高性能制动软管
制动液是汽车中最重要的液体之一,如果没有它,就不可能安全地停车。制动液将驾驶员踩在制动踏板上的力传递到车轮制动器上。
为了确保制动器完美运行,必须在检查或维护期间定期更换制动液,并使用正确的制动液测试仪进行测试。
每两年应更换一次刹车油。
DOT 等级越高,沸腾温度和湿沸点就越高。较高的 DOT 等级往往允许更长的维护间隔。DOT 标准基于美国运输部 (DOT) 的 FMVSS-116 标准。
沸点和粘度
干沸点- 描述密封的新制动液的特性。在这种状态下,制动液几乎无水(不含水的物质)。干沸点通常在 240 至 280°C 之间。
湿沸点- 确定制动液在其使用寿命结束时的特性,当含水量达到 3.5% 时,应更换制动液。此定义的湿沸点不得低于该值。
粘度——描述刹车液的流速。粘度越低,刹车液流经刹车系统的速度越快,刹车信号的传输速度也越快。
重要笔记
• 刹车油有毒,属于危险废物。
• 更换时要小心。液体会削弱油漆和塑料。
• 不得接触眼睛或皮肤。务必用水冲洗溢出的液体。
• 请勿将液体倒入饮用水中或与废油混合。
• 刹车液的颜色不能反映其质量。
• 制动液应存放在原包装中,并存放在干燥、阴凉且通风良好的地方。
点击此处了解 Textar 产品验证
DOT 4
Having an extremely high boiling point and lower viscosity than required, it meets and greatly exceeds regulatory standards. Also suitable for vehicles with ABS.
Vapour Lock formation
This sort of habit leaves room for the Vapour Lock, the formation of vapour bubbles due to boiling of the brake fluid that replace the normal fluid and are compressed, thereby sending the brake pedal to its fill stoke (spongy pedal). The origin is incident in the porosity of the tubes that make up the braking circuit, which in time draw moisture into the fluid, drastically reducing the boiling point. The result is a reduced braking efficiency.
Brembo Premium Brake Fluid
Brembo Premium brake fluids have a higher boiling point that exceeds the standard, thus offering superior resistance to the Vapour Lock and ensuring braking efficiency even at low temperatures. With high anti-corrosion properties and resistance to oxidation, Brembo brake fluid also allows for long-term unaltered chemical/physical characteristics of the fluid in operating circuit; therefore, preserving its integrity.
刹车液 DOT 4 LV(低粘度)Textar。
#文本#
Textar DOT 4 LV(低粘度)特别推荐用于配有 ESP、ABS 和 ASR 的车辆的液压制动器和离合器系统,它具有高沸点和在极低温度下出色的性能。
DOT 4 LV (低粘度)
干沸点≥260°C
湿沸点≥165℃
-40C 时粘度 < 750 mm2 /s
制动液是汽车中最重要的液体之一,如果没有它,就不可能安全地停车。制动液将驾驶员踩在制动踏板上的力传递到车轮制动器上。
为了确保制动器完美运行,必须在检查或维护期间定期更换制动液,并使用正确的制动液测试仪进行测试。
每两年应更换一次刹车油。
DOT 等级越高,沸腾温度和湿沸点就越高。较高的 DOT 等级往往允许更长的维护间隔。DOT 标准基于美国运输部 (DOT) 的 FMVSS-116 标准。
沸点和粘度
干沸点- 描述密封的新制动液的特性。在这种状态下,制动液几乎无水(不含水的物质)。干沸点通常在 240 至 280°C 之间。
湿沸点- 确定制动液在其使用寿命结束时的特性,当含水量达到 3.5% 时,应更换制动液。此定义的湿沸点不得降低。<
粘度——描述刹车液的流速。粘度越低,刹车液流经刹车系统的速度越快,刹车信号的传输速度也越快。
重要笔记
• 刹车油有毒,属于危险废物。
• 更换时要小心。液体会削弱油漆和塑料。
• 不得接触眼睛或皮肤。务必用水冲洗溢出的液体。
• 请勿将液体倒入饮用水中或与废油混合。
• 刹车液的颜色不能反映其质量。
• 制动液应存放在原包装中,并存放在干燥、阴凉且通风良好的地方。
点击此处了解 Textar 产品验证
#文本#
制动液是汽车中最重要的液体之一,如果没有它,就不可能安全地停车。制动液将驾驶员踩在制动踏板上的力传递到车轮制动器上。
为了确保制动器完美运行,必须在检查或维护期间定期更换制动液,并使用正确的制动液测试仪进行测试。
每两年应更换一次刹车油。
DOT 等级越高,沸腾温度和湿沸点就越高。较高的 DOT 等级往往允许更长的维护间隔。DOT 标准基于美国运输部 (DOT) 的 FMVSS-116 标准。
沸点和粘度
干沸点- 描述密封的新制动液的特性。在这种状态下,制动液几乎无水(不含水的物质)。干沸点通常在 240 至 280°C 之间。
湿沸点- 确定制动液在其使用寿命结束时的特性,当含水量达到 3.5% 时,应更换制动液。此定义的湿沸点不得低于该值。
粘度——描述刹车液的流速。粘度越低,刹车液流经刹车系统的速度越快,刹车信号的传输速度也越快。
重要笔记
• 刹车油有毒,属于危险废物。
• 更换时要小心。液体会削弱油漆和塑料。
• 不得接触眼睛或皮肤。务必用水冲洗溢出的液体。
• 请勿将液体倒入饮用水中或与废油混合。
• 刹车液的颜色不能反映其质量。
• 制动液应存放在原包装中,并存放在干燥、阴凉且通风良好的地方。
点击此处了解 Textar 产品验证
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
95002
您正在查看的产品与这些编号存在交叉引用关系
Sold as a set of 4
Fits:
Porsche 911 (996) GT3 1997-2005
High Performance Brake line race-bred street brake lines are constructed from the finest quality hose, consisting of a PTFE inner hose covered by braided stainless steel. Stainless steel brake lines provide a more responsive and firm brake pedal by eliminating the "spongy" feel that often accompanies stock rubber brake lines.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
SPR0190-4P
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
Sold as a set of 4
Fits:
Porsche 911 (996) 1998-04
Porsche 911 (996) GT3
Porsche 911 (996) Turbo
High Performance Brake line race-bred street brake lines are constructed from the finest quality hose, consisting of a PTFE inner hose covered by braided stainless steel. Stainless steel brake lines provide a more responsive and firm brake pedal by eliminating the "spongy" feel that often accompanies stock rubber brake lines.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
SPR0801-4P
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
Sold as a SET OF 4
Fits:
Porsche 911 (996)
Porsche Boxster 986
Porsche 911 (997)
Black Diamond hoses are made as close to oe specification as possible and many applications come complete with line locators using high specification hose with stainless steel over braid to hold the strength of the hose.
Using Black Diamond braided brake hoses will give you a superbly firm and controllable brake pedal action.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
DHK480
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
unique black plastic coating
Race proven technology for your road car
Fits
Porsche Boxster 986
Porsche 996
Porsche 997
Porsche GT3 1999-2011
Porsche 996 turbo
Porsche 997 turbo - Gen 1 and Gen 2
Performance brake hoses that are approved for road use, utilising the same hose & fitting technology used by race teams so have vastly improved pedal feel with a shorter, firmer brake pedal feel
Supplied with a unique jet-black finish, these are plated for increased life and undoubtedly look smart & professional with any caliper or wheel colour combination
Have a greater resistance to corrosion due to unique, plated stainless fittings with no age related performance drop-off
These hoses are easy to clean due to the black plastic coating and are compatible with DOT 3,4 and 5 brake fluids
Suitable for all ABS and non-ABS braking systems these hoses are probably the least expensive performance upgrade you can make and are especially effective at improved braking performance on older models
Conform to TUV / DOT and FMVSS106 certification
These hoses features a PTFE liner with stainless steel braid and are pressure tested to 200 bar
The fittings are high-grade stainless steel (303/304 grade) with a plated black coating
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
BRAKELINEKIT
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
Goodridge 不锈钢编织刹车线
Design911 全系列高性能保时捷 Goodridge 刹车线的库存商和经销商。 Goodridge 不锈钢编织刹车线已成为需要终极制动的专业赛车运动的标准。没有体积膨胀的空间,也没有橡胶刹车线造成的“糊状刹车”。
高效的制动系统可让您更快地进入弯道并加速加速。此外,当 G-Stop/Brakeline 套件制动软管与 ABS 制动系统一起使用时,它们几乎消除了制动踏板的“颤动”并显着缩短了制动距离。
- 刹车片及制动盘组件
- 标准制动盘
- 标准刹车片
- SPORTS 系列制动盘
- Brembo 标准制动器
- Brembo 赛车制动器
- TEXTAR 制动器
- PAGID 赛车制动器
- Zimmermann 制动器
- 高性能摩擦制动器
- Giro 开槽制动盘
- EBC 制动器
- O 型制动器制动盘
- Rotinger 石墨系列
- 陶瓷制动盘替换件
- 刹车片减震垫片
- 制动钳螺栓/制动盘螺钉
- 销钉套件及导板
- 标准制动软管
- 制动钳和制动管路
- 制动钳
- 制动钳升级版
- 手刹蹄片
- 手刹线
- 制动盘盖板
- ABS | 速度传感器
- 制动钳密封件 | 活塞
- 制动伺服装置 | 助力器
- 制动主缸
- 制动液贮存箱
- 制动液
- 中央锁止轮毂
- 钛制刹车片防护罩
- 风管扰流板/导气罩
- 自制制动器套件