这些编号存在交叉引用关系

SportDesign Front bumper with Apron.



Components have been purposefully refined in the Porsche wind tunnel to reduce lift. The newly styled front apron with distinctive spoiler lip creates an uncompromisingly sporty appearance. If your vehicle is already equipped with the Sport Design front apron, there is still scope for further enhancement with the Aerokit Cup available from Porsche Tequipment. Note: reduces ground clearance.

Fits:
Porsche 991 Carrera / Carrera S COUPE 2012>>
Porsche 991 Carrera / Carrera S CABRIO 2012>>

OPTIONS:
1. 99104480280 - For cars without PDC & Bi-Xenon (Headlamp Cleaning System)
2. 99104480281 - For cars with Bi-Xenon (Headlamp Cleaning System)
3. 99104480282 - For cars with PDC

4. 99104480283 - For cars with PDC & Bi-Xenon (Headlamp Cleaning System)

Please select below

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

9910448028

您正在查看的产品与这些编号存在交叉引用关系

SportDesign Package.



The SportDesign package includes not only the SportDesign front apron with distinctive spoiler lip, but also a rear spoiler that emphasises the ultra-sporty look of the new 911 model range and helps to reduce lift.

If your vehicle is already equipped with the SportDesign package, there is still scope for further enhancement with the Aerokit Cup available from Porsche Tequipment.

Note: reduces ground clearance. To preserve aerodynamic stability, front and rear spoilers may not be fitted separately.

Fits:
Porsche 991 Carrera / Carrera S COUPE 2012>>
Porsche 991 Carrera / Carrera S CABRIO 2012>>

OPTIONS:
1. 99104480284 - For cars without PDC & Bi-Xenon (Headlamp Cleaning System)
2. 99104480285 - For cars with Bi-Xenon (Headlamp Cleaning System) 
3. 99104480286 - For cars with PDC
4. 99104480287 - For cars with PDC & Bi-Xenon (Headlamp Cleaning System)

Please Select below

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99104480

您正在查看的产品与这些编号存在交叉引用关系

TechArt carbon fibre front bumper air vent grille.



Fits:
Porsche 718 Boxster / Cayman- 2017>>
Porsche 991.1 / 991.2 - 2012>>

The TECHART air outlet grille is made from carbon fibre and fits into the the front bumper.

The carbon parts are made in TECHART's in-house carbon fibre shop and are available in matt or in glossy surface finish

Please note this item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

09112118200

您正在查看的产品与这些编号存在交叉引用关系

TechArt Carbon fibre front bumper grille airblades.



Fits:
Porsche 991.1 turbo
Porsche 991.1 turbo S

Front bumper radiator air inlet surround (airblade) sits on the outer edge of the radiator inlet

Sold as a Pair and Available in Gloss or Matt Finish

Picture show airblades and aero wings

The carbon parts are made in TECHART's in-house carbon fibre shop

Please note this item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

09112119400

您正在查看的产品与这些编号存在交叉引用关系

TechArt Front bumper aero wings.



Fits:
Porsche 991.1 Carrera / Carrera S
Porsche 991.1 Carrera 4 / Carrera 4S

Not for GTS models

Aero wings are the angled, near vertical trims that straddle the horizontal trim bars and fit on the inner section the radiator inlet.

Sold as a pair in paintable PU material

Please note this item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

09110011

091.100.110.009

091.100.111.009

您正在查看的产品与这些编号存在交叉引用关系