Sealey Tools
Note: Substitute xx for blade pitch at the end of model number, i.e. SM35B/14 is 14tpi blade for SM35CE• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.
• Model No. SM353CE/B04• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.Blade 3035 x 25 x 0.89mm 4tpi
• Model No. SM353CE/085• Vari-pitch, Bi-Metal bandsaw blade.Blade 3035 x 25 x 0.89mm 4/6tpi Bi-Metal
Note: Substitute xx for blade pitch at the end of model number, i.e. SM35B/14 is 14tpi blade for SM35CE• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.
• Model No. SM35/B24• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.Blade 2362 x 19 x 0.81mm 24tpi
Note: Substitute xx for blade pitch at the end of model number, i.e. SM35B/14 is 14tpi blade for SM35CE• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.
• Model No. SM35/B18• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.Blade 2362 x 19 x 0.81mm 18tpi
Note: Substitute xx for blade pitch at the end of model number, i.e. SM35B/14 is 14tpi blade for SM35CE• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.
• Model No. SM35/B14• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.Blade 2362 x 19 x 0.81mm 14tpi
Note: Substitute xx for blade pitch at the end of model number, i.e. SM35B/14 is 14tpi blade for SM35CE• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.
• Model No. SM35/B08• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.Blade 2362 x 19 x 0.81mm 8tpi
Note: Substitute xx for blade pitch at the end of model number, i.e. SM35B/14 is 14tpi blade for SM35CE• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.
• Model No. SM35/B04• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.Blade 2362 x 32 x 0.81mm 4 SKIP
• Heavy-duty power bandsaw with hydraulic cutting arm control for a smooth cut.
• Maximum Capacity: 90mm at 60°, 150mm at 45° and 255mm at 0°.
• 750W/230V Motor.
• Saw arm fitted with hydraulic damping to prevent the arm being dropped onto the workpiece and to ensure smooth cutting performance.
• Bow rotates up to 60° angle allowing workpiece to always sit in a central position.
• Model No. SM355CE• Manufactured to comply with Safety of Machinery (Safety) Regulations 1992 (and amendments) and fully CE approved.
• Saw arms are fitted with hydraulic damping to prevent the arm being dropped onto the workpiece and to ensure smooth cutting performance.
• Bow rotates up to 60° angle allowing workpiece to always sit in a central position.
• Coolant fluid system and main power controls are switched on individual 24V/230V circuits for extra safety.
• Features auto and manual shut-off switches giving the user options of control when in use.
• Heavy-duty single phase electric motor.255mm Industrial Power Bandsaw
• Heavy-duty power bandsaw with hydraulic cutting arm control for a smooth cut.
• Maximum Capacity: 70mm at 60°, 120mm at 45° and 210mm at 0°.
• 750W/230V Motor.
• Saw arm fitted with hydraulic damping to prevent the arm being dropped onto the workpiece and to ensure smooth cutting performance.
• Bow swivels up to 60° angle allowing workpiece to always sit in a central position.
• Model No. SM354CE• Manufactured to comply with Safety of Machinery (Safety) Regulations 1992 (and amendments) and fully CE approved.
• Saw arms are fitted with hydraulic damping to prevent the arm being dropped onto the workpiece and to ensure smooth cutting performance.
• Bow swivels up to 60° angle allowing workpiece to always sit in a central position.
• Coolant fluid system and main power controls are switched on individual 24V/230V circuits for extra safety.
• Features auto and manual shut off switches giving the user options of control when in use.
• Heavy-duty single phase electric motor.210mm Industrial Power Bandsaw
• Maximum Cutting Height: 165mm.
• Fully approved to current CE regulations.
• Steel chassis with locking blade wheel covers.
• Micro switches prevent operation when either blade wheel cover is open.
• Bearing mounted blade wheels and belt drive induction motor provide smooth operation.
• Two speed operation enables bandsaw to cut multiple types of materials.
• Ø100mm Dust extraction port.
• Supplied with stand.
• Model No. SM1306• Fully approved to current CE regulations.
• Steel chassis with locking blade wheel covers.
• Bearing mounted blade wheels and belt drive induction motor provide smooth operation.
• Micro switches prevent operation when either blade wheel cover is open.
• No-volt release switch prevents uncontrolled blade re-start after power interruption.
• Suitable for cutting wood and plastics.
• Fitted with tilting table for cutting compound mitres.
• Supplied with quick adjusting rip fence, mitre gauge, dust extraction port and sturdy metal stand.335mm Professional Bandsaw
• Maximum Cutting Height: 165mm.
• Fully approved to current CE regulations.
• Steel chassis with locking wheel covers.
• Micro switches prevent operation when either blade wheel cover is open.
• Bearing mounted blade wheels and belt drive induction motor provide smooth operation.
• Two speed operation enables bandsaw to cut multiple types of materials.
• Ø100mm Dust extraction port.
• Supplied with stand.
• Model No. SM1305• Fully approved to current CE regulations.
• Steel chassis with locking blade wheel covers.
• Bearing mounted blade wheels and belt drive induction motor provide smooth operation.
• Micro switches prevent operation when either blade wheel cover is open.
• No-volt release switch prevents uncontrolled blade re-start after power interruption.
• Suitable for cutting wood and plastics.
• Fitted with tilting table for cutting compound mitres.
• Supplied with quick adjusting rip fence, mitre gauge, dust extraction port and sturdy metal stand.305mm Professional Bandsaw
• Max. Cutting Height: 100mm.
• Steel chassis with locking blade wheel covers.
• Fitted with blade wheel brush to prevent dust accumulation.
• Bearing mounted blade wheels and belt drive induction motor provide smooth operation.
• Ø60mm Dust extraction port.
• Fully approved to current CE regulations.
• Supplied with quick adjusting rip fence, mitre gauge and push stick.
• Model No. SM1304• Fully approved to current CE regulations.
• Steel chassis with locking blade wheel covers.
• Bearing mounted blade wheels and belt drive induction motor provide smooth operation.
• No-volt release switch prevents uncontrolled blade re-start after power interruption.
• Suitable for cutting wood and plastics.
• Fitted with tilting table for cutting compound mitres.
• Fitted with blade wheel brush to prevent dust accumulation and enhance blade life.
• Supplied with quick adjusting rip fence, mitre gauge, push stick and dust extraction port.245mm Throat Professional Bandsaw
• Max. Height Cut: 80mm.
• Fully approved to current CE regulations.
• Steel chassis with locking blade wheel covers.
• Fitted with blade wheel brush to prevent dust accumulation.
• Bearing mounted blade wheels and direct drive induction motor provide smooth operation.
• Ø60mm Dust extraction port.
• Supplied with rip fence, mitre gauge and push stick.
• Model No. SM1303• Fully approved to current CE regulations.
• Steel chassis with locking blade wheel covers.
• Bearing mounted blade wheels and direct drive induction motor provide smooth operation.
• No-volt release switch prevents uncontrolled blade re-start after power interruption.
• Suitable for cutting wood and plastics.
• Fitted with tilting table for cutting compound mitres.
• Fitted with blade wheel brush to prevent dust accumulation and enhance blade life.
• Supplied with quick adjusting rip fence, mitre gauge, push stick and dust extraction port.200mm Throat Professional Bandsaw
• Professional type quick-grip vice included as standard - put the work on the vice, push the jaw up to the workpiece, then pull the cam action lever to lock.
• Bench-top mounting on anti-vibration feet and oil bath gearbox for smooth running and long life.
• Roller bearing blade guides for precision cutting.
• Supplied with stand.
• Model No. SM65• Complies with the requirements of the Machinery Safety Directive 98/37/EEC and full CE approved.
• Fully guarded blade with magnetic no-load voltage switch to prevent motor re-start in the event of power failure or blade jam.
• Fitted with oil-bath gearbox and life lubricated drive bearings for quiet, smooth operation.
• Features swivel arm facility to aid angle cutting of long pieces of stock in confined workshop.
• Supplied with quick action vice - push the jaw up to the workpiece and then pull the cam action lever to lock.
• Fully adjustable precision blade guides for accurate cutting and longer blade life.
• Supplied with anti-vibration feet and workshop stand.150mm 3-Speed Metal Cutting Bandsaw with Mitre, Quick Lock Vice & Stand
• Heavy-duty cast base and cutting arm.
• Oil bath gear box and life lubricated bearings for quiet, smooth operation.
• Full guarded blade and magnetic no-load voltage switch.
• Complies with CE directive 98/37/EEC.
• Model No. SM5• Complies with the requirements of the Machinery Safety Directive 98/37/EEC and full CE approved.
• Fully guarded blade with magnetic no-load voltage switch to prevent motor re-start in the event of power failure or blade jam.
• Fitted with oil-bath gearbox and life lubricated drive bearings for quiet, smooth operation.
• Heavy-duty cast base and horizontal/vertical cutting arm.
• Saw base features integral mitring vice with scale of 90° to 45° for angle cutting and fully adjustable precision blade guides for accurate cutting and longer blade life.
• Stand is fitted with two transport wheels for added workshop mobility.150mm 3-Speed Metal Cutting Bandsaw
• Compact size and powerful motor make this unit suitable for the mobile workshop.
• Features swivel arm facility for added versatility.
• Provided with anti-vibration feet for mounting on bench or supplied workshop stand.
• Model No. SM4• Complies with the requirements of the Machinery Safety Directive 98/37/EEC and full CE approved.
• Fully guarded blade with magnetic no-load voltage switch to prevent motor re-start in the event of power failure or blade jam.
• Fitted with oil-bath gearbox and life lubricated drive bearings for quiet, smooth operation.
• Compact size and powerful motor make this unit suitable for the mobile workshop.
• Features swivel arm facility for added versatility.
• Supplied with anti-vibration feet and workshop stand.115mm 3-Speed Metal Cutting Bandsaw with Stand
• Heavy-duty power bandsaw with hydraulic cutting arm control for a smooth cut.
• 300mm Capacity at 90° and 170mm at 45°.
• 550W/230V Motor.
• Fully guarded and fitted with pulley cover safety switch.
• Saw arm fitted with hydraulic damping to prevent the arm being dropped onto the workpiece and to ensure smooth cutting performance.
• Model No. SM35CE• Manufactured to comply with Safety of Machinery (Safety) Regulations 1992 (and amendments) and fully CE approved.
• Saw arm is fitted with hydraulic damping to prevent the arm being dropped onto the workpiece and to ensure smooth cutting performance.
• Coolant fluid system and main power controls are switched on individual circuits.
• Heavy-duty single phase electric motor.300mm Horizontal Hydraulic Arm Bandsaw
• Ideal for Industrial and Agricultural engineering applications.
• Precision machined cast-iron saw bed.
• Hydraulic feed saw arm gives greater cutting control allowing clean results.
• 24V system for coolant pump and motor controls gives added safety to operator.
• Over-current sensor on motor cuts power in the event of blade jam.
• All blade and pulley covers protected by safety switches.
• Model No. SM353CE• Manufactured to comply with Safety of Machinery (Safety) Regulations 1992 (and amendments) and fully CE approved.
• Saw arm is fitted with hydraulic damping to prevent the arm being dropped onto the workpiece and to ensure smooth cutting performance.
• Coolant fluid system.
• Heavy-duty single phase electric motor with over-current sensor to cut power in the event of blade jam.400mm Horizontal Hydraulic Arm Bandsaw
• Suitable for powering small TVs, laptops, power tools and various other electrical equipment rated under 1000W (maximum under load).
• Features USB port for use on various domestic electronic equipment such as digital cameras and mobile phones.
• Anodized aluminium case provides durability and maximum heat dissipation.
• Safety features include automatic overload shut-down and a low battery alarm to prevent damage to the supply battery.
• Supplied with battery terminal leads.
• Model No. PI1000• Supplies continuous smooth 230V power from 12V DC power supply found in cars, caravans, boats and HGVs.
• Suitable for powering small TVs, laptops, power tools and various other electrical equipment rated under 1000W (maximum under load).
• Features USB port for use on various domestic electronic equipment such as digital cameras and mobile phones.
• Anodized aluminium case provides durability and maximum heat dissipation.
• Safety features include automatic overload shut-down and a low battery alarm to prevent damage to the supply battery.
• Supplied with battery terminal leads.1000W Power Inverter 12V DC - 230V 50Hz
• Suitable for powering small TVs, laptops, power tools and various other electrical equipment rated under 700W (maximum under load).
• Features USB port for use on various domestic electronic equipment such as digital cameras and mobile phones.
• Anodized aluminium case provides durability and maximum heat dissipation.
• Safety features include automatic overload shut-down and a low battery alarm to prevent damage to the supply battery.
• Supplied battery clips.
• Model No. PI700• Supplies continuous smooth 230V power from 12V DC power supply found in cars, caravans, boats and HGVs.
• Suitable for powering small TVs, laptops, power tools and various other electrical equipment rated under 700W (maximum under load).
• Features USB port for use on various domestic electronic equipment such as digital cameras and mobile phones.
• Anodized aluminium case provides durability and maximum heat dissipation.
• Safety features include automatic overload shut-down and a low battery alarm to prevent damage to the supply battery.
• Supplied battery clips.700W Power Inverter 12V DC - 230V 50Hz
• Suitable for powering small TVs, laptops, power tools and various other electrical equipment rated under 500W (maximum under load).
• Features USB port for use on various domestic electronic equipment such as digital cameras and mobile phones.
• Anodized aluminium case provides durability and maximum heat dissipation.
• Safety features include automatic overload shut-down and a low battery alarm to prevent damage to the supply battery.
• Supplied with battery clips.
• Model No. PI500• Supplies continuous smooth 230V power from 12V DC power supply found in cars, caravans, boats and HGVs.
• Suitable for powering small TVs, laptops, power tools and various other electrical equipment rated under 500W (maximum under load).
• Features USB port for use on various domestic electronic equipment such as digital cameras and mobile phones.
• Anodized aluminium case provides durability and maximum heat dissipation.
• Safety features include automatic overload shut-down and a low battery alarm to prevent damage to the supply battery.
• Supplied with battery clips.500W Power Inverter 12V DC - 230V 50Hz
• Suitable for powering TVs, computers, VCRs, DVD players and other electrical equipment rated under 300W (maximum under load).
• Anodized aluminium case provides durability and maximum heat dissipation.
• Safety features include automatic overload shut-down and a low battery alarm to prevent damage to the supply battery.
• Supplied with cigarette lighter plug and battery clips.
• Model No. PI300• Supplies continuous smooth 230V power from 12V DC power supply found in cars, caravans, boats and HGVs.
• Suitable for powering small TVs, laptops, power tools and various other electrical equipment within the wattage rating of the inverter (maximum under load).
• Anodized aluminium case provides durability and maximum heat dissipation.
• Safety features include automatic overload shut-down and a low battery alarm to prevent damage to the supply battery.
• Supplied with cigarette lighter plug and/or battery clips depending on model.300W Power Inverter 12V DC - 230V 50Hz
• Air motor with quality bearings for smooth and powerful operation.
• Fitted with safety trigger to prevent inadvertent operation and rear exhaust for quiet operation.
• Supplied with Ø50mm pad and spanner.
• Model No. SA70• Lightweight sanding tool with aluminium housing suitable for use with SA701 sanding discs.
• Air motor with quality bearings for smooth and powerful operation.
• Fitted with safety trigger to prevent inadvertent operation and rear exhaust for quiet operation.
• Supplied with Ø50mm pad and spanner.Ø50mm Mini Disc Air Orbital Sander
• Powerful air motor provides smooth operation under-load.
• Supplied with Ø75mm hook-and-loop pad and spanner.
• Use with Ø79mm buffing and polishing heads.
• Model No. GSA722• Textured grip and lightweight aluminium alloy housing provide comfort and control.
• Powerful air motor provides smooth operation under load.
• Supplied with Ø75mm hook-and-loop pad and spanner.
• Use with Ø79mm buffing and polishing heads.Ø75mm Mini Air Polisher
• Composite lightweight housing reduces effects of chill on operator's hands.
• Adjustable speed control on side of motor housing.
• Air motor with quality bearings for smooth and powerful operation.
• Integral gear system reduces output speed, still maintaining a high torque level.
• Suitable for the professional workshop.
• Model No. SA722• Composite lightweight housing reduces effects of chill on operator's hands.
• Adjustable speed control on side of motor housing.
• Air motor with quality bearings for smooth and powerful operation.
• Integral gear system reduces output speed, still maintaining a high torque level.
• Supplied with Ø75mm hook-and-loop pad for use with buffing and polishing heads.
• Suitable for the professional workshop.Premier 75mm Composite Mini Air Polisher
• Smooth operation provides even buffing/polishing with no hot spots.
• High impact, durable housing with twin grips.
• 18V Ni-Cd battery pack and battery charger.
• Model No. CP2518• Cordless random orbital polisher with Ø230mm 5-ply foam pad and two polishing bonnets.
• Smooth operation provides even buffing/polishing with no hot spots.
• Impact resistant housing with twin grips.
• Supplied with 18V Ni-Cd battery pack and battery charger.18V 230mm Cordless Polisher
• Smooth operation provides even buffing/polishing with no hot spots.
• High impact, durable ABS housing with 360° grip.
• Supplied with 4mtr cable and BS approved plug.
• TUV/GS and CE approved.
• Model No. ER230P• Random orbital polisher with Ø230mm 5-ply foam pad and two polishing bonnets.
• Smooth operation provides even buffing/polishing with no hot spots.
• Impact resistant ABS housing with 360° grip.
• Supplied with 4mtr cable and BS approved plug.230mm Car Polisher 90W/230V
• Smooth operation provides even buffing/polishing with no hot spots.
• High impact, durable ABS housing with twin grips.
• Supplied with 4mtr cable and BS approved plug.
• TUV/GS and CE approved.
• Model No. ER150P• Random orbital polisher with Ø150mm 3-ply foam pad and two polishing bonnets.
• Smooth operation provides even buffing/polishing with no hot spots.
• Impact resistant ABS housing with twin grips.
• Supplied with 4mtr cable and BS approved plug.
• TUV/GS and CE approved.150mm Car Polisher 60W/230V
• Model No. CP2518BPV2• 18V Battery pack for CP2518.V218V Cordless Power Tool Battery for CP2518.V2
• Model No. ER230P.WB• Suitable for Polishers ER230P, CP2518.230mm Synthetic Fleece Bonnet for ER230P & CP2518
• Model No. ER230P.TB• Suitable for Polishers ER230P, CP2518.230mm Terry Bonnet for ER230P & CP2518
• Model No. ER150P.WB• Suitable for Polisher ER150P.150mm Synthetic Fleece Bonnet for ER150P
• Model No. ER150P.TB• Suitable for Polisher ER150P.150mm Terry Bonnet for ER150P
• Model No. ER150P.BP• Suitable for ER150P.150mm Backing Pad for ER150P
• Two level gear system reduces output speed, still maintaining a high torque level.
• Alloy bevel gear head with composite motor housing.
• Spindle lock for easy pad removal.
• Supplied with Ø150mm hook-and-loop backing pad, polishing bonnet and side handle.
• Up to 50% lighter than some polishers.
• Model No. ER1700P• Features variable speed control ranging from 0 to 2800rpm.
• Two level gear system reduces output speed, still maintaining a high torque level.
• Alloy bevel gear head with composite motor housing.
• Spindle lock for easy pad removal.
• Supplied with Ø150mm hook-and-loop backing pad, polishing bonnet and side handle.
• Up to 50% lighter than some polishers.150mm Lightweight Polisher 800W/230V
• Composite handle with rear exhaust reduces effects of chill and noise level.
• Air motor with quality bearings for smooth and powerful operation.
• Fitted with safety trigger to prevent inadvertent operation.
• Integral gear system reduces output speed, while maintaining a high torque level.
• Suitable for the professional workshop.
• Model No. SA704• Composite handle with rear exhaust reduces effects of chill and noise level.
• Air motor with quality bearings for smooth and powerful operation.
• Fitted with safety trigger to prevent inadvertent operation.
• Integral gear system reduces output speed, while maintaining a high torque level.
• Supplied with hook-and-loop pad for use with buffing and polishing heads.
• Suitable for the professional workshop.Premier 75mm Air Angle Polisher
• Precision made bevel gears give quiet and smooth operation.
• Trigger operated throttle control.
• Suitable for polishing and compounding.
• Supplied with Ø180mm self-adhesive backing pad.
• Model No. SA17/S• Polished and well balanced aluminium body with two side handle mounting positions.
• Precision made bevel gears give quiet and smooth operation.
• Trigger operated throttle control.
• Suitable for polishing and compounding.
• Supplied with Ø180mm self-adhesive backing pad.180mm Air Polisher 2500rpm
• Hardened, tempered and chrome plated for corrosion resistance.
• Groove joint adjustable head.
• Heavy-duty moulded, non-slip handles.
• Model No. S0460• Manufactured from Chrome Vanadium steel.
• Hardened, tempered and chrome plated for corrosion resistance.
• Groove joint adjustable head.
• Heavy-duty moulded, non-slip handles.400mm Water Pump Pliers
• Hardened, tempered and chrome plated for corrosion resistance.
• Groove joint adjustable head.
• Heavy-duty moulded, non-slip handles.
• Model No. S0459• Manufactured from Chrome Vanadium steel.
• Hardened, tempered and chrome plated for corrosion resistance.
• Groove joint adjustable head.
• Heavy-duty moulded, non-slip handles.300mm Water Pump Pliers
• Hardened, tempered and chrome plated for corrosion resistance.
• Groove joint adjustable head.
• Heavy-duty moulded, non-slip handles.
• Model No. S0458• Manufactured from Chrome Vanadium steel.
• Hardened, tempered and chrome plated for corrosion resistance.
• Groove joint adjustable head.
• Heavy-duty moulded, non-slip handles.250mm Water Pump Pliers