Direct-to-Head Throttle Bodies
Patented technology that helps to increase air flow dramatically thus minimising air flow separation and reduces turbulence, resulting in higher volumetric efficiency.
This pristine technology with Knife-edged butterflies has improved inlet airflow and performance significantly. With the individual Throttle blades very close to the inlet valves, the engine and Throttle response are vastly improved. Along with this, we have also found an impressive increase in Horsepower, Torque, Driveability, and an incredible mechanical soundtrack.
Installation Packages are suitable for Porsche 911 SC - 3.0L engines (Model Years 1974-1985).
Throttle Bodies come fully assembled and ready to bolt directly to the Cylinder Heads, with the following parts included:
• Aerospace Grade Billet Aluminium "Shaft-less" Individual Throttle Bodies.
• Aluminium Inlets/Extensions are suitable for duck or whale tail models.
• Aluminium Ram Pipes.
• Throttle Position Sensors (TPS) Mounting Kits.
• Billet Aluminium Fuel Rails.
• Thermal Insulation Gaskets.
• Throttle Linkage System which connects directly to the existing OEM cable pick-ups.
• Available in 18 anodised colour options.
• Available with 39mm Inlet Ports.
Installation Kit:
• ECU including base map package - Comes complete with full electrical engine harness, Coil pack, HT leads, engine sensors, hardware and software.
• Trigger Wheel & Fan Pulley assembly, including sensor mounting bracket and Distributor blanking plug.
• Fuelling System - Includes Fuel Injectors, Fuel pressure regulator with gauge, Fuel Lines, fittings and hoses to interface with existing fuel system
• Vacuum System - Includes vacuum take-off & idle air control assembly, c/w interfacing pipework for cold start engine idle control & brake boost assit.
• Engine Oil breather system - Includes all filters and interfacing components required.
• Megaflow Air Filtration System - Includes Megaflow Air Filters complete with brushed aluminium pre-drilled Filter back plates.
• Heater duct system.
**please note
Race Mesh Ram Pipe Installation Kit is not included
this is extra product code 102-101-00087-01
Parts are in silver. The contents of these kits may vary, from the images provided
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
102-102-00238-01KIT
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
Patented technology that helps to increase air flow dramatically thus minimising air flow separation and reduces turbulence, resulting in higher volumetric efficiency.
This pristine technology with Knife-edged butterflies has improved inlet airflow and performance significantly. With the individual Throttle blades very close to the inlet valves, the engine and Throttle response are vastly improved. Along with this, we have also found an impressive increase in Horsepower, Torque, Driveability, and an incredible mechanical soundtrack.
Installation Packages are suitable for Porsche 911 SC - 3.0L engines (Model Years 1974-1985).
Throttle Bodies come fully assembled and ready to bolt directly to the Cylinder Heads, with the following parts included:
• Aerospace Grade Billet Aluminium "Shaft-less" Individual Throttle Bodies.
• Aluminium Inlets/Extensions are suitable for duck or whale tail models.
• Aluminium Ram Pipes.
• Throttle Position Sensors (TPS) Mounting Kits.
• Billet Aluminium Fuel Rails.
• Thermal Insulation Gaskets.
• Throttle Linkage System which connects directly to the existing OEM cable pick-ups.
• Available in 18 anodised colour options.
• Available with 39mm Inlet Ports.
Installation Kit:
• GPA ECU including base map package - Comes complete with full electrical engine harness, Coil pack, HT leads, engine sensors, hardware and software.
• Trigger Wheel & Fan Pulley assembly, including sensor mounting bracket and Distributor blanking plug.
• Fuelling System - Includes Fuel Injectors, Fuel pressure regulator with gauge, Fuel Lines, fittings and hoses to interface with existing fuel system
• Vacuum System - Includes vacuum take-off & idle air control assembly, c/w interfacing pipework for cold start engine idle control & brake boost assit.
• Engine Oil breather system - Includes all filters and interfacing components required.
• Megaflow Air Filtration System - Includes Megaflow Air Filters complete with brushed aluminium pre-drilled Filter back plates.
• Heater duct system.
**please note
Race Mesh Ram Pipe Installation Kit is not included
this is extra product code 102-101-00087-01
Parts are in silver. The contents of these kits may vary, from the images provided
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
Patented technology that helps to increase air flow dramatically thus minimising air flow separation and reduces turbulence, resulting in higher volumetric efficiency.
This pristine technology with Knife-edged butterflies has improved inlet airflow and performance significantly. With the individual Throttle blades very close to the inlet valves, the engine and Throttle response are vastly improved. Along with this, we have also found an impressive increase in Horsepower, Torque, Driveability, and an incredible mechanical soundtrack.
Throttle Bodies come fully assembled and ready to bolt directly to the Cylinder Heads, with the following parts included:
• Anodised Aerospace Grade 6082/T6 Billet Aluminium "Shaft-less" Individual Throttle Bodies.
• Anodised Aluminium Inlets/Extensions suitable for flatdeck & ducktail models.
• Aluminium Ram Pipes & Assembly Tool.
• Throttle Position Sensor (TPS).
• Billet Aluminium Fuel Rails, Including PICO 377cc Fuel Injectors.
• Thermal Insulation Gaskets.
• Throttle Linkage System which connects directly to the existing OEM cable pick-ups.
Parts are in silver.
**please note
Race Mesh Ram Pipe Installation Kit is not included
this is extra product code 102-101-00087-01
you will need an EFI Installation & control kit which is not included
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
102-102-00238-01
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Engine Rebuild Kit
- Gaskets & Sets
- Radial Seal / RMS / Camshaft / Balance shaft
- Intermediate shaft (IMS)
- Oil System Parts
- Fuel System Parts
- Belts / Tensioners / Rollers
- Chains & Tensioners
- Timing covers and gaskets
- Engine Bearings / Shells
- Engine Valves / Guides / Springs
- Rocker Arms & Tappets
- Engine Bolts / Studs
- Piston Rings
- Engine Cylinders / Liners / Pistons
- Connecting Rod
- Cylinder Head / Camshaft Carrier
- Camshaft covers / Gaskets
- Camshafts
- Camshaft gears / sprockets and fixings
- Crankcase Parts
- Crankshaft & Parts
- Engine Tinware
- Engine Mounts
- Air Intake & Injection
- Carburetors & Parts
- PMO Carburetors
- Jenvey Throttle Bodies
- Specialist Tools