Power Saws
• Heavy-duty power bandsaw with hydraulic cutting arm control for a smooth cut.
• 300mm Capacity at 90° and 170mm at 45°.
• 550W/230V Motor.
• Fully guarded and fitted with pulley cover safety switch.
• Saw arm fitted with hydraulic damping to prevent the arm being dropped onto the workpiece and to ensure smooth cutting performance.
• Model No. SM35CE• Manufactured to comply with Safety of Machinery (Safety) Regulations 1992 (and amendments) and fully CE approved.
• Saw arm is fitted with hydraulic damping to prevent the arm being dropped onto the workpiece and to ensure smooth cutting performance.
• Coolant fluid system and main power controls are switched on individual circuits.
• Heavy-duty single phase electric motor.300mm Horizontal Hydraulic Arm Bandsaw
• Ideal for Industrial and Agricultural engineering applications.
• Precision machined cast-iron saw bed.
• Hydraulic feed saw arm gives greater cutting control allowing clean results.
• 24V system for coolant pump and motor controls gives added safety to operator.
• Over-current sensor on motor cuts power in the event of blade jam.
• All blade and pulley covers protected by safety switches.
• Model No. SM353CE• Manufactured to comply with Safety of Machinery (Safety) Regulations 1992 (and amendments) and fully CE approved.
• Saw arm is fitted with hydraulic damping to prevent the arm being dropped onto the workpiece and to ensure smooth cutting performance.
• Coolant fluid system.
• Heavy-duty single phase electric motor with over-current sensor to cut power in the event of blade jam.400mm Horizontal Hydraulic Arm Bandsaw
• Suitable for cutting steel, aluminium, brass, copper and plastics.
• Model No. SM4.B14• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.Blade 1302 x 13 x 0.36mm 14tpi
• Suitable for cutting wood, plastics and thin metal sheet.
• Model No. SM1303B10• Flexible bandsaw blade with hardened steel teeth.
• Suitable for cutting wood, plastics and thin metal sheet.Blade 1400 x 6.5 x 0.35mm 10tpi
• Suitable for cutting wood, plastics and thin metal sheet.
• Model No. SM1303B24• Flexible bandsaw blade with hardened steel teeth.
• Suitable for cutting wood, plastics and thin metal sheet.Blade 1400 x 6.5 x 0.35mm 24tpi
• Suitable for cutting wood, plastics and thin metal sheet.
• Model No. SM1303B06• Flexible bandsaw blade with hardened steel teeth.
• Suitable for cutting wood, plastics and thin metal sheet.Blade 1400 x 6.5 x 0.35mm 6tpi
Note: Substitute xx for blade pitch at the end of model number, i.e. SM35B/14 is 14tpi blade for SM35CE• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.
• Model No. SM5/113/10• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.Blade 1638 x 13 x 0.63mm 10tpi
Note: Substitute xx for blade pitch at the end of model number, i.e. SM35B/14 is 14tpi blade for SM35CE• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.
• Model No. SM5/113• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.Blade 1638 x 13 x 0.63mm 14tpi
Note: Substitute xx for blade pitch at the end of model number, i.e. SM35B/14 is 14tpi blade for SM35CE• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.
• Model No. SM5/113/24• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.Blade 1638 x 13 x 0.63mm 24tpi
Note: Substitute xx for blade pitch at the end of model number, i.e. SM35B/14 is 14tpi blade for SM35CE• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.
• Model No. SM5/113/6• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.Blade 1638 x 13 x 0.63mm 6tpi
• Suitable for cutting wood, plastics and thin metal sheet.
• Model No. SM1304B10• Flexible bandsaw blade with hardened steel teeth.
• Suitable for cutting wood, plastics and thin metal sheet.Blade 1712 x 10mm 10tpi
• Suitable for cutting wood, plastics and thin metal sheet.
• Model No. SM1304B14• Flexible bandsaw blade with hardened steel teeth.
• Suitable for cutting wood, plastics and thin metal sheet.Blade 1712 x 10mm 14tpi
• Suitable for cutting wood, plastics and thin metal sheet.
• Model No. SM1304B24• Flexible bandsaw blade with hardened steel teeth.
• Suitable for cutting wood, plastics and thin metal sheet.Blade 1712 x 10 x 0.35mm 24tpi
• Suitable for cutting wood, plastics and thin metal sheet.
• Model No. SM1304B06• Flexible bandsaw blade with hardened steel teeth.
• Suitable for cutting wood, plastics and thin metal sheet.Blade 1712 x 10 x 0.35mm 6tpi
Note: Substitute xx for blade pitch at the end of model number, i.e. SM35B/14 is 14tpi blade for SM35CE• Bandsaw blades with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.
• Model No. SM354B14• Bandsaw blades with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.Blade 2110 x 20 x 0.8mm 14tpi
Note: Substitute xx for blade pitch at the end of model number, i.e. SM35B/14 is 14tpi blade for SM35CE• Bandsaw blades with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.
• Model No. SM354B03• Bandsaw blades with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.Blade 2110 x 20 x 0.8mm 18tpi
Note: Substitute xx for blade pitch at the end of model number, i.e. SM35B/14 is 14tpi blade for SM35CE• Bandsaw blades with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.
• Model No. SM354B14• Bandsaw blades with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.Blade 2110 x 20 x 0.8mm 24tpi
Note: Substitute xx for blade pitch at the end of model number, i.e. SM35B/14 is 14tpi blade for SM35CE• Bandsaw blades with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.
• Model No. SM354B610BIM• Bandsaw blades with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.Blade 2110 x 20 x 0.8mm 6/10tpi Vari-Pitch Bi-Metal
• Suitable for cutting wood, plastics and thin metal sheet.
• Model No. SM1305B10• Flexible bandsaw blade with hardened steel teeth.
• Suitable for cutting wood, plastics and thin metal sheet.Blade 2240 x 12 x 0.6mm 10tpi
• Suitable for cutting wood, plastics and thin metal sheet.
• Model No. SM1305B14• Flexible bandsaw blade with hardened steel teeth.
• Suitable for cutting wood, plastics and thin metal sheet.Blade 2240 x 12 x 0.6mm 14tpi
• Suitable for cutting wood, plastics and thin metal sheet.
• Model No. SM1305B24• Flexible bandsaw blade with hardened steel teeth.
• Suitable for cutting wood, plastics and thin metal sheet.Blade 2240 x 12 x 0.6mm 24tpi
• Suitable for cutting wood, plastics and thin metal sheet.
• Model No. SM1305B06• Flexible bandsaw blade with hardened steel teeth.
• Suitable for cutting wood, plastics and thin metal sheet.Blade 2240 x 12mm 6tpi
Note: Substitute xx for blade pitch at the end of model number, i.e. SM35B/14 is 14tpi blade for SM35CE• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.
• Model No. SM35/B14• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.Blade 2362 x 19 x 0.81mm 14tpi
Note: Substitute xx for blade pitch at the end of model number, i.e. SM35B/14 is 14tpi blade for SM35CE• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.
• Model No. SM35/B18• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.Blade 2362 x 19 x 0.81mm 18tpi
Note: Substitute xx for blade pitch at the end of model number, i.e. SM35B/14 is 14tpi blade for SM35CE• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.
• Model No. SM35/B24• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.Blade 2362 x 19 x 0.81mm 24tpi
Note: Substitute xx for blade pitch at the end of model number, i.e. SM35B/14 is 14tpi blade for SM35CE• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.
• Model No. SM35/B04• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.Blade 2362 x 32 x 0.81mm 4 SKIP
Note: Substitute xx for blade pitch at the end of model number, i.e. SM35B/14 is 14tpi blade for SM35CE• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.
• Model No. SM35/B08• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.Blade 2362 x 19 x 0.81mm 8tpi
• Suitable for cutting wood, plastics and thin metal sheet.
• Model No. SM1306B10• Flexible bandsaw blade with hardened steel teeth.
• Suitable for cutting wood, plastics and thin metal sheet.Blade 2400 x 12 x 0.6mm 10tpi
• Suitable for cutting wood, plastics and thin metal sheet.
• Model No. SM1306B14• Flexible bandsaw blade with hardened steel teeth.
• Suitable for cutting wood, plastics and thin metal sheet.Blade 2400 x 12 x 0.6mm 14tpi
• Suitable for cutting wood, plastics and thin metal sheet.
• Model No. SM1306B24• Flexible bandsaw blade with hardened steel teeth.
• Suitable for cutting wood, plastics and thin metal sheet.Blade 2400 x 12 x 0.6mm 24tpi
• Suitable for cutting wood, plastics and thin metal sheet.
• Model No. SM1306B06• Flexible bandsaw blade with hardened steel teeth.
• Suitable for cutting wood, plastics and thin metal sheet.Blade 2400 x 12 x 0.6mm 6tpi
Note: Substitute xx for blade pitch at the end of model number, i.e. SM35B/14 is 14tpi blade for SM35CE• Bandsaw blades with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.
• Model No. SM355B14• Bandsaw blades with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.Blade 2460 x 25 x 0.9mm 14tpi
Note: Substitute xx for blade pitch at the end of model number, i.e. SM35B/14 is 14tpi blade for SM35CE• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.
• Model No. SM353CE/B14• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.Blade 3035 x 25 x 0.89mm 14tpi
• Model No. SM353CE/085• Vari-pitch, Bi-Metal bandsaw blade.Blade 3035 x 25 x 0.89mm 4/6tpi Bi-Metal
Note: Substitute xx for blade pitch at the end of model number, i.e. SM35B/14 is 14tpi blade for SM35CE• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.
• Model No. SM353CE/B04• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.Blade 3035 x 25 x 0.89mm 4tpi
Note: Substitute xx for blade pitch at the end of model number, i.e. SM35B/14 is 14tpi blade for SM35CE• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.
• Model No. SM353CE/B08• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.Blade 3035 x 25 x 0.89mm 8tpi
• Suitable for cutting wood, plastics and aluminium alloy.
• Model No. SMS10B40• Tungsten carbide tipped (TCT) saw blades with hardened steel teeth suitable for cutting wood, plastics and aluminium alloy.Compound Mitre Saw Blade 254 x 25.4mm 40TPU
• Suitable for cutting wood, plastics and aluminium alloy.
• Model No. SMS10B60• Tungsten carbide tipped (TCT) saw blades with hardened steel teeth suitable for cutting wood, plastics and aluminium alloy.Compound Mitre Saw Blade 254 x 25.4mm 60TPU
• Suitable for cutting wood, plastics and aluminium alloy.
• Model No. SMS12B40• Tungsten carbide tipped (TCT) saw blades with hardened steel teeth suitable for cutting wood, plastics and aluminium alloy.Compound Mitre Saw Blade 305 x 25.4mm 40TPU
• Suitable for cutting wood, plastics and aluminium alloy.
• Model No. SMS12B60• Tungsten carbide tipped (TCT) saw blades with hardened steel teeth suitable for cutting wood, plastics and aluminium alloy.Compound Mitre Saw Blade 305 x 25.4mm 60TPU
- Bench Grinders
- Chisel Mortiser
- Clamping
- Cutting Oils
- Drill Bits & Sets
- Dust Extraction
- Extractors
- Files
- Hacksaws
- Hand Tools
- Lathe/Drilling
- Lathes
- Letter & Number Punches
- Log Splitters
- Measuring
- Milling/Drilling
- Miscellaneous
- Pillar Drills
- Planer & Thicknessers
- Punches & Chisels
- Roller Stands
- Sanders
- Sheet Metal Tools
- Thread Cutting
- Trestles
- Vices
- Wire Brushes
- Workbenches