Engine Modifications & Upgrades

Additional rear main no. 8 bearing seal and housing.



Fits:
Porsche 986/987 Boxster 1997-2009
Porsche 996/997 1997-2009



Our team of technicians has developed a Rear Main Seal that corrects the notorious rear main oil leaks on the m96 and m97 engines. It has been developed to solve the twisting of the last journal of the crank shaft, reducing engine vibration and extending engine life. Prevent engine failure, by replacing your factory rear main seal with our upgraded rear main bearing seal and housing.

Features:
• prevents crank warping
• decreases engine vibrations
• prevents piston rod #6 failure
• extends engine life

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

996986REAREPS

您正在查看的产品与这些编号存在交叉引用关系

铝制进气歧管。保时捷 996 Carrera 3.4L / 3.6L IPD



适合：
保时捷 保时捷 996 Carrera C2 3.6L
保时捷 保时捷 996 Carrera C4 3.6L
保时捷 保时捷 996 Carrera C2 3.4L*
保时捷 保时捷 996 Carrera C4 3.4L*
（*适用于配备“电子加速器 (M620)”的汽车，不适用于早期的线控油门汽车）

适合：
保时捷 997 GEN1 3.6L
保时捷 997 GEN1 3.8LS

996 并非保时捷新篇章的开始，而是保时捷新书的开始。多产的 911 经过洗礼，并采用水冷发动机，而传奇的风冷发动机则留在了保时捷的历史中。

911 发动机经过全面重新设计，配备了保时捷自 911 早期以来一直使用的老式塑料“T”型空气分配器。在 2009 年 DFI 汽车问世之前，几乎所有 911 Carrera 都配备了这种进气系统。

IPD 增压室的独特、创新和专利设计采用“Y”形设计，通过更有效地将空气左右引导至气缸组来提高性能。这种设计减少了气流湍流并增加了气流速度，从而在整个转速范围内显著提高功率。

IPD 增压器不仅能显著提高功率和扭矩，还能创造更线性的功率和扭矩带。Tiptronic 客户甚至声称在安装 IPD 增压器后，换挡更加积极，性能得到了显著改善。

就像 Carrera S 一样，很难为自然吸气的 3.4L Carrera 找到动力，但 IPD Plenum 在这方面的表现比任何其他售后改装都要好。这种简单的螺栓性能升级用 IPD 专利的铝制“Y”型 Plenum 取代了工厂塑料空气分配器。

IPD Plenum 通过更卓越、更高效的设计，将马力提升了 25 倍，扭矩提升了 22 倍。这些提升主要体现在最需要和最享受的中档，但性能改进在整个转速范围内都得以实现。如此令人印象深刻的性能改进将真正改变您的保时捷驾驶体验。

这些在中间范围内增加的功率增益创建了更线性的功率曲线，有助于最大限度地减少工厂曲线中通常出现的功率下降，从而显着提高性能。

996 Plenum 安装是直接螺栓固定 R & R（拆卸和重新安装）程序。对于机械倾向 DIY 客户来说，安装相对简单，但 IPD 强烈建议所有 Plenum 安装都由经过培训且合格的保时捷技术人员进行。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

97174

您正在查看的产品与这些编号存在交叉引用关系

铝制进气歧管竞赛版 82MM



适合：
保时捷 保时捷 996 Carrera C2 3.6L
保时捷 保时捷 996 Carrera C4 3.6L
保时捷 保时捷 996 Carrera C2 3.4L*
保时捷 保时捷 996 Carrera C4 3.4L*
（*适用于配备“电子加速器 (M620)”的汽车，不适用于早期的线控油门汽车）

保时捷 997 3.8LS
保时捷 997 3.6L

几十年来，保时捷一直通过限制进气道来控制发动机输出。通过使用较小的节气门体，这一方法已成功实现。这种简单的功率控制解决方案是一种非常有效的方法，可以防止低级车型超越某些旗舰车型，尤其是拥有丰富赛车血统的车型。虽然工厂发动机套件是性能出色的机器，但它们的设计和开发是为了实现特定的性能数字，以满足目标人群并与竞争对手品牌竞争。不幸的是，追求更高保时捷驾驶体验的驾驶爱好者需要的性能水平远远超出目标市场。

所有 IPD 增压室都提供显著的功率和扭矩增益，但与更大的节气门体结合使用时，它们的性能会更好。所有 IPD“竞赛”增压室都使用保时捷提供的第二大尺寸节气门体。在这种情况下，Competition Carrera 将工厂 OE 74 毫米节气门体升级为保时捷的 82 毫米 997 GT3 节气门体。我们所有的竞赛增压室都设计用于配备高性能排气系统的汽车。排气系统（集管、排气管和消声器）越广泛越好。优化进气和排气可以创造一个平衡的性能包，使发动机吸入和呼出更多的空气，从而产生更大的功率和扭矩。

IPD 率先采用了另一种新的增压室设计，即竞赛版 Carrera 增压室。我们独特而创新的内部合并收集器区域进一步增强了层流和容积效率。这种全新的方法不仅带来了巨大的性能提升，而且带来了更线性的功率输出和更好的油门响应。增益取决于预先存在的改装和安装的售后排气质量。我们所有人都“应该”知道，随着我们爬上所谓的性能阶梯，马力和扭矩变得越来越难找到，而且通常更昂贵。话虽如此，性能组件根据安装顺序产生不同的功率增益。IPD 会在原厂车上测试和评估所有产品，这建立了一个公平的竞争环境和更好的“同类”比较。然而，竞赛版 Carrera 增压室旨在与已经经过中度到重度改装的应用程序配合使用。功率增益会因每辆 Carrera 而异，但最重要的是，会有明显而令人印象深刻的增益，这一定会让任何保时捷 Carrera 驾驶爱好者满意。

一旦工厂 ECU/DME 满足所有必要的“适应”要求，功率改进将完全实现。可以通过一系列“硬拉”或全油门加速来加速这一过程。当然，这只能在封闭的赛道上进行。

需要升级工厂 74 毫米 TB 和 997 GT3 82 毫米油门体

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

97182

您正在查看的产品与这些编号存在交叉引用关系

Brey Krause Deep Sump Kit.

 

For Boxster 986, 987 and 996, 997 Non-Turbo Models through 2008

Scavenging and aeration in the oil pan have been identified as a problem in 996/997, Boxster, and Cayman models experiencing high G-forces on the racetrack. The R-9095 oil pan spacer provides a simple solution. This spacer increases sump capacity by half a quart, providing more reserve to ward off starvation. The R-9095 is approved by the Porsche Club of America for use in PCA club racing Stock and Prepared class cars. The R-9095 kit clears all factory options including the rear skid plate. Added oil capacities as well as increased oil pan surface area increase oil cooling and engine performance.

*Note: Oil pan and sump baffle are OEM parts and do not need to be purchased. Baffle spacer and pick-up tube spacer are included in this kit.

Material: 6061 T6 Aluminum Alloy
Finish: Clear Anodized
Weight: N/A
Models: Boxster, Boxster S, 996/997 models (excludes GT3 and turbocharged models) and Cayman through 2008.
Installation: For best results internal baffle passages should be modified. Modification instructions included in the kit.
Miscellaneous: Spacer adds .5 U.S. quarts to oil pan volume and improves internal baffling system. Extension bolts, baffle spacer and pick-up tube spacer included in the kit.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

R-9095

您正在查看的产品与这些编号存在交叉引用关系

Fabspeed's Carbon Fiber Competition Intake System installed on a Porsche 997 Carrera.



Improves cold air induction into the engine and improves power and sound through the rev range; constructed with genuine carbon fiber for strength and durability.

FEATURES:
• Fits all Porsche 997 Carrera vehicles 2005-2008
• Improves power by 19 whp and 21 ft-lbs of torque at 7000rpm
• Includes dual dry-style air filters which do not require oiling; filter wash kit available separately
• Intake constructed from genuine carbon fiber
• Direct bolt-on replacement for the factory air box
• All Fabspeed performance products are backed by the Fabspeed Lifetime Limited Warranty

NOTE: Optional GT3 Throttle Body Adapter only required for vehicles that have been upgraded to the 997 GT3 82mm Throttle Body.

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

FSPOR997COMPAI

您正在查看的产品与这些编号存在交叉引用关系

2 Quart (1.89 Litre) Deep Sump Track Oil Pan Kit.
Models: Boxster, Cayman, 996 and 997 models (excludes GT3 and turbocharged models).



This kit is best used on track only vehicles as ground clearance will become an issue due to the extension.

Scavenging and aeration in the oil pan have been identified as a problem in the 996, 997 and Boxster models that experience high G-forces on the racetrack. Motorsports 2 Quart Deep Sump Oil Pan Kit for all 986/996/987/997 Porsche's (excluding GT3, GT2 Turbo and DFI models). This deep sump kit is an extension added to the original oil pan, increasing oil capacity by 2 quarts, helping with oil starvation problems these vehicles commonly have.

Kit Includes:
- 2Quart Pan Extension
- Oil pickup spacer
- Extended Hexagon Head Bolts (x15)
- Aluminium spacers for baffle (x3)
- Stainless oil trap
Please order extra
1 x 703141410 Reinzosil Universal Sealing Compound
2 x 99710701600 Oil tubes

Fits:
Porsche Boxster 986 / 987
Porsche 996
Porsche 997
Porsche Cayman
Please note: This kit will not fit 996 Turbo / 996 GT2 / 996 GT3 / 997 Turbo / 997 GT2 / 997 GT3

For Installation Instructions CLICK HERE

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

996107032XX

您正在查看的产品与这些编号存在交叉引用关系

Performance engine mounts (PAIR). Included two M12 x 1.75 Nuts



Separate inserts available for varying densities
Shore ratings 65A Street (available separately)
Shore ratings 75A Fast Road (included in engine mounts)
Shore ratings 85A Track (available separately)

Fits:
Porsche 964 C2 / C4 / RS / Turbo
Porsche 993 C2 / C4 / RS / Turbo
Porsche 996 C2, C4, C4S, Turbo, GT2, GT3
Porsche 997 C2, C2s, C4, C4s, Turbo, GT2, GT3

Please note: the threads needs to be treated with loctite before installation (not sold with the product).

Replacing your factory engine mounts with these performance semi-solid mounts will dramatically decrease engine movement which then will result in better acceleration and handling of your Porsche.

CNC machined mounts with PU bushes are absolute must have for any car on track or on the street. Very easy to replace by experienced DIYers.

For 911 & Porsche world article / fitment guide pdf please CLICK HERE

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3609309625

您正在查看的产品与这些编号存在交叉引用关系

Tuneable Semi-Solid Engine Mount.
SET OF 2 Includes three pairs of inserts in varying densities

 

Fits:
Porsche 964/993/996/997

The Rennline Tune-able Engine Mount for the 964, 993, 996, and 997 offers the ultimate in adjust ability for your car. Replacing your compliant factory mounts will decrease engine movement resulting in better acceleration, handling and significantly increased shifter feel. This is the ultimate solution for almost any car, and allows you to tune our mounts for the way you drive. Our mounts are CNC machined from billet aluminium and include three pairs of inserts in varying densities. Tune your mounts by using the softer inserts to reduce engine slop and avoid missed shifts in your street car, or utilise the stiffest inserts to get the most from a more focused track car. You can even mix and match, giving you 9 possible combinations to let you dial in our mount to your specifications. Here at Rennline we know you want your Porsche to be flawless, and that is why we are Driven to Improve Excellence.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

M18

您正在查看的产品与这些编号存在交叉引用关系

RSS Performance engine mounts (PAIR).



Fits:

Porsche 996 C2, C4, C4S, Turbo, GT2, GT3
Porsche 997 C2, C2s, C4, C4s, Turbo, GT2, GT3

With factory hydraulic engine mounts, the drive train will move independent of the chassis during acceleration and cornering loads. This movement can upset the balance of the vehicle and create negative handling effects.

RSS Tarmac Series Performance Engine Mounts minimise these effects by utilising specialised polyurethane bushings which offer a firmer, more direct driving feel with optimum feedback. This upgrade will not adversely effect ride quality or cause knock sensor issues commonly associated with solid engine mounts.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

624

您正在查看的产品与这些编号存在交叉引用关系

Rennline Solid Motor / Engine Mounts Pair. ALUMINIUM.
SET OF 2



Fits:
Porsche 964
Porsche 993
Porsche 996
Porsche 997

Solid engine mounts are a smart upgrade to any track or aggressive street car, and were installed on Porsche factory race cars. Stock mounts are made of compliant rubber, and contribute to imprecise shifting and inferior throttle response. Solid mounts create slightly more interior vibration than rubber mounts, but securely connect the engine and transmission assembly to the car's unibody, creating a crisper throttle response and shifter feel. Rennline's solid mounts are CNC machined from 6061 aluminum for strength and light weight, and come as a pair with new Grade 8 mounting hardware. Sold as a set of (2)

Motorsport Product

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

M08

您正在查看的产品与这些编号存在交叉引用关系

Engine mount bush kit
Shore rating 65A for 3609309625 performance engine mounts



Fits:
Porsche 996 C2, C4, C4S, Turbo, GT2, GT3
Porsche 997 C2, C2s, C4, C4s, Turbo, GT2, GT3

Shore ratings 65A Street
Shore ratings 75A Fast Road (including in engine mounts)
Shore ratings 85A Track


For 911 & Porsche world article / fitment guide pdf please CLICK HERE

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3609309665

您正在查看的产品与这些编号存在交叉引用关系

Engine mount bush kit
Shore rating 85A for 3609309625 performance engine mounts



Fits:
Porsche 996 C2, C4, C4S, Turbo, GT2, GT3
Porsche 997 C2, C2s, C4, C4s, Turbo, GT2, GT3

Shore ratings 65A Street
Shore ratings 75A Fast Road (including in engine mounts)
Shore ratings 85A Track


For 911 & Porsche world article / fitment guide pdf please CLICK HERE

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3609309685

您正在查看的产品与这些编号存在交叉引用关系

Harmonically damped underdrive pulley. Dampens/reduces internal engine harmonics for improved engine performance, efficiency and longevity. 
replacement for OE 99710224101


Fits on all Porsche 986, 996, 987, 997 models EXCEPT 2.9L (multi hole crank pulley pattern), DFI engines, GT2, GT3 and Turbo.

Increase your engine output by reducing the draw of the engine's ancillaries ie the power steering pump, Air Conditioning, water pump and alternator by slowing them down and reducing the horsepower they use.

Underdrive pulley is one of the cheapest returns for the money spent when it comes to actual performance and horsepower gains for track and street use cars.

Installation tool (wrench) included, new OEM crankshaft pulley bolt is recommended but not included with this product.

Please add Drive Belt for Under Drive Pully cars WITH Aircon Porsche 996/ Boxster 986/997 99610215199/1

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3609001608

您正在查看的产品与这些编号存在交叉引用关系

HPDE 2 Quart Accusump Universal Kit.

Fits:
Porsche 986 Boxster 1997-04
Porsche 996 Carrera 1998-04
Porsche 987 Boxster 2005-08
Porsche 987 Cayman 2005-08
Porsche 997 2005-08

The Accusump is designed collect pressurized oil from your engine and store it so it may be discharged later during low oil pressure surges to protect against engine damage during demanding racing conditions. After the oil pressure stabilizes, the piston inside the Accusump moves back and forth, pressurizing the Accusump until it equalizes with engine's oil pressure. The Electric Pressure Control Valve we use is for a discharge/refill of 35-40 PSI. These valves have the convenience of an electric valve for remote mounted units on daily drivers but with the rapid refill rate of a manual valve as required in racing. The E.P.C. valving will only allow the Accusump to discharge oil when the engine's oil pressure drops below a predetermined level and only refill when the pressure rises above that level.

The LN Engineering HPDE Accusump kit is easy to install, requiring plumbing of only a single oil line. Our universal Accusump kit has everything you need to carry out a custom Accusump installation in your Boxster, Cayman, or 911, sans wiring or electrical pieces and includes a two quart Marine Accusump system including LN Engineering's Spin-On Full-Flow Oil Filter Adapter, single input sandwich adapter (for easy one-line installation - fits between filter and LN spin on filter adapter), the LN Engineering Billet Washable High Performance Oil Filter, 45 psi electronic valve, hose, and fittings. In conjunction with the installation of an Accusump, we recommend adding an X51 oil baffle and 997 oil return tubes for improved oil control and ensure scavenge oil is returned to the sump as quickly as possible. For installation support and for troubleshooting technical issues with your Accusump, please contact Canton directly.

NO WARRANTY, RETURNS, OR EXCHANGES ON ACCUSUMP KITS!

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

106-12.1

您正在查看的产品与这些编号存在交叉引用关系

IMS Intermediate Shaft Bearing Upgrade Eternal Fix -58MM FLANGE - OPEN ENGINES (while doing an engine rebuild)



Fits:
Porsche 997 2005-08
Porsche Boxster 987
Porsche Cayman 987
(Not for M96 Engines)

Porsche Ims Intermediate Shaft Bearing Upgrade - Eternal Fix with Oil Pressure Feed - 58 MM - Open Engine Permanently Fix Your Intermediate Shaft With The Eternal Fix! Unlike Failure Prone Ball Bearings, Eps Uses A Patented Cylindrical Bearing With Thrust Control.
Prevent future catastrophic engine failure permanently with the only true Eternal Fix for the notorious Porsche intermediate shaft bearing. Unlike the other failure-prone ball bearing products that the original IMS and other upgrades on the market use, EPS uses a patented cylindrical bearing with thrust control that can be pressed directly into the back of the engine without disassembly. The cylindrical bearings have over 12 times the load capacity of other ball bearing solutions making the EPS IMS bearing the clear choice. Backed by a full 5-year warranty and includes an oil feed modification kit. Order yours today!

WHAT MAKES OUR SOLUTION DIFFERENT?

Roller bearings are not intended for carrying large axial loads. Similar to failure-prone ball bearings, when cylindrical roller bearings are used for thrust control, the roller becomes compromised due to the limited surface contact area on the sides of the rollers. The results of using a cylindrical bearing for thrust control will be similar to all other ball bearing solutions.

In our patented system, we use a 15mm cylindrical bearing with thrust control that allows for the separation of the axial load from the radial load. Our roller bearings do NOT carry the axis load (thrust control) on the side, which leaves the roller free to carry only the radial load (main load). The axial load is carried exclusively on the entire permitter of the outer race. This results in a bearing that is not overloaded and will last the lifetime of the engine.

EPS recommends using this product in conjunction to the Rear Main #8 Seal and Housing

IMS Intermediate Shaft Bearing Upgrade Eternal Fix -62MM FLANGE - CLOSED ENGINES (MUST USE OUR BORING TOOL IN ORDER TO INSTALL)
the boring tool can be purchased or rented from us
Code: 987997IMSTOOL

Fits:
Porsche 997 2005-08
Porsche Boxster 987
Porsche Cayman 987
(Not for M96 Engines)

Porsche Ims Intermediate Shaft Bearing Upgrade - Eternal Fix with Oil Pressure Feed - 62 MM - Closed Engine Permanently Fix Your Intermediate Shaft With The Eternal Fix! Unlike Failure Prone Ball Bearings, Eps Uses A Patented Cylindrical Bearing With Thrust Control.
Prevent future catastrophic engine failure permanently with the only true Eternal Fix for the notorious Porsche intermediate shaft bearing. Unlike the other failure-prone ball bearing products that the original IMS and other upgrades on the market use, EPS uses a patented cylindrical bearing with thrust control that can be pressed directly into the back of the engine without disassembly. The cylindrical bearings have over 12 times the load capacity of other ball bearing solutions making the EPS IMS bearing the clear choice. Backed by a full 5-year warranty and includes an oil feed modification kit. Order yours today!

WHAT MAKES OUR SOLUTION DIFFERENT?

Roller bearings are not intended for carrying large axial loads. Similar to failure-prone ball bearings, when cylindrical roller bearings are used for thrust control, the roller becomes compromised due to the limited surface contact area on the sides of the rollers. The results of using a cylindrical bearing for thrust control will be similar to all other ball bearing solutions.

In our patented system, we use a 15mm cylindrical bearing with thrust control that allows for the separation of the axial load from the radial load. Our roller bearings do NOT carry the axis load (thrust control) on the side, which leaves the roller free to carry only the radial load (main load). The axial load is carried exclusively on the entire permitter of the outer race. This results in a bearing that is not overloaded and will last the lifetime of the engine.

EPS recommends using this product in conjunction to the Rear Main #8 Seal and Housing

中间轴 (IMS) 轴承套件 - 适用于保时捷

8102 专为快速安全地拆卸和更换 M96 和 M97 发动机上的保时捷 IMS（中间轴）轴承而开发，该发动机适用于 1999 年至 2008 年所有水冷 911、Boxster 和 Cayman 车型。配有凸轮轴和曲轴正时工具。

保时捷应用：911，Boxster，开曼（1999 - 2008）。
发动机代号应用包括：M96、M97。
套件包括适用于早期和晚期发动机的凸轮轴和曲轴锁定工具。
提供了 2 种拆卸轴承的方法。按照 OEM 说明安装轴承。
谢菲尔德制造。重要提示：使用前确保力螺钉已用二硫化钼润滑脂充分润滑。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

8102

您正在查看的产品与这些编号存在交叉引用关系

IMS Intermediate Shaft Bearing Upgrade. Eternal Fix
for M96 Engines and Early M97.01

Fits:
Porsche 996 C2 3.4L 1998 - 2001
Porsche 996 C2 3.6L 2002 - 2004
Porsche 996 C4 3.4L 1999>>
Porsche 996 C4 3.6L 2000>>
Porsche 996 C4 3.4L 2001>>
Porsche 996 C4 3.6L 2002 - 2004
Porsche 996 C4S 3.6L 2002- 2005

Porsche 997 C2 3.6L 2005 M96.05
Porsche 997 C2S 3.8L 2005 M97.01**
Porsche 997 C4 3.6L 2005 M96.05
Porsche 997 C4S 3.8L 2005 M97.01**
**Engine (3.8) number up to M97/01 68509790 has the older IMS bearing (this product fits) and Engine number from M97/01 68509791 has the larger revised IMS. (this product does not fit)

Porsche Boxster 986 2.5L 1997 - 1999
Porsche Boxster 986 2.7L 2000 - 2003
Porsche Boxster 986 2.7L 2004 - 2005
Porsche Boxster S 986 3.2L 2000 - 2005
Porsche Boxster 987 2.7L / 3.2L / 3.4L

**M96 Engine only 

Fits engine types: Carrera 996 M96 engines, Boxster 986 M96 Engines, Boxster 987 M96 Engines, Carrera 997 M96 & M97.01 **Engine (3.8) number up to M97/01 68509790 has the older IMS bearing (this product fits) and Engine number from M97/01 68509791 has the larger revised IMS. (this product does not fit)

IMS Eternal Fix retro fit kit installs in-car without removal or disassembly of the engine required. The Cylindrical Bearing with Thrust Control design has a load capacity 5 times greater than the inferior, failure prone, Ball Bearing solutions on the market!

Why Cylindrical is Best?
Cylindrical Bearings have very high load bearing capacity, 5 times more than Ball Bearing. Cylindrical Bearings are used in, High Temp & Low Viscosity Lubrication such as Automatic Transmissions. They can carry extreme lateral pressure without wear to the friction surfaces. This is because the bearing friction surface is flat not concave.

For More Information CLICK HERE

For Installation Instructions CLICK HERE

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99610590102EPS

您正在查看的产品与这些编号存在交叉引用关系

IMS Tool Kit by EPS



Bearing puller and adapter for extracting the existing bearing from the original center stud/bearing support (shown above)
Bearing driver tool to allow easy installation of the new bearing (shown above)
"Easy Out" adapter to allow extraction of bearing using the EPS bearing puller when and if the center stud/bearing support is broken or breaks during extraction
Crankshaft Pully TDC Lock Pin to secure the engine at the proper position to do an IMS Retrofit
Camshaft locks for both early 5-chain and later 3-chain engines (kit includes one ea.)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99610590102TOOL

您正在查看的产品与这些编号存在交叉引用关系

Magnetic oil drain plug, with a seal ring (washer).
Hard Anodized Aluminum, with magnet, 18 x 1.5mm



Fits:
Porsche 996 1997-04
Porsche 997 2005-08
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005-08
Porsche 987C Cayman 2005-08

A magnetic sump oil drain plug is a type of oil drain plug that contains a small magnet designed to attract and capture metallic particles that may be present in your engine's oil. While this type of drain plug is not exclusive to Porsche and can be used in various vehicles, it can provide several benefits, including:

Improved Engine Longevity: The magnet in the drain plug helps to capture tiny metal particles, such as iron, steel, or aluminum, that may circulate in the engine oil. Removing these particles can reduce wear and tear on engine components, potentially extending the engine's lifespan.

Enhanced Engine Performance: By reducing the presence of contaminants in the oil, a magnetic drain plug can help maintain the oil's lubricating properties, which is crucial for smooth engine operation. Clean oil can also contribute to improved fuel efficiency.

Early Detection of Problems: As the magnetic drain plug collects metallic debris, it can serve as an early warning system. By inspecting the drain plug during oil changes, you can get an idea of the engine's condition and detect any unusual wear or damage before it becomes a major issue.

Reduced Maintenance Costs: Regularly inspecting and cleaning a magnetic drain plug can prevent larger issues from developing over time. Addressing potential problems early can save you money on more extensive repairs down the road.

Peace of Mind: Knowing that you are taking steps to protect your engine from premature wear and tear can give you peace of mind as a vehicle owner. It's a relatively inexpensive and simple modification that can provide added assurance.

Easy Installation: Magnetic drain plugs are typically straightforward to install. They often replace the existing drain plug and require no special tools or modifications.

While magnetic drain plugs can offer these benefits, it's essential to remember that they are not a substitute for regular oil changes and proper maintenance. Regular oil changes with the appropriate oil and filter are still crucial for the health and longevity of your engine. Additionally, magnetic drain plugs may not capture all types of contaminants, so they should be seen as a supplementary measure rather than a comprehensive solution.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90021900930

您正在查看的产品与这些编号存在交叉引用关系

旋装式机油滤清器

适合：

保时捷 986/987 以及 996/997 车型，可替换保时捷零件号 996 107 020 53（54、55）。适用于发动机型号为 M96 或 M97 的 MY97-08 车辆。
不适合 GT2、GT3 或 Turbo 型号或任何风冷型号。仅针对配备 M96/M97 发动机的 MY97-08 车辆设计。

保时捷 987.2 MY09+ Boxster 和 Cayman 车型

保时捷 955 Cayenne S V8 和 955 Cayenne Turbo MY03-06

Oil Filter Spin-on Type (Short type)

Fits:

Porsche 986/987 as well as 996/997 models and replaces Porsche part numbers 996 107 020 53 (54, 55). For MY97-08 vehicles with M96 or M97 engine designation.
Does not fit GT2, GT3, or Turbo models or any aircooled models. Design only for MY97-08 vehicles with an M96/M97 engine.

Porsche 987.2 MY09+ Boxster and Cayman models

Porsche 955 Cayenne S V8 and 955 Cayenne Turbo MY03-06

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

OC1051

您正在查看的产品与这些编号存在交叉引用关系

油底壳挡板套件 X51 动力套件风格。



适合
保时捷 986 Boxster
保时捷 987 Gen 1 Boxster / Cayman - >>2008 年

保时捷 996 Carrera 2 / Carrera 4 / Carrera 4S
保时捷 997 Gen 1 Carrera 2 / Carrera S / Carrera 4 / Carrera 4S - >>2008 年

EBS Racing X51 款 M96/M97 油底壳挡板套件与标准油底壳（无深油底壳延伸）配合使用，是一款重型全金属结构油底壳挡板，适用于 2008 年款之前的所有 Boxster、996 和 997 发动机，涡轮增压和 GT3 车型除外。

这款 CAD 设计和精密制造的油系统增强组件可在运动驾驶过程中将更多的油保持在应在的位置；在皮卡周围。为了从第一天起就保持稳定的性能，我们使用了不会像工厂那样变质或弯曲的金属门。EBS油挡板组件可轻松安装在任何工厂油底壳上，并附带硬件和安装说明，便于安装。

套件包括
EBS Racing M96/97 油挡板组件
LC5900密封胶
6x10mm 锯齿法兰螺栓 - x3

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

106-00.6

您正在查看的产品与这些编号存在交叉引用关系

Outright IMS Boring Tool for Installing IMS Bearing



This boring tool can be also be rented from us
for installing our 62mm IMS kit Code: 987997IMS62MM. For rental please see other listings.

When you purchase this product you will be supplied with brand new set of tools that haven't been used on any jobs.
We will not accept a return of this part if we find out that it is in used condition.


For IMS Boring Tool instructions please CLICK HERE

Rental IMS Boring Tool for Installing IMS Bearing



This boring tool can be purchased or rented from us
for installing our 62mm IMS kit Code: 987997IMS62MM

Costs
The boring tool cost will be refunded once the tool is returned to us and checked. The boring tool can also be purchased outright for £1895.00

For IMS Boring Tool instructions please CLICK HERE

Underdrive pulley.
replacement for OE 99710224101



Fits on all Porsche 986, 996, 987, 997 models EXCEPT 2.9L (multi hole crank pulley pattern), DFI engines, GT2, GT3 and Turbo.

The RSS Harmonically Damped Underdrive Pulley is ideal for engines that are running light weight flywheels, engines that are built - bored/stroked and engines that are driven hard.

• Offers improved HP & TQ by reducing drag from the power steering pump, A/C, water pump and alternator without detrimental effects on said ancillary systems.
• Dampens/reduces internal engine harmonics for improved engine performance, efficiency and longevity.
• Recommended for street or track use

Installation tool (wrench) and new OEM Pulley Washer included:

Dyno Image shows HP & TQ gain on 2005 997.1 Carrera S:
Baseline Dyno Run Mods: OEM Crank Pulley, OEM Software, Cargraphic Headers, Hi flow 200 Cell Cats, and Medium Sound Cargraphic Sport Mufflers
Modified Dyno Run: Added RSS Pulley (Part #608) to baseline car with existing mods:
+16 HP / +8 ft lbs TQ

*** NOTE: We recommend using/sourcing a new OEM Crank Shaft Pulley Bolt for your specific vehicle when installing the RSS Pulley. (Not Included with 608 Kit)
Please add Drive Belt for Under Drive Pully cars WITH Aircon Porsche 996/ Boxster 986/997 99610215199/1

MADE IN USA

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

608

您正在查看的产品与这些编号存在交叉引用关系

Spin on oil filter adapter for MY97-08 engines.
Requires K&N filter HP-1007

Fits:

Porsche engines between years 1997-2008

TRS Backflow Preventer (BFP) Remote Filter Adapter with integrated check valve & fittings.

Fitment:
Porsche 986 Boxster / Boxster S 1997 – 2004
Porsche 987 Boxster / Boxster S 2005 – 2008
Porsche 987C Cayman / Cayman S 2006 – 2008
Porsche 996 (911) Carrera / Carrera 4S 1998 – 2004
Porsche 997 (911) Carrera / Carrera S / Carrera 4S 2005 – 2008


PATENT PENDING. MADE IN U.S.A.

More and more we hear about connecting rod bearings seizing or cylinders becoming scored and destroying Porsche M96 and M97 engines. This all has to do with poor lubrication on banking and high speed corners which can result in high engine oil temperature and oil pump starvation. Introducing our newest component, the backflow preventer (BFP).

Our Remote Oil Filter Adapter Backflow Preventer (BFP) goes directly in place of the original factory oil filter canister allowing for ease of installation of lubrication & pressure accessories such as oil pressure compensator(s), external oil cooler(s) and a larger, metal oil filter element. Our (BFP) also eliminates restrictive filter size spin on oil filter adapters and sandwich plate options by combining the two into one component & integrating a backflow check valve. Two key benefits here is our (BFP) will provide a greater ground clearance allowing for a much larger remote mounted filter to be placed, which will provide a better oil filtration and flow for the engine assembly, as well as the ability to connect & install multiple oil lubrication & cooling accessories.

Some spin-on oil filter kits currently on the market go in place of the original filter canister area, eliminating the possibility of having multiple oil system accessories, forcing you to use either an oil cooler delete plate with external oil cooler, a spin on "sandwich adapter" in conjunction with the spin on filter adapter to connect an accessory OR nothing at all with simply a smaller filter. This will also create ground clearance issues having multiple components sandwiched together with the inclusion of the oil filter, especially on lowered vehicles. The only way to prevent a ground clearance issue on this setup is to use the smallest filter possible. If a spin on filter adapter & sandwich plate are used without the inclusion of a spin on oil filter, ground clearance will not be the issue at hand; the connection of multiple oil lubrication accessories becomes limited and the greater number of items to purchase increases to have the same oil kit solutions found with our (BFP) stage kits. A remote oil filter adapter and filter will still need to be placed. Save time and money with our (BFP).

A sandwich adapter combo with the spin-on oil filter will also require the use of an external oil check valve which has a maintenance life and will need to be replaced overtime. The (BFP)'s integrated check valve has a lifetime service life eliminating the need to replace a check valve.

Smaller filters are a lot more restrictive on their filtration and will have decreased service intervals. Compared to the original factory oil filter element and other smaller spin-on oil filters, the larger oil filter found on our (BFP) kits diminishes dry starts under cold cranking conditions due to its low restriction design & internal anti-drain back valve assuring immediate oil flow. The larger filter also has a greater burst pressure of up to 500psi designed to take pressure spikes in race engines that have higher oil pressure.

Simple. Easy. Reliable.

160F Low Temperature Thermostat HOUSING WITH INSERT & Gasket for 986 as well as 996 models and replaces the factory 186F thermostat insert, Porsche part numbers 996 106 125 52 (53). Also fits 987 and 997 models to 2008. Does not fit MY09+ DFI engines.



Fits:
Porsche 986 Boxster 1997-2004
Porsche 996 C2, C4
Porsche 987 Boxster 2005>>
Porsche 997 2005-08

Price includes new low temperature thermostat insert manufactured in Germany by one of the same manufacturers that makes the oe thermostat insert, allowing you to reuse your original housing. Provides increased cooling capacity increasing power while ensuring consistent performance and extending engine-component longevity.

Installation recommended only by trained Porsche technician or Porsche service department using genuine Porsche coolant.

Click 'Zoom in' for large parts diagram.
Diagram Ref No 5, 6 & 7

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99610601361

您正在查看的产品与这些编号存在交叉引用关系

160F Low Temperature Thermostat housing without gasket / seal for 986 as well as 996 models and replaces the factory 186F thermostat insert, Porsche part numbers 996 106 125 52 (53). Also fits 987 and 997 models to 2008. Does not fit MY09+ DFI engines.



Fits:
Porsche 986 Boxster 1997-2004
Porsche 996 C2, C4
Porsche 987 Boxster 2005>>
Porsche 997 2005-08

Price includes new low temperature thermostat insert manufactured in Germany by one of the same manufacturers that makes the oe thermostat insert, allowing you to reuse your original housing. Provides increased cooling capacity increasing power while ensuring consistent performance and extending engine-component longevity.

Installation recommended only by trained Porsche technician or Porsche service department using genuine Porsche coolant.

Click 'Zoom in' for large parts diagram.
Diagram Ref No 5, 6

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99610601361

您正在查看的产品与这些编号存在交叉引用关系