Track Rods

Bump steer adjustable track rod ends.



Fits
Porsche 986 Boxster
Porsche 996, 997
Porsche 987 Boxster and Cayman
Porsche 981 Boxster and Cayman
Porsche 991

Set of 2 x adjustable track rod ends

Correct geometry for lowered cars with bump steer adjustment and angled head.

Bump steer adjustable – The built in bump steer adjustment lets you dial in a minimal bump steer curve.

Angled head – Lower the car and the tie rods angle down. This shifts the ball stud from its center and limits the available range of articulation.
We solve this problem by angling the head to move the stud back towards the center of its range of articulation at static ride height.

Fully weather sealed – Proper boot at the ball stud to keep water and contaminant out for extended life.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2180008

您正在查看的产品与这些编号存在交叉引用关系

Front Bump Steer Kit.
SET OF 2

replacement for 99634713104, 99634713103, 99134713100,



Fits:
Porsche 996 C2, C4, C4S, Turbo, GT2, GT3
Porsche 997 C2, C2S, C4, C4S, Turbo, GT2, GT3
Porsche 986 Boxster / Boxster S
Porsche 987 Boxster / Boxster S
Porsche 987 Cayman / Cayman S

The RSS Adjustable Toe Steer Kit is designed for 996 and 997 models that have been lowered.

This kit will help minimize suspension geometry changes in the front of the vehicle and allow additional toe adjustment at the toe steer arm. Features heavy duty, high tolerance monoball rod
ends for precise suspension articulation with improved handling and feedback. The rod ends are also height adjustable to help reduce/eliminate bump steer.

The links are sold as a pair for the front of the car.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

370

您正在查看的产品与这些编号存在交叉引用关系

Front bump steer kit replaces factory steering tie rods. Price per EACH. Requires 2 per car.
Replacement for 99634713104, 99634713103, 99134713100,



Fits:
Porsche 996
Porsche 997
Porsche 987 Boxster
Porsche 987 Cayman
Porsche 991
Porsche 981 Boxster
Porsche 981 Cayman

If you're serious about how your 996, 997, 986 Boxster, 987 Boxster, 987 Cayman, 991, 981 Boxster and 981 Cayman handles, you should upgrade the factory tie rods with an adjustable bump steer kit. There is one major drawback to the factory tie rods, bump steer. Bump steer results from a tie rod that is angled from the steering rack to the spindle. An angled tie rod end will have a larger horizontal travel distance than the rest of the suspension, compared to a level link. Rennline's adjustable bump steer kits solve this problem. Manufactured from 6061 aluminum and feature a turnbuckle design that allow each arm to be lengthened or shortened as needed to restore proper suspension geometry on a lowered Porsche. A number of spacers are also included and can be added or removed accordingly to get a level tie rod for your vehicles specific ride height. The FK Teflon-lined rod end bearings ensure precision handling and lock in your car’s alignment settings, ensuring predictable cornering under all conditions.

Note: 2 kits required per car. Rubber Boots not included but available separately.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

S7510

您正在查看的产品与这些编号存在交叉引用关系

Front toe steer / bump steer kit XLARGE.



SET OF 2
replacement for 99634713104, 99634713103, 99134713100,

Fits:
FOR ALL Porsche 981, 982, GT4, 991 INCLUDING TURBO & GT3/GT3RS.

Also would fit Porsche 986, 996, 997, 987 that are running extreme amounts of negative camber or that have widened the front track width.

The RSS Adjustable Front Toe/Bump Steer XL Kit is designed for Porsche models that have been lowered. This kit will help minimize the suspension geometry change in the front of the vehicle. Allows for bump steer adjustment. Improves handling, feedback and control.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

371

您正在查看的产品与这些编号存在交叉引用关系

Outer ball joint pin rebuild kit for Front bump RSS toe steer link/arm. Fits Part # 370 + 371



Kit includes: 1x Tapered Stud, 1 x Upper Lock Nut, 1 x Lower Lock Nut, 2 x Stud Spacers/Washers.

USER NOTE: A new 382 Kit should be installed once ball joint pin has been removed from hub.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

382

您正在查看的产品与这些编号存在交叉引用关系

带波纹管的横拉杆内接头套件。
价格为每个



适合：
保时捷 987 Boxster 全部
保时捷 987C Cayman 全部
保时捷 997 全部

转向齿条通过两个横拉杆控制前轮，这两个横拉杆的末端是可更换的接头——“横拉杆端部”，连接到旋转轮毂上。这些最终会磨损，导致转向和操作出现问题，并成为英国交通部以及其他国家法定检查的故障点。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99734732201

您正在查看的产品与这些编号存在交叉引用关系

Track rod inner joint.
Price is for each



Fits :
Porsche 987 Boxster ALL
Porsche 987C Cayman ALL
Porsche 997 ALL

The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.

Click 'Zoom in' for large parts diagram.
Diagram Ref No 6.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99734732201

您正在查看的产品与这些编号存在交叉引用关系

横拉杆内接头。
价格为每个

#梅尔#

适合 ：
保时捷 987 Boxster 全部
保时捷 987C Cayman 全部
保时捷 997 全部

转向齿条通过两个横拉杆控制前轮，这两个横拉杆的末端是可更换的接头——“横拉杆端部”，连接到旋转轮毂上。这些最终会磨损，导致转向和操作出现问题，并成为英国交通运输部以及其他国家法定检查的故障点。

单击“放大”查看大零件图。
图参考号 6。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99734732201

您正在查看的产品与这些编号存在交叉引用关系

横拉杆内接头。街头版
价格为每个



适合 ：
保时捷 987 Boxster 全部
保时捷 987C Cayman 全部
保时捷 997 全部

转向齿条通过两个横拉杆控制前轮，这两个横拉杆的末端是可更换的接头——“横拉杆端部”，连接到旋转轮毂上。这些最终会磨损，导致转向和操作出现问题，并成为英国交通部以及其他国家法定检查的故障点。

单击“放大”查看大零件图。
图参考号 6。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99734732201

您正在查看的产品与这些编号存在交叉引用关系

Steering rod with ball joint. This is quite a common problem and could need to be replaced.
Fits left or right side.



Fits:
Porsche 996 Carrera
Porsche 996 Turbo
Porsche Boxster 986 / 987
Porsche 987C Cayman
Porsche 997

Price is for each.

Click 'Zoom in' for large parts diagram.
Diagram ref no 8

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99634713105

您正在查看的产品与这些编号存在交叉引用关系

Steering rod with ball joint. This is quite a common problem and could need to be replaced.
Fits left or right side.



Fits:
Porsche 996 Carrera
Porsche 996 Turbo
Porsche Boxster 986 / 987
Porsche 987C Cayman
Porsche 997

Price is for each.

Click 'Zoom in' for large parts diagram.
Diagram ref no 8

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99634713105

您正在查看的产品与这些编号存在交叉引用关系

Steering rod with ball joint. This is quite a common problem and could need to be replaced.
Fits left or right side.



Fits:
Porsche 996 Carrera
Porsche 996 Turbo
Porsche Boxster 986 / 987
Porsche 987C Cayman
Porsche 997

Price is for each.

Click 'Zoom in' for large parts diagram.
Diagram ref no 8

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99634713105

您正在查看的产品与这些编号存在交叉引用关系