后扰流板/翼型件
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
With TÜV parts certificate (§19.3).
Fits:
Porsche 997.1 Turbo models
The 991.1 Turbo Downforce RS Aero Kit ensures the best possible aerodynamic properties and is at the same time a beautiful oem+ design element that gives your Porsche a unique appearance.
It consists of:
1 x Front spoiler evo2 | P991.20.1022
1 x Side skirts | P991.22.2020
1 x Rear spoiler extension | P991.20.3020
1 x Ram Air Scoops | P991.20.2025
1 x Rear diffuser | P991.20.3040
This Downforce aero kit is delivered primed & paint ready. Mounting material is included.
Please note this item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
P991.20.7000
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
With TÜV parts certificate (§19.3).
Fits:
Porsche 991.2 Carrera models with standard bumpers, PSE and narrow body
The 991.2 touring evo Aero Kit ensures the best possible aerodynamic properties and is at the same time a beautiful oem+ design element that gives your Porsche a unique appearance.
The kit consists of:
1x Front spoiler evo | P991.42.1020
1x Ducktail evo | P991.42.3022
1x Diffuser | P991.42.3040
This Touring EVO aero kit is delivered primed & paint ready. Mounting material is included.
Please note this item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
P991.42.7002
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
With TÜV parts certificate (§19.3).
Fits:
Porsche 991.2 Carrera 4 models with standard bumpers, PSE and wide body!
The 991.2 touring evo Aero Kit ensures the best possible aerodynamic properties and is at the same time a beautiful oem+ design element that gives your Porsche a unique appearance.
The kit consists of:
1x Front spoiler evo | P991.42.1020
1x Side skirts | P991.40.2020
1x Ducktail evo | P991.42.3022
1x Diffuser | P991.42.3040
This Touring EVO aero kit is delivered primed & paint ready. Mounting material is included.
Please note this item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
P991.42.7000
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
With TÜV parts certificate (§19.3).
Fits:
Porsche 991.2 Carrera GTS models with standard bumpers, PSE and wide body!
The 991.2 touring evo gts Aero Kit ensures the best possible aerodynamic properties and is at the same time a beautiful oem+ design element that gives your Porsche a unique appearance.
The kit consists of:
1x Front spoiler evo (GTS)| P991.42.1022
1x Side skirts | P991.40.2020
1x Ducktail evo | P991.42.3022
1x Diffuser | P991.42.3040
This Touring EVO aero kit is delivered primed & paint ready. Mounting material is included.
Please note this item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
P991.42.8000
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
Fits:
Porsche 991.2 C2 / C2S 2017>>
Porsche 991.2 C4 / C4S 2017>>
Porsche 991.2 Targa / Targa S 2017>>
Porsche 991.2 Carrera T 2017>>
Options:
- For vehicles without headlight cleaning system and without front or rear ParkAssist
- For vehicles with headlight cleaning system and without front or rear ParkAssist
- For vehicles without headlight cleaning system and with front and rear ParkAssist
- For vehicles with headlight cleaning system and with front and rear ParkAssist
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
9910448037
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
Fits:
Porsche 991 GT3 2018>>
Click 'Zoom in' for large parts diagram.
Diagram ref no 3
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99151256
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
For vehicles with painted side skirts and/or painted rear apron. Add-on kit includes new front spoiler with side fins, new fixed rear spoiler with new automatically extending rear wing, can be painted in exterior colour.
Fits:
Porsche 911 (991.2) Turbo / Turbo S 2017>>
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99104480308
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
黑色拉丝铝,高度增加 2 英寸
适合
保时捷 991.1 GT3 RS 2015-2017
保时捷 991.2 GT3 RS 2018-2019
曲线既向原始形状致敬,又呈现出与 GT3 RS 车身相得益彰的引人注目的新外观。
比 OEM 991.1 GT3 RS 立管高 2 英寸,可在高速转弯时更自信地转弯,并提供清晰无遮挡的后视图。
采用 6061 铝坯实心块精密加工而成。光滑的拉丝黑色表面
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
SA010-AL
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
Fits
Porsche 991.2 GT3 2017-2019
Salter Aero Carbon Fibre Wing End Plates for Porsche 991.2 GT3.
Replace your stock black wing plates with high gloss carbon fibre
Made using pre-preg aerospace quality carbon fibre
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
SA001
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
With TÜV parts certificate (§19.3), Also recognized in Switzerland
Fits:
Porsche 991 Carrera | S | 4 | 4S | GTS |Targa | Cabriolet | all models C2 & C4
The 991 decklid spoiler ensures the best possible aerodynamic properties and is at the same time a beautiful oem+ design element that gives your Porsche a unique appearance. A spoiler, which don't change your original hardware. The softer version of the ducktail spoiler, but with an aggressive raised extension area.
The Porsche active aerodynamic Rear spoiler functional capability stays and is not impaired.
This decklid spoiler are delivered primed & paint ready. Mounting material is included.
Please note this item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
P991.40.3020
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
With TÜV parts certificate (§19.3), Also recognized in Switzerland
Fits:
Porsche 991.2 Carrera S | 4 | 4S | GTS | Targa | Cabriolet
The 991.2 ducktail ensures the best possible aerodynamic properties and is at the same time a beautiful oem+ design element that gives your Porsche a unique appearance. The Porsche active aerodynamic Rear spoiler functional capability stays and is not impaired.
This duck tail spoiler is delivered primed & paint ready. Mounting material is included.
Please note this item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
P991.42.3022
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
Fits:
Porsche 991.2 GT2 RS - 2017 Onwards
The Manthey Kit for the 991.2 GT2 RS was developed in close collaboration between the Porsche Development Centre in Weissach and Manthey-Racing GmbH. Thanks to coordinated suspension, aerodynamics and braking components and the lightweight GT2 RS magnesium wheels, the breathtaking performance of the 991 GT2 RS has been tuned even more precisely to the demands of trackdays and tourist drives.
Porsche set a new course record at the Nürburgring in the sports car category in June 2021 with a 911 GT2 RS equipped with a Manthey Kit: The road-approved speedster completed a lap [sic] of the 20.8 km Nordschleife in just 6:43.300 minutes.
Aerodynamics package
Porsche and Manthey combined their respective technologies and know-how in the development of the aerodynamics package. In addition, individual components were developed with an eye to the defined performance targets. For instance, downforce at the front has been increased from 49 kg to 70 kg at a speed of 200 km/h through the use of a carbon underbody, additional air baffle elements in the area of the front wheels and flics on the front apron. The downforce at the rear end is increased from 93 kg to 200 kg at 200 km/h thanks to the rear wing in combination with the rear diffuser and aerodiscs, all of which are manufactured in carbon, further enhancing driving stability. The aerodiscs on the rear wheels reduce turbulence at the rear and have a positive effect on aerodynamic efficiency.
To accommodate the higher aero load caused by the rear wing, the rigidity at the rear end has been massively increased. The rear wing itself is attached directly to the body by means of special supports (standard: wing attached to the rear lid). The aerodynamics package achieves a shift in the aero balance and a 70% increase in overall downforce.
Among other things, the aerodynamics package was tested in the wind tunnel in Weissach, which remains one of the most modern of its kind: the blower with a diameter of eight metres has extremely lightweight carbon blades and can generate wind speeds of up to 300 km/h on the tested vehicle in the measurement area.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
991044805
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
Fits:
Porsche 991.2 GT3 RS - 2017 Onwards
Only for cars with 20/21 inch GT2 RS magnesium wheel set
The Manthey Kit for the 991.2 GT3 RS was developed in close collaboration between the Porsche Development Centre in Weissach and Manthey-Racing GmbH. Thanks to coordinated suspension, aerodynamic and brake components, the breathtaking performance of the 911 GT3 RS has been tuned even more precisely to the demands of trackdays and tourist drives.
Put it another way: 6:54.340 minutes for the 20.8-kilometre Nürburgring-Nordschleife. In this impressive time, Porsche works driver Kévin Estre lapped the "Green Hell" in a GT3 RS with an identical kit in April 2021.
Aerodynamics package
The downforce of the vehicle is increased by installing various components, including additional air baffle elements in the area of the front wheels, flaps on the front apron and a new rear wing of carbon. Aerodiscs on the rear wheels, also made of carbon, reduce turbulence in the rear of the vehicle and further increase aerodynamic efficiency. To accommodate the higher aero load caused by the rear wing, the rigidity at the rear end has been massively increased. The rear wing itself is connected directly to the body with the help of special supports (in the GT3 RS without Manthey Kit, the wing is attached to the rear lid). Among other things, the aerodynamics package was tested in the wind tunnel in Weissach, which remains one of the most modern of its kind: The blower with a diameter of eight metres has extremely lightweight carbon blades and can generate wind speeds of up to 300 km/h (186 mph) on the tested vehicle in the measurement area.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
991044805
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
Fits:
Porsche 991.2 GT3 RS - 2017 Onwards
Only for cars with 20/21 inch GT3 RS Wheel Set
The Manthey Kit for the 991.2 GT3 RS was developed in close collaboration between the Porsche Development Centre in Weissach and Manthey-Racing GmbH. Thanks to coordinated suspension, aerodynamic and brake components, the breathtaking performance of the 911 GT3 RS has been tuned even more precisely to the demands of trackdays and tourist drives.
Put it another way: 6:54.340 minutes for the 20.8-kilometre Nürburgring-Nordschleife. In this impressive time, Porsche works driver Kévin Estre lapped the "Green Hell" in a GT3 RS with an identical kit in April 2021.
Aerodynamics package
The downforce of the vehicle is increased by installing various components, including additional air baffle elements in the area of the front wheels, flaps on the front apron and a new rear wing of carbon. Aerodiscs on the rear wheels, also made of carbon, reduce turbulence in the rear of the vehicle and further increase aerodynamic efficiency. To accommodate the higher aero load caused by the rear wing, the rigidity at the rear end has been massively increased. The rear wing itself is connected directly to the body with the help of special supports (in the GT3 RS without Manthey Kit, the wing is attached to the rear lid). Among other things, the aerodynamics package was tested in the wind tunnel in Weissach, which remains one of the most modern of its kind: The blower with a diameter of eight metres has extremely lightweight carbon blades and can generate wind speeds of up to 300 km/h (186 mph) on the tested vehicle in the measurement area.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
991044805
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
Fits:
Porsche 991.2 911 GT2 RS
The rear decklid (engine lid) spoiler is designed to increase downforce to the rear end, creating increased stability and handling.
Made of pre-preg autoclave carbon fiber construction with a high glossy finish.
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
适合
保时捷 991.1 GT3 RS - 2016 年
保时捷 991.2 GT3 RS - 2016 年至 2019 年
保时捷 991.2 GT2 - 2016 年至 2019 年
Salter Aero 碳纤维后鸭尾唇
Salter Aero 后鸭尾唇不仅是一个功能性的翻板襟翼,而且对于那些具有较高机翼立管的飞机来说,还可以将空气引导到更靠近后翼底部的位置。
设计用于与我们的 +2" RS Wing Risers 配合使用,但它们也适用于 OEM 设置。
100% 碳纤维结构。
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
适用于除敞篷车外的所有车型/车身变体。
• 必要时包括安装配件
• GT3 RS 的固定支柱和发动机舱锁不包含在供货范围内。这些必须从保时捷原厂购买。
• 后扰流板采用创新的高品质材料 Fiberflex 制成。这种新型复合材料的优点:极高的柔韧性与出色的稳定性、抗碎裂性和不易燃性相结合。极高的制造质量和低重量甚至使其可用于专业赛车。独特的黑色表面具有良好的加工选项,可确保专业效果。Fiberflex 制成的产品具有出色的切割和粘合性能,非常适合维修和其他改装工作。
• 均匀的表面结构使喷漆无需大量准备工作(产品未上漆)
请注意:这是特殊订单商品,可能需要 8-12 周才能交付,并且一旦订购就无法取消。
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
Manufactured in carbon fibre prepreg autoclave molded at high temperature & pressure with twill 2×2, 200 gr. fabric. Finish clearcote gloss.
Fits:
Porsche 991.1 Turbo / Turbo S
Porsche 991.2 Turbo / Turbo S
Please note: Not compatible on 991 Turbo models with Porsche Tequipment Aerokit installed.
Install as replacement of oem upper rear wing using the existent fixing points.
Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
SFC99150423105GRV
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
适合:
保时捷 991 Carrera 2 / Carrera 4 - 2012 年至 2019 年
保时捷 991 Carrera 2S / Carrera 4S - 2012 年至 2019 年
这款碳纤维后扰流板非常适合用来为您的 991 赋予 OEM+ 外观,同时为经典的保时捷设计增添现代气息。
该扰流板由碳纤维制成,采用最先进的制造技术,在工厂进行装配和加工。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99150462100
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
Fits:
Porsche 991.2 C2 / C2S 2017>>
Porsche 991.2 C4 / C4S 2017>>
Porsche 991.2 Targa / Targa S 2017>>
Porsche 991.2 Carrera T 2017>>
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99104480340
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
Fits:
Porsche 991.1 911 GT3RS
Porsche 991.2 911 GT3RS
Porsche 991.2 911 GT2RS
This is a replacement for the factory wing riser and is designed to increase rear downforce by extending the wing 2 inches higher and further back for optimal track and street performance
There is an added visual benefit of raising the factory carbon wing blade to further improve the rear visibility.
These are made of aircraft grade 7000 series forged aluminum to ensure optimal strength and performance.
Designed to be a simple and direct factory replacement bolt on set.
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
Fits:
Porsche 991.1 GT3 - 2012 to 2016
Porsche 991.2 GT3 - 2016 to 2018
The UCW rear wing is a great addition to your 991 GT3 to significantly increase downforce at the rear, increase confidence on track, and reduce lap times.
Verus Engineering developed the UCW rear wing to bridge the gap between our swan neck high-efficiency rear wing and our 300mm V1X airfoil. With the 250mm curved chord, the UCW makes more downforce than the high-efficiency rear wing and significantly more downforce than similarly sized competitor wings.
Utilizing state-of-the-art analysis software during the R&D process, we optimized the airfoil for performance for the given build volume which is derived from the V1X. Further utilizing CFD, we ensured the rear wing sees adequate airflow while installed and performs well.
During the design process; we utilised in-house scan data. This results in a product that features a near OEM fit and finish.
The UCW wing is the perfect addition to the track goer who requires a large bump in rear downforce to balance out a significant front aero package.
Kit Includes
Features
Optimized Airfoil Using ANSYS Adjoint Solver
Improved Efficiency (L/D)
Increased Downforce
Bolts to OEM Trunk In Place of OEM Unit
Capable of Generating and Withstanding 500+lbs of Downforce
Capable of Balancing Out Significant Front Aerodynamic Systems
Specifications
Carbon Fiber Rear Wing - 2x2 Twill Pre-preg carbon, Autoclave Cured, Automotive High-Gloss Clear
Machined Billet Aluminum Uprights
Machined Billet Aluminum Trunk Mounts
Stainless Hardware Throughout
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
A0211A
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
With TÜV parts certificate (§19.3), Also recognized in Switzerland.
Fits:
Porsche 991 Turbo | Turbo S
Not for models with original Aerokit.
The 991 Turbo rear spoiler extension ensures the best possible aerodynamic properties and is at the same time a beautiful oem+ design element that gives your Porsche a unique appearance.
Our 991 Turbo rear spoiler extension ensures the highest possible downforce. The original height adjustment and lowering are of course unchanged. The Porsche active aerodynamic rear spoiler functional capability stays and is not impaired.
MOSHAMMER® Patented mounting system, plug & play without drilling, and no screwing!
This Rear wing spoiler extension is delivered primed & paint ready. Mounting material is included.
Please note this item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
P991.20.3020
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
Fits
Porsche 991.2 - 2016 to 2019
Rennline’s new ducktail spoiler is a great way to give your 991.2 an OEM+ look with a modern spin on the classic Porsche design. Made from high-quality, hand laid carbon fiber using state of the art manufacturing techniques for a factory fit and finish.
Product Description
- High quality construction, using the latest technologies
- Carbon Fiber version is hand laid with a high gloss UV protectant finish
- CAD designed using 3D scans of the factory decklid
- Modeled after the iconic Porsche ducktail design
- ABS version is easily paintable to color match to body
- Uses pre-installed industrial grade 3M VHB adhesive to install
- OEM fit and finish
- Fits all Coupe, Cabriolet and targa models
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
E380
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
适合:
保时捷 991.2 - 2016 年至 2019 年
保时捷 991.2 Turbo - 2016 年至 2019 年
产品描述
Rennline 的新款后扰流板非常适合用来为您的 991 赋予 OEM+ 外观,同时为经典的保时捷设计增添现代气息。
该扰流板由手工铺设的碳纤维制成,采用最先进的制造技术,在工厂进行装配和加工。
- 高品质施工,采用最新技术
- 碳纤维版采用手工铺设,表面涂有高光泽的紫外线防护涂层
- 使用工厂行李箱盖的 3D 扫描进行 CAD 设计
- 使用预装的工业级 3M VHB 粘合剂进行安装
- OEM装配和完成
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
#雷恩线#
适合:
保时捷 991.2 C2/C2S/C4/C4S Coupe 或 Cabrio
Rennline 的新型碳纤维 OEM 风格 GTS 扰流板是为您的 991.2 提供 OEM+ 外观和现代升级的绝佳方式。由高品质碳纤维制成,采用最新技术进行工厂装配和表面处理,同时增添一点风格。安装非常简单,打开您的 OEM 盖并扣上新的碳纤维部件!
• 高品质碳纤维结构
• 可涂漆碳纤维,或按原样即可安装
• 高光泽表面,具有防紫外线和耐热功能
• 根据工厂 GTS 扰流板设计
• 像工厂扰流板一样安装,无需粘合剂
• OEM 装配和表面处理
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
E379
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
For vehicles with headlight cleaning system and with front and rear ParkAssist
Fits:
Porsche 991.2 C2 / C2S 2017>>
Porsche 991.2 C4 / C4S 2017>>
Porsche 991.2 Targa / Targa S 2017>>
Porsche 991.2 Carrera T 2017>>
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99104480373
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
Fits:
Porsche 991.1 GT3
Porsche 991.2 GT3 RS
Porsche 991.2 GT2 RS
Dramatically improve rear-end grip at speed with our 300mm chord, swan neck rear wing. The wing and full aero kit were designed in CFD to greatly improve the vehicle's performance on and off the track.
The wing is a large driving force behind the improvement in downforce, coupled with the front splitter it transforms the GT3RS into a track weapon.
The rear wing was designed, iterated, and tested in CFD and a wind tunnel. All component mounting was designed off OEM scans and requires no permanent modification to the rear hatch of the vehicle.
The uprights are CNC machined from 6061-T6 aluminum and were FEA analyzed to ensure strength was kept high while weight was minimized.
Kit Includes
- Carbon Rear Wing, 300mm Swan Neck
- Carbon Vented Endplate (2)
- Machined 6061 Swan Neck Upright (2)
- Machined 6061 Chassis Mount Bracket (2)
- Machined Delrin Chassis Stop (2)
- Gurney Flap
- 3m VHB Double-Sided Tape, Gurney Flap
- Hardware Kit, Includes All Hardware Necessary for Install
Features
Rear Wing
2x2 Twill, 3k, Pre-Preg Carbon Fiber
Cured in an AutoClave
Carbon Inner Rib for Strength
Carbon Endplates
The Wing Itself Weighs in at Under 9 lbs
Mounting
Machined 6061-T6 Aluminum Mounts and Uprights
Military Spec (NAS) Hardware On Wing
Bolts on like OEM
Zero Permanent Modifications to the Chassis
Specifications
CFD Optimized Airfoil
Highly Efficient (Great L/D)
15 Total Adjustment Angles (-1 to 14 degrees)
Lightweight and High Strength
Capable of Generating and Handling Over 700lbs of Downforce at 120MPH
Swan Neck Design for Improved Efficiency from the Wing Element
OEM Bolt-On Install
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
Fits:
Porsche 991 R/GT3/RS 11/2017 - 12/2020 Touring models
Click 'Zoom in' for large parts diagram.
Diagram ref no 9
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99150428182G2X
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 R 4.0L (500 Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- 前扰流板/保险杠
- Rear Bumpers
- 车顶扰流板和蒙皮
- Front Hood / Bonnet
- Side Sill Trims / Skirts
- Wind Deflectors
- Exterior Mirrors
- Decorative Side Lettering
- Air Ducts & Vents
- Design Packages
- Face Lift Kits
- Bike racks
- Roof racks & rails
- Roof storage box
- Roof sports carriers
- Protective Grill
- TECHART
- Vorsteiner
- Exclusive
- Classic Look
- Lightweight Roof
- Wings Front & Rear
- Moshammer
- Sforza
- Salter Aero