Elephant racing systems

Centre cooler kit.



Fits:
Porsche 911/930 1965-89

Kit contents:
1x 72-Row Centre Mount Oil Cooler
1x Centre Cooler Mounting Kit
1x Oil Lines Set

A centre mount single-cooler system that mounts directly to the hard lines in the wheel well. Provides high airflow potential of a centre mounted cooler. Requires bodywork to accommodate the centre mount cooler.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0200004

The product you are viewing cross references to these numbers

Center oil cooler Add-on kit.



Fits:
Porsche 911/930 1965-89
with existing Carrera fender mount cooler

Kit contents:
1x 72-Row Centre Mount Cooler
1x Centre Cooler Mounting Kit
1x Oil Line Set

A high-capacity dual-cooler system designed as an add-on to existing Carrera style fender mount coolers. Supplements existing fender-mount cooler with a center mount cooler. Provides a lot of cooler area with the high airflow potential of a center mounted cooler. Requires bodywork to accommodate the center mount cooler.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0200012

The product you are viewing cross references to these numbers

Dual fender cooler Add-on kit.



Fits:
Porsche 911/930 1974-89

Kit contents:
1x Widemouth Carrera Cooler
1x Driver Side Cooler Mounting Kit
1x Set Oil Lines To Connect Two Coolers
1x Oil Line Mounting Kit
1x Passenger Side Cooler Mounting Kit
1x Driver Side Stone Guard Kit

A high-capacity dual-cooler system that fits behind stock bodywork. Designed as an upgrade for cars with an existing passenger side Carrera style cooler. Maintains stock appearance and avoids costly bodywork modifications. Fits behind stock '74-'89 bumpers without modification. Requires relocation of the windshield washer reservoir and the fuel vapor recovery tank.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0200007

The product you are viewing cross references to these numbers

Dual fender cooler kit.



Fits:
Porsche 911/930 1974-89

Kit contents:
2x Widemouth Carrera Coolers
1x Driver Side Cooler Mounting Kit
1x Passenger Side Cooler Mounting Kit
1x Set Oil Lines To Connect Two Coolers
1x Oil Line Mounting Kit
1x Passenger Side Cooler Mounting Kit
2x Stone Guard Kits

A high-quality dual-cooler system that fits behind stock bodywork. Maintains stock appearance and avoids costly bodywork modifications. Fits behind stock '74-'89 bumpers without modification. Requires relocation of the windshield washer reservoir and the fuel vapor recovery tank.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0200014

The product you are viewing cross references to these numbers

Fender cooler and centre cooler kit.



Fits:
Porsche 911/930 1965-89

Kit contents:
1x Widemouth Carrera Cooler
1x 72-Row Center Mount Cooler
1x Fender Cooler Mounting Kit
1x Center Cooler Mounting Kit
1x Oil Line Set
1x Stone Guard Kit

A high-capacity dual-cooler system combining both fender and centre mount coolers. Provides a lot of cooler area with the high airflow potential of a centre mounted cooler. Requires bodywork to accommodate the centre mount cooler.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0200013

The product you are viewing cross references to these numbers

Rear hollow sway Bar.
Kit sold individually -2 required per car



Fits
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998

Save Expensive Thermostats And Oil Lines

Stripped threads are a common problem when removing oil lines from the external thermostat.
The aluminum thermostat threads become fused to the steel tube nut that secures the oil lines. If you get enough leverage to force the nut free, it takes the aluminum threads along with it – destroying the expensive thermostat and the oil line.

Elephant Racing has the solution; we manufacture a 30mm tube nut replacement kit that let's you save thermostats and oil lines.
If your oil lines won't come free from the thermostat, use a cut-off wheel to slit the side of the tube nut. You can then break the nut free using a cold chisel. This technique sacrifices the tube nut to save the expensive thermostat.

You then use our kit to replace the tube nut that was cut off. Both the oil line and the thermostat are saved.

The kit provides a 2-piece tube nut. The threaded nut fits over the end of the tube and is slipped on first. A spring lock ring is then slipped on. The spring lock ring cinches down on the tube, preventing the nut from coming off

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0170000

The product you are viewing cross references to these numbers

Single fender cooler kit.



Fits:
Porsche 911/930 1965-89

Kit contents:
1x Widemouth Oil Cooler
1x Cooler Mounting Kit
1x Pair Oil Hoses to Hard Lines
1x Stone Guard Kit

A basic fender mount single-cooler system similar to those equipped on '84-'89 911 3.2L Carreras.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0200011

The product you are viewing cross references to these numbers

ST/R dual oil cooler Add-on kit for centre fill fuel tank.



Fits:
Porsche 911/930 1965-89

Kit contents:
1x Widemouth Carrera Cooler
All Required Mounting Brackets
Custom Bent Oil Pipes plus Hoses
1x Stone Guard Kit

Retro ST/R type dual cooler setup with plumbing that passes visibly through the front trunk. This add-on kit is for cars that already have an existing Carrera type cooler on the passenger side. Kit attaches directly to finned or factory hard lines in the front wheel well. Includes everything needed including driver-side cooler, custom bent tubing and hoses, mounting brackets and stone guards. Does not fit with the stock fuel tank filler neck, must have a centre fill or similar fuel tank. Requires drilling 4 holes into the trunk to let the tubing pass.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0200018

The product you are viewing cross references to these numbers

ST/R dual oil cooler Add-on kit for stock fuel tank.



Fits:
Porsche 911/930 1965-89

Kit contents:
1x Widemouth Carrera Cooler
All Required Mounting Brackets
Custom Bent Oil Pipes plus Hoses
1x Stone Guard Kit

Retro ST/R type dual cooler setup with plumbing that passes visibly through the front trunk. This add-on kit is for cars that already have an existing Carrera type cooler on the passenger side. Kit attaches directly to finned or factory hard lines in the front wheel well. Includes everything needed including driver-side cooler, custom bent tubing and hoses, mounting brackets and stone guards. Fits with the stock fuel tank filler neck and all fuse panels. Requires drilling 4 holes into the trunk to let the tubing pass.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0200021

The product you are viewing cross references to these numbers

ST/R dual oil cooler kit for centre fill fuel tank.



Fits:
Porsche 911/930 1965-89

Kit contents:
2x Widemouth Carrera Coolers
All Required Mounting Brackets
Custom Bent Oil Pipes plus Hoses
2x Stone Guard Kits

Retro ST/R type dual cooler setup with plumbing that passes visibly through the front trunk. Kit attaches directly to finned or factory hard lines in the front wheel well. Includes everything needed including both coolers, custom bent tubing and hoses, mounting brackets and stone guards. Does not fit with the stock fuel tank filler neck, must have a centre fill or similar fuel tank. Requires drilling 4 holes into the trunk to let the tubing pass.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0200008

The product you are viewing cross references to these numbers

ST/R dual oil cooler kit for stock fuel tank



Fits:
Porsche 911/930 1965-89

Kit contents:
2x Widemouth Carrera Coolers
All Required Mounting Brackets
Custom Bent Oil Pipes plus Hoses
2x Stone Guard Kits

Retro ST/R type dual cooler setup with plumbing that passes visibly through the front trunk. Kit attaches directly to finned or factory hard lines in the front wheel well. Includes everything needed including driver-side cooler, custom bent tubing and hoses, mounting brackets and stone guards. Fits with the stock fuel tank filler neck and all fuse panels. Requires drilling 4 holes into the trunk to let the tubing pass.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0200020

The product you are viewing cross references to these numbers