后侧车顶支架
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Boxster Spyder 3.8L 2016
The compliant factory rubber bushing is replaced with a precision Teflon-lined spherical bearing for increased suspension rigidity, quicker steering response, and better handling. The spherical bearing is made to our specific specifications, and will not wear out and rattle like others on the market. The housing is CNC machined from 6061-T6 aluminum billet, providing high-strength, light weight, and a perfect match to the factory mounting surface. The spherical bearing is securely clamped into the billet housing. Other designs use a small retainer ring to trap the bearing in a bore, which could cause annoying rattling and possible failure. The spring load is distributed on the housing, not the monoball, for increased monoball life. These are the only upper mounts on the market that are fully compatible with all factory and aftermarket style upper spring seats.
Precision monoball bearing, positively clamped in position.
CNC machined housings.
No bearing noise.
Spring load distributed on housing.
Fully compatible with factory and aftermarket spring seats.
Fits
Porsche Boxster 986
Porsche Boxster 987
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
986RSMT
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
FLAT STYLE
Fits:
Porsche 986 / 987 / 981 / 982
The compliant factory rubber bushing is replaced with a precision Teflon-lined spherical bearing for quicker steering and shock response, and increased suspension precision resulting in better handling. The spherical bearing is made to our specific specifications, and will not wear out and rattle like others on the market. The housing is CNC machined from 6061-T6 aluminum billet, providing high strength, light weight, and a perfect match to the factory mounting surface. The spherical bearing is securely clamped into the billet housing. Other designs use a small retainer ring to trap the bearing in a bore, which tend to cause annoying rattling and possible failure.
Available in two styles, domed and flat.
• The domed style is designed to replace the OEM mount and is compatible with any strut designed for use with the OEM mount. This would include Bilstein and KW among others. The spring load is distributed on the housing, not the monoball, for increased monoball life. These are the only upper mounts on the market that are fully compatible with all factory and aftermarket style upper spring seats.
• The flat mounts are designed for use with race style struts that are intended to be used with a flat mount. This would include JRZ, Moton, MCS, and AST among others.
Note: that the two are not interchangeable. Please consult Tarett Engineering if you are unsure which is appropriate for your application.
• Precision monoball bearing, positively clamped in position.
• CNC machined housing.
• No bearing noise.
• Spring load distributed on housing
• Fully compatible with factory and aftermarket spring seats.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
98XRSMT
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Boxster Spyder 3.8L 2016
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp)
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp)
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
Fits:
Porsche 986 Boxster
Porsche 987.1 Boxster
Porsche 987.2 Boxster
Porsche 987C.1 Cayman
Porsche 987C.2 Cayman
Ultimate replacement for factory rubber bush mount. Compatible with OE and aftermarket struts.
CNC machined 6061 anodized aluminum construction with stainless steel hardware.
Reduces rear wheel camber changes during hard cornering to maintain optimum tire contact for improved traction.
Increased monoball life due to spring load being distributed over the domed housing.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
360250986R
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
1 kit required per axle
Fits
Porsche 986 Boxster - Front and Rear
Porsche 987 Boxster - Front and Rear
Porsche 987 Cayman - Front and Rear
Porsche 996 - Front Only
Porsche 997 - Front Only
Cartridges install easily to replace rubber bushings for 996/997/Boxster/Cayman. An excellent alternative to our QuickChange Camber Plates for cars that don't need more camber but still want the handling precision of a spherical bearing monoball. Spherical bearings improve performance. The spherical bearings pivot freely, but eliminate the deflection that is inherent with the factory rubber bushings.
Eliminating Deflection Is Important For Two Reasons
• The factory rubber acts as a spring in series with the strut. This rubber spring-action is completely un-damped and reduces the struts ability to control the tire contact patch. The spherical bearing allows the strut damper to do its job and control the contact patch.
• The factory rubber deflects sideways under cornering loads, causing loss of camber just when you need it most. Our spherical bearings eliminate the deflection, maintaining stable and predictable camber.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
2011002
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
使用高性能后顶置支架增强您的保时捷后悬架:技术规格和优势
高性能后悬架顶部支架的技术规格:
- 性能后悬架上支架(也称为支柱支架或轴承板)是将后悬架支柱连接到保时捷底盘的部件。
- 它们是专为保时捷汽车的后悬架系统设计的。
- 性能后顶支架由铝合金或增强橡胶等高品质材料制成。
- 与标准支架相比,它们具有更坚固的结构和改进的设计,从而提供了增强的性能、耐用性和操控特性。
- 高性能后悬架上支架可作为保时捷车辆的售后升级或标准替换件。
升级或更换保时捷性能后悬架顶部支架的好处:
改进的后悬架性能:性能后上支架提供了更高的刚性和精度,增强了后悬架在转弯、加速和制动时的性能和响应能力。
增强的稳定性和控制力:升级到性能支架可提高后悬架的整体稳定性和控制力,提供更自信、更沉着的驾驶体验。
降低噪音、振动和声振粗糙度 (NVH):更坚固的后顶部支架有助于最大限度地减少传输到底盘的不必要的振动和噪音,从而带来更平稳、更舒适的乘坐体验。
精确的校准调整:性能后顶部支架可进行精确的校准调整,优化后悬架几何结构,从而改善轮胎磨损、牵引力和转弯性能。
提高耐用性:高性能后顶支架旨在承受更高的负载,与标准支架相比,具有更高的耐用性,即使在苛刻的驾驶条件下也能确保长使用寿命。
在 Design911,我们专门为您的保时捷提供合适的零件和专业建议。我们提供专为保时捷车型设计的各种高性能后悬架上支架,包括售后升级和 OEM 更换。我们知识渊博的团队可以根据您的保时捷车型、年份和特定的后悬架要求帮助您选择合适的后悬架上支架。我们了解在性能和舒适性之间找到适当平衡的重要性,我们可以指导您选择最适合您需求的最佳上支架。凭借我们的专业知识和对客户满意度的承诺,我们可以帮助您提高保时捷后悬架的性能、操控性和整体驾驶体验。立即联系我们,享受我们的全面支持并获得根据您的要求量身定制的高质量零件。
- 支撑架
- 防侧翻稳定杆
- 运动弹簧
- 前控制臂
- 后控制臂
- 前悬挂连接杆
- 后悬挂连接杆
- 发动机支架
- 变速箱座
- 前侧车顶支架
- 转向横拉杆
- 后副车架
- 气动升降系统
- 悬架控制单元
- 防翻架
- DesignTek D220 避震悬架套件
- Bilstein B4 标准替换件
- Bilstein B4(带 PASM 按钮的车辆)
- Bilstein SPORT B6 减震器
- Bilstein SPORT B6(带 PASM 按钮的车辆)
- Bilstein SPRINT B8 减震器
- Bilstein SPRINT B8(带 PASM 按钮的车辆)
- Bilstein B12 调校悬架套件
- Bilstein B14 PSS 避震悬架套件
- Bilstein B16 PSS9/10 高度减震可调避震悬架套件
- Bilstein B16 DampTronic (PASM)
- Bilstein EVO SE
- Ohlins 道路及赛道悬架
- Koni 运动系列
- Koni Special Active 系列
- SuperPro 聚氨酯衬套
- Powerflex 聚氨酯衬套
- Powerflex 黑色系列衬套
- H&R 可调悬架套件
- H&R Cup-Kit 系列运动悬架
- KW 高度可调弹簧
- KW 变体 1 Inox 悬架套件
- KW 变体 2 Inox 可调回弹减震悬架
- KW 变体 3 Inox 可调悬架套件
- KW Clubsport 避震悬架套件
- KW Clubsport 避震悬架套件(带车顶支架)
- KW HLS(液压升降系统)
- 保时捷套件
- KYB 悬架
- Sachs 高性能悬架 CSS
- Nitron 汽车系列