Designtek Exhaust 200 cell high flow sports catalytic converters for Ferrari 458 - 3606009458
Code: 3606009458
The item listed is a premium quality, 304 grade stainless pair of 200 Cell Sports Cats for the Ferrari 458.
Fits OE exhaust systems, also fits all aftermarket exhaust systems that fit OE cats.
Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only.
Fits OE exhaust systems, also fits all aftermarket exhaust systems that fit OE cats.
Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only.
€1,573.33
Now €1,541.86
Orderable 
Related products
One-Touch Comfort-Softtop roof control for Convertible Ferrari 360 Spider and F430 Spider SmartTop
Code: STAFFI1
The smartTOP roof control unit allows opening or closing the convertible top while driving at slow speeds. It works similar to power-windows and opens or closes the roof automatically at the touch of a button. It is not necessary to stop the vehicle and pull the handbrake to operate the roof.
Remote control of convertible top
Open/Close your convertible top using the original factory remote control key / key fob.
Open/Close the top while driving
Never have to stop again for your top: Open/Close your top while driving. Speed programmable up to 40kmh.
One-Touch power convertible top
"One-Touch" convertible top operation allows your top to open or close automatically.
Individually programmable
Configure all functions of the module to meet your personal preferences via USB setup.
Passive / Invisible mode
Turn the whole module off with an easy key sequence. Ideal when letting someone else drive your car.
Reversible plug-in installation
Remove any time allowing sale or return of a leased vehicle in its original condition.
Separate window control
Raise and lower the windows separately by remote without activating the top.
Top convenience mode
Turning the ignition on or off does not interrupt convertible top operation.
Invert switch logic
Direction of center console top switch can be changed to "pull to open" and "push to close".
Comfort window close
One-Touch operation when closing all windows simultaneously via the separate driver's door switch.
Keyless Go top control
Open and close the top by touching the door handle three times.
Plug-n-Play Wiring harness
Custom designed plug-in-between wiring harness for extremely simple and quick installation included.
USB Port for easy setup / updates
This module can be configured and updated using
any Mac or PC.
This Product Fits:
Ferrari 360 Spider and F430 Spider
Remote control of convertible top
Open/Close your convertible top using the original factory remote control key / key fob.
Open/Close the top while driving
Never have to stop again for your top: Open/Close your top while driving. Speed programmable up to 40kmh.
One-Touch power convertible top
"One-Touch" convertible top operation allows your top to open or close automatically.
Individually programmable
Configure all functions of the module to meet your personal preferences via USB setup.
Passive / Invisible mode
Turn the whole module off with an easy key sequence. Ideal when letting someone else drive your car.
Reversible plug-in installation
Remove any time allowing sale or return of a leased vehicle in its original condition.
Separate window control
Raise and lower the windows separately by remote without activating the top.
Top convenience mode
Turning the ignition on or off does not interrupt convertible top operation.
Invert switch logic
Direction of center console top switch can be changed to "pull to open" and "push to close".
Comfort window close
One-Touch operation when closing all windows simultaneously via the separate driver's door switch.
Keyless Go top control
Open and close the top by touching the door handle three times.
Plug-n-Play Wiring harness
Custom designed plug-in-between wiring harness for extremely simple and quick installation included.
USB Port for easy setup / updates
This module can be configured and updated using
any Mac or PC.
This Product Fits:
Ferrari 360 Spider and F430 Spider
€199.42
Now €195.43
In stock
ICarsoft Professional Diagnostic Tool CR Plus for Multi-brand Vehicles
Code: CRPLUS
ICarsoft Professional Diagnostic Tool CR Plus for Multi-brand Vehicles
iCarsoft CR Plus is a well built comprehensive diagnosis instrument by iCarsoft.It's not only including full function of OBDII/EOBD,but also support more function of Four system( Engine, automatic transmission, anti-lock braking system and airbag ) of certain models of car, such as read and clear code, multi languages, data flow picture display, graph. It also includes Electronic Parking Brake (EPB) release, Steering Angle Sensor (SAS) and Oil Service Light resets. View Engine, ABS, SRS along with A/T enhanced data
Features & Benefits:
• OBDII diagnostic full function
• Multiple car models (covering over 40 prevailing models from Asia, America and Europe).
• Support 4 Systems: Engine, Transmission, ABS, and Airbag.
• Basic diagnostic functions: read DTCs, clear DTCs, and read data stream
• Support DTCs help, data stream wave display, history data record and replay
• Online upgrade, you can download the latest version anytime anywhere.
• Auto module search
• Enhanced OBDII Mode 6
• Supports vehicles 1996 & newer ( OBDII & CAN )
• Retrieves generic P0, P2, P3 & U0 codes,
along with manufacturer specific P1, P3 & U1 codes – both permanent & pending
• Read & Clear Check Engine Lights
• Turn off MIL & reset monitors
• Displays DTC definitions right on the screen
• View freeze frame data & I/M Readiness monitor status
• Display live PCM data stream & O2 Sensor test data
• Graph, record & replay data in full color
• Resets Oil Service Light
• Brake Pads Reset
• Steering Angle Sensor Calibration
• Code cause / solution tips guide users to the root cause of trouble codes faster, saving diagnosis and repair time
• Retrieves vehicle information ( VIN, CIN and CVN )
Twelve Super Advantages:
1. Read & Clear DTCs
2. Read Data Stream
3. Full ECU Diagnosis
4. Diagnose Multi-brand Models Equipped With OBDII-16 DLC
5. Easy To Use With Metal Dome Keys
6. Oil Light/Service Reset
7.Brake Pads Reset
8.Steering Angle Sensor Calibration
9. 4.0" TFT LCD With 480 * 320 Pixels
10. USB 2.0 High Speed Upgrade
11. Upgrade Via TF Card
12. Multi-language: English, French, Spanish, German, Italian, Russian and Dutch.
And for more, refer to User's Manual.
Specifications:
• Display: 4.0" TFT LCD , with 480 * 320 Pixels
• Operation Temperature: 0℃ -- 50℃
• Storage Temperature: -20 ℃ -- 70 ℃
• Power: 9V -- 18V
• Operating current: 150mA@12V(Typical)
• Power consumption: 1.8W(Typical)
• Dimension: 205mm*110mm*31mm(LxWxH)
• Weight: 350g
OBDII function:
1. Read Codes
2. Erase Codes
3. I/M Readiness -- I/M Readiness indicates whether or not the various emissions-related systems on the vehicle are
operating properly and are ready for Inspection and Maintenance testing.
4. Data Stream
5. Freeze Frame -- When an emission-related fault occurs, certain vehicle conditions are recorded by
the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of
the operating conditions at the time of an emission-related fault.
6. O2 Sensor Test -- This option allows retrieval and viewing of O2 sensor test results for most recently
performed tests from the vehicle's on-board computer.
7. On-Board Monitoring -- This function can be utilized to read the results of on-board diagnostic monitoring
tests for specific components/systems.
8. Evap System Test -- The EVAP test function lets you initiate a leak test for the vehicle's EVAP system.
Before using the system test function, refer to the vehicle's service repair manual to determine the procedures
necessary to stop the test.
9. Vehicle Information -- The option displays the vehicle identification number (VIN), the calibration verification
number (CVN), and other information of the test vehicle.
Contents:
● Main Unit
● Hardcopy User's Manual
● Main cable
● USB cable
● TF Card
● Nylon carry case
● TF Card reader
iCarsoft CR Plus is a well built comprehensive diagnosis instrument by iCarsoft.It's not only including full function of OBDII/EOBD,but also support more function of Four system( Engine, automatic transmission, anti-lock braking system and airbag ) of certain models of car, such as read and clear code, multi languages, data flow picture display, graph. It also includes Electronic Parking Brake (EPB) release, Steering Angle Sensor (SAS) and Oil Service Light resets. View Engine, ABS, SRS along with A/T enhanced data
Features & Benefits:
• OBDII diagnostic full function
• Multiple car models (covering over 40 prevailing models from Asia, America and Europe).
• Support 4 Systems: Engine, Transmission, ABS, and Airbag.
• Basic diagnostic functions: read DTCs, clear DTCs, and read data stream
• Support DTCs help, data stream wave display, history data record and replay
• Online upgrade, you can download the latest version anytime anywhere.
• Auto module search
• Enhanced OBDII Mode 6
• Supports vehicles 1996 & newer ( OBDII & CAN )
• Retrieves generic P0, P2, P3 & U0 codes,
along with manufacturer specific P1, P3 & U1 codes – both permanent & pending
• Read & Clear Check Engine Lights
• Turn off MIL & reset monitors
• Displays DTC definitions right on the screen
• View freeze frame data & I/M Readiness monitor status
• Display live PCM data stream & O2 Sensor test data
• Graph, record & replay data in full color
• Resets Oil Service Light
• Brake Pads Reset
• Steering Angle Sensor Calibration
• Code cause / solution tips guide users to the root cause of trouble codes faster, saving diagnosis and repair time
• Retrieves vehicle information ( VIN, CIN and CVN )
Twelve Super Advantages:
1. Read & Clear DTCs
2. Read Data Stream
3. Full ECU Diagnosis
4. Diagnose Multi-brand Models Equipped With OBDII-16 DLC
5. Easy To Use With Metal Dome Keys
6. Oil Light/Service Reset
7.Brake Pads Reset
8.Steering Angle Sensor Calibration
9. 4.0" TFT LCD With 480 * 320 Pixels
10. USB 2.0 High Speed Upgrade
11. Upgrade Via TF Card
12. Multi-language: English, French, Spanish, German, Italian, Russian and Dutch.
And for more, refer to User's Manual.
Specifications:
• Display: 4.0" TFT LCD , with 480 * 320 Pixels
• Operation Temperature: 0℃ -- 50℃
• Storage Temperature: -20 ℃ -- 70 ℃
• Power: 9V -- 18V
• Operating current: 150mA@12V(Typical)
• Power consumption: 1.8W(Typical)
• Dimension: 205mm*110mm*31mm(LxWxH)
• Weight: 350g
OBDII function:
1. Read Codes
2. Erase Codes
3. I/M Readiness -- I/M Readiness indicates whether or not the various emissions-related systems on the vehicle are
operating properly and are ready for Inspection and Maintenance testing.
4. Data Stream
5. Freeze Frame -- When an emission-related fault occurs, certain vehicle conditions are recorded by
the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of
the operating conditions at the time of an emission-related fault.
6. O2 Sensor Test -- This option allows retrieval and viewing of O2 sensor test results for most recently
performed tests from the vehicle's on-board computer.
7. On-Board Monitoring -- This function can be utilized to read the results of on-board diagnostic monitoring
tests for specific components/systems.
8. Evap System Test -- The EVAP test function lets you initiate a leak test for the vehicle's EVAP system.
Before using the system test function, refer to the vehicle's service repair manual to determine the procedures
necessary to stop the test.
9. Vehicle Information -- The option displays the vehicle identification number (VIN), the calibration verification
number (CVN), and other information of the test vehicle.
Contents:
● Main Unit
● Hardcopy User's Manual
● Main cable
● USB cable
● TF Card
● Nylon carry case
● TF Card reader
€182.90
Now €179.24
In stock
iCarsoft CR PRO Professional multi-system car diagnostic tool for multiple global car brand manufacturers.
Code: CRPRO
iCarsoft CR PRO Professional multi-system car diagnostic tool for multiple global car brand manufacturers.
Works on all cars upto 2017 with OBDII port.
ICARSOFT CR PRO SUPER ADVANTAGES:
• Diagnose Single Brand of most Models (OBDII-16DLC)
• Full System Diagnosis
• Read & Clear DTC
• Read Live Data
• Oil Service Reset
• Electronic Parking Brake (EPB) system maintenance
• Battery Management System (BMS)
• Diesel Particulate Filter (DPF) Regeneration Control System
• Electronic Throttle Control System (ETC)
• Steering Angle Sensor (SAS) Calibration
• Battery Test
• Data Review and Print
• Full Speed Upgrade via PC
• 4.0″ TFT LCD, 480*320 Pixels
• Multi-Language: English, German, Dutch, Spanish and French
ICARSOFT CR PRO OBDII FUNCTION FOR ALL CAR BRANDS
OBDII Function for all OBDII cars.
Read Codes | Read generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) permanent and pending Diagnostic Trouble Codes.
Erase Codes | Erase generic and manufacturer specific Diagnostic Trouble Codes.
Determine MIL | Turn off Check Engine Light (MIL) after clearing codes and reset monitors.
DataStream | Read live PCM DataStream. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
Freeze Frame Data | When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
I/M Readiness Test | Indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
O2 Sensor Test | This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle's on-board computer.
Evap System Test | The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test.
Battery test | Allows you getting the voltage of battery when the engine starts.
On-Board Monitoring | This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
Vehicle Information | Displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the vehicle.
Comprehensive Help | Including OBD Parameter, Mode Explanations, DTC search & More.
iCarsoft CR PRO OBDII Function supports most of the OBDII/EOBD test modes including CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
iCarsoft CR PRO OBDII Function works on most of 2001 and later European OBDII compliant PETROL vehicles and most of 2004 and later European OBDII compliant DIESEL vehicles.
ICARSOFT CR PRO FEATURES FOR GLOBAL CAR BRANDS
• iCarsoft CR PRO reads and clears trouble codes on most of the electronic systems such as engine, transmission, ABS, airbag etc.
• Support OBDII/EOBD (Ten Modes of Operation)
• Full ECU Diagnosis
• Oil Light/Service Reset
• Electronic Parking Brake (EPB) system maintenance deactivates and reactivates the EPB system for replacement and initialization
• Battery Management System (BMS) registers new battery to the BMS while battery replacement
• Diesel Particulate Filter (DPF) regeneration control system, requests the DPF regen-eration process while DPF blockage and turn off the DPF indicator
• Electronic Throttle Control system (ETC) relearns the throttle va value while clear or replaces the throttle valve
• Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to straight ahead, or recalibrates SAS while steering part replacement
• Applies to most models which equipped with OBDII-16 DLC
iCarsoft CR PRO vehicle coverage for global car brands:
Acura | Alfa Romeo | Audi | BMW | Chrysler | Citroën | Dacia | Daewoo | Fiat | Ford | GM | Holden | Honda | Hyundai | Infiniti | Isuzu | Jaguar | Kia | LandRover | Lexus | Mazda | Mercedes-Benz | Mini | Mitsubishi | Nissan | Opel | Peugeot | Porsche | Renault | Saab | Scion | Seat | Skoda | Smart | Subaru | Suzuki | Toyota | Vauxhall | Volkswagen | Volvo
ICARSOFT CR PRO CONTENTS
• iCarsoft CR PRO scantool
• TF card with diagnostic software
• OBDII cable
• Users Manual
• PC Connecting cable
• Nylon Carry Case
Works on all cars upto 2017 with OBDII port.
ICARSOFT CR PRO SUPER ADVANTAGES:
• Diagnose Single Brand of most Models (OBDII-16DLC)
• Full System Diagnosis
• Read & Clear DTC
• Read Live Data
• Oil Service Reset
• Electronic Parking Brake (EPB) system maintenance
• Battery Management System (BMS)
• Diesel Particulate Filter (DPF) Regeneration Control System
• Electronic Throttle Control System (ETC)
• Steering Angle Sensor (SAS) Calibration
• Battery Test
• Data Review and Print
• Full Speed Upgrade via PC
• 4.0″ TFT LCD, 480*320 Pixels
• Multi-Language: English, German, Dutch, Spanish and French
ICARSOFT CR PRO OBDII FUNCTION FOR ALL CAR BRANDS
OBDII Function for all OBDII cars.
Read Codes | Read generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) permanent and pending Diagnostic Trouble Codes.
Erase Codes | Erase generic and manufacturer specific Diagnostic Trouble Codes.
Determine MIL | Turn off Check Engine Light (MIL) after clearing codes and reset monitors.
DataStream | Read live PCM DataStream. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
Freeze Frame Data | When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
I/M Readiness Test | Indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
O2 Sensor Test | This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle's on-board computer.
Evap System Test | The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test.
Battery test | Allows you getting the voltage of battery when the engine starts.
On-Board Monitoring | This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
Vehicle Information | Displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the vehicle.
Comprehensive Help | Including OBD Parameter, Mode Explanations, DTC search & More.
iCarsoft CR PRO OBDII Function supports most of the OBDII/EOBD test modes including CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
iCarsoft CR PRO OBDII Function works on most of 2001 and later European OBDII compliant PETROL vehicles and most of 2004 and later European OBDII compliant DIESEL vehicles.
ICARSOFT CR PRO FEATURES FOR GLOBAL CAR BRANDS
• iCarsoft CR PRO reads and clears trouble codes on most of the electronic systems such as engine, transmission, ABS, airbag etc.
• Support OBDII/EOBD (Ten Modes of Operation)
• Full ECU Diagnosis
• Oil Light/Service Reset
• Electronic Parking Brake (EPB) system maintenance deactivates and reactivates the EPB system for replacement and initialization
• Battery Management System (BMS) registers new battery to the BMS while battery replacement
• Diesel Particulate Filter (DPF) regeneration control system, requests the DPF regen-eration process while DPF blockage and turn off the DPF indicator
• Electronic Throttle Control system (ETC) relearns the throttle va value while clear or replaces the throttle valve
• Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to straight ahead, or recalibrates SAS while steering part replacement
• Applies to most models which equipped with OBDII-16 DLC
iCarsoft CR PRO vehicle coverage for global car brands:
Acura | Alfa Romeo | Audi | BMW | Chrysler | Citroën | Dacia | Daewoo | Fiat | Ford | GM | Holden | Honda | Hyundai | Infiniti | Isuzu | Jaguar | Kia | LandRover | Lexus | Mazda | Mercedes-Benz | Mini | Mitsubishi | Nissan | Opel | Peugeot | Porsche | Renault | Saab | Scion | Seat | Skoda | Smart | Subaru | Suzuki | Toyota | Vauxhall | Volkswagen | Volvo
ICARSOFT CR PRO CONTENTS
• iCarsoft CR PRO scantool
• TF card with diagnostic software
• OBDII cable
• Users Manual
• PC Connecting cable
• Nylon Carry Case
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Boxster Spyder 3.8L 2016
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayenne 3.2L V6 2003>>
- Porsche Cayenne S 4.5L V8 2003>>
- Porsche Cayenne Turbo 4.5L 2003>>
- Porsche Cayenne Turbo S 4.5L 2006>>
- Porsche Cayenne 3.0L Diesel 2007>>
- Porsche Cayenne 3.6L 2007>>
- Porsche Cayenne S/GTS 4.8L 2007>>
- Porsche Cayenne Turbo / Turbo S 4.8L 2007>>
- Porsche Cayenne V6 3.6L Petrol 300Hp
- Porsche Cayenne V6 3.0L Diesel 245HP
- Porsche Cayenne S V6 3.0L Hybrid 380HP
- Porsche Cayenne S V8 4.8L Petrol 400HP
- Porsche Cayenne S V8 4.2L Diesel 382HP
- Porsche Cayenne GTS V8 4.8L Petrol 400HP
- Porsche Cayenne Turbo V8 4.8L Petrol 500HP
- Porsche Cayenne Turbo S V8 4.8L Petrol 550HP
- Porsche Panamera V6 3.6L 2WD
- Porsche Panamera 4 V6 3.6L 4WD
- Porsche Panamera S V8 4.8L
- Porsche Panamera 4S V8 4.8L
- Porsche Panamera GTS V8 4.8L
- Porsche Panamera Turbo V8 4.8L
- Porsche Panamera Turbo S V8 4.8L
- Porsche Panamera Diesel V6 3.0L
- Porsche Panamera S Hybrid V6 3.0L
- Porsche Panamera V6 3.6L 2WD (310Hp)
- Porsche Panamera 4 V6 3.6L 4WD (310Hp)
- Porsche Panamera S V6 Turbo 3.0L 2WD (420Hp)
- Porsche Panamera S V6 Turbo 3.0L 2WD Executive
- Porsche Panamera 4S V6 Turbo 3.0L 4WD (420Hp)
- Porsche Panamera 4S V6 Turbo 3.0L 4WD Executive
- Porsche Panamera GTS V8 4.8L 4WD (440Hp)
- Porsche Panamera Turbo V8 4.8L (520Hp)
- Porsche Panamera Turbo V8 Executive
- Porsche Panamera Turbo S V8 4.8L
- Porsche Panamera Diesel V6 3.0L (250Hp)
- Porsche Panamera S E-Hybrid V6 3.0L (416Hp)
- Porsche Macan Petrol 2.0L V4 237Bhp
- Porsche Macan S Petrol 3.0L V6 340Bhp
- Porsche Macan S Diesel 3.0L V6 258Bhp
- Porsche Macan GTS Petrol 3.0L V6 360Bhp
- Porsche Macan Turbo 3.6L V6 400Bhp
€241.90
Now €237.06
In stock
