高性能摩擦制动器
按品牌过滤
PFC Two-Piece Floating 'Direct Drive V3' Front SLOTTED Brake Discs for Porsche
代码: 373.076.6
Hat and Floating disc assembly kit, Direct Drive V3, Slotted Road discs (Left OR Right).
Dimensions: 373 × 60 × 29 mm
This Product Fits:
Porsche 997 GT2 / GT3 / RS / Turbo 2005>>
Porsche 997 All Gen 2 cars 2011>>
Ever since the disc brake was invented vibration and pulsation caused by thermal expansion has been a major issue giving rise to warped discs - until now?
PFC has released new V3 disc and hat technology. The advanced design features a patented attachment design that uses a retention ring that holds the hat and disc together.
The ring means no need for torque wrenches, and no hassle. The ability to change a disc quickly and efficiently saves time and effort. As well as being convenient, the new V3 technology is much lighter than previous designs, making it easier to put on and pull off, and making the vehicle lighter.
This V3 disc retention method is based on the use of a two-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat.
● Exceptional manufacturing standards - Run out less than 0.0254mm, Thickness variation less than 0.00762mm. Surface finishes less than .7 microns.When used in conjunction with Z rated fast road/track day pads, component life and on track performance markedly improved over competitors pads.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
373.076.6
您正在查看的产品与这些编号存在交叉引用关系
Dimensions: 373 × 60 × 29 mm
This Product Fits:
Porsche 997 GT2 / GT3 / RS / Turbo 2005>>
Porsche 997 All Gen 2 cars 2011>>
Ever since the disc brake was invented vibration and pulsation caused by thermal expansion has been a major issue giving rise to warped discs - until now?
PFC has released new V3 disc and hat technology. The advanced design features a patented attachment design that uses a retention ring that holds the hat and disc together.
The ring means no need for torque wrenches, and no hassle. The ability to change a disc quickly and efficiently saves time and effort. As well as being convenient, the new V3 technology is much lighter than previous designs, making it easier to put on and pull off, and making the vehicle lighter.
This V3 disc retention method is based on the use of a two-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat.
● Exceptional manufacturing standards - Run out less than 0.0254mm, Thickness variation less than 0.00762mm. Surface finishes less than .7 microns.When used in conjunction with Z rated fast road/track day pads, component life and on track performance markedly improved over competitors pads.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
373.076.6
373.076.63
373.076.64
37307663
37307663
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
价格低至: €788.62
PFC Racing Front and rear brake kit, with slotted 380mm discs. Porsche 996 / 997 2WD / 987.2 and 981
代码: 0380.0003
PFC Racing Front and rear brake kit with Slotted trackday / race 380 x 34mm front and 380 x 30mm rear disc assemblies.
Fits:
Porsche 996 / 997 2WD (2000>>)
Porsche 987.2 Boxster & Cayman
Porsche 981 Boxster & Cayman
Please send wheel fitment information before ordering. There can be clearance issues with some profiles.
PFC high performance brake kits include:
• Forged ZR95 6-piston front caliper (part no 95.405.290.365.11 / 95.405.290.365.12)
• Forged ZR96 4-piston rear caliper (part no 96.380.290.365.01 / 96.380.290.365.02)
• Front Direct Drive V3 discs on alloy hats (part no 380.067.631 / 380.067.641)
• Rear Direct Drive V3 discs on alloy hats (part no 380.067.63 / 380.067.64)
• Race-specification brake pads (FA 7995.11.22.44 / RA 7969.11.20.44)
• Hardware (part no 225.143.335.21 FA Bracket Kit / 130.288.120.21 RA Spacer Kit)
• Custom-engineered for race and track use
• Genuine race technology
PFC kits offer the best braking performance available, along with great looks!
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
0380.0003
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 996 / 997 2WD (2000>>)
Porsche 987.2 Boxster & Cayman
Porsche 981 Boxster & Cayman
Please send wheel fitment information before ordering. There can be clearance issues with some profiles.
PFC high performance brake kits include:
• Forged ZR95 6-piston front caliper (part no 95.405.290.365.11 / 95.405.290.365.12)
• Forged ZR96 4-piston rear caliper (part no 96.380.290.365.01 / 96.380.290.365.02)
• Front Direct Drive V3 discs on alloy hats (part no 380.067.631 / 380.067.641)
• Rear Direct Drive V3 discs on alloy hats (part no 380.067.63 / 380.067.64)
• Race-specification brake pads (FA 7995.11.22.44 / RA 7969.11.20.44)
• Hardware (part no 225.143.335.21 FA Bracket Kit / 130.288.120.21 RA Spacer Kit)
• Custom-engineered for race and track use
• Genuine race technology
PFC kits offer the best braking performance available, along with great looks!
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
0380.0003
0380.0003
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
€15,932.27
当前 €15,613.62
由供应商供货
PFC Track & Race Brake Front Pads Porsche 996 C4S, 996TT, 996 GT3 , 997 S
代码: 7818.
PERFORMANCE FRICTION Fast Road & Race Brake Pads For Porsche 7818 / E2474 / T5110. Replacement OE Part No 99635194912.
This Product Fits:
Porsche 996 C4S 02-05 Front
Porsche 996 GT3 MKI 99-01 Front
Porsche 996 Turbo 02-05 Front
Porsche 997 3.8L C2S/C4S 2005>> Front
Porsche 997 3.8L MK11 C2S/C4S 2009>> Front
Please note: These pads have the clip cut out for the brake sensor but there is no hole drilled in the pad to accept the wire. As this is track and racing pad it is not common practice to fit the sensors. If you insist on fitting the sensors, you will have to drill a hole for the wire to slot in.
The absolute best brakes on the market Performance Friction brakes are the standard of excellence in high-performance vehicles, and street vehicles.
Track days and street upgrades for nearly every make and model are manufactured to meet or exceed OE specifications. Whether you're driving a brand new Porsche or a vintage collectible, we've got the brakes to fit your needs. Design 911 offer a wide range of Performance Friction brake pads for all Porsche models from 1970-2010, also in the program are a range of Two-piece floating street upgrade disc and replacement steel disc for cars with Porsche Ceramic Composite Brakes (PCCB).
Information about Racing Compound Characteristics
Information about Brake Pad Size
Sold as set of 4 pads for one axle.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
7818.
您正在查看的产品与这些编号存在交叉引用关系
This Product Fits:
Porsche 996 C4S 02-05 Front
Porsche 996 GT3 MKI 99-01 Front
Porsche 996 Turbo 02-05 Front
Porsche 997 3.8L C2S/C4S 2005>> Front
Porsche 997 3.8L MK11 C2S/C4S 2009>> Front
Please note: These pads have the clip cut out for the brake sensor but there is no hole drilled in the pad to accept the wire. As this is track and racing pad it is not common practice to fit the sensors. If you insist on fitting the sensors, you will have to drill a hole for the wire to slot in.
The absolute best brakes on the market Performance Friction brakes are the standard of excellence in high-performance vehicles, and street vehicles.
Track days and street upgrades for nearly every make and model are manufactured to meet or exceed OE specifications. Whether you're driving a brand new Porsche or a vintage collectible, we've got the brakes to fit your needs. Design 911 offer a wide range of Performance Friction brake pads for all Porsche models from 1970-2010, also in the program are a range of Two-piece floating street upgrade disc and replacement steel disc for cars with Porsche Ceramic Composite Brakes (PCCB).
Information about Racing Compound Characteristics
Information about Brake Pad Size
Sold as set of 4 pads for one axle.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
7818.
7818.08.17.44
7818.11.17.44
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
价格低至: €355.99
Titanium Brake Pad Heat Shields Size: E2405/T5104. Porsche 986/987 Boxster / 987C Cayman / 996 / 997 (OE Part No 99635294903 / 99735193904)
代码: TS-917-4
Titanium Brake Pad Heat Shields.
This Product Fits:
Porsche 986 Boxster S 3.2 99-05 Front
Porsche 987 Boxster S 3.2 05>> Front
Porsche 987C Cayman 06>> Front
Porsche 996 3.4/3.6 97-05 Front
Porsche 997 3.6L C2/C4* 05-09 Front
*Not S 3.8L
Porsche 997 3.6L C2/C4* 09>> Front
*Not S 3.8L
Porsche 996 C4S 02-05 Rear
Porsche 996 GT2 02-05 Rear
Porsche 996 GT3 MKI 99-01 Rear
Porsche 996 GT3 MKII 02-05 Rear
Porsche 996 3.6LTurbo 02-05 Rear
Porsche 997 3.8L C2S/C4S 05-09 Rear
The problem of brake fluid boiling is simply traced to heat transferring from the rotors and pads directly into the fluid through the caliper pistons. When brake fluid boils, it releases air that is normally part of the molecular structure of the fluid. This air is compressible of course, and the brake pedal goes to the floor instead of moving the caliper pistons. Production cars tend to suffer from this on track days more as they don't usually have the extensive cooling duct and exotic brake materials as true racing cars. True racing only brake calipers generally come with titanium caliper pistons for one reason. Titanium as a material has low thermal conductivity. This means that it is very bad at transferring heat, which is fantastic if you are trying to keep your fluid cool.
The Girodisc solution to help prevent fluid boiling is to use a thin titanium shim placed between the pad back and the pistons, to keep the braking heat from transferring into the pistons and fluid. Here is a comparison of materials and their relative thermal conductivity ratings:
Titanium 6AL-4V 6.7 W/mk
Steel 52 W/mk
Aluminum 130 W/mk
You can see that Titanium will transfer far less heat than steel and especially aluminum. For cars that are going to see hard or multiple track days, these shims are cheap protection from losing the pedal due to boiling at the wrong time and making the day very expensive.
Water jet cut to exact size, no cutting, grinding, or swearing involved.
Price is per axle (four pieces)
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
TS-917-4
您正在查看的产品与这些编号存在交叉引用关系
This Product Fits:
Porsche 986 Boxster S 3.2 99-05 Front
Porsche 987 Boxster S 3.2 05>> Front
Porsche 987C Cayman 06>> Front
Porsche 996 3.4/3.6 97-05 Front
Porsche 997 3.6L C2/C4* 05-09 Front
*Not S 3.8L
Porsche 997 3.6L C2/C4* 09>> Front
*Not S 3.8L
Porsche 996 C4S 02-05 Rear
Porsche 996 GT2 02-05 Rear
Porsche 996 GT3 MKI 99-01 Rear
Porsche 996 GT3 MKII 02-05 Rear
Porsche 996 3.6LTurbo 02-05 Rear
Porsche 997 3.8L C2S/C4S 05-09 Rear
The problem of brake fluid boiling is simply traced to heat transferring from the rotors and pads directly into the fluid through the caliper pistons. When brake fluid boils, it releases air that is normally part of the molecular structure of the fluid. This air is compressible of course, and the brake pedal goes to the floor instead of moving the caliper pistons. Production cars tend to suffer from this on track days more as they don't usually have the extensive cooling duct and exotic brake materials as true racing cars. True racing only brake calipers generally come with titanium caliper pistons for one reason. Titanium as a material has low thermal conductivity. This means that it is very bad at transferring heat, which is fantastic if you are trying to keep your fluid cool.
The Girodisc solution to help prevent fluid boiling is to use a thin titanium shim placed between the pad back and the pistons, to keep the braking heat from transferring into the pistons and fluid. Here is a comparison of materials and their relative thermal conductivity ratings:
Titanium 6AL-4V 6.7 W/mk
Steel 52 W/mk
Aluminum 130 W/mk
You can see that Titanium will transfer far less heat than steel and especially aluminum. For cars that are going to see hard or multiple track days, these shims are cheap protection from losing the pedal due to boiling at the wrong time and making the day very expensive.
Water jet cut to exact size, no cutting, grinding, or swearing involved.
Price is per axle (four pieces)
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
TS-917-4
23329
07.B314.15
07B31415
99635294903
99735193904
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
€89.10
当前 €87.32
库存
Titanium Brake Pad Heat Shields Size: E2474/T5110 (OE Part No 99635194912)
代码: TS-916-4
Titanium Brake Pad Heat Shields.
This Product Fits:
Porsche 996 C4S 02-05 Front
Porsche 996 GT3 MKI 99-01 Front
Porsche 996 Turbo 02-05 Front
Porsche 997 3.8L C2S/C4S 05-09 Front
Porsche 997 3.8L C2S/C4S 09>> Front
The problem of brake fluid boiling is simply traced to heat transferring from the rotors and pads directly into the fluid through the caliper pistons. When brake fluid boils, it releases air that is normally part of the molecular structure of the fluid. This air is compressible of course, and the brake pedal goes to the floor instead of moving the caliper pistons. Production cars tend to suffer from this on track days more as they don't usually have the extensive cooling duct and exotic brake materials as true racing cars. True racing only brake calipers generally come with titanium caliper pistons for one reason. Titanium as a material has low thermal conductivity. This means that it is very bad at transferring heat, which is fantastic if you are trying to keep your fluid cool.
The Girodisc solution to help prevent fluid boiling is to use a thin titanium shim placed between the pad back and the pistons, to keep the braking heat from transferring into the pistons and fluid. Here is a comparison of materials and their relative thermal conductivity ratings:
Titanium 6AL-4V 6.7 W/mk
Steel 52 W/mk
Aluminum 130 W/mk
You can see that Titanium will transfer far less heat than steel and especially aluminum. For cars that are going to see hard or multiple track days, these shims are cheap protection from losing the pedal due to boiling at the wrong time and making the day very expensive.
Water jet cut to exact size, no cutting, grinding, or swearing involved.
Price is per axle (four pieces)
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
TS-916-4
您正在查看的产品与这些编号存在交叉引用关系
This Product Fits:
Porsche 996 C4S 02-05 Front
Porsche 996 GT3 MKI 99-01 Front
Porsche 996 Turbo 02-05 Front
Porsche 997 3.8L C2S/C4S 05-09 Front
Porsche 997 3.8L C2S/C4S 09>> Front
The problem of brake fluid boiling is simply traced to heat transferring from the rotors and pads directly into the fluid through the caliper pistons. When brake fluid boils, it releases air that is normally part of the molecular structure of the fluid. This air is compressible of course, and the brake pedal goes to the floor instead of moving the caliper pistons. Production cars tend to suffer from this on track days more as they don't usually have the extensive cooling duct and exotic brake materials as true racing cars. True racing only brake calipers generally come with titanium caliper pistons for one reason. Titanium as a material has low thermal conductivity. This means that it is very bad at transferring heat, which is fantastic if you are trying to keep your fluid cool.
The Girodisc solution to help prevent fluid boiling is to use a thin titanium shim placed between the pad back and the pistons, to keep the braking heat from transferring into the pistons and fluid. Here is a comparison of materials and their relative thermal conductivity ratings:
Titanium 6AL-4V 6.7 W/mk
Steel 52 W/mk
Aluminum 130 W/mk
You can see that Titanium will transfer far less heat than steel and especially aluminum. For cars that are going to see hard or multiple track days, these shims are cheap protection from losing the pedal due to boiling at the wrong time and making the day very expensive.
Water jet cut to exact size, no cutting, grinding, or swearing involved.
Price is per axle (four pieces)
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
TS-916-4
23139
23330
07.B314.16
07B31416
99635194912
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
€89.10
当前 €87.32
库存
显示从1到5(共5个产品)
关于高性能摩擦制动器
高性能摩擦刹车片
“第一步是将刹车片从有机或半金属原始设备材料升级为 Carbon Metallic® 刹车片……我们发现这些压缩性较低的刹车片改善了初始咬合力,并将踏板行程减少了近半英寸…… ”
Carbon Metallic® 刹车片在材料和工艺上是独一无二的——由高度有序的碳晶体结构制成,通过高密度压缩模制而成,并通过航空质量热处理进行加工。
您可能也喜欢
- 刹车片及制动盘组件
- SPORTS 系列刹车片及制动盘组件
- 标准制动盘
- 标准刹车片
- SPORTS 系列制动盘
- Brembo 标准制动器
- Brembo 赛车制动器
- TEXTAR 制动器
- PAGID 赛车制动器
- Zimmermann 制动器
- Giro 开槽制动盘
- EBC 制动器
- Surface Transforms 陶瓷制动器
- Rotinger 石墨系列
- 陶瓷制动盘替换件
- 刹车片磨损传感器
- 刹车片减震垫片
- 制动钳螺栓/制动盘螺钉
- 销钉套件及导板
- 高性能制动软管
- 标准制动软管
- 制动钳和制动管路
- 制动钳
- 制动钳升级版
- 手刹蹄片
- 手刹线
- 制动盘盖板
- ABS | 速度传感器
- 制动钳密封件 | 活塞
- 制动伺服装置 | 助力器
- 制动主缸
- 制动液贮存箱
- 制动液
- 中央锁止轮毂
- 钛制刹车片防护罩
- 自制制动器套件
流行车型