催化剂/旁路

Akrapovic link pipe set w cat (SS)



Fits:
Porsche 911 (991.2) Turbo / Turbo S 2018>>

Constructed from high-quality stainless steel , this optional addition to the Slip-On Line will enhance the sound of the exhaust, and power will be taken to greater heights. Fitted with sporty catalytic converters, installing this option increases the engine's performance and adds an aural improvement for all to appreciate. Providing improved flow for the exhaust gases, the link pipes take the 911 to greater heights.

THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

L-PO

您正在查看的产品与这些编号存在交叉引用关系

Exhaust cat bypass pipes with gaskets.



Fits:
Porsche 991.1 Turbo / Turbo S

Porsche 991.2 Turbo / Turbo S

Free-flowing straight pipes replace the bulky & restrictive factory catalytic converters; designed specifically for maximum flow during racing or competition.

FEATURES:
• Maximizes power and throttle response while decreasing back pressure.
• Completely removes the catalytic converters for maximum exhaust flow and performance.
• Constructed from high-quality stainless steel for optimum flow and maximum durability.
• Direct replacement bolt-on for stock cat or Sport Cats

DISCLAIMER: This product removes the OEM catalytic converters from the vehicle, and as such, is strictly intended for closed track events and off-road use only. This product is or contains a Racing Cat Bypass Pipe, which will give you check engine lights on OBD2 cars. We suggest pairing this product with racing software to prevent fault codes and check engine lights. Racing Cat Bypass Pipes are solely intended for track and race cars as they are NOT California Air Resources Board Certified and not EPA certified. You are hereby informed and warned to check your local, state, and federals laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts.

Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1^st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only. 

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3606109916

您正在查看的产品与这些编号存在交叉引用关系

Fabspeed Exhaust Catbypass Pipes.



Increase exhaust flow from the headers to the mufflers and improving power and sound by removing the bulky and restrictive factory catalytic converter.

FEATURES:
• Fits all 991.2 Turbo vehicles (2017+)
• Fabspeed's Catbypass Pipes replace the restrictive factory catalytic converters with much less restrictive straight-through pipes for maximum flow and performance
• Noticeable increase in power and improved throttle response
• Saves 10 lbs in the rear of the vehicle versus the bulky factory catalytic converters
• Adds aggressive exhaust note for high performance sound
• Constructed from high-quality 14-16 gauge C.N.C. mandrel-bent T304L stainless steel for optimum flow and maximum durability
• Direct bolt-on replacement
• All Fabspeed performance products are backed by the Fabspeed Lifetime Limited Warranty

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1^st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only. 


相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

FSPOR9912TCB

您正在查看的产品与这些编号存在交叉引用关系

Fabspeed Exhaust Sport Catalytic Converters.

High-flowing, direct bolt-on replacement for the bulky & restrictive factory catalytic converters.

FEATURES:
• Fits all 991.2 Turbo vehicles (2017+)
• Improves power and throttle response while decreasing back pressure
• High flow sport race cat for maximum flow and power.
• Constructed from high-quality 14-16 gauge T304L stainless steel for optimum flow and maximum durability
• Includes intergrated O2 sensor bung for fuel-injected cars
• Direct replacement bolt-on for stock cat or catbypass pipe

NOTE: Fabspeed's 200-cell high-flow catalytic converters are not C.A.R.B. certified and are for Off-Road Use ONLY in the state of California

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1^st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only. 

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

FSPOR9912TSC

您正在查看的产品与这些编号存在交叉引用关系

Lambda Sensor Blanking Plug and Receiver Socket Set.
In case you need to relocate your existing lambda probe because it's not in the right location. Welding and cutting specialist required.


Fits:
Many Porsche vehicles. Universal kit.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

100390100392

您正在查看的产品与这些编号存在交叉引用关系

Sports exhaust catalytic converter delete pipes Porsche 911 turbo and 911 turbo S 2013-2019
Fits both 991.1 and 991.2



Fits 2013-2019
Porsche 911 turbo 991.1
Porsche 911 turbo S 991.1
Porsche 911 turbo 991.2
Porsche 911 turbo S 991.2

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector.

CATALYTIC CONVERTER REMOVAL
Complete removal of the catalytic converter minimises exhaust back pressure and delivers optimum results in terms of performance and weight reduction.

ECU REMAPPING - ENGINE LIGHT
Replacement or removal of components such as catalytic converters, GPFs and electric actuators may cause the engine warning light to come on. In this case, the installer must reprogram the software to eliminate the light.

MATERIAL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal.

MAIN PIPE DIMENSION - 65mm
This is the diameter of the main pipe of the exhaust system.

Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1^st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only. 

Sports exhaust catalytic converter cell reduction pipe Porsche 911 turbo and 911 turbo S 2013-2019



Fits
Porsche 911 turbo 991.1
Porsche 911 turbo S 991.1
Porsche 911 turbo 991.2
Porsche 911 turbo S 991.2
2013-2019

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance.
They are not street legal and must be installed by professionals in the sector

CATALYTIC CONVERTER REDUCED TO 200 CELLS
Race catalytic converters have fewer cells than standard factory systems. This reduces exhaust back pressure while still maintaining the operation of the catalytic converter, and improves performance and sound

ECU REMAPPING - FOR PERFORMANCE
On turbo cars, catalytic converter replacement may modify turbocharger operating conditions and cause a deterioration of the torque delivery curve. To ensure full benefit from the new racing component, the engine's ECU must be reprogrammed to maximise performance. If the engine warning light comes on, the ECU must always be reprogrammed to eliminate it

MATERIAL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

MAIN PIPE DIMENSION - 65mm
This is the diameter of the main pipe of the exhaust system

Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1^st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only.