Flywheel / Torque

Clutch flywheel with starter ring Light weight. Porsche 911 1965-68 / 914-6 70-76
6 Bolt type 215mm



Fits:
Porsche 911 2.0L 1965-69 (not for 912)
Note: early 911's might need to change the starter motor to later type (part number 901604102DX)

Porsche 914 1970-76 (6 cylinder only 914-6)

Lightweight Flywheel with starter ring for Porsche 911 65 - 69

The flywheel with starter ring is an important component in the drive system of a vehicle, including the Porsche 911 from 1965 to 1969. This component has a crucial function in starting the engine.

The flywheel is a round plate that is connected to the crankshaft bearing. It serves as a support for the starter ring, which in turn is connected to the vehicle's starter motor. The starter ring consists of a series of teeth or cams that allow it to mesh with the starter motor. When the driver turns the ignition key, the starter motor is activated and engages the starter ring to turn the crankshaft and start the engine.

The flywheel with starter ring for Porsche 911 from 1965 to 1969 is specially designed and manufactured for these model years. It is made of high quality material to ensure reliable performance and durability. The starter ring is precision manufactured to provide a secure and smooth connection with the starter motor.

When servicing or repairing the drive system of a 1965 to 1969 Porsche 911, it may be necessary to inspect or replace the flywheel with starter ring. Damage or signs of wear can impair the performance of the starter or lead to starting problems. In such cases, it is advisable to replace the defective component with a high-quality spare part to restore optimum engine function.

The flywheel with starter ring is an important element for the smooth starting of the engine of a Porsche 911 from 1965 to 1969. By regular maintenance and the use of high-quality spare parts, car owners can ensure the reliability of their vehicle and improve the driving experience.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90110202602

The product you are viewing cross references to these numbers

Clutch flywheel with starter ring. Porsche 911 1965-68 / 914-6 70-76
6 Bolt type 215mm



Fits:
Porsche 911 2.0L 1965-69 (not for 912)
Note: early 911's might need to change the starter motor to later type (part number 901604102DX)

Porsche 914 1970-76 (6 cylinder only 914-6)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90110202602

The product you are viewing cross references to these numbers

Flywheel.
6 Bolt type 215mm



Fits:
Porsche 911 2.0L 1965-69 (not for 912)
Note: early 911's might need to change the starter motor to later type (part number 901604102DX)

Porsche 914 1970-76 (6 cylinder only 914-6)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90110202602

The product you are viewing cross references to these numbers

Speedi Sleeve for Flywheel End Sealing Surface.



Fits: Crankshaft Flywheel Hub End

Fits:
Porsche 356 1950-65
Porsche 912 1965-69

Speedi Sleeves to Repair Worn, Grooved Seal Surfaces

Over time, sealing surfaces will become grooved, making a good seal impossible.The most economical and fastest method of shaft repair is to install the CR Speedi Sleeve. Speedi Sleeve is a precision engineered piece of stainless steel. It's ultra-thin wall design allows it to be used without changing the sel size ans its finish is perfect for lip sealing applications. Speedi Sleeve is built with removable installation flange. The installation tool included in every box allows the seal to be put in. This avoids the possibility of distortion from heat or other installation methods

Dowel Pin For Flywheel. Sold as EACH. 8 required per engine.



Fits:
Porsche 912
Porsche 356

Click 'Zoom in' for large parts diagram.
Diagram ref no 3

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90010900400

The product you are viewing cross references to these numbers

Flywheel Gasket.



Fits:
Porsche 356 (not for CARRERA)
Porsche 912 1965-69

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

50202301

The product you are viewing cross references to these numbers

Flywheel HD gland nut.



Thread count 1.5mm

Fits:
Porsche 356
Porsche 912

Machined from 4140 steel and tested to 700 lb-ft of torque (Porsche factory recommended torque is 400-450 lb-ft).  Fits all 356 and 912 engines.

Note: Each time the gland nut is removed, it must be replaced with a new one.

Click 'Zoom in' for large parts diagram.
Diagram ref no 7

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

61610202501

The product you are viewing cross references to these numbers

Flywheel Porsche 912 1965-69
Size: 200mm



Fits:
Porsche 912 1965-69

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

61610220401

The product you are viewing cross references to these numbers

Flywheel Spacer.



Use only one flywheel spacer to achieve proper crankshaft end play

Fits:
Porsche 356 (not for Super 90)
Porsche 912 1965-69

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

36902107

The product you are viewing cross references to these numbers

Flywheel spigot bearing.



Fits:
Porsche 911 (901 Gearbox)
Porsche 911 upto 1979 (915 Gearbox)

Click 'Zoom in' for large parts diagram.
Diagram ref no. 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90110202501

The product you are viewing cross references to these numbers

Flywheel spigot bearing.



Fits:
Porsche 911 (901 Gearbox)
Porsche 911 upto 1979 (915 Gearbox)

Click 'Zoom in' for large parts diagram.
Diagram ref no. 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90110202501

The product you are viewing cross references to these numbers

Lightweight Aluminium Flywheel.



Fits:
Porsche 911 2.0L 1965-69 with 901 Gearbox

Features:
• Light-weight for improved performance and drastically reduced M.O.I. (Moment of Inertia)
• Replaceable heat shield (friction surface), no need to surface flywheel
• OEM clutches bolt on for easy installation
• High tolerance manufacturing to insure a perfect hassle free installation
• Designed for normal street use for every day performance enthusiasts
• Stepped dowel pins so they are held captive by the clutch cover
• Racing parts available for the professional
• Highest quality materials like 6061-T6 aluminum for the flywheel, treated steel for the heat shield and OEM quality starter ring gears
• CAD designed/ CNC machined in house for the ultimate in quality control
• One year limited warranty on production components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

106415-11

The product you are viewing cross references to these numbers

Lock washer for bolting the flywheel to the crankshaft.



Fits:
Porsche 356 (1950 to 1965)
Porsche 911 and 912 (1965 to 1969)

Click 'Zoom in' for large parts diagram.
Diagram ref no 11

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

53902103

The product you are viewing cross references to these numbers

Sportomatic Gearbox Shaft Sealing Ring.



Fits:
Porsche 911 1965-83
Porsche 914 1970-76

Click 'Zoom in' for large parts diagram.
Diagram ref no 19

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99911318940

The product you are viewing cross references to these numbers