发动机改装及升级

革命性的 997 Turbo IPD“Y”形管道专为要求更高的 Turbo 性能客户打造。这不是工厂 Y 形管道的铸造复制品，而是从头开始的完全重新设计，旨在为原厂和经过高度改装的 Turbo 提供更大的空气流量。



工厂 Y 型管在增加大量功率增益时会变得受限。IPD“Y”型管具有更大的入口和优化的分流面积，可实现更大的功率增益。这种更卓越、更高效的设计比工厂 Y 型管多出 126 cfm 的流量，可提供提高任何 Turbo 性能标准所需的额外功率。

越大并不一定越好，而 IPD“Y”形管道的设计旨在提供最佳流量，而不会太大而导致增压响应损失。这些“Y”形管道还可以特别订购定制粉末涂层颜色和陶瓷涂层或抛光，以提高涡轮增压发动机的美感。

IPD 997 Turbo Y 管设计为工厂 OEM Y 管的直接替代品。安装 IPD Y 管无需进行任何修改或制造。这是一种简单直接的 R & R（拆卸和重新安装）螺栓升级。

997.1 Turbo / GT2 Hi-Flow Y 管：HP 增益 15-20。直接螺栓更换 / 无需修改

适合：
保时捷 997.1 Turbo

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

97500

您正在查看的产品与这些编号存在交叉引用关系

Performance engine mounts (PAIR). Included two M12 x 1.75 Nuts



Separate inserts available for varying densities
Shore ratings 65A Street (available separately)
Shore ratings 75A Fast Road (included in engine mounts)
Shore ratings 85A Track (available separately)

Fits:
Porsche 964 C2 / C4 / RS / Turbo
Porsche 993 C2 / C4 / RS / Turbo
Porsche 996 C2, C4, C4S, Turbo, GT2, GT3
Porsche 997 C2, C2s, C4, C4s, Turbo, GT2, GT3

Please note: the threads needs to be treated with loctite before installation (not sold with the product).

Replacing your factory engine mounts with these performance semi-solid mounts will dramatically decrease engine movement which then will result in better acceleration and handling of your Porsche.

CNC machined mounts with PU bushes are absolute must have for any car on track or on the street. Very easy to replace by experienced DIYers.

For 911 & Porsche world article / fitment guide pdf please CLICK HERE

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3609309625

您正在查看的产品与这些编号存在交叉引用关系

Tuneable Semi-Solid Engine Mount.
SET OF 2 Includes three pairs of inserts in varying densities

 

Fits:
Porsche 964/993/996/997

The Rennline Tune-able Engine Mount for the 964, 993, 996, and 997 offers the ultimate in adjust ability for your car. Replacing your compliant factory mounts will decrease engine movement resulting in better acceleration, handling and significantly increased shifter feel. This is the ultimate solution for almost any car, and allows you to tune our mounts for the way you drive. Our mounts are CNC machined from billet aluminium and include three pairs of inserts in varying densities. Tune your mounts by using the softer inserts to reduce engine slop and avoid missed shifts in your street car, or utilise the stiffest inserts to get the most from a more focused track car. You can even mix and match, giving you 9 possible combinations to let you dial in our mount to your specifications. Here at Rennline we know you want your Porsche to be flawless, and that is why we are Driven to Improve Excellence.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

M18

您正在查看的产品与这些编号存在交叉引用关系

RSS Performance engine mounts (PAIR).



Fits:

Porsche 996 C2, C4, C4S, Turbo, GT2, GT3
Porsche 997 C2, C2s, C4, C4s, Turbo, GT2, GT3

With factory hydraulic engine mounts, the drive train will move independent of the chassis during acceleration and cornering loads. This movement can upset the balance of the vehicle and create negative handling effects.

RSS Tarmac Series Performance Engine Mounts minimise these effects by utilising specialised polyurethane bushings which offer a firmer, more direct driving feel with optimum feedback. This upgrade will not adversely effect ride quality or cause knock sensor issues commonly associated with solid engine mounts.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

624

您正在查看的产品与这些编号存在交叉引用关系

Rennline Solid Motor / Engine Mounts Pair. ALUMINIUM.
SET OF 2



Fits:
Porsche 964
Porsche 993
Porsche 996
Porsche 997

Solid engine mounts are a smart upgrade to any track or aggressive street car, and were installed on Porsche factory race cars. Stock mounts are made of compliant rubber, and contribute to imprecise shifting and inferior throttle response. Solid mounts create slightly more interior vibration than rubber mounts, but securely connect the engine and transmission assembly to the car's unibody, creating a crisper throttle response and shifter feel. Rennline's solid mounts are CNC machined from 6061 aluminum for strength and light weight, and come as a pair with new Grade 8 mounting hardware. Sold as a set of (2)

Motorsport Product

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

M08

您正在查看的产品与这些编号存在交叉引用关系

Engine mount bush kit
Shore rating 65A for 3609309625 performance engine mounts



Fits:
Porsche 996 C2, C4, C4S, Turbo, GT2, GT3
Porsche 997 C2, C2s, C4, C4s, Turbo, GT2, GT3

Shore ratings 65A Street
Shore ratings 75A Fast Road (including in engine mounts)
Shore ratings 85A Track


For 911 & Porsche world article / fitment guide pdf please CLICK HERE

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3609309665

您正在查看的产品与这些编号存在交叉引用关系

Engine mount bush kit
Shore rating 85A for 3609309625 performance engine mounts



Fits:
Porsche 996 C2, C4, C4S, Turbo, GT2, GT3
Porsche 997 C2, C2s, C4, C4s, Turbo, GT2, GT3

Shore ratings 65A Street
Shore ratings 75A Fast Road (including in engine mounts)
Shore ratings 85A Track


For 911 & Porsche world article / fitment guide pdf please CLICK HERE

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3609309685

您正在查看的产品与这些编号存在交叉引用关系

高流量涡轮进气软管套件

#八八八#

适合：
保时捷 911.1 Turbo 和 GT2 2007 年至 2009 年，H6 双涡轮增压（473 马力，523 马力）Tiptronic 或 6 速手动

do88 保时捷性能硅胶软管的显著优势：

• 硅橡胶采用 4 层聚酯纤维织物增强
• 这些软管的总内径更大，可改善空气流通！
• 流畅的流程转换！
• 优异的热性能，这些软管不会吸收发动机的热量！
• 软管采用不锈钢丝加固，消除了如此大功率的发动机内爆的风险！
• 氟硅橡胶内层增强了软管的耐化学性！

这款 Do88 硅胶软管套件包含安装所需的一切；
• 2 根钢丝增强硅胶软管，
• CNC 加工的 VTG 适配器，
• 不锈钢夹
• CNC 机床气口。

IMS Intermediate Shaft Bearing Upgrade Eternal Fix -58MM FLANGE - OPEN ENGINES (while doing an engine rebuild)



Fits:
Porsche 997 2005-08
Porsche Boxster 987
Porsche Cayman 987
(Not for M96 Engines)

Porsche Ims Intermediate Shaft Bearing Upgrade - Eternal Fix with Oil Pressure Feed - 58 MM - Open Engine Permanently Fix Your Intermediate Shaft With The Eternal Fix! Unlike Failure Prone Ball Bearings, Eps Uses A Patented Cylindrical Bearing With Thrust Control.
Prevent future catastrophic engine failure permanently with the only true Eternal Fix for the notorious Porsche intermediate shaft bearing. Unlike the other failure-prone ball bearing products that the original IMS and other upgrades on the market use, EPS uses a patented cylindrical bearing with thrust control that can be pressed directly into the back of the engine without disassembly. The cylindrical bearings have over 12 times the load capacity of other ball bearing solutions making the EPS IMS bearing the clear choice. Backed by a full 5-year warranty and includes an oil feed modification kit. Order yours today!

WHAT MAKES OUR SOLUTION DIFFERENT?

Roller bearings are not intended for carrying large axial loads. Similar to failure-prone ball bearings, when cylindrical roller bearings are used for thrust control, the roller becomes compromised due to the limited surface contact area on the sides of the rollers. The results of using a cylindrical bearing for thrust control will be similar to all other ball bearing solutions.

In our patented system, we use a 15mm cylindrical bearing with thrust control that allows for the separation of the axial load from the radial load. Our roller bearings do NOT carry the axis load (thrust control) on the side, which leaves the roller free to carry only the radial load (main load). The axial load is carried exclusively on the entire permitter of the outer race. This results in a bearing that is not overloaded and will last the lifetime of the engine.

EPS recommends using this product in conjunction to the Rear Main #8 Seal and Housing

IMS Intermediate Shaft Bearing Upgrade Eternal Fix -62MM FLANGE - CLOSED ENGINES (MUST USE OUR BORING TOOL IN ORDER TO INSTALL)
the boring tool can be purchased or rented from us
Code: 987997IMSTOOL

Fits:
Porsche 997 2005-08
Porsche Boxster 987
Porsche Cayman 987
(Not for M96 Engines)

Porsche Ims Intermediate Shaft Bearing Upgrade - Eternal Fix with Oil Pressure Feed - 62 MM - Closed Engine Permanently Fix Your Intermediate Shaft With The Eternal Fix! Unlike Failure Prone Ball Bearings, Eps Uses A Patented Cylindrical Bearing With Thrust Control.
Prevent future catastrophic engine failure permanently with the only true Eternal Fix for the notorious Porsche intermediate shaft bearing. Unlike the other failure-prone ball bearing products that the original IMS and other upgrades on the market use, EPS uses a patented cylindrical bearing with thrust control that can be pressed directly into the back of the engine without disassembly. The cylindrical bearings have over 12 times the load capacity of other ball bearing solutions making the EPS IMS bearing the clear choice. Backed by a full 5-year warranty and includes an oil feed modification kit. Order yours today!

WHAT MAKES OUR SOLUTION DIFFERENT?

Roller bearings are not intended for carrying large axial loads. Similar to failure-prone ball bearings, when cylindrical roller bearings are used for thrust control, the roller becomes compromised due to the limited surface contact area on the sides of the rollers. The results of using a cylindrical bearing for thrust control will be similar to all other ball bearing solutions.

In our patented system, we use a 15mm cylindrical bearing with thrust control that allows for the separation of the axial load from the radial load. Our roller bearings do NOT carry the axis load (thrust control) on the side, which leaves the roller free to carry only the radial load (main load). The axial load is carried exclusively on the entire permitter of the outer race. This results in a bearing that is not overloaded and will last the lifetime of the engine.

EPS recommends using this product in conjunction to the Rear Main #8 Seal and Housing

ID1700-XDS 喷油器动力学。14 毫米（灰色）适配器顶部。
6 件套。

＃语气＃

适合：
保时捷 996 涡轮增压
保时捷 997.1 涡轮增压

ID1700-XDS 的设计旨在填补 ID1300-XDS 和 ID2600-XDS 之间的空白，与这两者一样，它具有耐腐蚀内部结构，使其与所有已知的汽车燃料兼容。

经过长期开发，ID1700-XDS 拥有独特的磁路，可避免其他高阻抗高流量喷射器存在的电压和压力敏感性问题。ID1700-XDS 在当前汽车系统典型的高压条件下表现出色，在这些应用中可完美运行。

应用说明

ID1700-XDS 被设计为兼容所有燃料的喷射器，能够实现极高的流速。因此，它最常用于向增压发动机输送 E85，或偶尔用于极高马力应用中的汽油。这两种应用都不需要低流速下的延长线性，因此在设计过程中，它的优先级相对较低。

ID1700-XDS 将在 E85 上提供完美的化学计量怠速和巡航混合物，但与 ID2600-XDS 一样，不应期望在汽油上做到这一点。

如果您需要完美的汽油驾驶性能，ID1300-XDS 可以提供这种性能，并且每个 E85 喷射器可提供约 150 马力。

• 标称流速 – 1725cc/min @ 3.0 Bar (43.5 psi) 使用异辛烷，温度为 52 摄氏度 (125 华氏度)
• 最大燃油压差 – 7.0 Bar (101.5 psi)
• 燃料兼容性——与甲醇/乙醇/所有已知的碳氢化合物燃料兼容。
• 电连接器 – USCAR

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

1700.48.14.14.6

您正在查看的产品与这些编号存在交叉引用关系

中间轴 (IMS) 轴承套件 - 适用于保时捷

8102 专为快速安全地拆卸和更换 M96 和 M97 发动机上的保时捷 IMS（中间轴）轴承而开发，该发动机适用于 1999 年至 2008 年所有水冷 911、Boxster 和 Cayman 车型。配有凸轮轴和曲轴正时工具。

保时捷应用：911，Boxster，开曼（1999 - 2008）。
发动机代号应用包括：M96、M97。
套件包括适用于早期和晚期发动机的凸轮轴和曲轴锁定工具。
提供了 2 种拆卸轴承的方法。按照 OEM 说明安装轴承。
谢菲尔德制造。重要提示：使用前确保力螺钉已用二硫化钼润滑脂充分润滑。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

8102

您正在查看的产品与这些编号存在交叉引用关系

IMS Tool Kit by EPS



Bearing puller and adapter for extracting the existing bearing from the original center stud/bearing support (shown above)
Bearing driver tool to allow easy installation of the new bearing (shown above)
"Easy Out" adapter to allow extraction of bearing using the EPS bearing puller when and if the center stud/bearing support is broken or breaks during extraction
Crankshaft Pully TDC Lock Pin to secure the engine at the proper position to do an IMS Retrofit
Camshaft locks for both early 5-chain and later 3-chain engines (kit includes one ea.)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99610590102TOOL

您正在查看的产品与这些编号存在交叉引用关系

Magnetic oil drain plug, with a seal ring (washer).
Hard Anodized Aluminum, with magnet, 18 x 1.5mm



Fits:
Porsche 996 1997-04
Porsche 997 2005-08
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005-08
Porsche 987C Cayman 2005-08

A magnetic sump oil drain plug is a type of oil drain plug that contains a small magnet designed to attract and capture metallic particles that may be present in your engine's oil. While this type of drain plug is not exclusive to Porsche and can be used in various vehicles, it can provide several benefits, including:

Improved Engine Longevity: The magnet in the drain plug helps to capture tiny metal particles, such as iron, steel, or aluminum, that may circulate in the engine oil. Removing these particles can reduce wear and tear on engine components, potentially extending the engine's lifespan.

Enhanced Engine Performance: By reducing the presence of contaminants in the oil, a magnetic drain plug can help maintain the oil's lubricating properties, which is crucial for smooth engine operation. Clean oil can also contribute to improved fuel efficiency.

Early Detection of Problems: As the magnetic drain plug collects metallic debris, it can serve as an early warning system. By inspecting the drain plug during oil changes, you can get an idea of the engine's condition and detect any unusual wear or damage before it becomes a major issue.

Reduced Maintenance Costs: Regularly inspecting and cleaning a magnetic drain plug can prevent larger issues from developing over time. Addressing potential problems early can save you money on more extensive repairs down the road.

Peace of Mind: Knowing that you are taking steps to protect your engine from premature wear and tear can give you peace of mind as a vehicle owner. It's a relatively inexpensive and simple modification that can provide added assurance.

Easy Installation: Magnetic drain plugs are typically straightforward to install. They often replace the existing drain plug and require no special tools or modifications.

While magnetic drain plugs can offer these benefits, it's essential to remember that they are not a substitute for regular oil changes and proper maintenance. Regular oil changes with the appropriate oil and filter are still crucial for the health and longevity of your engine. Additionally, magnetic drain plugs may not capture all types of contaminants, so they should be seen as a supplementary measure rather than a comprehensive solution.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90021900930

您正在查看的产品与这些编号存在交叉引用关系

旋装式机油滤清器

适合：

保时捷 986/987 以及 996/997 车型，可替换保时捷零件号 996 107 020 53（54、55）。适用于发动机型号为 M96 或 M97 的 MY97-08 车辆。
不适合 GT2、GT3 或 Turbo 型号或任何风冷型号。仅针对配备 M96/M97 发动机的 MY97-08 车辆设计。

保时捷 987.2 MY09+ Boxster 和 Cayman 车型

保时捷 955 Cayenne S V8 和 955 Cayenne Turbo MY03-06

Oil Filter Spin-on Type (Short type)

Fits:

Porsche 986/987 as well as 996/997 models and replaces Porsche part numbers 996 107 020 53 (54, 55). For MY97-08 vehicles with M96 or M97 engine designation.
Does not fit GT2, GT3, or Turbo models or any aircooled models. Design only for MY97-08 vehicles with an M96/M97 engine.

Porsche 987.2 MY09+ Boxster and Cayman models

Porsche 955 Cayenne S V8 and 955 Cayenne Turbo MY03-06

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

OC1051

您正在查看的产品与这些编号存在交叉引用关系

用于安装 IMS 轴承的 IMS 钻孔工具



这种钻孔工具也可以从我们这里租用
用于安装我们的 62 毫米 IMS 套件代码：987997IMS62MM。如需租赁，请参阅其他列表。

当您购买此产品时，我们将为您提供一套全新的、未用于任何工作的工具。
如果我们发现该部件已使用过，我们将不接受退货。


有关 IMS 镗孔工具说明，请单击此处

极高流量性能的 Y 型管。

#八八八#

适合：
保时捷 997.1 Turbo 车型 2007-2009

在该产品开发过程开始时，我们花了很多时间思考构建 Y 型管道的首选方法是什么；以下就是我们的结论和开发过程的结果！

Do88 Y 型管与 OEM 管相比具有显著优势：

• 内径更大，空气流通性更好，do88高出 62% ！
• 70 毫米芯轴弯曲铝管。
• 光滑流动铸造收集器部分。
• 光滑的内部表面可实现最佳空气流通。
• 配有高品质硅胶软管和安装配件。
• 查看放大的图像以获取更多信息！

我们的管道具有极好的流速和较低的重量，这是通过将芯轴弯曲的轻质管道与它们之间的高质量 3D 自由曲面设计铸造接头相结合而实现的。然后，我们在铸造部件上焊接了 CNC 加工的 bov 和通气软管连接件。这种结构增加了许多性能，但只增加了少量的额外重量。Do88 性能 Y 型管道重量 1.52 千克（3.35 磅），OEM 塑料管道重量 1.38 千克（3.04 磅），竞争对手的铸造性能管道重量 2.76 千克（6.08 磅）！

管道随后会涂上一层高品质粉末涂层，使其外观和性能一样出色！您可以选择更隐蔽的半光泽黑色和清新的银色金属饰面。

该套件还包括 2 根高品质定制硅胶软管，有两种不同版本可供选择。您需要哪个版本取决于您是否将 Y 型管与 OEM 中冷器或 do88 性能中冷器一起安装。

在空气流动性能方面，我们的 do88 Y 型管完全胜过 OEM Y 型管，在相同压降下，流量增加 62%！在我们对这款 Y 型管与我们的中冷器在 Stage 1 调校的 997.2 Turbo PDK 上进行的最终测试中，我们测量到性能大幅提升。在所有测试中，汽车均在 Sport Plus 模式下行驶，自动换档，空调关闭。从我们在 40-270 公里/小时（25-168 英里/小时）之间连续五次全油门加速，我们获得了 50-250 公里/小时（31-155 英里/小时）范围内非常准确和一致的测试数据。在分析这些数字时，我们发现我们将 50-250 公里/小时（31-155 英里/小时）的加速时间缩短了 3 秒！

空的
超高流量性能 Y 型管

适合：保时捷 911（997.1 Turbo）车型 2007-2009

在该产品开发过程开始时，我们花了很多时间思考构建 Y 型管道的首选方法是什么；以下就是我们的结论和开发过程的结果！

Do88 Y 型管与 OEM 管相比具有显著优势：

• 内径更大，空气流通性更好，do88 高出 62%！
• 70 毫米芯轴弯曲铝管。
• 光滑流动铸造收集器部分。
• 光滑的内部表面可实现最佳空气流通。
• 配有高品质硅胶软管和安装配件。
• 查看放大的图像以获取更多信息！

我们的管道具有极好的流速和较低的重量，这是通过将芯轴弯曲的轻质管道与它们之间的高质量 3D 自由曲面设计铸造接头相结合而实现的。然后，我们在铸造部件上焊接了 CNC 加工的 bov 和通气软管连接件。这种结构增加了许多性能，但只增加了少量的额外重量。Do88 性能 Y 型管道重量 1.52 千克（3.35 磅），OEM 塑料管道重量 1.38 千克（3.04 磅），竞争对手的铸造性能管道重量 2.76 千克（6.08 磅）！

管道随后会涂上一层高品质粉末涂层，使其外观和性能一样出色！您可以选择更隐蔽的半光泽黑色和清新的银色金属饰面。

该套件还包括 2 根高品质定制硅胶软管，有两种不同版本可供选择。您需要哪个版本取决于您是否将 Y 型管与 OEM 中冷器或 do88 性能中冷器一起安装。

在空气流动性能方面，我们的 do88 Y 型管完全胜过 OEM Y 型管，在相同压降下，流量增加 62%！在我们对这款 Y 型管与我们的中冷器在 Stage 1 调校的 997.2 Turbo PDK 上进行的最终测试中，我们测量到性能大幅提升。在所有测试中，汽车均在 Sport Plus 模式下行驶，自动换档，空调关闭。从我们在 40-270 公里/小时（25-168 英里/小时）之间连续五次全油门加速中，我们获得了 50-250 公里/小时（31-155 英里/小时）范围内非常准确和一致的测试数据。在分析这些数字时，我们发现我们将 50-250 公里/小时（31-155 英里/小时）的加速时间缩短了 3 秒！

该套件中包含的部件：

• 全铝性能 Y 型管
• 硅胶软管
• 软管夹
• 如果 Y 型管与 OEM 中冷器一起安装，则需要软管接头

Rennline Carbon fibre air intake.



Fits:
Porsche 997.1 Turbo


Ever felt your 997.1 Turbo could use a bit more power?

With the Rennline Carbon Fibre Intake your drive will never feel better. This system provides improved flow dynamics that result in real-world power. Made from carbon fibre with black anodized aluminium MAF adapters and stainless steel fasteners, this Carbon Fiber intake performs as good as it looks.

Peak gains of +24 WHP/+4 ft-lbs torque on 100% Stock Vehicle (max gains of 27 WHP/22ft-lbs)

Peak gains of +9 WHP/+15 ft-lbs torque on APR ECU Upgrade with BMC air filter (max gains of 28 WHP/30 ft-lbs)

Rennline intake ducts carbon fibre. 

Fits:
Porsche 997 turbo Gen 1 - 2007 to 2009
Porsche 997 turbo Gen 2 - 2010 to 2013

Product Description

Rennline’s carbon fibre 997 Turbo intake ducts are a great way to give your 997's engine bay a modern facelift and these work in conjunction with our 997 Turbo Intake, to increase airflow and performance. 

Made from high quality carbon fibre using the latest technology, our intake ducts are designed with the dimensions of the OEM pieces for a factory fit and finish while adding a bit of style. 

Take your old plastic pieces out and install ours in their place. Installs in minutes using new factory hardware.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

M66

您正在查看的产品与这些编号存在交叉引用关系

租赁 IMS 钻孔工具用于安装 IMS 轴承



您可以从我们这里购买或租用此钻孔工具
用于安装我们的 62 毫米 IMS 套件代码：987997IMS62MM

成本
一旦工具返回给我们并经过检查，钻孔工具费用将退还。钻孔工具也可以直接购买，价格为 1895.00 英镑

有关 IMS 镗孔工具说明，请单击此处

适用于 MY97-08 发动机的旋装式机油滤清器适配器。
需要 K&N 过滤器 HP-1007

适合：

1997 年至 2008 年间的保时捷发动机

BBi Autosport under drive pulley.



Fits
Porsche 996 Turbo
Porsche 996 GT2
Porsche 996 GT3 MK1 and MK2
Porsche 996 GT3RS
Porsche 997 Gen 1 Turbo
Porsche 997 Gen 1 GT2
Porsche 997 Gen 1 GT3

Designed to slow down the power steering pump to prevent it from overheating in racing conditions, this pulley will quickly pay for itself by not just saving your pump, but also your weekend at the track.

The pulley is fully balanced and is a 16% reduction. Its weight has been optimized to be 1/2 that of any other under-drive pulley on the market today.
An additional benefit is increased power and torque across the entire RPM range.

A boss on the front of engine case will need to be cut down slightly to clear the smaller pulley size. Comes complete with the crank pulley and a new smaller belt

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

BBIPULLEY9967

您正在查看的产品与这些编号存在交叉引用关系