MOMO Steering Wheels

Heritage leather embossed crest horn push button cigar brown

Description
For the first time in history, an embossed leather horn button is now available from MOMO

The MOMO Heritage Brown Cigar Leather horn push has two electrical contacts enabling ease of fitment across all vehicles in today’s market.
Featuring the Heritage stacked MOMO logo embossed into the premium Brown Cigar leather, this horn button is 100% handmade in Italy. 

This Horn Button will fit all MOMO Steering Wheel Models, and must be used with the "Standard Profile" Retaining Ring (M22135311115)

MOMO Air Bag Resistor



Cleverly designed to attach to the existing airbag wiring system when the original airbag steering wheel is removed, the MOMO Airbag Resistor allows users the freedom to fit non-airbag hub kits to vehicles equipped with an airbag by cancelling the dash mounted warning light which illuminates if the ECU senses a change to the airbag status.

Please Note: This product is designed to cancel the airbag warning light, thus disabling the airbag system.

MOMO 喇叭按钮 2 触点 - 压纹黑色皮革箭头



MOMO 史上首次推出压花皮革牛角纽扣！

MOMO Arrow 黑色皮革喇叭按钮具有两个电触点，可轻松安装在当今市场上的所有车辆上。

采用优质黑色皮革压印 MOMO 箭头标志，100% 意大利手工制作。

此喇叭按钮适合所有 MOMO 方向盘型号，且必须与“低调”固定环 (M22135311116) 一起使用

MOMO Horn button retaining ring - Low Profile



Used to attach a MOMO Horn Button to any MOMO steering wheel, this Horn Button Retaining Ring is compatible with all flush-fitment MOMO horn buttons that require a securing plate from the rear of the steering wheel.

Attached between the MOMO Hub Kit and steering wheel this part enables you to safely secure the horn button in place.

To be used with Flush fitment horn buttons which sit flush to the steering wheel face.

Outer Diameter: 80mm
Inner Diameter: 51mm
Bolt Hole Diameter: 0.65mm
Fitment: 6 Bolt

Heritage leather embossed crest horn push button cigar brown

Description

Used to attach a MOMO Horn Button to any MOMO steering wheel, this Horn Button Retaining Ring is compatible with all MOMO horn buttons that require a securing plate from the rear of the steering wheel.

Attached between the MOMO Hub Kit and steering wheel this part enables you to safely secure the horn button in place.

To be used with "Standard" fitment horn buttons which sit Proud of the steering wheel face.

• Outer Diameter: 80mm
• Inner Diameter: 51mm
• Bolt Hole Diameter: 0.65mm
• Fitment: 6 Bolt

直径 - 350毫米（13.78英寸）
- 碟形天线 - 70 毫米（2.76 英寸）
轮辋直径30毫米（1.18英寸）
- 辐条饰面 - 黑色
- 材质 - 优质皮革
- 颜色 - 黑色
- 螺丝 - 黑色
- 喇叭 - MOMO 60 周年纪念标志
- 缝线 - 红 / 白 / 绿
重量1.2千克（2.6磅）

2024 年，MOMO 将庆祝由 Giampiero Moretti 于 1964 年创立 60 周年，而 MOMO MOD.07 60 周年纪念版方向盘是适合这一场合的完美选择！

采用最优质的意大利黑色皮革制成，配有黑色镂空铝制辐条，右侧辐条上刻有金色“Anniversario”标志，底部辐条上刻有金色“MOMO”标志。

12 点钟位置装有优质黑色插件，方向盘采用意大利国旗的绿色、白色和红色手工十字绣，以庆祝所有 MOMO 方向盘继续 100% 意大利手工制作的热情。

该方向盘配有独特的黑色和金色 MOMO 喇叭按钮，带有特殊的 60 周年纪念标志。

对于希望拥有限量版方向盘的驾驶者来说，MOMO Mod.07 60 周年纪念版是终极选择。

100% 意大利手工制作。

请注意：本产品需要安装套件。

- Diameter - 350mm (13.78 in)
- Dish - 70mm (2.76 in)
- Rim Diameter - 30mm (1.18 in)
- Spoke Finish - Black
- Material - Premium Microfibre
- Colour - Black
- Screw - Black
- Horn - Matte Black MOMO Arrow
- Weight - 1.2 kg (2.6 lbs)



The MOMO MOD.07 Black Edition steering wheel is produced from the finest premium Italian black microfibre and features black cut-out aluminium spokes and a "Black Edition" logo laser etched on the right-hand spoke.

A premium black leather insert is fitted at the 12 o'clock position, and the steering wheel is hand cross-stitched.

This steering wheel is completed with a unique matt and gloss black MOMO Arrow horn button, the MOMO Mod.07 Black Edition is the ultimate choice for those wishing to retain the character of their vehicle whilst refreshing the interior.

100% handmade in Italy.

PLEASE NOTE: This product requires a fitting kit.

- Diameter - 350mm (13.78 in)
- Dish - 72mm (2.83 in)
- Rim Diameter - 26 x 25mm (1.02 x 0.98")
- Spoke Finish - Black
- Material - Mahogany Wood
- Colour - Zebrano
- Weight - 1.2 kg (2.6 lbs)

The MOMO MOD.07 Heritage steering wheel is produced from the finest premium Italian mahogany wood and features black cut-out aluminium spokes, with the stacked MOMO heritage logo CNC engraved and hand enamelled in yellow on the lower spoke. 

This steering wheel is completed with finger grooves on the rear, and a unique embossed brown cigar leather MOMO horn button, the MOMO Mod.07 Heritage is the ultimate choice for those wishing to retain the character of their vehicle whilst refreshing the interior.

100% handmade in Italy. 

PLEASE NOTE: This product requires a fitting kit. 

- Diameter - 350mm (13.78 in)
- Dish - 70mm (2.76 in)
- Rim Diameter - 30mm (1.18 in)
- Spoke Finish - Black
- Material - Leather
- Colour - Black
- Weight - 1.2 kg (2.6 lbs)



The MOMO MOD.07 steering wheel is designed for use in saloon and rally cars with the deep dish offering the driver maximum control and the yellow leather marker on the top providing a quick reference to the position of the steering. Finished in black leather, the steering wheel features 3 black aluminium spokes and the MOMO Italy logo on the horn button.

All MOMO racing steering wheels are produced in Italy to the highest quality with anticorodal aluminium frames. The suede or leather covering is glued to the rim, instead of being stitched, to provide a seamless finish for greater comfort and durability.

PLEASE NOTE: This product requires a fitting kit.

- Diameter - 350mm (13.78 in)
- Dish - 70mm (2.76 in)
- Rim Diameter - 30mm (1.18 in)
- Spoke Finish - Black
- Material - Suede
- Colour - Black
- Weight - 1.2 kg (2.6 lbs)



The MOMO MOD.07 steering wheel is designed for use in saloon and rally cars with the deep dish offering the driver maximum control and the yellow leather marker on the top providing a quick reference to the position of the steering.

Finished in either black suede or black leather, the steering wheel features 3 black aluminium spokes and the MOMO Italy logo on the horn button. All MOMO racing steering wheels are produced in Italy to the highest quality with anticorodal aluminium frames. The suede covering is glued to the rim, instead of being stitched, to provide a seamless finish for greater comfort and durability.

PLEASE NOTE: This product requires a fitting kit. 

MOMO Standard horn button 2 Contact - Embossed Black Leather Arrow



For the first time in history, an embossed leather horn button is now available from MOMO!

The MOMO Arrow Black Leather horn push has two electrical contacts enabling ease of fitment across all vehicles in today’s market.

Featuring a MOMO Arrow logo embossed into the premium black leather, 100% handmade in Italy. 

This Horn Button will fit all MOMO Steering Wheel Models, and must be used with the "Standard Profile" Retaining Ring (M22135311115). 

The MOMO Ultra Black Edition Steering Wheel is a sporty, dished wheel produced from the finest quality microfibre.



Featuring black leather quick reference position markers and some of the world’s most famous racing circuits lasered on the rim, this wheel was designed to provide that true race feel.

The MOMO Ultra steering wheel features black cut-out spokes with a laser etched sticker-bomb effect of the MOMO logo and an embossed gloss black MOMO logo on the right-hand spoke, with a contrasting MOMO Italy horn button in matte black.

Specification:

Dish: 90mm
Diameter: 350mm - 13.78"
Weight: 1.20kg - 2.65lb
Material: Premium Microfibre
Colour: Black
Horn: Black MOMO Italy
Screw: Black
Stitch: Black
Style: Tuning

PLEASE NOTE: This product requires a fitting kit.

The MOMO MOD.30 is a racing steering wheel designed for use in GT and saloon cars.



Specification:

Dish: 39mm (1.5")
Rim Diameter: 35 x 25mm (1.37 x 0.98")
Screw: Black
Spoke Finish: Black
Diameter: 320mm (12.59")
Material: Suede
Colour: Black
Weight: 0.9kg (1.98lb)


The flat bottom allows for easier access into the cockpit and a yellow leather marker at the top to provide the driver with a quick reference to the steering position. Finished in black suede, the steering wheel features black aluminium spokes, an anatomical grip for increased comfort, and the yellow MOMO logo in the centre.

All MOMO racing steering wheels are produced in Italy to the highest quality with anticorodal aluminium frames. The suede or leather covering is glued to the rim, instead of being stitched, to provide a seamless finish for greater comfort and durability.

Please Note: An aftermarket hub is required for installation. We recommend using one of our MOMO hub kits however other manufacturer's hubs may be suitable.

- Black leather
- Spoke Finish: Black
- Rim Diameter: 30 x 33mm (1.18 x 1.14 in)
- 350mm (13.78 in) Diameter



Designed to recreate the history of MOMO, the Prototipo Heritage is a classic-look wheel made in a combination of the finest modern materials giving it the perfect blend between old and new.

Produced from distressed leather with white stitching, and a choice of either black or silver cut-out spokes with the MOMO Heritage horn button, the MOMO Prototipo Heritage is the ultimate choice for those wishing to retain the character of their vehicle whilst refreshing the interior.

NFC: Advanced Technology for your steering wheel
When purchasing a product, quality and authenticity are essential and vital conditions
for every costumer. MOMO, always fighting against forgery and to safeguard "Made
in Italy" in the spring of 2021 introduced the advanced NFC (Near Field
Communication) technology for the first time ever in steering wheels by
applying it to its products making them capable of communicating with the buyer.

Thanks to NFC it will be possible to verify in real time the genuinity of a MOMO
steering wheel directly from your own compatible smart devices (smartphone, tablet,
smartwatch, etc) and you will also have access to exclusive contents, directly released
by MOMO, reserved to whom will register his own original MOMO steering wheel.

NFC technology's potential is enormous and constantly evolving, giving the possibility
to enrich the value and the features of the MOMO's steering wheel range.
NFC equipped steering wheels were be available on the market from spring 2021

VERIFIED BY MOMO
The chip, in most of the steering wheel's range,
is hidden in the right section in the back, near
the handle. The chip's detection is reached just
approaching the compatible device in proximity
of the mentioned area.
Every MOMO's steering wheel comes with a warning label,
in its packaging,with the user manual and the exact indication of
the chip's placement depending on the steering wheel model

PLEASE NOTE: This product requires a fitting kit.

MOMO Steering wheel PROTOTIPO



- Rim colour / material - Black / Leather
- Spoke colour / material - Black / Aluminium
- 370mm diameter
- Dish - 39mm diameter
- Stitch colour - White
- Screw colour - Black
- Weight - 1.5 kg

NFC: Advanced Technology for your steering wheel
When purchasing a product, quality and authenticity are essential and vital conditions
for every costumer. MOMO, always fighting against forgery and to safeguard "Made
in Italy" in the spring of 2021 introduced the advanced NFC (Near Field
Communication) technology for the first time ever in steering wheels by
applying it to its products making them capable of communicating with the buyer.

Thanks to NFC it will be possible to verify in real time the genuinity of a MOMO
steering wheel directly from your own compatible smart devices (smartphone, tablet,
smartwatch, etc) and you will also have access to exclusive contents, directly released
by MOMO, reserved to whom will register his own original MOMO steering wheel.

NFC technology's potential is enormous and constantly evolving, giving the possibility
to enrich the value and the features of the MOMO's steering wheel range.
NFC equipped steering wheels were be available on the market from spring 2021

VERIFIED BY MOMO
The chip, in most of the steering wheel's range,
is hidden in the right section in the back, near
the handle. The chip's detection is reached just
approaching the compatible device in proximity
of the mentioned area.
Every MOMO's steering wheel comes with a warning label,
in its packaging, with the user manual and the exact indication of
the chip's placement depending on the steering wheel model

MOMO Steering wheel PROTOTIPO.



- Rim colour / material - Black / Leather
- Spoke colour / material - Silver / Aluminium
- 370mm diameter
- Dish - 39mm diameter
- Stitch colour - White
- Screw colour - Black
- Weight - 1.5 kg

NFC: Advanced Technology for your steering wheel
When purchasing a product, quality and authenticity are essential and vital conditions
for every costumer. MOMO, always fighting against forgery and to safeguard "Made
in Italy" in the spring of 2021 introduced the advanced NFC (Near Field
Communication) technology for the first time ever in steering wheels by
applying it to its products making them capable of communicating with the buyer.

Thanks to NFC it will be possible to verify in real time the genuinity of a MOMO
steering wheel directly from your own compatible smart devices (smartphone, tablet,
smartwatch, etc) and you will also have access to exclusive contents, directly released
by MOMO, reserved to whom will register his own original MOMO steering wheel.

NFC technology's potential is enormous and constantly evolving, giving the possibility
to enrich the value and the features of the MOMO's steering wheel range.
NFC equipped steering wheels were be available on the market from spring 2021

VERIFIED BY MOMO
The chip, in most of the steering wheel's range,
is hidden in the right section in the back, near
the handle. The chip's detection is reached just
approaching the compatible device in proximity
of the mentioned area.
Every MOMO's steering wheel comes with a warning label,
in its packaging, with the user manual and the exact indication of
the chip's placement depending on the steering wheel model

- Black leather
- Spoke Finish: Carbon fibre
- Rim Diameter: 33 x 33mm (1.18 x 1.14 in)
- 350mm (13.78 in) Diameter



The Prototipo Carbon 6C is a classic-looking wheel with a modern twist.

Produced from the finest Italian leather and featuring carbon fibre covered cut-out spokes with the classic MOMO Arrow horn button, the MOMO Prototipo Carbon 6C is the ultimate choice for those wishing to retain the character of their vehicle whilst refreshing the interior.

NFC: Advanced Technology for your steering wheel
When purchasing a product, quality and authenticity are essential and vital conditions
for every costumer. MOMO, always fighting against forgery and to safeguard "Made
in Italy" in the spring of 2021 introduced the advanced NFC (Near Field
Communication) technology for the first time ever in steering wheels by
applying it to its products making them capable of communicating with the buyer.

Thanks to NFC it will be possible to verify in real time the genuinity of a MOMO
steering wheel directly from your own compatible smart devices (smartphone, tablet,
smartwatch, etc) and you will also have access to exclusive contents, directly released
by MOMO, reserved to whom will register his own original MOMO steering wheel.

NFC technology's potential is enormous and constantly evolving, giving the possibility
to enrich the value and the features of the MOMO's steering wheel range.
NFC equipped steering wheels were be available on the market from spring 2021

VERIFIED BY MOMO
The chip, in most of the steering wheel's range,
is hidden in the right section in the back, near
the handle. The chip's detection is reached just
approaching the compatible device in proximity
of the mentioned area.
Every MOMO's steering wheel comes with a warning label,
in its packaging,with the user manual and the exact indication of
the chip's placement depending on the steering wheel model

This product requires a fitting kit.
To buy one CLICK HERE

- Diameter - 350mm (13.78")
- Dish - 39mm
- Rim Diameter - 33 x 33mm (1.18 x 1.14")
- Spoke Finish - Black
- Material - Premium leather
- Colour - black
- Weight - 1.13kg (2.5lb)



𝗣𝗿𝗼𝘁𝗼𝘁𝗶𝗽𝗼 𝗕𝗟𝗔𝗖𝗞 𝗘𝗗𝗜𝗧𝗜𝗢𝗡

The MOMO Prototipo Black Edition is a classic-looking wheel with a modern twist.

Produced from the finest premium Italian leather and featuring black cut-out aluminium spokes and "Prototipo Black Edition" laser etched on the spokes.

This steering wheel is completed with a unique matt and gloss black MOMO Arrow horn button, the MOMO Prototipo Black Edition is the ultimate choice for those wishing to retain the character of their vehicle whilst refreshing the interior.

NFC: Advanced Technology for your steering wheel
When purchasing a product, quality and authenticity are essential and vital conditions
for every costumer. MOMO, always fighting against forgery and to safeguard "Made
in Italy" in the spring of 2021 introduced the advanced NFC (Near Field
Communication) technology for the first time ever in steering wheels by
applying it to its products making them capable of communicating with the buyer.

Thanks to NFC it will be possible to verify in real time the genuinity of a MOMO
steering wheel directly from your own compatible smart devices (smartphone, tablet,
smartwatch, etc) and you will also have access to exclusive contents, directly released
by MOMO, reserved to whom will register his own original MOMO steering wheel.

NFC technology's potential is enormous and constantly evolving, giving the possibility
to enrich the value and the features of the MOMO's steering wheel range.
NFC equipped steering wheels were be available on the market from spring 2021

VERIFIED BY MOMO
The chip, in most of the steering wheel's range,
is hidden in the right section in the back, near
the handle. The chip's detection is reached just
approaching the compatible device in proximity
of the mentioned area.
Every MOMO's steering wheel comes with a warning label,
in its packaging,with the user manual and the exact indication of
the chip's placement depending on the steering wheel model

PLEASE NOTE: This product requires a fitting kit.

- Black leather
- Spoke Finish: Silver
- Rim Diameter: 30 x 33mm (1.18 x 1.14 in)
- 350mm (13.78 in) Diameter



Designed to recreate the history of MOMO, the Prototipo Heritage is a classic-look wheel made in a combination of the finest modern materials giving it the perfect blend between old and new.

Produced from distressed leather with white stitching, and a choice of either black or silver cut-out spokes with the MOMO Heritage horn button, the MOMO Prototipo Heritage is the ultimate choice for those wishing to retain the character of their vehicle whilst refreshing the interior.

NFC: Advanced Technology for your steering wheel
When purchasing a product, quality and authenticity are essential and vital conditions
for every costumer. MOMO, always fighting against forgery and to safeguard "Made
in Italy" in the spring of 2021 introduced the advanced NFC (Near Field
Communication) technology for the first time ever in steering wheels by
applying it to its products making them capable of communicating with the buyer.

Thanks to NFC it will be possible to verify in real time the genuinity of a MOMO
steering wheel directly from your own compatible smart devices (smartphone, tablet,
smartwatch, etc) and you will also have access to exclusive contents, directly released
by MOMO, reserved to whom will register his own original MOMO steering wheel.

NFC technology's potential is enormous and constantly evolving, giving the possibility
to enrich the value and the features of the MOMO's steering wheel range.
NFC equipped steering wheels were be available on the market from spring 2021

VERIFIED BY MOMO
The chip, in most of the steering wheel's range,
is hidden in the right section in the back, near
the handle. The chip's detection is reached just
approaching the compatible device in proximity
of the mentioned area.
Every MOMO's steering wheel comes with a warning label,
in its packaging,with the user manual and the exact indication of
the chip's placement depending on the steering wheel model

PLEASE NOTE: This product requires a fitting kit.