Engine Modifications & Upgrades
Fits:
Porsche 944 - 1982 to 1985
Porsche 924S - 1981 to 1984
Cars with M44.02 / M44.04 engines
Replaces Porsche part number 944 110 198 01 for Porsche 944 '82 to '85 with the M44.02 and M44.04 engines. 2.5 bar base fuel pressure.
Replacement for Bosch 0 280 160 214
Direct replacement for the OEM Bosch fuel pressure regulators on the Porsche 944 and some other makes and models. Most of these regulators are original and now nearly 40 years old so they are prone to leak or fail causing all sorts of running and tuning issues.
To suit the lower operating fuel pressure of the 3.2 Motronic, we use an adjustable fuel pressure regulator. This simple and elegant design uses steel O-Ring boss sealing adapters to the manifold.
Easily replaceable fuel pressure regulator.
Spare outlet for fuel pressure gauge or sensor.
The adjustable fuel pressure regulator has been tested with Bosch 044 fuel pumps, but the upper limit of fuel flow rate has not been tested.
Kit Includes:
Porsche 944 OEM fitting kit - SPA Adjustable fuel pressure regulator
Fuel pressure regulator body x 1
2.0 to 5.0 adjustable fuel pressure regulator instead of fixed regulator x 1
Adapter fittings to fit OEM hose and fuel rail ends x 1
Hose Tail fitting to fit factory return line x 1
ORB Plug x 2
Applications
This kit must use the adjustable fuel pressure regulator as Bosch does not produce a standard 2.5bar pressure regulator in this form.
Please Note
We have also developed fuel pressure dampers for the 3.2 and 928 engines, check out our site for the product details.
The fuel pressure regulator needs to be adjusted and set on the car after installation to ensure the operating conditions meet the factory specifications. A fuel pressure gauge and fittings to adapt to the factory fuel rails is required to be able to complete this procedure. The regulators are not shipped pre-set to the 2.5bar operating pressure.
We also list the 944 fuel pressure damper as a direct replacement.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94411019801
The product you are viewing cross references to these numbers
- Porsche 924S 2.5L 1986-87
- Porsche 944 2.5L 8V 1982-87
To help remove all the balance shaft belt and ancillary
products on 944/968 which is only way to make the engine run smoother (After
you’ve removed that stuff these bungs to plug up the holes on the engine, so it
does leak from where the shafts used to be).
So, engine will still run without all that balance shaft
belt and ancillary, maybe a bit rougher but will save a bit of engine power not
having to drive all that stuff and engine weight. (Crankshaft/Camshaft timing
is on a separate timing belt on 944/968)
Replacement Porsche part no 94410292300.
Fits:
- Porsche 944S 2.5L 16V 1987-88 M44.40 engines
- Porsche 924S 2.5L 1987-88 M44.10 engines
- Porsche 944S2 3.0L 16V 1989-91 M44.41 engines
- Porsche 944 Turbo 2.5L 8V 1987-91 M44.52 engines
- Porsche 944 Turbo S 2.5L 8V 1988>> M44.52 engines
- Porsche 968 3.0L 1992-94 M44.43 engines
- Porsche 968 Sport 3.0L 1994-95 M44.43 engines
- Porsche 968 CS 3.0L 1993-95 M44.43 engines
- Porsche 968 Turbo S 3.0L 1993-94 M44.43 engines
Click 'Zoom in' for large parts diagram.
Diagram ref no 1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3609509441
The product you are viewing cross references to these numbers
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
For Porsche 944/968
The R-9096 Oil Feed Adapter is a unit that fits in the existing footprint of the oil filter and feeds clean, unrestricted oil to oil accumulator setups. This additional oil feed helps prevent oil starvation that is common in 994 / 968 race-built engines. This additional oil feed helps ensure proper lubrication and contributes to engine longevity. This unit can also be used to feed additional oil coolers to lower the engine's operating temperature.
Material: 6061 T6 Aluminium Alloy ; 4140 High-strength Steel
Finish: Red Anodized ; Nickel Plated
Weight: 0.9 lbs.
Models: 944 & 968 model Porsches
Installation: Installation instructions included.
Miscellaneous: Allows clean, unrestricted oil to oil accumulator setups.
For Installation instructions please CLICK HERE
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Four anodized aluminum bearing blocks included to a set.
Shaft size: 24.4mm - please measure before ordering
Fits:
Porsche 944 / S / S2 / Turbo '82-91
944 torque tube bearings have not been available from Porsche or as an aftermarket. Factory new torque tube costs over £3000 which is always too much for 944 as the car price is so low. So this product would be a solution for 944 with worn out torque tube bearings. Bearing could be used in both street and racing. It is used to rebuild any 944 torque tube.
Fits part number 1 on diagram.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3601109441
The product you are viewing cross references to these numbers
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
Four anodized aluminum bearing blocks included to a set.
Shaft size: 25.5mm - please measure before ordering
Fits:
Porsche 944 / S / S2 / Turbo '82-91
944 torque tube bearings have not been available from Porsche or as an aftermarket. Factory new torque tube costs over £3000 which is always too much for 944 as the car price is so low. So this product would be a solution for 944 with worn out torque tube bearings. Bearing could be used in both street and racing. It is used to rebuild any 944 torque tube.
Fits part number 1 on diagram.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3601109442
The product you are viewing cross references to these numbers
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- IRIDIUM POWER Spark Plugs
- IRIDIUM RACING Spark Plugs
- Hi Flow Air Filters
- Air Induction Kits
- Silicone Hoses / Kits
- Short GearShift Kits
- ECU Reader / Fault Finder
- Fuel Additives
- Pedals / Floor Boards / Track Mats LHD Cars
- Pedals / Floor Boards / Track Mats RHD Cars
- Fire Extinguisher Mounts
- Brey-Krause Fire Extinguisher Mount
- Tow Eye Hooks & Tie Downs
- Track & Race Coolant Radiators
- Wössner Forged Piston Kit
- Wössner Steel Connecting Rods
- CP Carrillo Connecting Rods
- Brake Hoses Stainless Steel Goodridge