Engine Modifications & Upgrades

The 987.2 Competition 82mm IPD Plenum requires the additional purchase of the 997 GT3 82mm Throttle Body



The IPD 987.2 Boxster "Competition" Plenum was designed to meet the needs of the most demanding Boxster S enthusiasts. The "Competition" Plenums is internally larger and specifically designed to utilized the larger 82mm 997 GT3 throttle body. This new 987.2 Competition Plenum follows in the foot steps of the very successful 987.1 Competition Plenum, which has proven itself to be the absolute single best performance mod that can be installed on any 987.1. The combination of the patented IPD "Y" designed Plenum and Porsche's largest TB yield great performance gains that can be seen and felt throughout the entire power band.

The "Competition" version was designed and developed to work with Boxster S's equipped with high quality high-flow aftermarket cat-back exhausts. The addition of headers and high-flow cats will only further compliment the dramatic increases with intake air flow delivered by the IPD Plenum.

Performance gains take place throughout both horsepower and torque curves but are most realized through the mid-range and well into peak power range. This system develops up to 20+ HP on Boxster already equipped with aftermarket cat-back exhausts. Once installed, the 987.2 Boxster Competition Plenum will truly transform your Porsche Boxster driving experience.

Fits:
Porsche 987 GEN2 Cayman S 3.4L DFI
Porsche 987 GEN2 Boxster S 3.4L DFI

This Plenum requires the additional purchase of the 99760511601 82mm Throttle Body

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

87482

您正在查看的产品与这些编号存在交叉引用关系

Aluminum Intake Plenum 74mm
Some early models up to 2006 have a 68mm throttle body so you might need to buy a 74mm throttle body part code 99760511501

Fits:
Porsche 987 GEN1 Cayman S 3.4L
Porsche 987 GEN1 Boxster S 3.4L
Porsche 987 GEN1 Cayman 2.7L
Porsche 987 GEN1 Boxster 2.7L

The perfectly balanced mid engine Cayman/Boxster is Germany's canyon carving track meister. Unfortunately, the Cayman/Boxster was delivered slightly under powered from the factory so as not to threaten the Carrera's thrown. The Cayman/Boxster IPD intake plenum delivers increased performance that puts the Cayman/Boxster in the ring with the Carrera.

The IPD Plenum out performs every other intake system on the market. Don't be fooled by other competitors claiming to offer Plenums. All factory Porsche air distributors are of the "T" variety and therefore suffer from less than ideal air flow and intake air speed.

The genius and power behind the IPD plenums comes from the patented "Y" style design and optimized diversion areas to deliver real and impressive power that will transform your Cayman's/Boxster's performance and heighten your Porsche driving experience.

The Cayman/Boxster IPD Intake Plenums are available in 3 versions, each one specifically designed to meet the performance requirements of varying Cayman/Boxster enthusiasts. IPD offers the ultimate Cayman/Boxster performance upgrades, all the way from mild to wild.

The 74mm Cayman/Boxster S Plenum utilizes the factory 74mm throttle body. This version provides impressive power gains throughout the entire power band, especially in the midrange where it's most critical and most enjoyed.

The 74mm Cayman/Boxster S Plenum application is recommended for Cayman/Boxster S enthusiasts looking for considerable performance gains without pushing the performance envelope. Max horsepower is 14 and max torque is 12 which all comes in around 5600 RPM. Power gains are realized throughout the entire power band without any loses in power.

The IPD Cayman/Boxster S Plenum will provides the most impressive power gains of any engine upgrade available and will truly transform your Cayman/Boxster driving experience. The 74mm IPD Plenum is the best Cayman/Boxster modification on the market and will further compliment other mods such as exhaust, software and beyond.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

87174

您正在查看的产品与这些编号存在交叉引用关系

Fits:
Porsche 987 GEN1 Cayman S 3.4L
Porsche 987 GEN1 Boxster S 3.4L

987 Competition Cayman 3.4L Plenum: HP Gains 20+ / Torque Gains 18 Requires upgrading factory 74mm Throttle Body with 997 GT3 82mm Throttle Body

Recommended to be installed on modified Caymans with Hi-Flow Cat back exhaust

The perfectly balanced mid engine Cayman/Boxster is Germany's canyon carving track meister. Unfortunately, the Cayman/Boxster was delivered slightly under powered from the factory so as not to threaten the Carrera's thrown. The Cayman IPD intake plenum delivers increased performance that puts the Cayman/Boxster in the ring with the Carrera.

The IPD Plenum out performs every other intake system on the market. Don't be fooled by other competitors claiming to offer Plenums. All factory Porsche air distributors are of the "T" variety and therefore suffer from less than ideal air flow and intake air speed.

The genius and power behind the IPD plenums comes from the patented "Y" style design and optimized diversion areas to deliver real and impressive power that will transform your Cayman's/Boxster's performance and heighten your Porsche driving experience.

The Cayman/Boxster IPD Intake Plenums are available in 3 versions, each one specifically designed to meet the performance requirements of varying Cayman/Boxster enthusiasts. IPD offers the ultimate Cayman/Boxster performance upgrades, all the way from mild to wild.

The IPD Cayman/Boxster "Competition" Plenum was designed to meet the needs of the most demanding Cayman/Boxster S enthusiasts. The "Competition" Plenums is even larger and utilizes the 997 GT3 82mm throttle body allowing it to deliver even greater air flow and substantial increases in performance.

The "Competition" version is designed to work with both bone stock Caymans/Boxsters but produces even more horsepower gains (20+) with Caymans/Boxsters already equipped with after market "cat back" high flow performance exhaust and other performance mods.

IPD 铝制进气歧管。



适合：
保时捷 981 Cayman 3.4L / S / GTS / GT4 3.8L DFI
保时捷 981 Cayman DFI 2.7L
保时捷 981 Boxster/S/GTS/Spyder DFI 3.4L
保时捷 981 Boxster DFI 2.7L

经过非常广泛的研发计划，我们很自豪地推出了新款 981 IPD 82mm 竞赛增压器。我们只提供 981 增压器的“竞赛”版本，该版本将工厂 74mm 节气门体升级为更大的 997 GT3 82mm 节气门体。事实证明，这种组合更受欢迎，性能也更高。此竞赛版本适用于 3.4L“S”和 2.7L“非 S”应用。

981 进气口与 987.2 进气口几乎完全相同。保时捷对 981 进行了一些升级，最值得注意的是 981 从驾驶员和乘客进气口吸入外部空气，而不是像之前所有 986、987 和 987.2 应用程序那样只从驾驶员侧吸入。IPD 包含一个定制硅胶软管，旨在完美适配更大的 82 毫米 TB 并显著改善空气流动。

新的 981 增压室也受益于我们目前在所有未来增压室上实施的内部凹陷效应。这种内部凹陷使我们能够控制边界层并最大限度地提高气流。就像有凹陷的高尔夫球比光滑的高尔夫球飞得更远一样。受控湍流空气产生的摩擦更小，并且更有效地在给定区域“翻滚”。

981 竞赛增压室的功率增益与 987.2 竞赛增压室几乎相同，在车轮上产生 20 马力和 16 英尺磅的扭矩。IPD 增压室的大部分功率增益从 4000 rpm 左右开始，一直持续到红线，并在 6000 rpm 范围内完全实现。在整个转速范围内，IPD 性能增益始终高于两个工厂功率曲线

需要 997 GT3 82 毫米节气门体

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

81482

您正在查看的产品与这些编号存在交叉引用关系

保时捷的全新 DFI（直接燃油喷射）进气系统是经过完全重新设计的进气系统，通过直接优化燃烧室内的空气燃油混合物来提高性能、燃油消耗和排放。



DFI 保时捷发动机套件是一款经过精细调校的性能机器，事实证明很难找到额外的动力。保时捷新 DFI 进气系统的独特设计带来了非常具有挑战性的调校障碍，但 IPD 再次开发出一种设计，其性能优于工厂进气系统，同时又不影响可靠性和驾驶性能。

这种创新和革命性的 IPD DFI 进气集气室采用获得专利的“Y”形设计以及扩大的集气室面积，可以提高进气速度和空气流速，从而提高性能而不会造成任何功率损失。

全新专门设计的 IPD 3.4L DFI Cayman/Boxster Plenum 是一种直接螺栓升级，可取代工厂集气室并利用所有预先存在的工厂硬件，包括 OE 工厂节气门体。

改进的 IPD 进气设计可实现更平稳、更少湍流和更高效的气流，更高的进气速度可产生令人印象深刻的功率和扭矩增益。

DFI IPD 增压室的卓越设计为车轮提供了额外的 12-14 马力。与之前自然吸气 IPD 增压室在中档范围内提供更强增益不同，新的 IPD DFI 增压室提供与工厂相似的功率曲线，但从中档到红线范围的功率要强得多。

低转速范围内的功率输出与保时捷原厂输出一致，没有损失。功率和扭矩在中档范围内实现，并继续攀升至原厂功率输出以上，直至红线。

新款 IPD 3.4L DFI Plenum 的安装相对简单，可由机械倾向的 DIY 客户安装，但 IPD 强烈建议由经过培训且合格的保时捷技术人员进行安装。

适合：
保时捷 987 GEN2 Cayman S 3.4L DFI
保时捷 987 GEN2 Boxster S 3.4L DFI
保时捷 987 GEN2 Cayman 2.9L DFI
保时捷 987 GEN2 Boxster 2.9L DFI

Brey Krause Deep Sump Kit.

 

For Boxster 986, 987 and 996, 997 Non-Turbo Models through 2008

Scavenging and aeration in the oil pan have been identified as a problem in 996/997, Boxster, and Cayman models experiencing high G-forces on the racetrack. The R-9095 oil pan spacer provides a simple solution. This spacer increases sump capacity by half a quart, providing more reserve to ward off starvation. The R-9095 is approved by the Porsche Club of America for use in PCA club racing Stock and Prepared class cars. The R-9095 kit clears all factory options including the rear skid plate. Added oil capacities as well as increased oil pan surface area increase oil cooling and engine performance.

*Note: Oil pan and sump baffle are OEM parts and do not need to be purchased. Baffle spacer and pick-up tube spacer are included in this kit.

Material: 6061 T6 Aluminum Alloy
Finish: Clear Anodized
Weight: N/A
Models: Boxster, Boxster S, 996/997 models (excludes GT3 and turbocharged models) and Cayman through 2008.
Installation: For best results internal baffle passages should be modified. Modification instructions included in the kit.
Miscellaneous: Spacer adds .5 U.S. quarts to oil pan volume and improves internal baffling system. Extension bolts, baffle spacer and pick-up tube spacer included in the kit.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

R-9095

您正在查看的产品与这些编号存在交叉引用关系

2 Quart (1.89 Litre) Deep Sump Track Oil Pan Kit.
Models: Boxster, Cayman, 996 and 997 models (excludes GT3 and turbocharged models).



This kit is best used on track only vehicles as ground clearance will become an issue due to the extension.

Scavenging and aeration in the oil pan have been identified as a problem in the 996, 997 and Boxster models that experience high G-forces on the racetrack. Motorsports 2 Quart Deep Sump Oil Pan Kit for all 986/996/987/997 Porsche's (excluding GT3, GT2 Turbo and DFI models). This deep sump kit is an extension added to the original oil pan, increasing oil capacity by 2 quarts, helping with oil starvation problems these vehicles commonly have.

Kit Includes:
- 2Quart Pan Extension
- Oil pickup spacer
- Extended Hexagon Head Bolts (x15)
- Aluminium spacers for baffle (x3)
- Stainless oil trap
Please order extra
1 x 703141410 Reinzosil Universal Sealing Compound
2 x 99710701600 Oil tubes

Fits:
Porsche Boxster 986 / 987
Porsche 996
Porsche 997
Porsche Cayman
Please note: This kit will not fit 996 Turbo / 996 GT2 / 996 GT3 / 997 Turbo / 997 GT2 / 997 GT3

For Installation Instructions CLICK HERE

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

996107032XX

您正在查看的产品与这些编号存在交叉引用关系

Drive Belt for Motorsport Under Drive Pully cars WITH Aircon. Porsche 996/ Boxster 986/997

What size serpentine belt to run when using an under drive pulley?

The stock serpentine belt length for a 986 Porsche Boxster or Porsche 996 with air conditioning is 2115mm Porsche part # 996 102 151 64. If you remove the air conditioning but keep the stock drive pulley you will need a new serpentine belt that is 1930mm in length. If you then decide to add an underdrive pulley in the range of 4.25 to 5 inches in diameter you will need a belt 1905mm in length. For those of you who would like to add an under drive pulley with air conditioning, the proper length is 2101mm.

So in review:
Stock pulley w/ air conditioning - 2115mm
Under drive pulley w/ air conditioning - 2100mm

Fits:
Porsche 996 3.4L
Porsche 996 3.6L
Porsche 997 3.6L
Porsche Boxster 986
Porsche Boxster 987 MKI
Porsche Cayman 987C MKI

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99610215199

您正在查看的产品与这些编号存在交叉引用关系

Engine mount with HD 95A shore rating bush 



Fits:
Porsche 986 Boxster 1997-04
Porsche 987.1 Boxster 2005-08
Porsche 987C.1 Cayman 2006-08

This product replaces:

98737502304, 98737502305, 98637502307 

Click 'Zoom in' for large parts diagram.
Diagram Ref No 2.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3609309871

您正在查看的产品与这些编号存在交叉引用关系

Engine mount with HD polyurethane bush



Fits:
Porsche 986 Boxster 1997-04
Porsche 987.1 Boxster 2005-08
Porsche 987C.1 Cayman 2006-08

This product replaces:

98737502304, 98737502305, 98637502307 

Click 'Zoom in' for large parts diagram.
Diagram Ref No 2.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3609309872

您正在查看的产品与这些编号存在交叉引用关系

Harmonically damped underdrive pulley. Dampens/reduces internal engine harmonics for improved engine performance, efficiency and longevity. 
replacement for OE 99710224101


Fits on all Porsche 986, 996, 987, 997 models EXCEPT 2.9L (multi hole crank pulley pattern), DFI engines, GT2, GT3 and Turbo.

Increase your engine output by reducing the draw of the engine's ancillaries ie the power steering pump, Air Conditioning, water pump and alternator by slowing them down and reducing the horsepower they use.

Underdrive pulley is one of the cheapest returns for the money spent when it comes to actual performance and horsepower gains for track and street use cars.

Installation tool (wrench) included, new OEM crankshaft pulley bolt is recommended but not included with this product.

Please add Drive Belt for Under Drive Pully cars WITH Aircon Porsche 996/ Boxster 986/997 99610215199/1

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3609001608

您正在查看的产品与这些编号存在交叉引用关系

HPDE 2 Quart Accusump Universal Kit.

Fits:
Porsche 986 Boxster 1997-04
Porsche 996 Carrera 1998-04
Porsche 987 Boxster 2005-08
Porsche 987 Cayman 2005-08
Porsche 997 2005-08

The Accusump is designed collect pressurized oil from your engine and store it so it may be discharged later during low oil pressure surges to protect against engine damage during demanding racing conditions. After the oil pressure stabilizes, the piston inside the Accusump moves back and forth, pressurizing the Accusump until it equalizes with engine's oil pressure. The Electric Pressure Control Valve we use is for a discharge/refill of 35-40 PSI. These valves have the convenience of an electric valve for remote mounted units on daily drivers but with the rapid refill rate of a manual valve as required in racing. The E.P.C. valving will only allow the Accusump to discharge oil when the engine's oil pressure drops below a predetermined level and only refill when the pressure rises above that level.

The LN Engineering HPDE Accusump kit is easy to install, requiring plumbing of only a single oil line. Our universal Accusump kit has everything you need to carry out a custom Accusump installation in your Boxster, Cayman, or 911, sans wiring or electrical pieces and includes a two quart Marine Accusump system including LN Engineering's Spin-On Full-Flow Oil Filter Adapter, single input sandwich adapter (for easy one-line installation - fits between filter and LN spin on filter adapter), the LN Engineering Billet Washable High Performance Oil Filter, 45 psi electronic valve, hose, and fittings. In conjunction with the installation of an Accusump, we recommend adding an X51 oil baffle and 997 oil return tubes for improved oil control and ensure scavenge oil is returned to the sump as quickly as possible. For installation support and for troubleshooting technical issues with your Accusump, please contact Canton directly.

NO WARRANTY, RETURNS, OR EXCHANGES ON ACCUSUMP KITS!

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

106-12.1

您正在查看的产品与这些编号存在交叉引用关系

IMS Intermediate Shaft Bearing Upgrade Eternal Fix -58MM FLANGE - OPEN ENGINES (while doing an engine rebuild)



Fits:
Porsche 997 2005-08
Porsche Boxster 987
Porsche Cayman 987
(Not for M96 Engines)

Porsche Ims Intermediate Shaft Bearing Upgrade - Eternal Fix with Oil Pressure Feed - 58 MM - Open Engine Permanently Fix Your Intermediate Shaft With The Eternal Fix! Unlike Failure Prone Ball Bearings, Eps Uses A Patented Cylindrical Bearing With Thrust Control.
Prevent future catastrophic engine failure permanently with the only true Eternal Fix for the notorious Porsche intermediate shaft bearing. Unlike the other failure-prone ball bearing products that the original IMS and other upgrades on the market use, EPS uses a patented cylindrical bearing with thrust control that can be pressed directly into the back of the engine without disassembly. The cylindrical bearings have over 12 times the load capacity of other ball bearing solutions making the EPS IMS bearing the clear choice. Backed by a full 5-year warranty and includes an oil feed modification kit. Order yours today!

WHAT MAKES OUR SOLUTION DIFFERENT?

Roller bearings are not intended for carrying large axial loads. Similar to failure-prone ball bearings, when cylindrical roller bearings are used for thrust control, the roller becomes compromised due to the limited surface contact area on the sides of the rollers. The results of using a cylindrical bearing for thrust control will be similar to all other ball bearing solutions.

In our patented system, we use a 15mm cylindrical bearing with thrust control that allows for the separation of the axial load from the radial load. Our roller bearings do NOT carry the axis load (thrust control) on the side, which leaves the roller free to carry only the radial load (main load). The axial load is carried exclusively on the entire permitter of the outer race. This results in a bearing that is not overloaded and will last the lifetime of the engine.

EPS recommends using this product in conjunction to the Rear Main #8 Seal and Housing

IMS Intermediate Shaft Bearing Upgrade Eternal Fix -62MM FLANGE - CLOSED ENGINES (MUST USE OUR BORING TOOL IN ORDER TO INSTALL)
the boring tool can be purchased or rented from us
Code: 987997IMSTOOL

Fits:
Porsche 997 2005-08
Porsche Boxster 987
Porsche Cayman 987
(Not for M96 Engines)

Porsche Ims Intermediate Shaft Bearing Upgrade - Eternal Fix with Oil Pressure Feed - 62 MM - Closed Engine Permanently Fix Your Intermediate Shaft With The Eternal Fix! Unlike Failure Prone Ball Bearings, Eps Uses A Patented Cylindrical Bearing With Thrust Control.
Prevent future catastrophic engine failure permanently with the only true Eternal Fix for the notorious Porsche intermediate shaft bearing. Unlike the other failure-prone ball bearing products that the original IMS and other upgrades on the market use, EPS uses a patented cylindrical bearing with thrust control that can be pressed directly into the back of the engine without disassembly. The cylindrical bearings have over 12 times the load capacity of other ball bearing solutions making the EPS IMS bearing the clear choice. Backed by a full 5-year warranty and includes an oil feed modification kit. Order yours today!

WHAT MAKES OUR SOLUTION DIFFERENT?

Roller bearings are not intended for carrying large axial loads. Similar to failure-prone ball bearings, when cylindrical roller bearings are used for thrust control, the roller becomes compromised due to the limited surface contact area on the sides of the rollers. The results of using a cylindrical bearing for thrust control will be similar to all other ball bearing solutions.

In our patented system, we use a 15mm cylindrical bearing with thrust control that allows for the separation of the axial load from the radial load. Our roller bearings do NOT carry the axis load (thrust control) on the side, which leaves the roller free to carry only the radial load (main load). The axial load is carried exclusively on the entire permitter of the outer race. This results in a bearing that is not overloaded and will last the lifetime of the engine.

EPS recommends using this product in conjunction to the Rear Main #8 Seal and Housing

中间轴 (IMS) 轴承套件 - 适用于保时捷

8102 专为快速安全地拆卸和更换 M96 和 M97 发动机上的保时捷 IMS（中间轴）轴承而开发，该发动机适用于 1999 年至 2008 年所有水冷 911、Boxster 和 Cayman 车型。配有凸轮轴和曲轴正时工具。

保时捷应用：911，Boxster，开曼（1999 - 2008）。
发动机代号应用包括：M96、M97。
套件包括适用于早期和晚期发动机的凸轮轴和曲轴锁定工具。
提供了 2 种拆卸轴承的方法。按照 OEM 说明安装轴承。
谢菲尔德制造。重要提示：使用前确保力螺钉已用二硫化钼润滑脂充分润滑。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

8102

您正在查看的产品与这些编号存在交叉引用关系

IMS Tool Kit by EPS



Bearing puller and adapter for extracting the existing bearing from the original center stud/bearing support (shown above)
Bearing driver tool to allow easy installation of the new bearing (shown above)
"Easy Out" adapter to allow extraction of bearing using the EPS bearing puller when and if the center stud/bearing support is broken or breaks during extraction
Crankshaft Pully TDC Lock Pin to secure the engine at the proper position to do an IMS Retrofit
Camshaft locks for both early 5-chain and later 3-chain engines (kit includes one ea.)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99610590102TOOL

您正在查看的产品与这些编号存在交叉引用关系

Magnetic oil drain plug, with a seal ring (washer).
Hard Anodized Aluminum, with magnet, 18 x 1.5mm



Fits:
Porsche 996 1997-04
Porsche 997 2005-08
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005-08
Porsche 987C Cayman 2005-08

A magnetic sump oil drain plug is a type of oil drain plug that contains a small magnet designed to attract and capture metallic particles that may be present in your engine's oil. While this type of drain plug is not exclusive to Porsche and can be used in various vehicles, it can provide several benefits, including:

Improved Engine Longevity: The magnet in the drain plug helps to capture tiny metal particles, such as iron, steel, or aluminum, that may circulate in the engine oil. Removing these particles can reduce wear and tear on engine components, potentially extending the engine's lifespan.

Enhanced Engine Performance: By reducing the presence of contaminants in the oil, a magnetic drain plug can help maintain the oil's lubricating properties, which is crucial for smooth engine operation. Clean oil can also contribute to improved fuel efficiency.

Early Detection of Problems: As the magnetic drain plug collects metallic debris, it can serve as an early warning system. By inspecting the drain plug during oil changes, you can get an idea of the engine's condition and detect any unusual wear or damage before it becomes a major issue.

Reduced Maintenance Costs: Regularly inspecting and cleaning a magnetic drain plug can prevent larger issues from developing over time. Addressing potential problems early can save you money on more extensive repairs down the road.

Peace of Mind: Knowing that you are taking steps to protect your engine from premature wear and tear can give you peace of mind as a vehicle owner. It's a relatively inexpensive and simple modification that can provide added assurance.

Easy Installation: Magnetic drain plugs are typically straightforward to install. They often replace the existing drain plug and require no special tools or modifications.

While magnetic drain plugs can offer these benefits, it's essential to remember that they are not a substitute for regular oil changes and proper maintenance. Regular oil changes with the appropriate oil and filter are still crucial for the health and longevity of your engine. Additionally, magnetic drain plugs may not capture all types of contaminants, so they should be seen as a supplementary measure rather than a comprehensive solution.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90021900930

您正在查看的产品与这些编号存在交叉引用关系

旋装式机油滤清器

适合：

保时捷 986/987 以及 996/997 车型，可替换保时捷零件号 996 107 020 53（54、55）。适用于发动机型号为 M96 或 M97 的 MY97-08 车辆。
不适合 GT2、GT3 或 Turbo 型号或任何风冷型号。仅针对配备 M96/M97 发动机的 MY97-08 车辆设计。

保时捷 987.2 MY09+ Boxster 和 Cayman 车型

保时捷 955 Cayenne S V8 和 955 Cayenne Turbo MY03-06

Oil Filter Spin-on Type (Short type)

Fits:

Porsche 986/987 as well as 996/997 models and replaces Porsche part numbers 996 107 020 53 (54, 55). For MY97-08 vehicles with M96 or M97 engine designation.
Does not fit GT2, GT3, or Turbo models or any aircooled models. Design only for MY97-08 vehicles with an M96/M97 engine.

Porsche 987.2 MY09+ Boxster and Cayman models

Porsche 955 Cayenne S V8 and 955 Cayenne Turbo MY03-06

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

OC1051

您正在查看的产品与这些编号存在交叉引用关系

Outright IMS Boring Tool for Installing IMS Bearing



This boring tool can be also be rented from us
for installing our 62mm IMS kit Code: 987997IMS62MM. For rental please see other listings.

When you purchase this product you will be supplied with brand new set of tools that haven't been used on any jobs.
We will not accept a return of this part if we find out that it is in used condition.


For IMS Boring Tool instructions please CLICK HERE

SET OF 2 , Fast Road Performance gearbox / transmission Mounts. Semi-Solid Design.



Fits:
Porsche 986 Boxster
Porsche 987 Boxster
Porsche 987 Cayman

Simple and easy upgrade to failing OE transmission mounts. Perfectly balanced without compromising on the comfort and noise in the cabin.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3609309627

您正在查看的产品与这些编号存在交叉引用关系

Rental IMS Boring Tool for Installing IMS Bearing



This boring tool can be purchased or rented from us
for installing our 62mm IMS kit Code: 987997IMS62MM

Costs
The boring tool cost will be refunded once the tool is returned to us and checked. The boring tool can also be purchased outright for £1895.00

For IMS Boring Tool instructions please CLICK HERE

RSS Tarmac Series Performance Transmission Mounts are on the 2015 PIRELLI WORLD CHALLENGE TC CHAMPIONSHIP Cayman!



SET OF 2

AVAILABLE FOR
Porsche 986 Boxster and 987 Boxster / 987 Cayman
FITS MODEL VARIANTS INCLUDING MK.1 & MK.2 with 6 Speed Manual or PDK Transmission.


• The RSS Tarmac Series Performance Transmission Mounts are designed for the Porsche driver who demands the absolute maximum in precision handling, feedback and control from their chassis.

• With factory Transmission mounts, the drivetrain will move independent of the chassis during acceleration, deceleration and cornering loads. This movement can upset the balance of the vehicle and create negative handling effects.

• RSS Performance Transmission mounts minimize these effects by utilizing specialized polyurethane bushings which offer a firmer, more direct driving feel with optimum feedback.

• This upgrade will NOT significantly affect ride quality or cause knock sensor issues commonly associated with solid transmission mounts.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

627

您正在查看的产品与这些编号存在交叉引用关系

Underdrive pulley.
replacement for OE 99710224101



Fits on all Porsche 986, 996, 987, 997 models EXCEPT 2.9L (multi hole crank pulley pattern), DFI engines, GT2, GT3 and Turbo.

The RSS Harmonically Damped Underdrive Pulley is ideal for engines that are running light weight flywheels, engines that are built - bored/stroked and engines that are driven hard.

• Offers improved HP & TQ by reducing drag from the power steering pump, A/C, water pump and alternator without detrimental effects on said ancillary systems.
• Dampens/reduces internal engine harmonics for improved engine performance, efficiency and longevity.
• Recommended for street or track use

Installation tool (wrench) and new OEM Pulley Washer included:

Dyno Image shows HP & TQ gain on 2005 997.1 Carrera S:
Baseline Dyno Run Mods: OEM Crank Pulley, OEM Software, Cargraphic Headers, Hi flow 200 Cell Cats, and Medium Sound Cargraphic Sport Mufflers
Modified Dyno Run: Added RSS Pulley (Part #608) to baseline car with existing mods:
+16 HP / +8 ft lbs TQ

*** NOTE: We recommend using/sourcing a new OEM Crank Shaft Pulley Bolt for your specific vehicle when installing the RSS Pulley. (Not Included with 608 Kit)
Please add Drive Belt for Under Drive Pully cars WITH Aircon Porsche 996/ Boxster 986/997 99610215199/1

MADE IN USA

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

608

您正在查看的产品与这些编号存在交叉引用关系