Wössner Forged Piston Kit

Wössner forged piston kit.



Fits:
Porsche 997.1 (911) 3.6 C2 & C4

Please note, pistons not suitable for Alusil or Lokasil coated bores
Suitable to use with Nikasil liners.

Specification
Technical information is sourced from Wössner's latest catalogue:

Part Number: K9468
Engine Type: M96.05
OE Bore Size: 96.00mm

Bore Sizes Available:
- 96.00mm - 3824.21, Compression Ratio: 11.3:1
- 96.50mm - 3862.93, Compression Ratio: 11.4:1

Bore Size 96.00mm
Piston Size:
Over Size: 0mm
Displacement CC:
Dome / Bowl Volume:
Wössner Comp Ratio: 11.3:1
Ring Part Number: 960XSY-3
Please note, pistons not suitable for Alusil or Lokasil coated bores

Bore Size 96.50mm
Piston Size:
Over Size: 0.5mm
Displacement CC:
Dome / Bowl Volume:
Wössner Comp Ratio: 11.4:1
Ring Part Number: 965XSY-3
Please note, pistons not suitable for Alusil or Lokasil coated bores

Please CLICK HERE for Technical release – Piston / Con rod
orientation.

Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.

Price shown is for complete engine set.

Wössner forged piston kit.



Fits:
Porsche 997 (911) Carrera S & 4S 3.8L 24v

Please note, pistons not suitable for Alusil or Lokasil coated bores
Suitable to use with Nikasil liners.

Specification
Technical information is sourced from Wössner's latest catalogue:

Part Number: K9474
Engine Type: M97.01
OE Bore Size: 99.00mm

Bore Sizes Available:
- 99.00mm - 3824.21, Compression Ratio: 11.8:1
- 99.50mm - 3862.93, Compression Ratio: 11.9:1
- 100.00mm - 3901.85, Compression Ratio: 12.0:1

Bore Size 99.00mm
Piston Size: 98.93mm
Over Size: 0mm
Displacement CC: 3824cc
Dome / Bowl Volume: 13.8cc
Wössner Comp Ratio: 11.8:1
Ring Part Number: 960XPY
Please note, pistons not suitable for Alusil or Lokasil coated bores

Bore Size 99.50mm
Piston Size: 99.43mm
Over Size: 0.5mm
Displacement CC: 3862cc
Dome / Bowl Volume: 13.8cc
Wössner Comp Ratio: 11.9:1
Ring Part Number: 965XPY
Please note, pistons not suitable for Alusil or Lokasil coated bores

Bore Size 100.00mm
Piston Size: 99.93mm
Over Size: 1mm
Displacement CC: 3901cc
Dome / Bowl Volume: 13.8cc
Wössner Comp Ratio: 12.0:1
Ring Part Number: 970XPY
Please note, pistons not suitable for Alusil or Lokasil coated bores

Standard
Stroke: 82.8mm
Dome/Bowl Volume: -13.8cc
OE Comp. Ratio: 11.8:1
Comp. Height : 33mm
Valves Per Cylinder: 4
Cylinders: 6

Please CLICK HERE for Technical release – Piston / Con rod
orientation.

Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.

Price shown is for complete engine set.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

K9474

您正在查看的产品与这些编号存在交叉引用关系

Wössner Forged Piston Kit for Porsche 997 GT3 RS 3.8 24v 2006- (415PS)



Suitable to use with Nikasil liners.

Specification
Technical information is sourced from Wossner's latest catalogue:

Part Number: K9268
Engine Type: -
OE Bore Size: 100.00mm

Bore Sizes Available:
- 102.00mm - 3745.71cc

Stroke: 76.4mm
Dome/Bowl Volume: +0.82cc
Wössner Comp. Ratio: 12.7:1
OE Comp. Ratio: 12.0:1
Comp. Height : 30.10mm
Valves Per Cylinder: 4
Cylinders: 6

Please CLICK HERE for Technical release – Piston / Con rod
orientation.

Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.

Price shown is for complete engine set.