制动钳螺栓/制动盘螺钉

Brake Caliper Mounting Bolt. M12 x 1.5 x 77. Sold EACH
2x Bolts required per Caliper, Fits front & Rear Calipers.

Geniune Porsche product.

Fits:
Porsche 996 C4S 2002>> (FRONT & REAR)
Porsche 996 TURBO (FRONT & REAR)

Porsche 997 MKI C2S / C4S 3.8L 2005-08 (FRONT & REAR)
Porsche 997 MKII C2S / C4S 3.8L 2009>> (FRONT & REAR)

Porsche 981 Boxster 2.7L 2012>> (FRONT)
Porsche 981C Cayman 2.7L 2013>> (FRONT)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99906705009

您正在查看的产品与这些编号存在交叉引用关系

Brake Caliper Mounting Bolts. M12 x 1.5 x 72.
2 x Bolts required per Caliper. Fits FRONT & REAR Calipers.



Fits:
Porsche 993 C2 / C4 Front only (Not widebody)
Porsche 996 C2 / C4 (Not widebody)
Porsche 997 C2 / C4 3.6L 1998-05
Porsche 987C Cayman MKI & MKII 2005>>
Porsche 986 Boxster 1997-04
Porsche 987 Boxster MKI & MKII 2005>>
Porsche 981 Boxster 2012>> (REAR only)
Porsche 981C Cayman 2013>> (REAR only)
Porsche 718 Boxster (REAR only)
Porsche 718 Cayman (REAR only)

This product supersedes Porsche's old part numbers:
- 90006729209
- 99906704109
- 99906704101

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99907340201

您正在查看的产品与这些编号存在交叉引用关系

Brake caliper mounting stud kit GiroDisc
One kit per axle



Fits: - Front 340mm disc and Rear 325mm disc

Porsche 996 Carrera - 1997 to 2005
Porsche 997.1 Carrera - 2005 to 2008
Porsche 986 Boxster S - 1999 to 2004
Porsche 987 Boxster S - 2009 to 2012
Porsche 987 Cayman S / Cayman R - 2005 to 2008

Rear Only - 325mm Disc
Porsche 981 Cayman / Boxster - 2012 to 2016
Porsche 981 Cayman S / Boxster S / GTS - 2012 to 2016
Porsche 718 Cayman / Boxster 2.0ltr - 2017 Onwards
Porsche 718 Cayman / Boxster S / GTS 2.5ltr - 2017 Onwards

Girodisc caliper studs are a direct replacement for the OEM caliper bolts.

A must-have item for those who track or race their cars often. The factory bolts will quickly strip out the threads in the expensive wheel uprights, from removing the calipers for maintenance. These Cup-style caliper studs will eliminate this problem and quickly pay for themselves. They also allow for quicker and easier caliper installation by guiding the calipers into position. Manufactured from aerospace quality 17-4 PH stainless steel for high strength and corrosion resistance. One kit includes 4 studs, nuts, and washers, complete for one axle. Two kits are required for the front and rear.
These Brake caliper stud kits now include the highest quality available, ARP 12-point nuts. This is a no-compromise solution. Made from high-strength stainless steel, these nuts will not corrode, have a 180,000 PSI tensile strength, and are compact in size for a better fit in the brake caliper bore.

Please Note
If you are not familiar with, or confident that you understand how to replace the caliper bolts with studs please have a certified mechanic perform the installation.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

BCS-04

您正在查看的产品与这些编号存在交叉引用关系

Brake caliper mounting stud kit GiroDisc
One kit per axle



Fits:
Porsche 996 Carrera 4S - 2001 to 2005
Porsche 996 turbo - 2000 to 2005
Porsche 996.1 GT3 - 1999 to 2002
Porsche 997.1 Carrera S / Carrera 4S - 2005 to 2008
Porsche 981 Boxster  2.7ltr - 2012 to 2016

Porsche 981 Cayman 2.7ltr - 2013 to 2016 - 340mm front disc
Porsche 981 Boxster Spyder 3.8ltr - 2016

Girodisc caliper studs are a direct replacement for the OEM caliper bolts.

A must-have item for those who track or race their cars often. The factory bolts will quickly strip out the threads in the expensive wheel uprights, from removing the calipers for maintenance. These Cup-style caliper studs will eliminate this problem and quickly pay for themselves. They also allow for quicker and easier caliper installation by guiding the calipers into position. Manufactured from aerospace quality 17-4 PH stainless steel for high strength and corrosion resistance. One kit includes 4 studs, nuts, and washers, complete for one axle. Two kits are required for the front and rear.
These Brake caliper stud kits now include the highest quality available, ARP 12-point nuts. This is a no-compromise solution. Made from high-strength stainless steel, these nuts will not corrode, have a 180,000 PSI tensile strength, and are compact in size for a better fit in the brake caliper bore.

Please Note
If you are not familiar with, or confident that you understand how to replace the caliper bolts with studs please have a certified mechanic perform the installation.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

BCS-01

您正在查看的产品与这些编号存在交叉引用关系