Engine Modifications & Upgrades
Includes separate inserts for varying densities
Includes all 3 inserts for varying densities
Shore ratings 65A Street
Shore ratings 75A Fast Road (including in engine mounts)
Shore ratings 85A Track
Fits:
Porsche 964 C2 / C4 / RS / Turbo
Porsche 993 C2 / C4 / RS / Turbo
Porsche 996 C2, C4, C4S, Turbo, GT2, GT3
Porsche 997 C2, C2s, C4, C4s, Turbo, GT2, GT3
Replacing your factory engine mounts with these performance semi-solid mounts will dramatically decrease engine movement which then will result in better acceleration and handling of your Porsche.
CNC machined mounts with PU bushes are absolute must have for any car on track or on the street. Very easy to replace by experienced DIYers.
For 911 & Porsche world article / fitment guide pdf please CLICK HERE
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3609309625KIT
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
Fits:
Porsche 911 - 1965 to 1989
Porsche 964 - 1989 to 1994
Our Valve Springs are designed and manufactured to specifically fit the envelope of a Porsche application not a spring from another use.
It operates a higher natural frequency than the original spring for racing and at the very least minimizes damage from over rev in track day situations.
Kit includes
High performance valve spring x 12
High performance valve spring seat x 12
High performance 9mm titanium valve spring retainer disc x 12
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
HP109HSSKIT
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
Patented technology that helps to increase air flow dramatically thus minimising air flow separation and reduces turbulence, resulting in higher volumetric efficiency.
This pristine technology with Knife-edged butterflies has improved inlet airflow and performance significantly. With the individual Throttle blades very close to the inlet valves, the engine and Throttle response are vastly improved. Along with this, we have also found an impressive increase in Horsepower, Torque, Driveability, and an incredible mechanical soundtrack.
Throttle Bodies come fully assembled and ready to bolt directly to the Cylinder Heads, with the following parts included:
• Anodised Aerospace Grade 6082/T6 Billet Aluminium "Shaft-less" Individual Throttle Bodies.
• SLS 3D Printed custom curved Inlets for bonnet clearance around the standard 964/993 models with electronic spoilers.
• Aluminium Ram Pipes & Assembly Tool.
• Throttle Position Sensor (TPS).
• Billet Aluminium Fuel Rails, Including PICO 377cc Fuel Injectors.
• Thermal Insulation Gaskets.
• Throttle Linkage System which connects directly to the existing OEM cable pick-ups.
• Air Filtration System - Includes Megaflow Air Filters complete with brushed aluminium pre-drilled Filter back plates.
Supporting parts that create these Full Plug, Play and Tune - Installation Kits:
• ECU GP Lite (entry level patch loom) including base map package - Comes complete with electrical patch harnesses, hardware, and software.
• Fuelling System - Includes Fuel pressure regulator with gauge, Fuel Lines, fittings, and hoses to interface with existing fuel system
• Vacuum System - Includes vacuum take-off & idle air control assembly, c/w interfacing pipework for cold start engine idle control & brake boost assist.
• Engine Oil breather system - Includes all filters and interfacing components required.
• Heater duct system - with Carbon fibre finish.
**please note
Race Mesh Ram Pipe Installation Kit is not included
this is extra product code 102-101-00086-01 The contents of these kits may vary, from the images provided
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
Patented technology that helps to increase air flow dramatically thus minimising air flow separation and reduces turbulence, resulting in higher volumetric efficiency.
This pristine technology with Knife-edged butterflies has improved inlet airflow and performance significantly. With the individual Throttle blades very close to the inlet valves, the engine and Throttle response are vastly improved. Along with this, we have also found an impressive increase in Horsepower, Torque, Driveability, and an incredible mechanical soundtrack.
Throttle Bodies come fully assembled and ready to bolt directly to the Cylinder Heads, with the following parts included:
• Anodised Aerospace Grade 6082/T6 Billet Aluminium "Shaft-less" Individual Throttle Bodies.
• SLS 3D Printed custom curved Inlets for bonnet clearance around the standard 964/993 models with electronic spoilers.
• Aluminium Ram Pipes & Assembly Tool.
• Throttle Position Sensor (TPS).
• Billet Aluminium Fuel Rails, Including PICO 377cc Fuel Injectors.
• Thermal Insulation Gaskets.
• Throttle Linkage System which connects directly to the existing OEM cable pick-ups.
• Air Filtration System - Includes Megaflow Air Filters complete with brushed aluminium pre-drilled Filter back plates.
Supporting parts that create these Full Plug, Play and Tune - Installation Kits:
• ECU GPA (full harness) including base map package - Comes complete with electrical full harnesses, hardware, and software.
• Fuelling System - Includes Fuel pressure regulator with gauge, Fuel Lines, fittings, and hoses to interface with existing fuel system
• Vacuum System - Includes vacuum take-off & idle air control assembly, c/w interfacing pipework for cold start engine idle control & brake boost assist.
• Engine Oil breather system - Includes all filters and interfacing components required.
• Heater duct system - with Carbon fibre finish.
**please note
Race Mesh Ram Pipe Installation Kit is not included
this is extra product code 102-101-00086-01 The contents of these kits may vary, from the images provided
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
Patented technology that helps to increase air flow dramatically thus minimising air flow separation and reduces turbulence, resulting in higher volumetric efficiency.
This pristine technology with Knife-edged butterflies has improved inlet airflow and performance significantly. With the individual Throttle blades very close to the inlet valves, the engine and Throttle response are vastly improved. Along with this, we have also found an impressive increase in Horsepower, Torque, Driveability, and an incredible mechanical soundtrack.
Throttle Bodies come fully assembled and ready to bolt directly to the Cylinder Heads, with the following parts included:
• Anodised Aerospace Grade 6082/T6 Billet Aluminium "Shaft-less" Individual Throttle Bodies.
• SLS 3D Printed custom curved Inlets for bonnet clearance around the standard 964/993 models with electronic spoilers.
• Aluminium Ram Pipes & Assembly Tool.
• Throttle Position Sensor (TPS).
• Billet Aluminium Fuel Rails, Including PICO 377cc Fuel Injectors.
• Thermal Insulation Gaskets.
• Throttle Linkage System which connects directly to the existing OEM cable pick-ups.
• Air Filtration System - Includes Megaflow Air Filters complete with brushed aluminium pre-drilled Filter back plates.
Supporting parts that create these Full Plug, Play and Tune - Installation Kits:
• ECU including base map package - Comes complete with electrical patch harnesses, hardware, and software.
• Fuelling System - Includes Fuel pressure regulator with gauge, Fuel Lines, fittings, and hoses to interface with existing fuel system
• Vacuum System - Includes vacuum take-off & idle air control assembly, c/w interfacing pipework for cold start engine idle control & brake boost assist.
• Engine Oil breather system - Includes all filters and interfacing components required.
• Heater duct system - with Carbon fibre finish.
**please note
Race Mesh Ram Pipe Installation Kit is not included
this is extra product code 102-101-00086-01 The contents of these kits may vary, from the images provided
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
The air duct is directed up towards the boot lid where air is forces into the air duct and then into the air box
Fits:
Porsche 964 C2/C4 1989-1994
Porsche 993 C2/C4 1994-1997
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
964167004
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
Comes complete with thermal insulating manifold gaskets
Fits:
Porsche 964 - 1989 to 1993
Porsche 993 - 1994 to 1998
Tailored for GT3 Type Intakes:
Specially designed to fit GT3 intake manifolds (with built-in offsets) perfectly accommodating the narrower 964/993 engines.
Product Overview:
Crafted from top-quality aircraft aluminum, our Porsche 964/993 to GT3 Billet Intake Runners offer optimal performance.
Available in head diameters of 41.5mm, 42.5mm, 44mm or 45.8mm with standard injector sizes.
Versatile Compatibility and Configurations:
Compatible with standard rails or engineered for use with the IslandWorks/Nuke system, featuring a direct mount fuel regulator.
Superior Craftsmanship and Finish:
Each runner boasts a natural machined finish and includes a base gasket insulator, ensuring optimal performance.
Important Note:
To ensure effective heat insulation, this product requires a flat cylinder head seal, offering better performance compared to the usual seal type.
Supplied with reinforced high thermal plastic gaskets for thermal insulation
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
96411071101
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Comes complete with manifold gaskets
Fits:
Porsche 964 - 1989 to 1993
Porsche 993 - 1994 to 1998
For use with the standard 964/993 inlet manifolds and 3 bolt manifolds
Product Details:
Replace your aging plastic intake runners on the Porsche 964/993 with meticulously 3D milled billet versions in aircraft aluminum, offering durability and aesthetic enhancement.
Enhanced Specifications:
Available in head diameters of 41.5mm or 42.5mm, paired with standard injector sizes.
Flexible Compatibility and Configurations:
Compatible with standard rails
Important Note:
To ensure effective heat insulation, this product requires a flat cylinder head seal, offering better performance compared to the usual seal type.
Supplied with reinforced high thermal plastic gaskets for thermal insulation
Craftsmanship and Finish:
Featuring a natural machined finish, these runners are equipped with a base gasket insulator for
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99311071250
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Fits:
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998
Also Fits
Porsche 911 - 1974 to 1989 fitted with Adapt Motorsport Inlet Manifold Adaptor Kit
Available in Anodised Dark Silver or Anodised Black
Our billet and anodised fuel rail set bolts directly to the standard 964 / 993 intake adaptors as well as our own 2 bolt adaptor kits for earlier 2.7ltr, 3.0ltr and 3.2ltr engines.
Using O ring fittings to the fuel rail, and AN 6 JIC fittings this allows for a very flexible choice of fuel hose arrangements.
Replicate the factory 964 system, or the 993 system, or really simplify and use a dead head system.
Rails are shipped with a combination of fittings or plugs.
This set makes it very easy to add fuel pressure sensing to the rails for those that want to tune, log or use protection strategies in your aftermarket ECU setup.
Check out our matching fuel pressure regulator to complete your fuel system today
Kit Includes:
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93011045900
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
Option for cars retaining air conditioning.
Fits:
Porsche 964 (89-94) (w/ Air Conditioning)
- Replacement for 96410205001.
- For use with Steel OEM Hub or (96410205001/2) replacement hub.
- Requires (99310605180/1) single belt conversion hub.
- We also recommend our (3609001604) billet fan pulley halves.
Billet Aluminum Crankshaft Pulley for Single Belt Conversion is a meticulously crafted and high-performance automotive component. Engineered from premium-quality aluminum billet, it offers superior strength and durability. This precision-designed pulley is specifically tailored for single belt conversions, providing seamless power transfer and optimal performance. Its lightweight construction ensures reduced rotational mass, resulting in improved engine responsiveness and enhanced overall driving experience. Upgrade your Porsche with this exceptional crankshaft pulley, and enjoy the perfect balance of style and functionality.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3609001402
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
Fits:
Porsche 964 (89-94) (Integrated Hub)
Integrated hub machined into the pulley.
- Replacement for Porsche OE pulley No 96410205001.
- Requires (99310605180/1) single belt conversion hub.
- We also recommend our (3609001604) billet fan pulley halves.
Billet Aluminum Crankshaft Pulley for Single Belt Conversion is a meticulously crafted and high-performance automotive component. Engineered from premium-quality aluminum billet, it offers superior strength and durability. This precision-designed pulley is specifically tailored for single belt conversions, providing seamless power transfer and optimal performance. Its lightweight construction ensures reduced rotational mass, resulting in improved engine responsiveness and enhanced overall driving experience. Upgrade your Porsche with this exceptional crankshaft pulley, and enjoy the perfect balance of style and functionality.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3609001401
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
Pulley hub for 89-94 964 tapered snout crankshaft.
Machined from heat treated alloy steel and yellow zinc plated these are exact reproduction of OEM part.
For OEM replacement or use with 3609001402 single belt pulleys.
Fits:
Porsche 964 ('89-'94) Crankshaft Pulley Hub
for Tapered Snout Crankshaft
*Pulley in image is not included.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
96410205001
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
Convert to Drive by Wire when retro fitting a turbocharger or supercharger
Fits:
Porsche 911 - 1974 - 1989
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998
911 used 2-Bolt type
964/993 uses 3-Bolt type
Please Note:
The aluminium or plastic intake plenum(inlet manifold) is not included in the kit
Product Overview:
Inject power and precision into your vintage aircooled engine, now also for turbo or supercharged cars.
To be used when converting a G-Model 911 or a 964/993 engine to a turbocharged/supercharged engine with a 964 induction based Drive by Wire set-up
Conversion kit to a Porsche 964 based intake system to become a DBW (Drive by wire) intake based 74mm original Bosch throttle body (Sometimes referred to as 76mm) specifically executed all in CNC milled billet aluminum.
This is sold either with the intention to convert a Porsche 964/993 engine or to adapt and convert a 964 intake onto a G-model car when turbocharging (That sounds fun!).
Kit includes:
Intake runners for the Porsche 911 G-model (2-bolt) or 964/993 (3-bolt) engine are made out of billet aluminium, 3D milled in a 5-axis machine. The port diameter indicated in the options is the diameter of the port in the cylinder head.
The following parts are to be reused from your original 964 intake:
Rubber boots and clamps
The plenums (inlet manifolds)
Please Note:
Aluminium or plastic intake plenum is not included in the kit and neither are any of the items specifically listed as excluded above.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93011003404
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
Convert the 964/993 induction to 996 GT3 Drive by Wire set-up
Fits:
Porsche 964 - 1989 to 1993
Porsche 993 - 1994 to 1998
Product Overview:
Inlet conversion kit consists of the throttle body runner and the resonance tube. This is what you need to convert a Porsche 996 GT3 MK1 or MK2 plenum to fit on a Porsche 964 engine. This kit is solid and made from a modified PA12 material making the original Porsche parts feel old and flimsy in comparison.
Components Include:
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
96411012800
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
Convert the 964/993 induction to Drive by Wire set-up
Fits:
Porsche 964 - 1989 to 1993
Porsche 993 - 1994 to 1998
Product Overview:
Transform your Porsche 964's performance with this sleek and high-tech intake kit designed for Porsche 964/993. This innovation marks a transition from the typical accelerator cable-based throttle to an electronic "drive by wire" throttle body. This advanced change streamlines the intake system by eliminating unnecessary components, resulting in a cleaner engine bay appearance.
This modification offers a more drivable setup for highly tuned engines while incorporating the precision of a drive by wire (DBW) throttle.
This enhanced drivability is a key feature for a tuned aircooled engine and allows for smooth idle control with a cold as well as a hot engine. It simply makes the engine feel more modern as compared to the old ITB (individual throttle bodies) setups lacking in mid range torque and difficulties with the idle control.
Precision-Engineered Components:
- 82mm Throttle Body with Reinforced Industrial PA12 Manifold
- CNC-Milled Intake Manifold Stacks Crafted from Billet Aluminium
- Included Rubber Boots and Clamps for Easy Installation
- Islandworks Resonance Tube with Valve and Solenoid, Manufactured from the Same PA12 Material
- Integrated Manifold Pressure and Temperature Sensors
- Essential Vacuum Lines for Optimal Performance
Kit Includes
Complete intake with all the parts seen in the image manufactured from modified PA12 using an industrial process. This intake plenum has been optimized to fit on a Porsche 964 or Porsche 993 and includes all vacuum ports for both brake vacuum and to maneuver the resonance flap.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
96411090100
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Fits
Porsche 964 C2 - 1989 to 1994
Porsche 964 C4 - 1989 to 1994
This kit is a modern update to the 964 (911) ignition system. This system takes the management of the car into the digital age and allows greater control over ignition and fueling.
The kit will replace your restrictive old fashioned air flow meter (barn door) with a modern MAP sensor managed by intake pressures.
The kit is delivered ready to use with a PPT ignition map. We have maps for 3.6 and 3.8 conversions, and either can be pre-installed for you.
Our latest kit now comes with an upgraded ECU and can run a wide band sensor (oxygen sensor).
Our kits include this capability but the sensor needs to be ordered separately.
While developing the upgraded ECU we also changed our intake pipe; this now works with the factory airbox, gives a stock appearance in the engine bay and houses the map sensor and air temp sensor out of sight.
Kit includes:
• Delta 700 ECU
• Direct plug in wiring loom
• Map Sensor and air temp sensor
• Air intake pipe
• 6 Bosch injectors
• Vacuum pipe and T connector
• Support and service by PIE Performance
• Can Bus data connection tool
All our kits are 100% reversible, with no need to drill or alter components, we utilise what already exists
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
964PPT
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
Engine case hardware set, titanium.
Air-cooled Porsche 911 complete engine case hardware kit in high-strength high-purity Titanium alloy.
Includes studs:
For 911
Ti Alloy studs x 57
12 Point Ti Alloy Lock Nuts x 57
For 964/993
Ti Alloy studs x 62
12 Point Ti Alloy Lock Nuts x 62
Porsche Motorsports employed titanium alloy engine case fasteners on many of their famous race cars, including the 904, 908, 935, 962, and some modern LMP2.
Fits:
Porsche 911 3.0ltr / 3.3ltr
Porsche 964
Porsche 993
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
Engine case through bolt set, titanium.
Kit Contents
Ti Alloy Studs x 11
Ti Alloy Washers x 22
Ti Alloy 12-point Nuts x 11
Porsche Motorsports employed titanium alloy engine case fasteners on many of their famous race cars, including the 904, 908, 935, 962, and some modern LMP2.
Fits:
Porsche 911
Porsche 964
Porsche 993
Air-cooled Porsche 911 engine case through bolts in high-strength high-purity Titanium alloy. Including studs, washers, and nuts.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SL-TB-
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
Separate inserts available for varying densities
Shore ratings 65A Street (available separately)
Shore ratings 75A Fast Road (included in engine mounts)
Shore ratings 85A Track (available separately)
Fits:
Porsche 964 C2 / C4 / RS / Turbo
Porsche 993 C2 / C4 / RS / Turbo
Porsche 996 C2, C4, C4S, Turbo, GT2, GT3
Porsche 997 C2, C2s, C4, C4s, Turbo, GT2, GT3
Please note: the threads needs to be treated with loctite before installation (not sold with the product).
Replacing your factory engine mounts with these performance semi-solid mounts will dramatically decrease engine movement which then will result in better acceleration and handling of your Porsche.
CNC machined mounts with PU bushes are absolute must have for any car on track or on the street. Very easy to replace by experienced DIYers.
For 911 & Porsche world article / fitment guide pdf please CLICK HERE
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3609309625
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
SET OF 2 Includes three pairs of inserts in varying densities
Fits:
Porsche 964/993/996/997
The Rennline Tune-able Engine Mount for the 964, 993, 996, and 997 offers the ultimate in adjust ability for your car. Replacing your compliant factory mounts will decrease engine movement resulting in better acceleration, handling and significantly increased shifter feel. This is the ultimate solution for almost any car, and allows you to tune our mounts for the way you drive. Our mounts are CNC machined from billet aluminium and include three pairs of inserts in varying densities. Tune your mounts by using the softer inserts to reduce engine slop and avoid missed shifts in your street car, or utilise the stiffest inserts to get the most from a more focused track car. You can even mix and match, giving you 9 possible combinations to let you dial in our mount to your specifications. Here at Rennline we know you want your Porsche to be flawless, and that is why we are Driven to Improve Excellence.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
M18
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
SET OF 2
Fits:
Porsche 964
Porsche 993
Porsche 996
Porsche 997
Solid engine mounts are a smart upgrade to any track or aggressive street car, and were installed on Porsche factory race cars. Stock mounts are made of compliant rubber, and contribute to imprecise shifting and inferior throttle response. Solid mounts create slightly more interior vibration than rubber mounts, but securely connect the engine and transmission assembly to the car's unibody, creating a crisper throttle response and shifter feel. Rennline's solid mounts are CNC machined from 6061 aluminum for strength and light weight, and come as a pair with new Grade 8 mounting hardware. Sold as a set of (2)
Motorsport Product
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
M08
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
Fits:
Porsche 964 1989-94
Porsche 993 1995-98
Replacement for Porsche OE numbers 96410651102, 93010650900, 93010651000,
The single fan belt aluminum pulley is a compact and lightweight component designed to efficiently transfer power from the engine to the cooling fan. Its sleek aluminum construction ensures durability while reducing overall weight, allowing for improved engine performance and enhanced fuel efficiency. With its streamlined design, this pulley delivers reliable and smooth operation, contributing to the optimal functioning of the cooling system.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3609001604
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Replacement for 96410651102, 93010650900, 93010651000,
Fits:
Porsche 964 1989-94
Porsche 993 1995-98
CNC machined from 7075 aircraft alloy and hard anodized for wear. These pulleys are half the weight of the factory part, spin true and make an awesome appearance upgrade.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
RS-164B
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Fits:
Porsche 964 Carrera 2 - 1989 to 1994
Porsche 964 Carrera 4 - 1989 to 1994
Porsche 964 RS - 1991 to 1993
Porsche 928 S4 / GTS - 07/1988 to 1994
Replaces Bosch 0280160297, and Porsche 92811019825 & 92811019804 & 92811019803 - 3.8 Bar (engine running, no vacuum line connected)
A direct replacement for the OEM Bosch fuel pressure regulators used in many Porsche, Volvo, Mercedes and other makes.
Our fuel pressure regulator uses the latest Bosch regulators and by default is shipped with a 3.8bar regulator to be a direct replacement. It is available in alternative pressures of 3.0, 3.5, and 4.0 Bar pressures. This simple and elegant design uses steel O-Ring boss sealing adapters to the manifold with multiple options for hose connections.
Easy to replace regulator with Bosch OEM reliability
3 outlet ports for flexible hose, fitting, gauge, sensor port options
The Bosch regulator is rated to a maximum fuel flow of 200lpm.
Kit Includes:
* Mounting bracket not included. Fits to factory regulator bracket or our bracket if required for additional cost.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
92811019825
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
The Porsche part is ugly roto-formed cheap plastic with parting lines whereas accurate replica is carbon fiber.
Saves 8 to 9lbs about 4Kg from the rear of all 964's and 993's. Will not work on C2 Turbos/965 cars.
Replaces blower motor assembly and ductwork and still allows plenty of heat just like the factory RS part.
Ultra cool clear coated real carbon fiber tube that really cleans up engine bay and makes working on engine easy.
Simple do it yourself 20 minute installation that gives you the RS style engine look.
All late model 993's 1996-98 require the 964 early type fan shroud (as shown on exploded image)
Can be added below
fits:
Porsche 964 C2/C4 1989-1994
Porsche 993 C2/C4 1994-1997
To see a video about this product Click Here
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
964167003
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
Fits
Porsche 911 - 1974 to 1989
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998
Our newly released fuel pressure regulator brackets mount to the Adapt Motorsport fuel pressure regulators to the engine breather cover bolts on top of the classic aircooled engines.
The same as Porsche do for the 964.
Manufactured from CNC machine aluminium and anodised in a dark silver colour, they really add a nice look to any classic Porsche engine bay.
Please Note
Only the regulator brackets and fasteners are included in the kit, the regulator is shown for reference purposes only and not included.
We have a range of different regulators that can be ordered.
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
Fits to oil hose 96420724702
Fits:
Porsche 964/965 1989-94
For freshly rebuilt engines, do not install check valve until first oil change.
Before installing, start your engine and verify/ reference your oil pressure. Drain oil from the engine and oil tank. Remove the rubber oil inlet hose on the right side of the engine directly behind the #6 cylinder. Cut a 1.5" piece out of the center of the horizontal section of the hose. Install the check valve with the correct orientation and tighten the clamps. Reinstall the hose and refill engine oil.
Check your oil pressure gauge when you start your engine and verify pressure.
Note: the valve is clearly marked with an engine side and a tank side. Failure to install the check valve in the right orientation will cause oil starvation and catastrophic damage to your engine.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
RS-30B
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
Fits:
Porsche 964 1989-94
Porsche 993 1995-98 All Except -92 Turbos
One of the only weak points on the 964 and 993 chassis is the engine carrier. When these models are tracked, or are fitted with stiffer than stock engine mounts, the engine carrier should be reinforced. If it is not, the carrier is known to bend, crack, or even break cleanly away from an engine mount in response to increased vibration and stress. The Porsche factory was aware of this problem and equipped its race cars with a reinforced engine carrier. Rennline now exclusively offers an engine mount reinforcement gusset kit that can be welded to the engine carrier by your workshop.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
M04
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Fits:
Porsche 964/993 89-98 EXCEPT 95's*. 993's require the 964 fan shroud part # 964.106.403.02 . Many people are using these on 95's but fitment at the base is poor, and we do not recommend installation on this model year.
Rennline’s blower motor bypass pipe is a carbon fiber replica of the factory installed unit found on the lightweight 3.6 RS race cars. This pipe allows you to save 9 pounds from the removal of the factory blower motor assembly, but still have a functioning heater system in your car. Manufactured from ultra strong, lightweight carbon fiber and comes equipped with the aluminum fitting for the distributor breather tube. Available with or without a machined aluminum 3.6 (or 3.8) insignia plate at the top.
Note: Pictures may not show actual product.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
M09
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
Fits:
Porsche 964/993 1989-95 Non VarioCam Cars
*** Will not work on Turbo cars.
Removing the blower motor assembly from your 1989-98 964/993 is a very standard modification for cars that want to loose a few pounds. This modification reduces your cars weight by about 10 pounds and really cleans up the engine bay. This kit is an exact replica as used by Porsche Motorsports for the factory lightweight 964 CUP and 964 RSR race cars. Manufactured from aluminum and is available in Red and Black Powder coat or clear anodized. Comes with all the stainless steel hardware required for a 20 minute installation.
Note: Pictures may not show actual product.
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
Fits:
Porsche 964
Porsche 993
One of the only weak points on the 964 and 993 chassis is the engine carrier. When these models are tracked, or are fitted with stiffer than stock engine mounts, the engine carrier is known to bend, crack, or even break cleanly away from an engine mount in response to increased vibration and stress. The Porsche factory was aware of this problem and equipped its race cars with a reinforced engine carrier. Rennline now offers a tube frame replacement for your factory engine carrier that is proven to be much stronger, and can withhold the stresses of any track day, while offering a 1.4lb weight savings over a gusseted factory carrier. All parts manufactured on cnc equipment and meticulously tig welded, finished with a matte black powdercoat.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
M19
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Fits:
Porsche 911 - 1965 to 1989
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998
Our Valve Springs are designed and manufactured to specifically fit the envelope of a Porsche application not a spring from another use.
It operates a higher natural frequency than the original spring for racing and at the very least minimizes damage from over rev in track day situations.
Please note
993 - must use 8mm Ti retainers and Aasco Seats
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
HP109
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Fits:
Porsche 911 - 1965 to 1989
Porsche 964 - 1989 to 1994
9mm Porsche 911 titanium valve spring retainers for 9mm valves.
Can be used to directly replace OE retainers but we recommend using in conjunction with Aasco HP109 valve springs and HPSS spring seats.
Set of 12
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
HP10T9
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
Fits:
Porsche 911 - 1965 to 1989
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998
Our Steel Spring Seats pocket the inner spring of our Aasco High Performance Valve Springs.
Our Valve Springs are designed and manufactured to specifically fit the envelope of a Porsche application not a spring from another use.
It operates a higher natural frequency than the original spring for racing and at the very least minimizes damage from over rev in track day situations.
Please note
993 - must use 8mm Ti retainers and Aasco Seats
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
HPSS
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Electronic Fuel Injection Throttle Kits
- IRIDIUM POWER Spark Plugs
- IRIDIUM RACING Spark Plugs
- Hi Flow Air Filters
- Air Induction Kits
- Short GearShift Kits
- Performance Plenum
- ECU Reader / Fault Finder
- Exhaust Packages
- Fuel Additives
- Pedals / Floor Boards / Track Mats LHD Cars
- Pedals / Floor Boards / Track Mats RHD Cars
- Fire Extinguisher Mounts
- Brey-Krause Fire Extinguisher Mount
- Tow Eye Hooks & Tie Downs
- Alloy Block Off Plates
- Clutches / Flywheels / Hydraulics
- CP Carrillo Pistons
- CP Carrillo Connecting Rods
- Brake Hoses Stainless Steel Goodridge