Engine Modifications & Upgrades
Refine by Car Type
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
Filter by brand
Aluminum intake plenum kit. Porsche 981 DFI Cayman Spyder/GT4 (3.8L)
Code: IPDKIT81482-38
Aluminum Intake Plenum kit.
Includes 82mm throttle body
Fits:
Porsche 981 DFI Cayman Spyder/GT4 (3.8L)
After a very extensive R & D program we are proud to launch the new 981 IPD 82mm Competition Plenums. We only offer "Competition" versions of the 981 Plenums which upgrades the factory 74mm throttle body with the larger 997 GT3 82mm throttle body. This combination has proven to be considerably more popular and deliver even more performance. This Competition version will work with both 3.4L "S" and 2.7L "Non-S" applications.
The 981 intake is nearly identical to the 987.2 intake. Porsche made a few upgrades with the 981, most notably being that the 981 draws outside air from both driver and passenger air intakes instead of the driver's side only as previously found with all 986, 987 and 987.2 applications. IPD has included a custom silicone hose designed to perfectly fit the larger 82mm TB and considerably improve air flow.
The new 981 Plenums also benefits from the internal dimpling effect that we are now implementing on all future Plenums. This internal dimpling allows us to control the boundary layer and maximize air flow. Just like a dimpled golf ball travels farther than a smooth golf ball. Controlled turbulent air creates less friction and "tumbles" over a given area more efficiently.
Power gains with the 981 Competition Plenum are virtually the same as with the 987.2 Competition Plenum, putting down 20 horsepower and 16 foot pounds of torque at the wheels. The bulk of the power gains from the IPD Plenum begin around 4000 rpm, continues all the way through to redline and become fully realized in the 6000 rpm range. IPD performance gains stay above both factory power curves throughout the entire rev range
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IPDKIT81482-38
The product you are viewing cross references to these numbers
Includes 82mm throttle body
Fits:
Porsche 981 DFI Cayman Spyder/GT4 (3.8L)
After a very extensive R & D program we are proud to launch the new 981 IPD 82mm Competition Plenums. We only offer "Competition" versions of the 981 Plenums which upgrades the factory 74mm throttle body with the larger 997 GT3 82mm throttle body. This combination has proven to be considerably more popular and deliver even more performance. This Competition version will work with both 3.4L "S" and 2.7L "Non-S" applications.
The 981 intake is nearly identical to the 987.2 intake. Porsche made a few upgrades with the 981, most notably being that the 981 draws outside air from both driver and passenger air intakes instead of the driver's side only as previously found with all 986, 987 and 987.2 applications. IPD has included a custom silicone hose designed to perfectly fit the larger 82mm TB and considerably improve air flow.
The new 981 Plenums also benefits from the internal dimpling effect that we are now implementing on all future Plenums. This internal dimpling allows us to control the boundary layer and maximize air flow. Just like a dimpled golf ball travels farther than a smooth golf ball. Controlled turbulent air creates less friction and "tumbles" over a given area more efficiently.
Power gains with the 981 Competition Plenum are virtually the same as with the 987.2 Competition Plenum, putting down 20 horsepower and 16 foot pounds of torque at the wheels. The bulk of the power gains from the IPD Plenum begin around 4000 rpm, continues all the way through to redline and become fully realized in the 6000 rpm range. IPD performance gains stay above both factory power curves throughout the entire rev range
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IPDKIT81482-38
81482
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Cayman GT4 3.8L 2015-16
£1,012.00
Now £961.40
In stock 
AOS Oil / Air Separator UPGRADE for Porsche 987 / 987C
Code: AOSKIT987
Have you suffered from packed up oil separator? Are you worried that it will ruin your track day experience?
This twin chamber conversion kit will put your mind at ease. Porsche has developed Motorsport version of AOS to avoid future problems. Fit and forget.
Fits:
Porsche 987 Boxster
Porsche 987C Cayman
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
AOSKIT987
The product you are viewing cross references to these numbers
This twin chamber conversion kit will put your mind at ease. Porsche has developed Motorsport version of AOS to avoid future problems. Fit and forget.
Fits:
Porsche 987 Boxster
Porsche 987C Cayman
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
AOSKIT987
98710792600
98710794600
98710794700
90006731601
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
£1,426.25
Now £1,354.94
Orderable
Exhaust Package + Plenum 74mm Throttle Body + Induction Kit for Porsche Boxster 987 / Cayman
Code: POWERKIT9873
Milltek Exhaust Package + Plenum 74mm Throttle Body + Induction Kit for Porsche Boxster 987 / Cayman
Kit Includes
- Air Induction Kit
- Plenum by IPD
- Throttle Body 74mm
- Milltek Exhaust Cat back
Fits:
Porsche Boxster 987
Porsche Cayman 987C
Exhaust Muffler / Silencer Rear box (Catalysts Bypass System).
Sports deep sound muffler/exhaust offers a sportive sound and better throttle response. With secondary cat bypass to increased BHP. Milltek system is complete twin adjaustable stainless steel tails. Made from T304 stainless steel.
For the ultimate performance gains we recommend this set is fitted with an ECU remap giving BHP and Torque that you can really feel and superb sports car sound.
Kit Includes
- Air Induction Kit
- Plenum by IPD
- Throttle Body 74mm
- Milltek Exhaust Cat back
Fits:
Porsche Boxster 987
Porsche Cayman 987C
Exhaust Muffler / Silencer Rear box (Catalysts Bypass System).
Sports deep sound muffler/exhaust offers a sportive sound and better throttle response. With secondary cat bypass to increased BHP. Milltek system is complete twin adjaustable stainless steel tails. Made from T304 stainless steel.
For the ultimate performance gains we recommend this set is fitted with an ECU remap giving BHP and Torque that you can really feel and superb sports car sound.
Product Vehicle Group
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Cayman 2.7L 987C 2006-08
£2,319.98
Now £2,203.98
Arriving soon
Exhaust Package + Plenum 74mm Throttle Body + Induction Kit Porsche Boxster 987 / Cayman
Code: POWERKIT9874
Exhaust Package + Plenum 74mm Throttle Body + Induction Kit Porsche Boxster 987 / Cayman
Kit Includes
- Air Induction Kit
- Plenum by IPD
- Throttle Body 82mm
- DesignTek Exhaust Cat back
Exhaust Muffler / Silencer Sports Complete with Twin Stainless Steel Tail Pipes
DesignTek sports deep sound muffler/exhaust offers a sportive sound and better throttle response. With secondary cat bypass to increased BHP. Complete twin adjaustable stainless steel tails. Made from T304 stainless steel.
For the ultimate performance gains we recommend this set is fitted with an ECU remap giving BHP and Torque that you can really feel and superb sports car sound.
Fits:
Porsche Boxster 987
Porsche Cayman 987C
Kit Includes
- Air Induction Kit
- Plenum by IPD
- Throttle Body 82mm
- DesignTek Exhaust Cat back
Exhaust Muffler / Silencer Sports Complete with Twin Stainless Steel Tail Pipes
DesignTek sports deep sound muffler/exhaust offers a sportive sound and better throttle response. With secondary cat bypass to increased BHP. Complete twin adjaustable stainless steel tails. Made from T304 stainless steel.
For the ultimate performance gains we recommend this set is fitted with an ECU remap giving BHP and Torque that you can really feel and superb sports car sound.
Fits:
Porsche Boxster 987
Porsche Cayman 987C
Product Vehicle Group
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Cayman 2.7L 987C 2006-08
£1,712.00
Now £1,626.40
In stock
Exhaust Package + Plenum 82mm Throttle Body + Induction Kit Porsche Boxster 987 / Cayman
Code: POWERKIT9871
Exhaust Package + Plenum 82mm Throttle Body + Induction Kit Porsche Boxster 987 / Cayman
Kit Includes
- Air Induction Kit
- Plenum by IPD
- Throttle Body 82mm
- DesignTek Exhaust Cat back
Exhaust Muffler / Silencer Sports Complete with Twin Stainless Steel Tail Pipes
DesignTek sports deep sound muffler/exhaust offers a sportive sound and better throttle response. With secondary cat bypass to increased BHP. Complete twin adjaustable stainless steel tails. Made from T304 stainless steel.
For the ultimate performance gains we recommend this set is fitted with an ECU remap giving BHP and Torque that you can really feel and superb sports car sound.
Fits:
Porsche Boxster 987
Porsche Cayman 987C
Kit Includes
- Air Induction Kit
- Plenum by IPD
- Throttle Body 82mm
- DesignTek Exhaust Cat back
Exhaust Muffler / Silencer Sports Complete with Twin Stainless Steel Tail Pipes
DesignTek sports deep sound muffler/exhaust offers a sportive sound and better throttle response. With secondary cat bypass to increased BHP. Complete twin adjaustable stainless steel tails. Made from T304 stainless steel.
For the ultimate performance gains we recommend this set is fitted with an ECU remap giving BHP and Torque that you can really feel and superb sports car sound.
Fits:
Porsche Boxster 987
Porsche Cayman 987C
Product Vehicle Group
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche Cayman S 3.4L 987C 2005-08
£1,749.00
Now £1,661.55
In stock
Exhaust Package + Plenum 82mm Throttle Body + Induction Kit Porsche Boxster 987 / Cayman
Code: POWERKIT9872
Milltek Exhaust Package + Plenum 82mm Throttle Body + Induction Kit Porsche Boxster 987 / Cayman
Kit Includes
- Air Induction Kit
- Plenum by IPD
- Throttle Body 82mm
- Milltek Exhaust Cat back
Exhaust Muffler / Silencer Rear box (Catalysts Bypass System).
Sports deep sound muffler/exhaust offers a sportive sound and better throttle response. With secondary cat bypass to increased BHP. Milltek system is complete twin adjaustable stainless steel tails. Made from T304 stainless steel.
For the ultimate performance gains we recommend this set is fitted with an ECU remap giving BHP and Torque that you can really feel and superb sports car sound.
Fits:
Porsche Boxster 987
Porsche Cayman 987C
Kit Includes
- Air Induction Kit
- Plenum by IPD
- Throttle Body 82mm
- Milltek Exhaust Cat back
Exhaust Muffler / Silencer Rear box (Catalysts Bypass System).
Sports deep sound muffler/exhaust offers a sportive sound and better throttle response. With secondary cat bypass to increased BHP. Milltek system is complete twin adjaustable stainless steel tails. Made from T304 stainless steel.
For the ultimate performance gains we recommend this set is fitted with an ECU remap giving BHP and Torque that you can really feel and superb sports car sound.
Fits:
Porsche Boxster 987
Porsche Cayman 987C
Product Vehicle Group
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche Cayman S 3.4L 987C 2005-08
£2,356.98
Now £2,239.13
Arriving soon
IMS Double Row Bearing Direct Oil Feed (DOF) Intermediate Shaft Retrofit Kit for Boxster 986 / 996
Code: IMSDOF9962
IMS KIT DOUBLE ROW STEEL BEARING
Before ordering, it is necessary to identify which bearing size you need. There are two types of bearings (Single row and Double row) used in these engines. This kit comes with DOUBLE row bearing.
Fits:
Porsche 986 Boxster 1997 -2004
Porsche 996 Carrera 1997 -2004
Kit Includes:
Patented DOF Flange with anti-rust zinc plating
IMS Bearing
3 micro-encapsulated Porsche bolts
Spacer for bearing
Engine oil port adapter with crush ring
Cam Plug
3,000psi hydraulic hose
Fitting for hose
Thread locker
Installation instructions
The direct oil feed (DOF) solution uses a patent pending custom made Intermediate Shaft Flange that utilizes a direct oil feed to the original Intermediate Shaft Bearing. It uses an adapted pressure fed oil line from a positive oil pressure feed on the cylinder head directly to an opening in the custom Intermediate Shaft Flange. This feeds fresh oil directly to the open end of the IMS bearing (after removing the seal to expose the ball bearings on the IMS bearing). By using a positive oil feed from the engine's cylinder head valve cover, there will always be a consistent flow of oil directed to the open end of the intermediate shaft bearing.
This is a cost effective way to help protect against a possible IMS bearing failure, using the original bearing. The system, however can also be used when replacing the bearing with a new SKF steel ball bearing for added insurance with a new, zero mile bearing.
For Installation Instructions CLICK HERE
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IMSDOF9962
The product you are viewing cross references to these numbers
Before ordering, it is necessary to identify which bearing size you need. There are two types of bearings (Single row and Double row) used in these engines. This kit comes with DOUBLE row bearing.
Fits:
Porsche 986 Boxster 1997 -2004
Porsche 996 Carrera 1997 -2004
Kit Includes:
Patented DOF Flange with anti-rust zinc plating
IMS Bearing
3 micro-encapsulated Porsche bolts
Spacer for bearing
Engine oil port adapter with crush ring
Cam Plug
3,000psi hydraulic hose
Fitting for hose
Thread locker
Installation instructions
The direct oil feed (DOF) solution uses a patent pending custom made Intermediate Shaft Flange that utilizes a direct oil feed to the original Intermediate Shaft Bearing. It uses an adapted pressure fed oil line from a positive oil pressure feed on the cylinder head directly to an opening in the custom Intermediate Shaft Flange. This feeds fresh oil directly to the open end of the IMS bearing (after removing the seal to expose the ball bearings on the IMS bearing). By using a positive oil feed from the engine's cylinder head valve cover, there will always be a consistent flow of oil directed to the open end of the intermediate shaft bearing.
This is a cost effective way to help protect against a possible IMS bearing failure, using the original bearing. The system, however can also be used when replacing the bearing with a new SKF steel ball bearing for added insurance with a new, zero mile bearing.
For Installation Instructions CLICK HERE
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IMSDOF9962
106-08.2
99610590100
99610590101
99610590102
99610590103
99610590104
99610590105
99610590106
99610590107
99610502406
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
£840.00
Now £798.00
In stock
IMS Large Bearing Direct Oil Feed (DOF) Intermediate Shaft Retrofit Kit for Boxster 987 / 987C
Code: IMSDOF9872
IMS KIT WITH LARGE NON EXTRACTABLE STEEL BEARING
This bearing is 62mm outer diameter and 17mm wide. It is not extractable externally and engine needs to be stripped down in order to change it.
M97 Larger Bearing IMS Direct Oil Feed (DOF) Kit
Fits:
Porsche Boxster 987 2.7L 2005 -08/08
Porsche Boxster 987 3.2/3.4L 2005-08/08
Porsche Cayman 2.7L 987C 2006>>
Porsche Cayman S 3.4L 987C 2005>>
Kit Includes:
Patented DOF Flange with anti-rust zinc plating
3 micro-encapsulated Porsche bolts
Spacer for double-row bearing
Engine oil port adapter with crush ring
Cam Plug
3,000psi hydraulic hose
Fitting for hose
Thread locker
Installation instructions
The direct oil feed (DOF) solution uses a patent pending custom made Intermediate Shaft Flange that utilizes a direct oil feed to the original Intermediate Shaft Bearing. It uses an adapted pressure fed oil line from a positive oil pressure feed on the cylinder head directly to an opening in the custom Intermediate Shaft Flange. This feeds fresh oil directly to the open end of the IMS bearing (after removing the seal to expose the ball bearings on the IMS bearing). By using a positive oil feed from the engine's cylinder head valve cover, there will always be a consistent flow of oil directed to the open end of the intermediate shaft bearing.
This is a cost effective way to help protect against a possible IMS bearing failure, using the original bearing. The system, however can also be used when replacing the bearing with a new SKF steel ball bearing for added insurance with a new, zero mile bearing.
This bearing is 62mm outer diameter and 17mm wide. It is not extractable externally and engine needs to be stripped down in order to change it.
M97 Larger Bearing IMS Direct Oil Feed (DOF) Kit
Fits:
Porsche Boxster 987 2.7L 2005 -08/08
Porsche Boxster 987 3.2/3.4L 2005-08/08
Porsche Cayman 2.7L 987C 2006>>
Porsche Cayman S 3.4L 987C 2005>>
Kit Includes:
Patented DOF Flange with anti-rust zinc plating
3 micro-encapsulated Porsche bolts
Spacer for double-row bearing
Engine oil port adapter with crush ring
Cam Plug
3,000psi hydraulic hose
Fitting for hose
Thread locker
Installation instructions
The direct oil feed (DOF) solution uses a patent pending custom made Intermediate Shaft Flange that utilizes a direct oil feed to the original Intermediate Shaft Bearing. It uses an adapted pressure fed oil line from a positive oil pressure feed on the cylinder head directly to an opening in the custom Intermediate Shaft Flange. This feeds fresh oil directly to the open end of the IMS bearing (after removing the seal to expose the ball bearings on the IMS bearing). By using a positive oil feed from the engine's cylinder head valve cover, there will always be a consistent flow of oil directed to the open end of the intermediate shaft bearing.
This is a cost effective way to help protect against a possible IMS bearing failure, using the original bearing. The system, however can also be used when replacing the bearing with a new SKF steel ball bearing for added insurance with a new, zero mile bearing.
Product Vehicle Group
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
£880.00
Now £836.00
In stock
IMS Single Row Bearing Direct Oil Feed (DOF) Intermediate Shaft Retrofit Kit for Boxster 986 / 996
Code: IMSDOF9961
IMS KIT SINGLE ROW STEEL BEARING
Before ordering, it is necessary to identify which bearing size you need. There are two types of bearings (Single row and Double row) used in these engines. This kit comes with SINGLE row bearing.
Fits:
Porsche 986 Boxster 1997 -2004
Porsche 996 Carrera 1997 -2004
Kit Includes:
Patented DOF Flange with anti-rust zinc plating
IMS Bearing
3 micro-encapsulated Porsche bolts
Spacer for bearing
Engine oil port adapter with crush ring
Cam Plug
3,000psi hydraulic hose
Fitting for hose
Thread locker
Installation instructions
The direct oil feed (DOF) solution uses a patent pending custom made Intermediate Shaft Flange that utilizes a direct oil feed to the original Intermediate Shaft Bearing. It uses an adapted pressure fed oil line from a positive oil pressure feed on the cylinder head directly to an opening in the custom Intermediate Shaft Flange. This feeds fresh oil directly to the open end of the IMS bearing (after removing the seal to expose the ball bearings on the IMS bearing). By using a positive oil feed from the engine's cylinder head valve cover, there will always be a consistent flow of oil directed to the open end of the intermediate shaft bearing.
This is a cost effective way to help protect against a possible IMS bearing failure, using the original bearing. The system, however can also be used when replacing the bearing with a new SKF steel ball bearing for added insurance with a new, zero mile bearing.
For Installation Instructions CLICK HERE
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IMSDOF9961
The product you are viewing cross references to these numbers
Before ordering, it is necessary to identify which bearing size you need. There are two types of bearings (Single row and Double row) used in these engines. This kit comes with SINGLE row bearing.
Fits:
Porsche 986 Boxster 1997 -2004
Porsche 996 Carrera 1997 -2004
Kit Includes:
Patented DOF Flange with anti-rust zinc plating
IMS Bearing
3 micro-encapsulated Porsche bolts
Spacer for bearing
Engine oil port adapter with crush ring
Cam Plug
3,000psi hydraulic hose
Fitting for hose
Thread locker
Installation instructions
The direct oil feed (DOF) solution uses a patent pending custom made Intermediate Shaft Flange that utilizes a direct oil feed to the original Intermediate Shaft Bearing. It uses an adapted pressure fed oil line from a positive oil pressure feed on the cylinder head directly to an opening in the custom Intermediate Shaft Flange. This feeds fresh oil directly to the open end of the IMS bearing (after removing the seal to expose the ball bearings on the IMS bearing). By using a positive oil feed from the engine's cylinder head valve cover, there will always be a consistent flow of oil directed to the open end of the intermediate shaft bearing.
This is a cost effective way to help protect against a possible IMS bearing failure, using the original bearing. The system, however can also be used when replacing the bearing with a new SKF steel ball bearing for added insurance with a new, zero mile bearing.
For Installation Instructions CLICK HERE
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IMSDOF9961
106-08.2
99610590100
99610590101
99610590102
99610590103
99610590104
99610590105
99610590106
99610590107
99610502406
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
£810.00
Now £769.50
Arriving soon
Intake Plenum + 74mm Throttle Body + Induction Kit Porsche 987 Cayman/Boxster S 3.2L IPD
Code: IPDKIT98735
Intake Plenum + 74mm Throttle Body + Induction Kit Porsche 987 Cayman/Boxster S 3.2L IPD
Fits:
Porsche 987 GEN1 Cayman S 3.2L
Porsche 987 GEN1 Boxster S 3.2L
987 Competition Cayman 3.2L Plenum: HP Gains 20+ / Torque Gains 18 Requires upgrading factory 68mm Throttle Body with 74mm Throttle Body
Recommended to be installed on modified Caymans with Hi-Flow Cat back exhaust
The perfectly balanced mid engine Cayman/Boxster is Germany's canyon carving track meister. Unfortunately, the Cayman/Boxster was delivered slightly under powered from the factory so as not to threaten the Carrera's thrown. The Cayman IPD intake plenum delivers increased performance that puts the Cayman/Boxster in the ring with the Carrera.
The IPD Plenum out performs every other intake system on the market. Don't be fooled by other competitors claiming to offer Plenums. All factory Porsche air distributors are of the "T" variety and therefore suffer from less than ideal air flow and intake air speed.
The genius and power behind the IPD plenums comes from the patented "Y" style design and optimized diversion areas to deliver real and impressive power that will transform your Cayman's/Boxster's performance and heighten your Porsche driving experience.
The Cayman/Boxster IPD Intake Plenums are available in 3 versions, each one specifically designed to meet the performance requirements of varying Cayman/Boxster enthusiasts. IPD offers the ultimate Cayman/Boxster performance upgrades, all the way from mild to wild.
The IPD Cayman/Boxster "Competition" Plenum was designed to meet the needs of the most demanding Cayman/Boxster S enthusiasts. The "Competition" Plenums is even larger and utilizes the 74mm throttle body allowing it to deliver even greater air flow and substantial increases in performance.
The "Competition" version is designed to work with both bone stock Caymans/Boxsters but produces even more horsepower gains (20+) with Caymans/Boxsters already equipped with after market "cat back" high flow performance exhaust and other performance mods.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IPDKIT98735
The product you are viewing cross references to these numbers
Fits:
Porsche 987 GEN1 Cayman S 3.2L
Porsche 987 GEN1 Boxster S 3.2L
987 Competition Cayman 3.2L Plenum: HP Gains 20+ / Torque Gains 18 Requires upgrading factory 68mm Throttle Body with 74mm Throttle Body
Recommended to be installed on modified Caymans with Hi-Flow Cat back exhaust
The perfectly balanced mid engine Cayman/Boxster is Germany's canyon carving track meister. Unfortunately, the Cayman/Boxster was delivered slightly under powered from the factory so as not to threaten the Carrera's thrown. The Cayman IPD intake plenum delivers increased performance that puts the Cayman/Boxster in the ring with the Carrera.
The IPD Plenum out performs every other intake system on the market. Don't be fooled by other competitors claiming to offer Plenums. All factory Porsche air distributors are of the "T" variety and therefore suffer from less than ideal air flow and intake air speed.
The genius and power behind the IPD plenums comes from the patented "Y" style design and optimized diversion areas to deliver real and impressive power that will transform your Cayman's/Boxster's performance and heighten your Porsche driving experience.
The Cayman/Boxster IPD Intake Plenums are available in 3 versions, each one specifically designed to meet the performance requirements of varying Cayman/Boxster enthusiasts. IPD offers the ultimate Cayman/Boxster performance upgrades, all the way from mild to wild.
The IPD Cayman/Boxster "Competition" Plenum was designed to meet the needs of the most demanding Cayman/Boxster S enthusiasts. The "Competition" Plenums is even larger and utilizes the 74mm throttle body allowing it to deliver even greater air flow and substantial increases in performance.
The "Competition" version is designed to work with both bone stock Caymans/Boxsters but produces even more horsepower gains (20+) with Caymans/Boxsters already equipped with after market "cat back" high flow performance exhaust and other performance mods.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IPDKIT98735
87182
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche Cayman S 3.4L 987C 2005-08
£1,013.00
Now £962.35
In stock
Intake Plenum + 82mm Throttle Body + Induction Kit Porsche 987 Cayman/Boxster S 3.4L IPD
Code: IPDKIT98733
Intake Plenum + 82mm Throttle Body + Induction Kit Porsche 987 Cayman/Boxster S 3.4L IPD
Fits:
Porsche 987 GEN1 Cayman S 3.4L
Porsche 987 GEN1 Boxster S 3.4L
987 Competition Cayman 3.4L Plenum: HP Gains 20+ / Torque Gains 18 Requires upgrading factory 74mm Throttle Body with 997 GT3 82mm Throttle Body
Recommended to be installed on modified Caymans with Hi-Flow Cat back exhaust
The perfectly balanced mid engine Cayman/Boxster is Germany's canyon carving track meister. Unfortunately, the Cayman/Boxster was delivered slightly under powered from the factory so as not to threaten the Carrera's thrown. The Cayman IPD intake plenum delivers increased performance that puts the Cayman/Boxster in the ring with the Carrera.
The IPD Plenum out performs every other intake system on the market. Don't be fooled by other competitors claiming to offer Plenums. All factory Porsche air distributors are of the "T" variety and therefore suffer from less than ideal air flow and intake air speed.
The genius and power behind the IPD plenums comes from the patented "Y" style design and optimized diversion areas to deliver real and impressive power that will transform your Cayman's/Boxster's performance and heighten your Porsche driving experience.
The Cayman/Boxster IPD Intake Plenums are available in 3 versions, each one specifically designed to meet the performance requirements of varying Cayman/Boxster enthusiasts. IPD offers the ultimate Cayman/Boxster performance upgrades, all the way from mild to wild.
The IPD Cayman/Boxster "Competition" Plenum was designed to meet the needs of the most demanding Cayman/Boxster S enthusiasts. The "Competition" Plenums is even larger and utilizes the 997 GT3 82mm throttle body allowing it to deliver even greater air flow and substantial increases in performance.
The "Competition" version is designed to work with both bone stock Caymans/Boxsters but produces even more horsepower gains (20+) with Caymans/Boxsters already equipped with after market "cat back" high flow performance exhaust and other performance mods.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IPDKIT98733
The product you are viewing cross references to these numbers
Fits:
Porsche 987 GEN1 Cayman S 3.4L
Porsche 987 GEN1 Boxster S 3.4L
987 Competition Cayman 3.4L Plenum: HP Gains 20+ / Torque Gains 18 Requires upgrading factory 74mm Throttle Body with 997 GT3 82mm Throttle Body
Recommended to be installed on modified Caymans with Hi-Flow Cat back exhaust
The perfectly balanced mid engine Cayman/Boxster is Germany's canyon carving track meister. Unfortunately, the Cayman/Boxster was delivered slightly under powered from the factory so as not to threaten the Carrera's thrown. The Cayman IPD intake plenum delivers increased performance that puts the Cayman/Boxster in the ring with the Carrera.
The IPD Plenum out performs every other intake system on the market. Don't be fooled by other competitors claiming to offer Plenums. All factory Porsche air distributors are of the "T" variety and therefore suffer from less than ideal air flow and intake air speed.
The genius and power behind the IPD plenums comes from the patented "Y" style design and optimized diversion areas to deliver real and impressive power that will transform your Cayman's/Boxster's performance and heighten your Porsche driving experience.
The Cayman/Boxster IPD Intake Plenums are available in 3 versions, each one specifically designed to meet the performance requirements of varying Cayman/Boxster enthusiasts. IPD offers the ultimate Cayman/Boxster performance upgrades, all the way from mild to wild.
The IPD Cayman/Boxster "Competition" Plenum was designed to meet the needs of the most demanding Cayman/Boxster S enthusiasts. The "Competition" Plenums is even larger and utilizes the 997 GT3 82mm throttle body allowing it to deliver even greater air flow and substantial increases in performance.
The "Competition" version is designed to work with both bone stock Caymans/Boxsters but produces even more horsepower gains (20+) with Caymans/Boxsters already equipped with after market "cat back" high flow performance exhaust and other performance mods.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IPDKIT98733
87182
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche Cayman S 3.4L 987C 2005-08
£1,050.00
Now £997.50
In stock
.JPG?width=197&height=148 "Intake Plenum Competition + 74mm Throttle Body Porsche 986 Boxster IPD - 86174, 86174-3.2")
Intake Plenum Competition + 74mm Throttle Body Porsche 986 Boxster IPD
Code: IPDKIT98632
Aluminum Intake Plenum Competition + 74mm Throttle Body Porsche 986 Boxster IPD
The 986 Boxster marked Porsche's return to a purpose built 2 seat roadster since the famed 550 Spyder. This liberating open cockpit platform was instrumental in saving Porsche from financial uncertainty and was Porsche highest volume seller from 1997 to 2003, until the Cayenne entered the Porsche line up.
The perfectly balanced mid engine 986 Boxster was designed to deliver driving excitement on sinuous back country roads while enabling the driver (and passenger) to literally take in the sights, sun and smells of the surrounding environment and listening to the intoxicating mechanical sounds of a flat 6 Boxer engine tones.
The Boxster experience can only be further heightened by adding improved performance. The IPD Plenums provide impressive the power gains throughout the entire power band making for an even more visceral Porsche driving experience.
All 986 Boxster IPD Plenum applications are designed to utilize the larger 74mm Porsche throttle body. The combination of the patented "Y" design of the IPD Plenum combined with a larger TB allow for improved air flow and intake air speed. The IPD Plenum is the absolute single best performance mod you can install on a Porsche Boxster.
IPD offers 2 different 986 Boxster plenum versions, each specifically suited to work with different model years and engine displacements.
Installation of the 986 Boxster IPD Plenums comes with additional hardware and is relatively straight forward although IPD strongly recommend installation be performed by a trained Porsche technician.
The 3.2 liter 986 Boxster S Plenum provides impressive power gains throughout the entire power band, especially in the midrange where we enjoy it most.
The 74mm Boxster S IPD Plenum and upgraded 74mm (from 68mm) throttle body package is recommended for Boxster S enthusiasts looking for considerable performance gains. Performance gains can be felt throughout the entire power band making the Boxster driving experience even more visceral.
The IPD Boxster S Plenum will provides the most impressive power gains of any engine upgrade available and will truly transform your Boxster driving experience. The 74mm IPD Plenum is the best Boxster S modification on the market and will further compliment other mods such as exhaust, software and beyond.
Fits:
Porsche 986 Boxster S 3.2L 2000-04
Porsche 986 Boxster 2.7L 2000-04
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IPDKIT98632
The product you are viewing cross references to these numbers
The 986 Boxster marked Porsche's return to a purpose built 2 seat roadster since the famed 550 Spyder. This liberating open cockpit platform was instrumental in saving Porsche from financial uncertainty and was Porsche highest volume seller from 1997 to 2003, until the Cayenne entered the Porsche line up.
The perfectly balanced mid engine 986 Boxster was designed to deliver driving excitement on sinuous back country roads while enabling the driver (and passenger) to literally take in the sights, sun and smells of the surrounding environment and listening to the intoxicating mechanical sounds of a flat 6 Boxer engine tones.
The Boxster experience can only be further heightened by adding improved performance. The IPD Plenums provide impressive the power gains throughout the entire power band making for an even more visceral Porsche driving experience.
All 986 Boxster IPD Plenum applications are designed to utilize the larger 74mm Porsche throttle body. The combination of the patented "Y" design of the IPD Plenum combined with a larger TB allow for improved air flow and intake air speed. The IPD Plenum is the absolute single best performance mod you can install on a Porsche Boxster.
IPD offers 2 different 986 Boxster plenum versions, each specifically suited to work with different model years and engine displacements.
Installation of the 986 Boxster IPD Plenums comes with additional hardware and is relatively straight forward although IPD strongly recommend installation be performed by a trained Porsche technician.
The 3.2 liter 986 Boxster S Plenum provides impressive power gains throughout the entire power band, especially in the midrange where we enjoy it most.
The 74mm Boxster S IPD Plenum and upgraded 74mm (from 68mm) throttle body package is recommended for Boxster S enthusiasts looking for considerable performance gains. Performance gains can be felt throughout the entire power band making the Boxster driving experience even more visceral.
The IPD Boxster S Plenum will provides the most impressive power gains of any engine upgrade available and will truly transform your Boxster driving experience. The 74mm IPD Plenum is the best Boxster S modification on the market and will further compliment other mods such as exhaust, software and beyond.
Fits:
Porsche 986 Boxster S 3.2L 2000-04
Porsche 986 Boxster 2.7L 2000-04
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IPDKIT98632
86174
86174-3.2
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
£762.00
Now £723.90
In stock
Intake Plenum Competition + 82mm Throttle Body Porsche 987 Cayman/Boxster S 3.4L IPD
Code: IPDKIT98732
Aluminum Intake Plenum Competition + 82mm Throttle Body Porsche 987 Cayman/Boxster S 3.4L IPD
Fits:
Porsche 987 GEN1 Cayman S 3.4L
Porsche 987 GEN1 Boxster S 3.4L
987 Competition Cayman 3.4L Plenum: HP Gains 20+ / Torque Gains 18 Requires upgrading factory 74mm Throttle Body with 997 GT3 82mm Throttle Body
Recommended to be installed on modified Caymans with Hi-Flow Cat back exhaust
The perfectly balanced mid engine Cayman/Boxster is Germany's canyon carving track meister. Unfortunately, the Cayman/Boxster was delivered slightly under powered from the factory so as not to threaten the Carrera's thrown. The Cayman IPD intake plenum delivers increased performance that puts the Cayman/Boxster in the ring with the Carrera.
The IPD Plenum out performs every other intake system on the market. Don't be fooled by other competitors claiming to offer Plenums. All factory Porsche air distributors are of the "T" variety and therefore suffer from less than ideal air flow and intake air speed.
The genius and power behind the IPD plenums comes from the patented "Y" style design and optimized diversion areas to deliver real and impressive power that will transform your Cayman's/Boxster's performance and heighten your Porsche driving experience.
The Cayman/Boxster IPD Intake Plenums are available in 3 versions, each one specifically designed to meet the performance requirements of varying Cayman/Boxster enthusiasts. IPD offers the ultimate Cayman/Boxster performance upgrades, all the way from mild to wild.
The IPD Cayman/Boxster "Competition" Plenum was designed to meet the needs of the most demanding Cayman/Boxster S enthusiasts. The "Competition" Plenums is even larger and utilizes the 997 GT3 82mm throttle body allowing it to deliver even greater air flow and substantial increases in performance.
The "Competition" version is designed to work with both bone stock Caymans/Boxsters but produces even more horsepower gains (20+) with Caymans/Boxsters already equipped with after market "cat back" high flow performance exhaust and other performance mods.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IPDKIT98732
The product you are viewing cross references to these numbers
Fits:
Porsche 987 GEN1 Cayman S 3.4L
Porsche 987 GEN1 Boxster S 3.4L
987 Competition Cayman 3.4L Plenum: HP Gains 20+ / Torque Gains 18 Requires upgrading factory 74mm Throttle Body with 997 GT3 82mm Throttle Body
Recommended to be installed on modified Caymans with Hi-Flow Cat back exhaust
The perfectly balanced mid engine Cayman/Boxster is Germany's canyon carving track meister. Unfortunately, the Cayman/Boxster was delivered slightly under powered from the factory so as not to threaten the Carrera's thrown. The Cayman IPD intake plenum delivers increased performance that puts the Cayman/Boxster in the ring with the Carrera.
The IPD Plenum out performs every other intake system on the market. Don't be fooled by other competitors claiming to offer Plenums. All factory Porsche air distributors are of the "T" variety and therefore suffer from less than ideal air flow and intake air speed.
The genius and power behind the IPD plenums comes from the patented "Y" style design and optimized diversion areas to deliver real and impressive power that will transform your Cayman's/Boxster's performance and heighten your Porsche driving experience.
The Cayman/Boxster IPD Intake Plenums are available in 3 versions, each one specifically designed to meet the performance requirements of varying Cayman/Boxster enthusiasts. IPD offers the ultimate Cayman/Boxster performance upgrades, all the way from mild to wild.
The IPD Cayman/Boxster "Competition" Plenum was designed to meet the needs of the most demanding Cayman/Boxster S enthusiasts. The "Competition" Plenums is even larger and utilizes the 997 GT3 82mm throttle body allowing it to deliver even greater air flow and substantial increases in performance.
The "Competition" version is designed to work with both bone stock Caymans/Boxsters but produces even more horsepower gains (20+) with Caymans/Boxsters already equipped with after market "cat back" high flow performance exhaust and other performance mods.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IPDKIT98732
87182
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche Cayman S 3.4L 987C 2005-08
£845.00
Now £802.75
In stock
Intake Plenum Competition + Throttle Body Porsche 987 Cayman/Boxster S 3.4L DFI IPD
Code: IPDKIT98734
Aluminum Intake Plenum Competition + Throttle Body Kit. Porsche 987 Cayman/Boxster S 3.4L DFI IPD
The IPD 987.2 Boxster "Competition" Plenum was designed to meet the needs of the most demanding Boxster S enthusiasts. The "Competition" Plenums is internally larger and specifically designed to utilized the larger 82mm 997 GT3 throttle body. This new 987.2 Competition Plenum follows in the foot steps of the very successful 987.1 Competition Plenum, which has proven itself to be the absolute single best performance mod that can be installed on any 987.1. The combination of the patented IPD "Y" designed Plenum and Porsche's largest TB yield great performance gains that can be seen and felt throughout the entire power band.
The "Competition" version was designed and developed to work with Boxster S's equipped with high quality high-flow aftermarket cat-back exhausts. The addition of headers and high-flow cats will only further compliment the dramatic increases with intake air flow delivered by the IPD Plenum.
Performance gains take place throughout both horsepower and torque curves but are most realized through the mid-range and well into peak power range. This system develops up to 20+ HP on Boxster already equipped with aftermarket cat-back exhausts. Once installed, the 987.2 Boxster Competition Plenum will truly transform your Porsche Boxster driving experience.
Fits:
Porsche 987 GEN2 Cayman S 3.4L DFI
Porsche 987 GEN2 Boxster S 3.4L DFI
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IPDKIT98734
The product you are viewing cross references to these numbers
The IPD 987.2 Boxster "Competition" Plenum was designed to meet the needs of the most demanding Boxster S enthusiasts. The "Competition" Plenums is internally larger and specifically designed to utilized the larger 82mm 997 GT3 throttle body. This new 987.2 Competition Plenum follows in the foot steps of the very successful 987.1 Competition Plenum, which has proven itself to be the absolute single best performance mod that can be installed on any 987.1. The combination of the patented IPD "Y" designed Plenum and Porsche's largest TB yield great performance gains that can be seen and felt throughout the entire power band.
The "Competition" version was designed and developed to work with Boxster S's equipped with high quality high-flow aftermarket cat-back exhausts. The addition of headers and high-flow cats will only further compliment the dramatic increases with intake air flow delivered by the IPD Plenum.
Performance gains take place throughout both horsepower and torque curves but are most realized through the mid-range and well into peak power range. This system develops up to 20+ HP on Boxster already equipped with aftermarket cat-back exhausts. Once installed, the 987.2 Boxster Competition Plenum will truly transform your Porsche Boxster driving experience.
Fits:
Porsche 987 GEN2 Cayman S 3.4L DFI
Porsche 987 GEN2 Boxster S 3.4L DFI
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IPDKIT98734
87482
99760611601
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
£1,012.00
Now £961.40
Arriving soon
Spin off oil filter adapter with K&N oil filter for MY97-08 engines
Code: OILFILTERKIT1
Spin off oil filter adapter with K&N oil filter for MY97-08 engines
This filter adapter replaces the paper type filter Porsche # 99610702053 / 54 / 55 99610722553 and 99610722560
We recommend this set up of oil filter when an IMS bearing upgrade is done as this will limit damage from foreign object debris that would otherwise re-contaminate the engine when using the factory filter arrangement from wear particles or debris. It helps improve the longevity of your engine by providing full flow filtration by deleting the bypass, which means 100% of the oil gets filtered and whatever goes to the filter stays in the filter
Fits:
Porsche engines between years 1997-2008
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
OILFILTERKIT1
The product you are viewing cross references to these numbers
This filter adapter replaces the paper type filter Porsche # 99610702053 / 54 / 55 99610722553 and 99610722560
We recommend this set up of oil filter when an IMS bearing upgrade is done as this will limit damage from foreign object debris that would otherwise re-contaminate the engine when using the factory filter arrangement from wear particles or debris. It helps improve the longevity of your engine by providing full flow filtration by deleting the bypass, which means 100% of the oil gets filtered and whatever goes to the filter stays in the filter
Fits:
Porsche engines between years 1997-2008
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
OILFILTERKIT1
3609402061
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayenne 3.2L V6 2003>>
- Porsche Cayenne S 4.5L V8 2003>>
- Porsche Cayenne Turbo 4.5L 2003>>
- Porsche Cayenne Turbo S 4.5L 2006>>
£135.83
Now £129.04
In stock
Spin off oil filter adapter with Mahle oil filter for MY97-08 engines
Code: OILFILTERKIT2
Spin off oil filter adapter with Mahle oil filter for MY97-08 engines
This filter adapter replaces the paper type filter Porsche # 99610702053 / 54 / 55 99610722553 and 99610722560
We recommend this set up of oil filter when an IMS bearing upgrade is done as this will limit damage from foreign object debris that would otherwise re-contaminate the engine when using the factory filter arrangement from wear particles or debris. It helps improve the longevity of your engine by providing full flow filtration by deleting the bypass, which means 100% of the oil gets filtered and whatever goes to the filter stays in the filter
Fits:
Porsche engines between years 1997-2008
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
OILFILTERKIT2
The product you are viewing cross references to these numbers
This filter adapter replaces the paper type filter Porsche # 99610702053 / 54 / 55 99610722553 and 99610722560
We recommend this set up of oil filter when an IMS bearing upgrade is done as this will limit damage from foreign object debris that would otherwise re-contaminate the engine when using the factory filter arrangement from wear particles or debris. It helps improve the longevity of your engine by providing full flow filtration by deleting the bypass, which means 100% of the oil gets filtered and whatever goes to the filter stays in the filter
Fits:
Porsche engines between years 1997-2008
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
OILFILTERKIT2
99610702053
99610722553
99610722560
99610702054
99610702055
3609402062
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayenne 3.2L V6 2003>>
- Porsche Cayenne S 4.5L V8 2003>>
- Porsche Cayenne Turbo 4.5L 2003>>
- Porsche Cayenne Turbo S 4.5L 2006>>
£135.00
Now £128.25
In stock
Underdrive crankshaft pulley (with A/C) for Porsche 996 / 997 / 986 Boxster
Code: 3609001601-AC
Under drive crankshaft pulley (with A/C) kit. Includes pulley, drive belt and new bolt. Pulley is made from 6061-T6 aluminum, Improve horsepower and torque while reducing parasitic drag from the alternator, power steering pump and water pump.
Pulley outer diameter: 123mm (measured from ribs to ribs)
FITMENT GUIDE:
Porsche 986 Boxster:
1997-1999 2.5L H6
2000-2004 2.7L H6
2000-2004 S 3.2L H6
986 Spec Boxster Legal
Porsche 987 Boxster / Cayman
2005- 2.7L H6
2005-2006 3.2L H6
2007- 3.4L H6
Porsche 996 / 997
1999 3.4L H6 NA
2001-2004 3.6L H6 NA
2005- 3.6L H6 NA
Will not work on 3.8L (S) or Turbo models
For INSTALLATION GUIDE CLICK HERE
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3609001601-AC
The product you are viewing cross references to these numbers
Pulley outer diameter: 123mm (measured from ribs to ribs)
FITMENT GUIDE:
Porsche 986 Boxster:
1997-1999 2.5L H6
2000-2004 2.7L H6
2000-2004 S 3.2L H6
986 Spec Boxster Legal
Porsche 987 Boxster / Cayman
2005- 2.7L H6
2005-2006 3.2L H6
2007- 3.4L H6
Porsche 996 / 997
1999 3.4L H6 NA
2001-2004 3.6L H6 NA
2005- 3.6L H6 NA
Will not work on 3.8L (S) or Turbo models
For INSTALLATION GUIDE CLICK HERE
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3609001601-AC
99610211562
99610511563
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
£147.95
Now £140.55
In stock
Underdrive crankshaft pulley (without A/C) for Porsche 996 / 997 / 986 Boxster
Code: 3609001601-NO-AC
Under drive crankshaft pulley (without A/C) kit. Includes pulley, drive belt and new bolt. Pulley is made from 6061-T6 aluminum, Improve horsepower and torque while reducing parasitic drag from the alternator, power steering pump and water pump.
FITMENT GUIDE:
Porsche 986 Boxster:
1997-1999 2.5L H6
2000-2004 2.7L H6
2000-2004 S 3.2L H6
986 Spec Boxster Legal
Porsche 987 Boxster / Cayman
2005- 2.7L H6
2005-2006 3.2L H6
2007- 3.4L H6
Porsche 996 / 997
1999 3.4L H6 NA
2001-2004 3.6L H6 NA
2005- 3.6L H6 NA
Will not work on 3.8L (S) or Turbo models
For INSTALLATION GUIDE CLICK HERE
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3609001601-NO-AC
The product you are viewing cross references to these numbers
FITMENT GUIDE:
Porsche 986 Boxster:
1997-1999 2.5L H6
2000-2004 2.7L H6
2000-2004 S 3.2L H6
986 Spec Boxster Legal
Porsche 987 Boxster / Cayman
2005- 2.7L H6
2005-2006 3.2L H6
2007- 3.4L H6
Porsche 996 / 997
1999 3.4L H6 NA
2001-2004 3.6L H6 NA
2005- 3.6L H6 NA
Will not work on 3.8L (S) or Turbo models
For INSTALLATION GUIDE CLICK HERE
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3609001601-NO-AC
99610211562
99610511563
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
£146.95
Now £139.60
In stock
Additional rear main no. 8 bearing seal and housing. Porsche 986 Boxster / 996
Code: 996986REAREPS
Additional rear main no. 8 bearing seal and housing.
Fits:
Porsche 986/987 Boxster 1997-2009
Porsche 996/997 1997-2009
Our team of technicians has developed a Rear Main Seal that corrects the notorious rear main oil leaks on the m96 and m97 engines. It has been developed to solve the twisting of the last journal of the crank shaft, reducing engine vibration and extending engine life. Prevent engine failure, by replacing your factory rear main seal with our upgraded rear main bearing seal and housing.
Features:
• prevents crank warping
• decreases engine vibrations
• prevents piston rod #6 failure
• extends engine life
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
996986REAREPS
The product you are viewing cross references to these numbers
Fits:
Porsche 986/987 Boxster 1997-2009
Porsche 996/997 1997-2009
Our team of technicians has developed a Rear Main Seal that corrects the notorious rear main oil leaks on the m96 and m97 engines. It has been developed to solve the twisting of the last journal of the crank shaft, reducing engine vibration and extending engine life. Prevent engine failure, by replacing your factory rear main seal with our upgraded rear main bearing seal and housing.
Features:
• prevents crank warping
• decreases engine vibrations
• prevents piston rod #6 failure
• extends engine life
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
996986REAREPS
996986REAREPS
99911349040
99911349041
99710121200
99710121201
0PB105249
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
£595.00
Now £583.10
In stock
Aluminum Intake Plenum - Competition. Porsche 987 Cayman/Boxster S 3.4L DFI IPD
Code: 87482
The 987.2 Competition 82mm IPD Plenum requires the additional purchase of the 997 GT3 82mm Throttle Body
The IPD 987.2 Boxster "Competition" Plenum was designed to meet the needs of the most demanding Boxster S enthusiasts. The "Competition" Plenums is internally larger and specifically designed to utilized the larger 82mm 997 GT3 throttle body. This new 987.2 Competition Plenum follows in the foot steps of the very successful 987.1 Competition Plenum, which has proven itself to be the absolute single best performance mod that can be installed on any 987.1. The combination of the patented IPD "Y" designed Plenum and Porsche's largest TB yield great performance gains that can be seen and felt throughout the entire power band.
The "Competition" version was designed and developed to work with Boxster S's equipped with high quality high-flow aftermarket cat-back exhausts. The addition of headers and high-flow cats will only further compliment the dramatic increases with intake air flow delivered by the IPD Plenum.
Performance gains take place throughout both horsepower and torque curves but are most realized through the mid-range and well into peak power range. This system develops up to 20+ HP on Boxster already equipped with aftermarket cat-back exhausts. Once installed, the 987.2 Boxster Competition Plenum will truly transform your Porsche Boxster driving experience.
Fits:
Porsche 987 GEN2 Cayman S 3.4L DFI
Porsche 987 GEN2 Boxster S 3.4L DFI
This Plenum requires the additional purchase of the 99760511601 82mm Throttle Body
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
87482
The product you are viewing cross references to these numbers
The IPD 987.2 Boxster "Competition" Plenum was designed to meet the needs of the most demanding Boxster S enthusiasts. The "Competition" Plenums is internally larger and specifically designed to utilized the larger 82mm 997 GT3 throttle body. This new 987.2 Competition Plenum follows in the foot steps of the very successful 987.1 Competition Plenum, which has proven itself to be the absolute single best performance mod that can be installed on any 987.1. The combination of the patented IPD "Y" designed Plenum and Porsche's largest TB yield great performance gains that can be seen and felt throughout the entire power band.
The "Competition" version was designed and developed to work with Boxster S's equipped with high quality high-flow aftermarket cat-back exhausts. The addition of headers and high-flow cats will only further compliment the dramatic increases with intake air flow delivered by the IPD Plenum.
Performance gains take place throughout both horsepower and torque curves but are most realized through the mid-range and well into peak power range. This system develops up to 20+ HP on Boxster already equipped with aftermarket cat-back exhausts. Once installed, the 987.2 Boxster Competition Plenum will truly transform your Porsche Boxster driving experience.
Fits:
Porsche 987 GEN2 Cayman S 3.4L DFI
Porsche 987 GEN2 Boxster S 3.4L DFI
This Plenum requires the additional purchase of the 99760511601 82mm Throttle Body
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
87482
87482
9A111002022
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
£913.00
Now £894.74
Arriving soon
Aluminum Intake Plenum 74mm. Porsche 987 Boxster S 3.2L IPD
Code: 87174-3.2
Aluminum Intake Plenum 74mm
Fits:
Porsche 987 GEN1 Boxster S 3.2L 2005-06*
*Requires throttle body upgrade from 68mm to 74mm (part no 99760511501)
The IPD Plenum out performs every other intake system on the market. Don't be fooled by other competitors claiming to offer Plenums. All factory Porsche air distributors are of the "T" variety and therefore suffer from less than ideal air flow and reduced intake air speed.
The Boxster IPD Intake Plenums are available in 3 versions, each one specifically designed to meet the performance requirements of varying Boxster enthusiasts. From mild to wild, it all depends on how fast you want the wind in your hair.
The genius and power behind the IPD plenums comes from the patented "Y" style design and optimized diversion areas to deliver real and impressive power that will transform your Boxster performance and heighten your Porsche driving experience.
Porsche introduced the 987 S Boxster with the 3.2 liter engine from the 986 Boxster S. This Plenum version provides impressive power gains throughout the entire power band, especially in the midrange where we enjoy it most.
The 74mm Boxster S IPD Plenum and upgraded 74mm (from 68mm) throttle body package is recommended for Boxster S enthusiasts looking for considerable performance gains. Performance gains can be felt throughout the entire power band making the Boxster driving experience even more visceral.
The IPD Boxster S Plenum will provides the most impressive power gains of any engine upgrade available and will truly transform your Boxster driving experience. The 74mm IPD Plenum is the best Boxster S modification on the market and will further compliment other mods such as exhaust, software and beyond.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
87174-3.2
87174-3.2
98711005501
98711005502
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 987 3.2/3.4L 2005-08/08
£709.00
Now £694.82
In stock
Aluminum Intake Plenum 74mm. Porsche 987 Cayman/Boxster IPD
Code: 87174
Aluminum Intake Plenum 74mm
Some early models up to 2006 have a 68mm throttle body so you might need to buy a 74mm throttle body part code 99760511501
Fits:
Porsche 987 GEN1 Cayman S 3.4L
Porsche 987 GEN1 Boxster S 3.4L
Porsche 987 GEN1 Cayman 2.7L
Porsche 987 GEN1 Boxster 2.7L
The perfectly balanced mid engine Cayman/Boxster is Germany's canyon carving track meister. Unfortunately, the Cayman/Boxster was delivered slightly under powered from the factory so as not to threaten the Carrera's thrown. The Cayman/Boxster IPD intake plenum delivers increased performance that puts the Cayman/Boxster in the ring with the Carrera.
The IPD Plenum out performs every other intake system on the market. Don't be fooled by other competitors claiming to offer Plenums. All factory Porsche air distributors are of the "T" variety and therefore suffer from less than ideal air flow and intake air speed.
The genius and power behind the IPD plenums comes from the patented "Y" style design and optimized diversion areas to deliver real and impressive power that will transform your Cayman's/Boxster's performance and heighten your Porsche driving experience.
The Cayman/Boxster IPD Intake Plenums are available in 3 versions, each one specifically designed to meet the performance requirements of varying Cayman/Boxster enthusiasts. IPD offers the ultimate Cayman/Boxster performance upgrades, all the way from mild to wild.
The 74mm Cayman/Boxster S Plenum utilizes the factory 74mm throttle body. This version provides impressive power gains throughout the entire power band, especially in the midrange where it's most critical and most enjoyed.
The 74mm Cayman/Boxster S Plenum application is recommended for Cayman/Boxster S enthusiasts looking for considerable performance gains without pushing the performance envelope. Max horsepower is 14 and max torque is 12 which all comes in around 5600 RPM. Power gains are realized throughout the entire power band without any loses in power.
The IPD Cayman/Boxster S Plenum will provides the most impressive power gains of any engine upgrade available and will truly transform your Cayman/Boxster driving experience. The 74mm IPD Plenum is the best Cayman/Boxster modification on the market and will further compliment other mods such as exhaust, software and beyond.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
87174
The product you are viewing cross references to these numbers
Some early models up to 2006 have a 68mm throttle body so you might need to buy a 74mm throttle body part code 99760511501
Fits:
Porsche 987 GEN1 Cayman S 3.4L
Porsche 987 GEN1 Boxster S 3.4L
Porsche 987 GEN1 Cayman 2.7L
Porsche 987 GEN1 Boxster 2.7L
The perfectly balanced mid engine Cayman/Boxster is Germany's canyon carving track meister. Unfortunately, the Cayman/Boxster was delivered slightly under powered from the factory so as not to threaten the Carrera's thrown. The Cayman/Boxster IPD intake plenum delivers increased performance that puts the Cayman/Boxster in the ring with the Carrera.
The IPD Plenum out performs every other intake system on the market. Don't be fooled by other competitors claiming to offer Plenums. All factory Porsche air distributors are of the "T" variety and therefore suffer from less than ideal air flow and intake air speed.
The genius and power behind the IPD plenums comes from the patented "Y" style design and optimized diversion areas to deliver real and impressive power that will transform your Cayman's/Boxster's performance and heighten your Porsche driving experience.
The Cayman/Boxster IPD Intake Plenums are available in 3 versions, each one specifically designed to meet the performance requirements of varying Cayman/Boxster enthusiasts. IPD offers the ultimate Cayman/Boxster performance upgrades, all the way from mild to wild.
The 74mm Cayman/Boxster S Plenum utilizes the factory 74mm throttle body. This version provides impressive power gains throughout the entire power band, especially in the midrange where it's most critical and most enjoyed.
The 74mm Cayman/Boxster S Plenum application is recommended for Cayman/Boxster S enthusiasts looking for considerable performance gains without pushing the performance envelope. Max horsepower is 14 and max torque is 12 which all comes in around 5600 RPM. Power gains are realized throughout the entire power band without any loses in power.
The IPD Cayman/Boxster S Plenum will provides the most impressive power gains of any engine upgrade available and will truly transform your Cayman/Boxster driving experience. The 74mm IPD Plenum is the best Cayman/Boxster modification on the market and will further compliment other mods such as exhaust, software and beyond.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
87174
87174
87174-2.7
87174-2.7-05
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
Prices from: £694.82
Aluminum Intake Plenum Competition Range. Porsche 987 Cayman/Boxster S 3.4L IPD
Code: 87182
Fits:
Porsche 987 GEN1 Cayman S 3.4L
Porsche 987 GEN1 Boxster S 3.4L
987 Competition Cayman 3.4L Plenum: HP Gains 20+ / Torque Gains 18 Requires upgrading factory 74mm Throttle Body with 997 GT3 82mm Throttle Body
Recommended to be installed on modified Caymans with Hi-Flow Cat back exhaust
The perfectly balanced mid engine Cayman/Boxster is Germany's canyon carving track meister. Unfortunately, the Cayman/Boxster was delivered slightly under powered from the factory so as not to threaten the Carrera's thrown. The Cayman IPD intake plenum delivers increased performance that puts the Cayman/Boxster in the ring with the Carrera.
The IPD Plenum out performs every other intake system on the market. Don't be fooled by other competitors claiming to offer Plenums. All factory Porsche air distributors are of the "T" variety and therefore suffer from less than ideal air flow and intake air speed.
The genius and power behind the IPD plenums comes from the patented "Y" style design and optimized diversion areas to deliver real and impressive power that will transform your Cayman's/Boxster's performance and heighten your Porsche driving experience.
The Cayman/Boxster IPD Intake Plenums are available in 3 versions, each one specifically designed to meet the performance requirements of varying Cayman/Boxster enthusiasts. IPD offers the ultimate Cayman/Boxster performance upgrades, all the way from mild to wild.
The IPD Cayman/Boxster "Competition" Plenum was designed to meet the needs of the most demanding Cayman/Boxster S enthusiasts. The "Competition" Plenums is even larger and utilizes the 997 GT3 82mm throttle body allowing it to deliver even greater air flow and substantial increases in performance.
The "Competition" version is designed to work with both bone stock Caymans/Boxsters but produces even more horsepower gains (20+) with Caymans/Boxsters already equipped with after market "cat back" high flow performance exhaust and other performance mods.
Porsche 987 GEN1 Cayman S 3.4L
Porsche 987 GEN1 Boxster S 3.4L
987 Competition Cayman 3.4L Plenum: HP Gains 20+ / Torque Gains 18 Requires upgrading factory 74mm Throttle Body with 997 GT3 82mm Throttle Body
Recommended to be installed on modified Caymans with Hi-Flow Cat back exhaust
The perfectly balanced mid engine Cayman/Boxster is Germany's canyon carving track meister. Unfortunately, the Cayman/Boxster was delivered slightly under powered from the factory so as not to threaten the Carrera's thrown. The Cayman IPD intake plenum delivers increased performance that puts the Cayman/Boxster in the ring with the Carrera.
The IPD Plenum out performs every other intake system on the market. Don't be fooled by other competitors claiming to offer Plenums. All factory Porsche air distributors are of the "T" variety and therefore suffer from less than ideal air flow and intake air speed.
The genius and power behind the IPD plenums comes from the patented "Y" style design and optimized diversion areas to deliver real and impressive power that will transform your Cayman's/Boxster's performance and heighten your Porsche driving experience.
The Cayman/Boxster IPD Intake Plenums are available in 3 versions, each one specifically designed to meet the performance requirements of varying Cayman/Boxster enthusiasts. IPD offers the ultimate Cayman/Boxster performance upgrades, all the way from mild to wild.
The IPD Cayman/Boxster "Competition" Plenum was designed to meet the needs of the most demanding Cayman/Boxster S enthusiasts. The "Competition" Plenums is even larger and utilizes the 997 GT3 82mm throttle body allowing it to deliver even greater air flow and substantial increases in performance.
The "Competition" version is designed to work with both bone stock Caymans/Boxsters but produces even more horsepower gains (20+) with Caymans/Boxsters already equipped with after market "cat back" high flow performance exhaust and other performance mods.
Product Vehicle Group
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche Cayman S 3.4L 987C 2005-08
£746.00
Now £731.08
In stock
Aluminum Intake Plenum. Porsche 981 Boxster/Cayman DFI IPD
Code: 81482
IPD Aluminum Intake Plenum.
Fits:
Porsche 981 Cayman 3.4L / S / GTS / GT4 3.8L DFI
Porsche 981 Cayman DFI 2.7L
Porsche 981 Boxster/S/GTS/Spyder DFI 3.4L
Porsche 981 Boxster DFI 2.7L
After a very extensive R & D program we are proud to launch the new 981 IPD 82mm Competition Plenums. We only offer "Competition" versions of the 981 Plenums which upgrades the factory 74mm throttle body with the larger 997 GT3 82mm throttle body. This combination has proven to be considerably more popular and deliver even more performance. This Competition version will work with both 3.4L "S" and 2.7L "Non-S" applications.
The 981 intake is nearly identical to the 987.2 intake. Porsche made a few upgrades with the 981, most notably being that the 981 draws outside air from both driver and passenger air intakes instead of the driver's side only as previously found with all 986, 987 and 987.2 applications. IPD has included a custom silicone hose designed to perfectly fit the larger 82mm TB and considerably improve air flow.
The new 981 Plenums also benefits from the internal dimpling effect that we are now implementing on all future Plenums. This internal dimpling allows us to control the boundary layer and maximize air flow. Just like a dimpled golf ball travels farther than a smooth golf ball. Controlled turbulent air creates less friction and "tumbles" over a given area more efficiently.
Power gains with the 981 Competition Plenum are virtually the same as with the 987.2 Competition Plenum, putting down 20 horsepower and 16 foot pounds of torque at the wheels. The bulk of the power gains from the IPD Plenum begin around 4000 rpm, continues all the way through to redline and become fully realized in the 6000 rpm range. IPD performance gains stay above both factory power curves throughout the entire rev range
Requires 997 GT3 82mm throttle body
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
81482
The product you are viewing cross references to these numbers
Fits:
Porsche 981 Cayman 3.4L / S / GTS / GT4 3.8L DFI
Porsche 981 Cayman DFI 2.7L
Porsche 981 Boxster/S/GTS/Spyder DFI 3.4L
Porsche 981 Boxster DFI 2.7L
After a very extensive R & D program we are proud to launch the new 981 IPD 82mm Competition Plenums. We only offer "Competition" versions of the 981 Plenums which upgrades the factory 74mm throttle body with the larger 997 GT3 82mm throttle body. This combination has proven to be considerably more popular and deliver even more performance. This Competition version will work with both 3.4L "S" and 2.7L "Non-S" applications.
The 981 intake is nearly identical to the 987.2 intake. Porsche made a few upgrades with the 981, most notably being that the 981 draws outside air from both driver and passenger air intakes instead of the driver's side only as previously found with all 986, 987 and 987.2 applications. IPD has included a custom silicone hose designed to perfectly fit the larger 82mm TB and considerably improve air flow.
The new 981 Plenums also benefits from the internal dimpling effect that we are now implementing on all future Plenums. This internal dimpling allows us to control the boundary layer and maximize air flow. Just like a dimpled golf ball travels farther than a smooth golf ball. Controlled turbulent air creates less friction and "tumbles" over a given area more efficiently.
Power gains with the 981 Competition Plenum are virtually the same as with the 987.2 Competition Plenum, putting down 20 horsepower and 16 foot pounds of torque at the wheels. The bulk of the power gains from the IPD Plenum begin around 4000 rpm, continues all the way through to redline and become fully realized in the 6000 rpm range. IPD performance gains stay above both factory power curves throughout the entire rev range
Requires 997 GT3 82mm throttle body
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
81482
81482
9A111012025
9A111012026
9A111012030
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
Prices from: £857.50
Aluminum Intake Plenum. Porsche 987 Cayman/Boxster DFI IPD
Code: 87474
Porsche's new DFI (Direct Fuel Injection) intake is a totally and completely redesigned intake system developed to deliver improved performance, fuel consumption and emissions by optimizing the air fuel mixture directly inside the combustion chamber.
The DFI Porsche engine package is a finely tuned performance machine and additional power has proved difficult to find. The unique design of Porsche's new DFI intake system posed very challenging tuning hurdles but once again IPD developed a design that out performs the factory intake system without compromising reliability and drive-ability.
This innovative and revolutionary IPD DFI Intake Plenum employs the patented "Y" design as well as an enlarged plenum area that allows for improved intake air speed and air velocity resulting in performance increases without any power loses.
The all new specifically designed IPD 3.4L DFI Cayman/Boxster Plenum is a direct bolt-on upgrade that replaces the factory plenum and utilizes all pre-existing factory hardware including the OE factory throttle body.
The improved IPD intake design allows for smoother, less turbulent and more efficient air flow with higher velocity air intake speed creating impressive power and torque gains.
The superior design of the DFI IPD Plenum provides an additional 12-14 horsepower at the wheels. Unlike previous naturally aspirated IPD plenums that delivered stronger gains in the mid range, the new IPD DFI Plenums deliver a similar shaped power curve as the factory but are considerably stronger from the mid range to redline.
Power output in the lower rev range follows the Porsche factory output, with NO loses. Power and torque are realized in the midrange and continue to climb above factory power outputs all the way up to redline.
Installation of the new IPD 3.4L DFI Plenum is relatively straight forward and can be installed by mechanically inclined DIY customers although IPD strongly recommends installation be performed by a trained and qualified Porsche technician.
Fits:
Porsche 987 GEN2 Cayman S 3.4L DFI
Porsche 987 GEN2 Boxster S 3.4L DFI
Porsche 987 GEN2 Cayman 2.9L DFI
Porsche 987 GEN2 Boxster 2.9L DFI
The DFI Porsche engine package is a finely tuned performance machine and additional power has proved difficult to find. The unique design of Porsche's new DFI intake system posed very challenging tuning hurdles but once again IPD developed a design that out performs the factory intake system without compromising reliability and drive-ability.
This innovative and revolutionary IPD DFI Intake Plenum employs the patented "Y" design as well as an enlarged plenum area that allows for improved intake air speed and air velocity resulting in performance increases without any power loses.
The all new specifically designed IPD 3.4L DFI Cayman/Boxster Plenum is a direct bolt-on upgrade that replaces the factory plenum and utilizes all pre-existing factory hardware including the OE factory throttle body.
The improved IPD intake design allows for smoother, less turbulent and more efficient air flow with higher velocity air intake speed creating impressive power and torque gains.
The superior design of the DFI IPD Plenum provides an additional 12-14 horsepower at the wheels. Unlike previous naturally aspirated IPD plenums that delivered stronger gains in the mid range, the new IPD DFI Plenums deliver a similar shaped power curve as the factory but are considerably stronger from the mid range to redline.
Power output in the lower rev range follows the Porsche factory output, with NO loses. Power and torque are realized in the midrange and continue to climb above factory power outputs all the way up to redline.
Installation of the new IPD 3.4L DFI Plenum is relatively straight forward and can be installed by mechanically inclined DIY customers although IPD strongly recommends installation be performed by a trained and qualified Porsche technician.
Fits:
Porsche 987 GEN2 Cayman S 3.4L DFI
Porsche 987 GEN2 Boxster S 3.4L DFI
Porsche 987 GEN2 Cayman 2.9L DFI
Porsche 987 GEN2 Boxster 2.9L DFI
Product Vehicle Group
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
£913.00
Now £894.74
Arriving soon
Brey Krause Deep Sump Kit. Porsche 996 / 997 / 986 Boxster / 987 >>2008
Code: R-9095
Brey Krause Deep Sump Kit.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
R-9095
The product you are viewing cross references to these numbers
For Boxster 986, 987 and 996, 997 Non-Turbo Models through 2008
Scavenging and aeration in the oil pan have been identified as a problem in 996/997, Boxster, and Cayman models experiencing high G-forces on the racetrack. The R-9095 oil pan spacer provides a simple solution. This spacer increases sump capacity by half a quart, providing more reserve to ward off starvation. The R-9095 is approved by the Porsche Club of America for use in PCA club racing Stock and Prepared class cars. The R-9095 kit clears all factory options including the rear skid plate. Added oil capacities as well as increased oil pan surface area increase oil cooling and engine performance.
*Note: Oil pan and sump baffle are OEM parts and do not need to be purchased. Baffle spacer and pick-up tube spacer are included in this kit.
Material: 6061 T6 Aluminum Alloy
Finish: Clear Anodized
Weight: N/A
Models: Boxster, Boxster S, 996/997 models (excludes GT3 and turbocharged models) and Cayman through 2008.
Installation: For best results internal baffle passages should be modified. Modification instructions included in the kit.
Miscellaneous: Spacer adds .5 U.S. quarts to oil pan volume and improves internal baffling system. Extension bolts, baffle spacer and pick-up tube spacer included in the kit.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
R-9095
99610703158
99610703155
99610703157
9961070315
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
£274.90
Now £269.40
In stock
Deep sump track oil pan kit 2 Quart (1.89 Litre). Porsche 996 / 997 / Boxster 986 / Boxster 987 / Cayman 987C
Code: 996107032XX
2 Quart (1.89 Litre) Deep Sump Track Oil Pan Kit.
Models: Boxster, Cayman, 996 and 997 models (excludes GT3 and turbocharged models).
This kit is best used on track only vehicles as ground clearance will become an issue due to the extension.
Scavenging and aeration in the oil pan have been identified as a problem in the 996, 997 and Boxster models that experience high G-forces on the racetrack. Motorsports 2 Quart Deep Sump Oil Pan Kit for all 986/996/987/997 Porsche's (excluding GT3, GT2 Turbo and DFI models). This deep sump kit is an extension added to the original oil pan, increasing oil capacity by 2 quarts, helping with oil starvation problems these vehicles commonly have.
Kit Includes:
- 2Quart Pan Extension
- Oil pickup spacer
- Extended Hexagon Head Bolts (x15)
- Aluminium spacers for baffle (x3)
- Stainless oil trap
Please order extra
1 x 703141410 Reinzosil Universal Sealing Compound
2 x 99710701600 Oil tubes
Fits:
Porsche Boxster 986 / 987
Porsche 996
Porsche 997
Porsche Cayman
Please note: This kit will not fit 996 Turbo / 996 GT2 / 996 GT3 / 997 Turbo / 997 GT2 / 997 GT3
For Installation Instructions CLICK HERE
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
996107032XX
The product you are viewing cross references to these numbers
Models: Boxster, Cayman, 996 and 997 models (excludes GT3 and turbocharged models).
This kit is best used on track only vehicles as ground clearance will become an issue due to the extension.
Scavenging and aeration in the oil pan have been identified as a problem in the 996, 997 and Boxster models that experience high G-forces on the racetrack. Motorsports 2 Quart Deep Sump Oil Pan Kit for all 986/996/987/997 Porsche's (excluding GT3, GT2 Turbo and DFI models). This deep sump kit is an extension added to the original oil pan, increasing oil capacity by 2 quarts, helping with oil starvation problems these vehicles commonly have.
Kit Includes:
- 2Quart Pan Extension
- Oil pickup spacer
- Extended Hexagon Head Bolts (x15)
- Aluminium spacers for baffle (x3)
- Stainless oil trap
Please order extra
1 x 703141410 Reinzosil Universal Sealing Compound
2 x 99710701600 Oil tubes
Fits:
Porsche Boxster 986 / 987
Porsche 996
Porsche 997
Porsche Cayman
Please note: This kit will not fit 996 Turbo / 996 GT2 / 996 GT3 / 997 Turbo / 997 GT2 / 997 GT3
For Installation Instructions CLICK HERE
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
996107032XX
996107032XX
99610703158
99610703155
99610703157
9961070315
996107031XX
3609101000
99610703155
99610703157
99610703158
99610724341
99610724340
3609101000
106-00
106-00.1
106-00.2
106-00.3
106-00.4
106-00.5
106-00.6
106-00.7
106-00.8
106-00.9
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
£260.00
Now £254.80
In stock
Drive Belt for Under Drive Pully cars WITH Aircon Porsche 996/ Boxster 986/997
Code: 99610215199/1
Drive Belt for Motorsport Under Drive Pully cars WITH Aircon. Porsche 996/ Boxster 986/997
What size serpentine belt to run when using an under drive pulley?
The stock serpentine belt length for a 986 Porsche Boxster or Porsche 996 with air conditioning is 2115mm Porsche part # 996 102 151 64. If you remove the air conditioning but keep the stock drive pulley you will need a new serpentine belt that is 1930mm in length. If you then decide to add an underdrive pulley in the range of 4.25 to 5 inches in diameter you will need a belt 1905mm in length. For those of you who would like to add an under drive pulley with air conditioning, the proper length is 2101mm.
So in review:
Stock pulley w/ air conditioning - 2115mm
Under drive pulley w/ air conditioning - 2100mm
Fits:
Porsche 996 3.4L
Porsche 996 3.6L
Porsche 997 3.6L
Porsche Boxster 986
Porsche Boxster 987 MKI
Porsche Cayman 987C MKI
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99610215199
The product you are viewing cross references to these numbers
What size serpentine belt to run when using an under drive pulley?
The stock serpentine belt length for a 986 Porsche Boxster or Porsche 996 with air conditioning is 2115mm Porsche part # 996 102 151 64. If you remove the air conditioning but keep the stock drive pulley you will need a new serpentine belt that is 1930mm in length. If you then decide to add an underdrive pulley in the range of 4.25 to 5 inches in diameter you will need a belt 1905mm in length. For those of you who would like to add an under drive pulley with air conditioning, the proper length is 2101mm.
So in review:
Stock pulley w/ air conditioning - 2115mm
Under drive pulley w/ air conditioning - 2100mm
Fits:
Porsche 996 3.4L
Porsche 996 3.6L
Porsche 997 3.6L
Porsche Boxster 986
Porsche Boxster 987 MKI
Porsche Cayman 987C MKI
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99610215199
6PK2100
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
Price: £22.95
In stock
Drive Belt for Under Drive Pully cars WITHOUT Aircon Porsche 996/ Boxster 986
Code: 99610215198/1
Drive Belt for Motorsport Under Drive Pully cars WITHOUT Aircon Porsche 996/ Boxster 986
What size serpentine belt to run when using an under drive pulley?
The stock serpentine belt length for a 986 Porsche Boxster or Porsche 996 with air conditioning is 2115mm Porsche part # 996 102 151 64. If you remove the air conditioning but keep the stock drive pulley you will need a new serpentine belt that is 1930mm in length. If you then decide to add an underdrive pulley in the range of 4.25 to 5 inches in diameter you will need a belt 1905mm in length. For those of you who would like to add an under drive pulley with air conditioning, the proper length is 2101mm.
So in review:
Stock pulley w/o air conditioning - 1930mm
Under drive pulley w/o air conditioning - 1905mm
Fits:
Porsche 996 3.4L
Porsche 996 3.6L
Porsche Boxster 986
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99610215198
The product you are viewing cross references to these numbers
What size serpentine belt to run when using an under drive pulley?
The stock serpentine belt length for a 986 Porsche Boxster or Porsche 996 with air conditioning is 2115mm Porsche part # 996 102 151 64. If you remove the air conditioning but keep the stock drive pulley you will need a new serpentine belt that is 1930mm in length. If you then decide to add an underdrive pulley in the range of 4.25 to 5 inches in diameter you will need a belt 1905mm in length. For those of you who would like to add an under drive pulley with air conditioning, the proper length is 2101mm.
So in review:
Stock pulley w/o air conditioning - 1930mm
Under drive pulley w/o air conditioning - 1905mm
Fits:
Porsche 996 3.4L
Porsche 996 3.6L
Porsche Boxster 986
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99610215198
6PK1905
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
Price: £21.95
In stock
Engine mount with HD 95A shore rating bush Porsche 986 Boxster 1997-04 / 987 Boxster 2005 > / 987C Cayman 2006 >
Code: 3609309871
Engine mount with HD 95A shore rating bush
Fits:
Porsche 986 Boxster 1997-04
Porsche 987.1 Boxster 2005-08
Porsche 987C.1 Cayman 2006-08
This product replaces:
Diagram Ref No 2.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3609309871
The product you are viewing cross references to these numbers
Fits:
Porsche 986 Boxster 1997-04
Porsche 987.1 Boxster 2005-08
Porsche 987C.1 Cayman 2006-08
This product replaces:
98737502304, 98737502305, 98637502307
Click 'Zoom in' for large parts diagram.Diagram Ref No 2.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3609309871
98737502304
98737502305
98637502307
9863750230
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
£195.00
Now £191.10
In stock
Engine mount with HD polyurethane bush Porsche 986 Boxster 1997-04 / 987 Boxster 2005 > / 987C Cayman 2006 >
Code: 3609309872
Engine mount with HD polyurethane bush
Fits:
Porsche 986 Boxster 1997-04
Porsche 987.1 Boxster 2005-08
Porsche 987C.1 Cayman 2006-08
This product replaces:
Diagram Ref No 2.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3609309872
The product you are viewing cross references to these numbers
Fits:
Porsche 986 Boxster 1997-04
Porsche 987.1 Boxster 2005-08
Porsche 987C.1 Cayman 2006-08
This product replaces:
98737502304, 98737502305, 98637502307
Click 'Zoom in' for large parts diagram.Diagram Ref No 2.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3609309872
98737502304
98737502305
98637502307
9863750230
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
£195.00
Now £191.10
In stock
Harmonically damped underdrive pulley for Porsche 986, 996, 987, 997 models
Code: 3609001608
Harmonically damped underdrive pulley. Dampens/reduces internal engine harmonics for improved engine performance, efficiency and longevity.
replacement for OE 99710224101
Fits on all Porsche 986, 996, 987, 997 models EXCEPT 2.9L (multi hole crank pulley pattern), DFI engines, GT2, GT3 and Turbo.
Increase your engine output by reducing the draw of the engine's ancillaries ie the power steering pump, Air Conditioning, water pump and alternator by slowing them down and reducing the horsepower they use.
Underdrive pulley is one of the cheapest returns for the money spent when it comes to actual performance and horsepower gains for track and street use cars.
Installation tool (wrench) included, new OEM crankshaft pulley bolt is recommended but not included with this product.
Please add Drive Belt for Under Drive Pully cars WITH Aircon Porsche 996/ Boxster 986/997 99610215199/1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3609001608
The product you are viewing cross references to these numbers
replacement for OE 99710224101
Fits on all Porsche 986, 996, 987, 997 models EXCEPT 2.9L (multi hole crank pulley pattern), DFI engines, GT2, GT3 and Turbo.
Increase your engine output by reducing the draw of the engine's ancillaries ie the power steering pump, Air Conditioning, water pump and alternator by slowing them down and reducing the horsepower they use.
Underdrive pulley is one of the cheapest returns for the money spent when it comes to actual performance and horsepower gains for track and street use cars.
Installation tool (wrench) included, new OEM crankshaft pulley bolt is recommended but not included with this product.
Please add Drive Belt for Under Drive Pully cars WITH Aircon Porsche 996/ Boxster 986/997 99610215199/1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3609001608
99710224101
3609001608
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
£199.00
Now £195.02
In stock
HPDE 2 Quart Accusump Universal Kit. Porsche 987 Cayman / Boxster / 997
Code: 106-12.1
HPDE 2 Quart Accusump Universal Kit.
Fits:
Porsche 986 Boxster 1997-04
Porsche 996 Carrera 1998-04
Porsche 987 Boxster 2005-08
Porsche 987 Cayman 2005-08
Porsche 997 2005-08
The Accusump is designed collect pressurized oil from your engine and store it so it may be discharged later during low oil pressure surges to protect against engine damage during demanding racing conditions. After the oil pressure stabilizes, the piston inside the Accusump moves back and forth, pressurizing the Accusump until it equalizes with engine's oil pressure. The Electric Pressure Control Valve we use is for a discharge/refill of 35-40 PSI. These valves have the convenience of an electric valve for remote mounted units on daily drivers but with the rapid refill rate of a manual valve as required in racing. The E.P.C. valving will only allow the Accusump to discharge oil when the engine's oil pressure drops below a predetermined level and only refill when the pressure rises above that level.
The LN Engineering HPDE Accusump kit is easy to install, requiring plumbing of only a single oil line. Our universal Accusump kit has everything you need to carry out a custom Accusump installation in your Boxster, Cayman, or 911, sans wiring or electrical pieces and includes a two quart Marine Accusump system including LN Engineering's Spin-On Full-Flow Oil Filter Adapter, single input sandwich adapter (for easy one-line installation - fits between filter and LN spin on filter adapter), the LN Engineering Billet Washable High Performance Oil Filter, 45 psi electronic valve, hose, and fittings. In conjunction with the installation of an Accusump, we recommend adding an X51 oil baffle and 997 oil return tubes for improved oil control and ensure scavenge oil is returned to the sump as quickly as possible. For installation support and for troubleshooting technical issues with your Accusump, please contact Canton directly.
NO WARRANTY, RETURNS, OR EXCHANGES ON ACCUSUMP KITS!
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
106-12.1
106-12.1
106121
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
£2,020.00
Now £1,979.60
In stock
IMS Intermediate Shaft Bearing Upgrade Eternal Fix -58MM FLANGE - Open Engine
Code: 987997IMS58MM
IMS Intermediate Shaft Bearing Upgrade Eternal Fix -58MM FLANGE - OPEN ENGINES (while doing an engine rebuild)
Fits:
Porsche 997 2005-08
Porsche Boxster 987
Porsche Cayman 987
(Not for M96 Engines)
Porsche Ims Intermediate Shaft Bearing Upgrade - Eternal Fix with Oil Pressure Feed - 58 MM - Open Engine Permanently Fix Your Intermediate Shaft With The Eternal Fix! Unlike Failure Prone Ball Bearings, Eps Uses A Patented Cylindrical Bearing With Thrust Control.
Prevent future catastrophic engine failure permanently with the only true Eternal Fix for the notorious Porsche intermediate shaft bearing. Unlike the other failure-prone ball bearing products that the original IMS and other upgrades on the market use, EPS uses a patented cylindrical bearing with thrust control that can be pressed directly into the back of the engine without disassembly. The cylindrical bearings have over 12 times the load capacity of other ball bearing solutions making the EPS IMS bearing the clear choice. Backed by a full 5-year warranty and includes an oil feed modification kit. Order yours today!
WHAT MAKES OUR SOLUTION DIFFERENT?
Roller bearings are not intended for carrying large axial loads. Similar to failure-prone ball bearings, when cylindrical roller bearings are used for thrust control, the roller becomes compromised due to the limited surface contact area on the sides of the rollers. The results of using a cylindrical bearing for thrust control will be similar to all other ball bearing solutions.
In our patented system, we use a 15mm cylindrical bearing with thrust control that allows for the separation of the axial load from the radial load. Our roller bearings do NOT carry the axis load (thrust control) on the side, which leaves the roller free to carry only the radial load (main load). The axial load is carried exclusively on the entire permitter of the outer race. This results in a bearing that is not overloaded and will last the lifetime of the engine.
EPS recommends using this product in conjunction to the Rear Main #8 Seal and Housing
Fits:
Porsche 997 2005-08
Porsche Boxster 987
Porsche Cayman 987
(Not for M96 Engines)
Porsche Ims Intermediate Shaft Bearing Upgrade - Eternal Fix with Oil Pressure Feed - 58 MM - Open Engine Permanently Fix Your Intermediate Shaft With The Eternal Fix! Unlike Failure Prone Ball Bearings, Eps Uses A Patented Cylindrical Bearing With Thrust Control.
Prevent future catastrophic engine failure permanently with the only true Eternal Fix for the notorious Porsche intermediate shaft bearing. Unlike the other failure-prone ball bearing products that the original IMS and other upgrades on the market use, EPS uses a patented cylindrical bearing with thrust control that can be pressed directly into the back of the engine without disassembly. The cylindrical bearings have over 12 times the load capacity of other ball bearing solutions making the EPS IMS bearing the clear choice. Backed by a full 5-year warranty and includes an oil feed modification kit. Order yours today!
WHAT MAKES OUR SOLUTION DIFFERENT?
Roller bearings are not intended for carrying large axial loads. Similar to failure-prone ball bearings, when cylindrical roller bearings are used for thrust control, the roller becomes compromised due to the limited surface contact area on the sides of the rollers. The results of using a cylindrical bearing for thrust control will be similar to all other ball bearing solutions.
In our patented system, we use a 15mm cylindrical bearing with thrust control that allows for the separation of the axial load from the radial load. Our roller bearings do NOT carry the axis load (thrust control) on the side, which leaves the roller free to carry only the radial load (main load). The axial load is carried exclusively on the entire permitter of the outer race. This results in a bearing that is not overloaded and will last the lifetime of the engine.
EPS recommends using this product in conjunction to the Rear Main #8 Seal and Housing
Product Vehicle Group
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
£815.00
Now £798.70
In stock
IMS Intermediate Shaft Bearing Upgrade Eternal Fix -62MM FLANGE - Closed Engine
Code: 987997IMS62MM
IMS Intermediate Shaft Bearing Upgrade Eternal Fix -62MM FLANGE - CLOSED ENGINES (MUST USE OUR BORING TOOL IN ORDER TO INSTALL)
the boring tool can be purchased or rented from us
Code: 987997IMSTOOL
Fits:
Porsche 997 2005-08
Porsche Boxster 987
Porsche Cayman 987
(Not for M96 Engines)
Porsche Ims Intermediate Shaft Bearing Upgrade - Eternal Fix with Oil Pressure Feed - 62 MM - Closed Engine Permanently Fix Your Intermediate Shaft With The Eternal Fix! Unlike Failure Prone Ball Bearings, Eps Uses A Patented Cylindrical Bearing With Thrust Control.
Prevent future catastrophic engine failure permanently with the only true Eternal Fix for the notorious Porsche intermediate shaft bearing. Unlike the other failure-prone ball bearing products that the original IMS and other upgrades on the market use, EPS uses a patented cylindrical bearing with thrust control that can be pressed directly into the back of the engine without disassembly. The cylindrical bearings have over 12 times the load capacity of other ball bearing solutions making the EPS IMS bearing the clear choice. Backed by a full 5-year warranty and includes an oil feed modification kit. Order yours today!
WHAT MAKES OUR SOLUTION DIFFERENT?
Roller bearings are not intended for carrying large axial loads. Similar to failure-prone ball bearings, when cylindrical roller bearings are used for thrust control, the roller becomes compromised due to the limited surface contact area on the sides of the rollers. The results of using a cylindrical bearing for thrust control will be similar to all other ball bearing solutions.
In our patented system, we use a 15mm cylindrical bearing with thrust control that allows for the separation of the axial load from the radial load. Our roller bearings do NOT carry the axis load (thrust control) on the side, which leaves the roller free to carry only the radial load (main load). The axial load is carried exclusively on the entire permitter of the outer race. This results in a bearing that is not overloaded and will last the lifetime of the engine.
EPS recommends using this product in conjunction to the Rear Main #8 Seal and Housing
the boring tool can be purchased or rented from us
Code: 987997IMSTOOL
Fits:
Porsche 997 2005-08
Porsche Boxster 987
Porsche Cayman 987
(Not for M96 Engines)
Porsche Ims Intermediate Shaft Bearing Upgrade - Eternal Fix with Oil Pressure Feed - 62 MM - Closed Engine Permanently Fix Your Intermediate Shaft With The Eternal Fix! Unlike Failure Prone Ball Bearings, Eps Uses A Patented Cylindrical Bearing With Thrust Control.
Prevent future catastrophic engine failure permanently with the only true Eternal Fix for the notorious Porsche intermediate shaft bearing. Unlike the other failure-prone ball bearing products that the original IMS and other upgrades on the market use, EPS uses a patented cylindrical bearing with thrust control that can be pressed directly into the back of the engine without disassembly. The cylindrical bearings have over 12 times the load capacity of other ball bearing solutions making the EPS IMS bearing the clear choice. Backed by a full 5-year warranty and includes an oil feed modification kit. Order yours today!
WHAT MAKES OUR SOLUTION DIFFERENT?
Roller bearings are not intended for carrying large axial loads. Similar to failure-prone ball bearings, when cylindrical roller bearings are used for thrust control, the roller becomes compromised due to the limited surface contact area on the sides of the rollers. The results of using a cylindrical bearing for thrust control will be similar to all other ball bearing solutions.
In our patented system, we use a 15mm cylindrical bearing with thrust control that allows for the separation of the axial load from the radial load. Our roller bearings do NOT carry the axis load (thrust control) on the side, which leaves the roller free to carry only the radial load (main load). The axial load is carried exclusively on the entire permitter of the outer race. This results in a bearing that is not overloaded and will last the lifetime of the engine.
EPS recommends using this product in conjunction to the Rear Main #8 Seal and Housing
Product Vehicle Group
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
£815.00
Now £798.70
In stock
Intermediate shaft (IMS) bearing kit - for Porsche
Code: 8102
Intermediate shaft (IMS) bearing kit - for Porsche
The 8102 has been developed specifically for the quick and safe removal and replacement of the Porsche IMS (Intermediate Shaft) bearing on the M96 and M97 engines fitted to all water cooled 911, Boxster and Cayman models from 1999 through to 2008. Complete with the camshaft and crankshaft timing tools.
Porsche Applications: 911, Boxster, Cayman (1999 - 2008).
Engine code applications include: M96, M97.
Kit includes camshaft and crankshaft locking tools for both early and late engines.
2 methods for removal of the bearing are provided. Bearing installation as per OEM instruction.
Made in Sheffield. IMPORTANT: ensure the force screw is well lubricated with molybdenum disulphide grease before use.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
8102
The product you are viewing cross references to these numbers
The 8102 has been developed specifically for the quick and safe removal and replacement of the Porsche IMS (Intermediate Shaft) bearing on the M96 and M97 engines fitted to all water cooled 911, Boxster and Cayman models from 1999 through to 2008. Complete with the camshaft and crankshaft timing tools.
Porsche Applications: 911, Boxster, Cayman (1999 - 2008).
Engine code applications include: M96, M97.
Kit includes camshaft and crankshaft locking tools for both early and late engines.
2 methods for removal of the bearing are provided. Bearing installation as per OEM instruction.
Made in Sheffield. IMPORTANT: ensure the force screw is well lubricated with molybdenum disulphide grease before use.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
8102
99610590102TOOL
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
£234.92
Now £230.22
In stock
Intermediate shaft IMS bearing upgrade. eternal Fix IMS Boxster 986 / 996 / 997
Code: 99610590102EPS
IMS Intermediate Shaft Bearing Upgrade. Eternal Fix
for M96 Engines and Early M97.01
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99610590102EPS
The product you are viewing cross references to these numbers
for M96 Engines and Early M97.01
Fits:
Porsche 996 C2 3.4L 1998 - 2001
Porsche 996 C2 3.6L 2002 - 2004
Porsche 996 C4 3.4L 1999>>
Porsche 996 C4 3.6L 2000>>
Porsche 996 C4 3.4L 2001>>
Porsche 996 C4 3.6L 2002 - 2004
Porsche 996 C4S 3.6L 2002- 2005
Porsche 997 C2 3.6L 2005 M96.05
Porsche 997 C2S 3.8L 2005 M97.01**
Porsche 997 C4 3.6L 2005 M96.05
Porsche 997 C4S 3.8L 2005 M97.01**
**Engine (3.8) number up to M97/01 68509790 has the older IMS bearing (this product fits) and Engine number from M97/01 68509791 has the larger revised IMS. (this product does not fit)
Porsche Boxster 986 2.5L 1997 - 1999
Porsche Boxster 986 2.7L 2000 - 2003
Porsche Boxster 986 2.7L 2004 - 2005
Porsche Boxster S 986 3.2L 2000 - 2005
Porsche Boxster 987 2.7L / 3.2L / 3.4L
**M96 Engine only
Fits engine types: Carrera 996 M96 engines, Boxster 986 M96 Engines, Boxster 987 M96 Engines, Carrera 997 M96 & M97.01 **Engine (3.8) number up to M97/01 68509790 has the older IMS bearing (this product fits) and Engine number from M97/01 68509791 has the larger revised IMS. (this product does not fit)
IMS Eternal Fix retro fit kit installs in-car without removal or disassembly of the engine required. The Cylindrical Bearing with Thrust Control design has a load capacity 5 times greater than the inferior, failure prone, Ball Bearing solutions on the market!
Why Cylindrical is Best?
Cylindrical Bearings have very high load bearing capacity, 5 times more than Ball Bearing. Cylindrical Bearings are used in, High Temp & Low Viscosity Lubrication such as Automatic Transmissions. They can carry extreme lateral pressure without wear to the friction surfaces. This is because the bearing friction surface is flat not concave.
For More Information CLICK HERE
For Installation Instructions CLICK HERE
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99610590102EPS
106-08.2
106-08.2R
106-08.4R
106-08.4
99610590102
99610590103
99610590104
99610590105
99610590106
99610590107
99610590100
99610590101
99610502406
99610602704
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
£575.00
Now £563.50
In stock
Intermediate shaft seal IMS Retrofit Pro Tool Kit for Boxster 986 / 996 / 997
Code: 99610590102TOOL
IMS Tool Kit by EPS
Bearing puller and adapter for extracting the existing bearing from the original center stud/bearing support (shown above)
Bearing driver tool to allow easy installation of the new bearing (shown above)
"Easy Out" adapter to allow extraction of bearing using the EPS bearing puller when and if the center stud/bearing support is broken or breaks during extraction
Crankshaft Pully TDC Lock Pin to secure the engine at the proper position to do an IMS Retrofit
Camshaft locks for both early 5-chain and later 3-chain engines (kit includes one ea.)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99610590102TOOL
The product you are viewing cross references to these numbers
Bearing puller and adapter for extracting the existing bearing from the original center stud/bearing support (shown above)
Bearing driver tool to allow easy installation of the new bearing (shown above)
"Easy Out" adapter to allow extraction of bearing using the EPS bearing puller when and if the center stud/bearing support is broken or breaks during extraction
Crankshaft Pully TDC Lock Pin to secure the engine at the proper position to do an IMS Retrofit
Camshaft locks for both early 5-chain and later 3-chain engines (kit includes one ea.)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99610590102TOOL
99610590102TOOL
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
£205.00
Now £200.90
In stock
Large IMS bearing for DOF
Code: 99610599677
Large IMS bearing for DOF
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99610599677
The product you are viewing cross references to these numbers
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99610599677
99610599677
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
£135.00
Now £132.30
In stock
M96 Faultless Tools IMS Removal & Installation Tool Kit (Req. for 106-08.2.2)
Code: 106-08.22
The Faultless IMS Tool is required for installation of the Single Row Pro IMS Retrofit and can also be used to install all existing IMS Retrofit and Solution bearings, as well as for extraction of the original bearing.
Installation of newest Single Row Pro IMS Retrofit is carried out with newly developed, patent pending method, allowing for positive retention of the new bearing with an internal wire-lock. The installation of a dual row bearing in the place of a single row would not be possible without the specialized tooling and processes. The Faultless IMS Tool is required for installation of the Single Row Pro IMS Retrofit and can also be used to install all existing IMS Retrofit and Solution bearings, as well as for extraction of the original bearing.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
106-08.22
106-08.22
1060822
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
£865.00
Now £847.70
In stock
Also found on these pages
You may also like
-
ECU Re-Mapping DIY
-
Electronic Throttle Booster
-
IRIDIUM POWER Spark Plugs
-
IRIDIUM RACING Spark Plugs
-
Plasma Direct Coils
-
Hi Flow Air Filters
-
Air Induction Kits
-
Short GearShift Kits
-
Performance Plenum
-
ECU Reader / Fault Finder
-
Exhaust Packages
-
Fuel Additives
-
Pedals / Floor Boards / Track Mats LHD Cars
-
Pedals / Floor Boards / Track Mats RHD Cars
-
Fire Extinguisher Mounts
-
Brey-Krause Fire Extinguisher Mount
-
Tow Eye Hooks & Tie Downs
-
Alloy Block Off Plates
-
Clutches / Flywheels / Hydraulics
-
Track & Race Coolant Radiators
-
Wössner Forged Piston Kit
-
CP Carrillo Connecting Rods
-
Brake Hoses Stainless Steel Goodridge
Popular Models
.JPG){kind=link}
