陶瓷制动盘替换件

Replacement for CERAMIC Discs - DRILLED
Made of HTCIC (High-Tech-Cast Iron-Carbon)



Characteristics "Drilled":

Drilled brake discs lead off the emerging braking heat faster than undrilled discs because of the high ventilation at the bigger radiation surface.

The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.

This kit consists of the following parts:

... for the front axle:
- Brake disc type drilled, front axle 410 x 36 mm left
- Brake disc type drilled, front axle 410 x 36 mm right
- Mounting kit retaining the original brake disc hat, front axle



... for the rear axle:
- Brake disc type drilled, rear axle 390 x 30 mm left
- Brake disc type drilled, rear axle 390 x 30 mm right
- Mounting kit retaining the original brake disc hat, rear axle

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2121121

您正在查看的产品与这些编号存在交叉引用关系

Replacement for CERAMIC PCCB Discs - WET
Made of HTCIC (High-Tech-Cast Iron-Carbon)



Characteristics "WET":

Profiled brake discs disperse the water film from the brake disc surface within fractions of a second and provide a very short response time also in case of pouring rain.

Delivery period: approx. 20 working days

The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.

This kit consists of the following parts:

... for the front axle:
- Brake disc type drilled, front axle 410 x 36 mm left
- Brake disc type drilled, front axle 410 x 36 mm right
- Mounting kit retaining the original brake disc hat, front axle



... for the rear axle:
- Brake disc type drilled, rear axle 390 x 30 mm left
- Brake disc type drilled, rear axle 390 x 30 mm right
- Mounting kit retaining the original brake disc hat, rear axle

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2121122

您正在查看的产品与这些编号存在交叉引用关系

Replacement for CERAMIC Discs - WAVE
Made of HTCIC (High-Tech-Cast Iron-Carbon)



Characteristics "WAVE":

Lowest weight and maximum deceleration values because of biggest radiation surface and also optimum brake pad cleaning milling (ursprünglich: vent) make this disc a vantage for motorsport use with varying conditions.

Delivery period: approx. 20 working days

The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.

This kit consists of the following parts:

... for the front axle:
- Brake disc type drilled, front axle 410 x 36 mm left
- Brake disc type drilled, front axle 410 x 36 mm right
- Mounting kit retaining the original brake disc hat, front axle



... for the rear axle:
- Brake disc type drilled, rear axle 390 x 30 mm left
- Brake disc type drilled, rear axle 390 x 30 mm right
- Mounting kit retaining the original brake disc hat, rear axle

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2121123

您正在查看的产品与这些编号存在交叉引用关系

Two-piece floating slotted Direct Drive V3 front iron disc PCCB conversion (including road centre-lock wheels).

Dimensions : 410 × 62 × 34 mm



This Product Fits:

Porsche 991 GT2 / GT2 RS 2012>>
Porsche 991 GT3 / GT3 RS / Turbo 2012>> incl 991.2
Porsche 981C Cayman GT4 2014>>
PCCB iron disc replacement

Ever since the disc brake was invented vibration and pulsation caused by thermal expansion has been a major issue giving rise to warped discs - until now?

PFC has released new V3 disc and hat technology. The advanced design features a patented attachment design that uses a retention ring that holds the hat and disc together.

The ring means no need for torque wrenches, and no hassle. The ability to change a disc quickly and efficiently saves time and effort. As well as being convenient, the new V3 technology is much lighter than previous designs, making it easier to put on and pull off, and making the vehicle lighter.

This V3 disc retention method is based on the use of a two-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat.

● Exceptional manufacturing standards - Run out less than 0.0254mm, Thickness variation less than 0.00762mm. Surface finishes less than .7 microns.When used in conjunction with Z rated fast road/track day pads, component life and on track performance markedly improved over competitors pads.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

410.069.6

您正在查看的产品与这些编号存在交叉引用关系

PFC Racing 前后制动器套件，带有开槽赛道日/竞赛 380 x 34mm 前盘组件和 380 x 30mm 后盘组件。

#全氟辛烷磺酸#

适合：
保时捷 996 / 997 / 991 Turbo 包括 PCCB
以及一些 4WD 版本，包括 Carrera 4 和 4S

请在订购前发送车轮装配信息。某些型材可能存在间隙问题。

PFC 高性能制动套件包括：
• 锻造 ZR95 6 活塞前卡钳
• 锻造 ZR96 4 活塞后卡钳
• 合金帽上的前直接驱动 V3 盘（零件编号 380.069.63 / 380.069.64）
• 合金帽上的后部直接驱动 V3 盘（零件编号 380.067.63 / 380.067.64）
• 比赛规格刹车片（FA 7995.11.22.44 / RA 7969.11.20.44）
• 硬件（零件编号 225.143.335.21 FA 支架套件 / 130.288.120.21 RA 垫片套件）
• 专为比赛和赛道使用而定制设计
• 真正的比赛技术

PFC 套件提供最佳的制动性能，而且外观精美！

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0380.0002

您正在查看的产品与这些编号存在交叉引用关系

PFC Racing Front and rear brake kit with Slotted trackday / race 405 x 34mm front and 380 x 30mm rear disc assemblies.



Fits:
Porsche 996 / 997 / 991 Turbo including PCCB
and some 4WD versions including Carrera 4 & 4S

Please send wheel fitment information before ordering. There can be clearance issues with some profiles.

PFC high performance brake kits include:
• Forged ZR95 6-piston front caliper (part no 95.405.290.365.11 / 95.405.290.365.12)
• Forged ZR96 4-piston rear caliper (part no 96.380.290.365.01 / 96.380.290.365.02)
• Front Direct Drive V3 discs on alloy hats (part no 405.069.63 / 405.069.64)
• Rear Direct Drive V3 discs on alloy hats (part no 380.067.63 / 380.067.64)
• Race-specification brake pads (FA 7995.11.22.44 / RA 7969.11.20.44)
• Hardware (part no 225.143.460.21 FA Bracket Kit / 130.288.120.21 RA Spacer Kit)
• Custom-engineered for race and track use
• Genuine race technology

PFC kits offer the best braking performance available, along with great looks!

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0405.0002

您正在查看的产品与这些编号存在交叉引用关系

Two-piece floating slotted Direct Drive V3 rear iron disc PCCB disc conversion (including road centre-lock wheels) .

Dimensions : 390 × 65 × 32 mm



This Product Fits:

Porsche 991 GT2 / GT2 RS 2012>>
Porsche 991 GT3 / GT3 RS / Turbo 2012>> incl 991.2
Porsche 981C Cayman GT4 2014>>
PCCB iron disc replacement

Ever since the disc brake was invented vibration and pulsation caused by thermal expansion has been a major issue giving rise to warped discs - until now?

PFC has released new V3 disc and hat technology. The advanced design features a patented attachment design that uses a retention ring that holds the hat and disc together.

The ring means no need for torque wrenches, and no hassle. The ability to change a disc quickly and efficiently saves time and effort. As well as being convenient, the new V3 technology is much lighter than previous designs, making it easier to put on and pull off, and making the vehicle lighter.

This V3 disc retention method is based on the use of a two-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat.

● Exceptional manufacturing standards - Run out less than 0.0254mm, Thickness variation less than 0.00762mm. Surface finishes less than .7 microns.When used in conjunction with Z rated fast road/track day pads, component life and on track performance markedly improved over competitors pads.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

390.075.6

您正在查看的产品与这些编号存在交叉引用关系

Zimmermann Formula:R race rear brake pads. 
Designed exclusively for cast-iron brake discs

The Formula:R product line is the result of collaboration with the Zimmermann-sponsored racing team. 

RACETRACK USE ONLY:




Porsche 981 Cayman GT4 - 2015 to 2016
Porsche 718 Cayman GT4 4.0ltr  - 2017 Onwards
Porsche 991.2 GT3 / GT3 RS - 2015 to 2018
Porsche 991.2 GT2 RS - 2018 
Porsche 991.2 Speedster
Porsche 991 turbo / turbo S - 2013 to 2018
Porsche 991 R
Porsche 992 Carrera 4S 3.0ltr
Porsche 992 GT3 - 2021 Onwards
Porsche 918 Spyder


Formula:R Brake Pads – for your perfect braking point. 

Compound Type:

OZ 10: suitable for long distance series and sprint distances; optimally tuned friction mixture for the rear axle, perfect in combination with the friction mixture OZ 20 or OZ 30 on the front axle.

The mixtures of the friction material of Formula:R brake pads are individually developed in cooperation with our racing team and are successfully tested in endurance racing. The durability of brake discs and brake pads are just as important as a stable friction coefficient, which ensures that the pads are extremely fading-resistant. To adapt the pads to the individual requirements of different drivers, different friction compounds are available for some applications.

Zimmermann has been manufacturing high-quality brake parts at the Sinsheim site for more than 60 years. Our brake parts are used successfully in the Nürburgring Endurance Series (NLS) under the extreme conditions at the Nürburgring and are constantly being further developed.

Made in Germany

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99135294701ZIMFR

您正在查看的产品与这些编号存在交叉引用关系