Driveshafts & Parts
For all 930 4 speed applications and 1978 and later 915.
Spacers are required if you are using with a factory LSD.
Replaces part 930-332-209-12
Sold in pairs.
Notes:
Factory LSD applications will require spacers, otherwise the flanges will be too short.
Designed for use with metal CV gaskets, not paper.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93033223200
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 1978-83 MANUAL cars (Not Turbo) 24 per car
Porsche 911 1984 (Not for Turbo & Turbo look) 24 per car
Porsche 964 C4 Front & Rear
Porsche 993 C4 / C4S Front
Porsche 986 Boxster 1997-02 2.5L / 2.7L
Porsche 996 1997-05 C4 Front
Price is for each bolt.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90006721102
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 964 (911) C4 1989-93
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
Fits:
Porsche 911 1974-86
Price is for each gasket.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
92333229700
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
Fits:
Porsche 911 1969-89
Porsche 964 C2 / Carrera RS / Turbo 3.6L 1989-94
Porsche 928 1983-86 Chassis no from F 92DFS8 41008>> and F92FS8 40290>> M593
Porsche 928 1987-95
Click 'Zoom in' for large parts diagram.
Diagram parts Ref No 3.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91133219100
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
For M10 CV Bolts
Fits:
Porsche 911 1969-89
Porsche 964 C2 / Carrera RS / Turbo 3.6L 1989-94
Porsche 928 1983-86 Chassis no from F 92DFS8 41008>> and F92FS8 40290>> M593
Porsche 928 1987-95
Click 'Zoom in' for large parts diagram.
Diagram parts Ref No 3.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91133219100
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Reconditioned replacement driveshaft
Please note:
Reconditioned units are sold on an exchange basis, A surcharge of £75.00 will be held and then refunded when the old one is returned.
Fits:
Porsche 911 1975-83 (915 Gearbox) Manual cars
Porsche 911 1984 3.2L (915 Gearbox) Manual cars
PLEASE NOTE: The old unit must be returned to Design911 in a built state, not in component pieces.
Price is for each Driveshaft.
- The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
- Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
- Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
- All surcharges and exchanges are subject to our terms and conditions.
PLEASE NOTE:
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
92333203302
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
Fits:
Porsche 911 1975-83 (915 Gearbox) Manual cars
Porsche 911 1984 3.2L (915 Gearbox) Manual cars
Price is for each Driveshaft.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
92333203302
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Overall length: 603mm Flange diameter: 111mm
Fits:Porsche 911 1985-86 (915 Gearbox) Manual cars
Porsche 911 1987-89 (G50 Gearbox) Manual cars
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91133202415
The product you are viewing cross references to these numbers
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Reconditioned replacement driveshaft
Overall length: 603mm Flange diameter: 111mm
Fits:
Porsche 911 1985-86 (915 G15.72/73 Gearbox) Manual cars
Porsche 911 1987-89 (G50 Gearbox) Manual cars
*Reconditioned Drive Shafts are sold on a exchange basis, A surcharge will be held and then refunded when the old one is returned
Price is for each Drive Shaft.
- PLEASE NOTE:
- The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
- Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
- Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
- All surcharges and exchanges are subject to our terms and conditions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91133202415
The product you are viewing cross references to these numbers
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Fits:
Porsche 911 1985-89 Turbo
Porsche 911 1985-89 WideBody
Porsche 911 1985-89 WideBody M491 Spec
Manual cars
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93033203708
The product you are viewing cross references to these numbers
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Reconditioned replacement driveshaft
Please note:
Reconditioned Alternators are sold on an exchange basis, A surcharge of £75.00 will be held and then refunded when the old one is returned.
Fits:
Porsche 911 1985-89 Turbo
Porsche 911 1985-89 WideBody
Porsche 911 1985-89 WideBody M491 Spec
Manual cars
PLEASE NOTE: The old unit must be returned to Design911 in a built state, not in component pieces.
Price is for each Driveshaft.
- The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
- Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
- Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
- All surcharges and exchanges are subject to our terms and conditions.
PLEASE NOTE:
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93033203708
The product you are viewing cross references to these numbers
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Driveshaft, complete with boots and bolts, rear, 476 mm
Fits:
Porsche 930 3.0L / 3.3L 01/1975 - 07/1985 Turbo
Porsche 911 08/83-07/85 Wide Body
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93033203700
The product you are viewing cross references to these numbers
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 3.2 Carrera 1984 to 1989
Porsche 944 1986>>
Porsche 994 S2
Porsche 924S 1986-88
Porsche 928 1978-95
Porsche 986 1992-95
Click 'Zoom in' for large parts diagram.
Diagram ref no 22
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90091009302
The product you are viewing cross references to these numbers
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Driveshaft is a mechanical component for transmitting torque and rotation, usually used to connect other components of a drive train that cannot be connected directly because of distance or the need to allow for relative movement between them.
As torque carriers, drive shafts are subject to torsion and shear stress, equivalent to the difference between the input torque and the load. They must therefore be strong enough to bear the stress, whilst avoiding too much additional weight as that would in turn increase their inertia.
- Clutch Kits
- Clutch Kits - High Performance
- Clutch Friction Plate
- Clutch Pressure Plate
- Clutch Release Bearings
- Clutch Cables & Parts
- Clutch Guide Tube
- Clutch Ring Gear
- Clutch Forks & Levers
- Clutch Bolts
- Gearbox Parts
- Gasket Sets / Gaskets / Seals / Lock Nuts
- Gearbox Mounts
- Gearshift Control Parts
- Flywheel / Torque
- CV Joints Kits
- CV Boots and Kits
- Gearbox Oil
- Gearbox Sump / Oil Pan
- Rear Differential
- Sportomatic
- Sensors
- Transmission Cooling
- Motor Sport Parts