Throttle Body / Plenum Chamber

Drive by wire inlet conversion kit for turbo retrofit with inlet manifold runners. 
Convert to Drive by Wire when retro fitting a turbocharger or supercharger

Fits:
Porsche 911 - 1974 - 1989
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998

911 used 2-Bolt type
964/993 uses 3-Bolt type

Please Note: 
The aluminium or plastic intake plenum(inlet manifold) is not included in the kit

Product Overview:

Inject power and precision into your vintage aircooled engine, now also for turbo or supercharged cars.

To be used when converting a G-Model 911 or a 964/993 engine to a turbocharged/supercharged engine with a 964 induction based Drive by Wire set-up

Conversion kit to a Porsche 964 based intake system to become a DBW (Drive by wire) intake based 74mm original Bosch throttle body (Sometimes referred to as 76mm) specifically executed all in CNC milled billet aluminum.

This is sold either with the intention to convert a Porsche 964/993 engine or to adapt and convert a 964 intake onto a G-model car when turbocharging (That sounds fun!).

Kit includes:

• Throttle body runner for 74mm throttle body in aluminum 
• Vacuum port on throttle body runner
• Original Bosch electronic throttle body
• Original Bosch MAP-T-sensor
• Connecting pipe out of aluminum replacing the resonance tube

Intake runners for the Porsche 911 G-model (2-bolt) or 964/993 (3-bolt) engine are made out of billet aluminium, 3D milled in a 5-axis machine. The port diameter indicated in the options is the diameter of the port in the cylinder head. 

The following parts are to be reused from your original 964 intake:
Rubber boots and clamps
The plenums (inlet manifolds)

Please Note:
Aluminium or plastic intake plenum is not included in the kit and neither are any of the items specifically listed as excluded above.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93011003404

The product you are viewing cross references to these numbers

Drive by wire inlet conversion kit with inlet manifold runners - Billet aluminium version
Convert the G-Model engine to 964/993 induction with Drive by Wire set-up

Fits:
Porsche 911 - 1974 - 1989

Please Note: 
The aluminium or plastic intake plenum(inlet manifold) is not included in the kit

Product Overview:

Inject power and precision into your vintage aircooled engine

Conversion kit for the 911 G-model to become a DBW (Drive by wire) intake based on the 964 induction and using the 74mm original Bosch throttle body (Sometimes referred to as 76mm). This is intended to breathe a bit more life into a classic G-model.

The kit includes

• Throttle body runner for 74mm throttle body
• Original Bosch electronic throttle body
• Original Bosch MAP-T-sensor
• Resonance tube
• Vacuum solenoid
• Connectors and hose
• Vacuum check valve
• Intake runners for the Porsche 911 G-model engine

Intake runners are made out of billet aluminium, 3D milled in a 5-axis machine. The port diameter indicated in the options is the diameter of the port in the cylinder head. Please note that these are the 2-bolt designs. 

To create a bit of intimacy between you and your engine we have included a bit of DIY work for you to convert your existing Porsche 964 intake into this version. 

The intake also exists in two versions - This is the premium version where the throttle body runner is milled out of a billet in aluminum. This is the pinnacle of craftmanship giving a very solid feel to the intake at a natural premium. Both options have the same performance and the same durability with the difference being the look and feel of a 5-axis machined piece as the very first thing you lay your eyes on when you open the engine decklid!

For both options the lower resonance tube is made from our usual modified PA12 in black.

The following parts will be reused from the 964 intake:

• Rubber boots and clamps
• Vacuum reservoir
• The aluminium or plastic plenums
• Resonance flap, actuator and shaft

Please Note: 
The aluminium or plastic intake plenum is not included in the kit and neither are any of the items specifically listed as excluded above.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96411090130

The product you are viewing cross references to these numbers

Drive by wire inlet conversion kit with inlet manifold runners.
Convert the G-Model engine to 964/993 induction with Drive by Wire set-up

Fits:
Porsche 911 - 1974 - 1989

Please Note: 
The aluminium or plastic intake plenum(inlet manifold) is not included in the kit

Product Overview:

Inject power and precision into your vintage aircooled engine

Conversion kit for the 911 G-model to become a DBW (Drive by wire) intake based on the 964 induction and using the 74mm original Bosch throttle body (Sometimes referred to as 76mm). This is intended to breathe a bit more life into a classic G-model.

The kit includes

• Throttle body runner for 74mm throttle body
• Original Bosch electronic throttle body
• Original Bosch MAP-T-sensor
• Resonance tube
• Vacuum solenoid
• Connectors and hose
• Vacuum check valve
• Intake runners for the Porsche 911 G-model engine

Intake runners are made out of billet aluminium, 3D milled in a 5-axis machine. The port diameter indicated in the options is the diameter of the port in the cylinder head. Please note that these are the 2-bolt designs. 

To create a bit of intimacy between you and your engine we have included a bit of DIY work for you to convert your existing Porsche 964 intake into this version. 

The intake also exists in two versions - this version is what we at Islandworks use with all other intakes, being a modified PA12 material from an industrial manufacturing process. Both options have the same performance and the same durability with the difference being the look and feel of a 5-axis machined piece as the very first thing you lay your eyes on when you open the engine decklid!
For both options the lower resonance tube is made from our usual modified PA12 in black.

The following parts will be reused from the 964 intake:

• Rubber boots and clamps
• Vacuum reservoir
• The aluminium or plastic plenums
• Resonance flap, actuator and shaft

Please Note: 
The aluminium or plastic intake plenum is not included in the kit and neither are any of the items specifically listed as excluded above.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96411090130

The product you are viewing cross references to these numbers

Patented technology that helps to increase air flow dramatically thus minimising air flow separation and reduces turbulence, resulting in higher volumetric efficiency.

This pristine technology with Knife-edged butterflies has improved inlet airflow and performance significantly. With the individual Throttle blades very close to the inlet valves, the engine and Throttle response are vastly improved. Along with this, we have also found an impressive increase in Horsepower, Torque, Driveability, and an incredible mechanical soundtrack.

Throttle Bodies come fully assembled and ready to bolt directly to the Cylinder Heads, with the following parts included:

• Anodised Aerospace Grade 6082/T6 Billet Aluminium "Shaft-less" Individual Throttle Bodies.
• Anodised Aluminium Inlets/Extensions suitable for flatdeck & ducktail models.
• Aluminium Ram Pipes & Assembly Tool.
• Throttle Position Sensor (TPS).
• Billet Aluminium Fuel Rails, Including PICO 377cc Fuel Injectors.
• Thermal Insulation Gaskets.
• Throttle Linkage System which connects directly to the existing OEM cable pick-ups.

you will need an EFI Installation & control kit which is not included

**please note
Race Mesh Ram Pipe Installation Kit is not included
this is extra product code 102-101-00086-01 The contents of these kits may vary, from the images provided

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

102-102-00239-01

The product you are viewing cross references to these numbers

Throttle Body Flap Tension Spring.



Fits
Porsche 911 1972-89
Porsche 911 (930) Turbo 1975-89
Porsche 964 Turbo 3.3L / 3.6L 1991-94

Click 'Zoom in' for large parts diagram.
Diagram ref no 10.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93011049700

The product you are viewing cross references to these numbers

Throttle Position Switch.

or

Fits:
Porsche 911 1984-89
Porsche 924 S 1986-88
Porsche 944 / 944 S / 944 S2 1982-91

Click 'Zoom in' for large parts diagram.
Diagram ref no 5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94460611301

The product you are viewing cross references to these numbers

Throttle screw.



Fits:
Porsche 911 Carrera 3.2L 1984-89
Porsche 924S 1986-88
Porsche 944 1982-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 18

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93011091900

The product you are viewing cross references to these numbers

Throttle Valve Switch

or

Fits:
Porsche 911 Carrera 3.2L 1984-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 15.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94460611301

The product you are viewing cross references to these numbers