Air Induction Kits
Air Filter Vortex for Porsche 964 C2/4 3.6L 1990-94
At the heart of the unique DesignTek air filter is a specially developed polyurethane foam which acts as a filtration medium, higher both higher performance and life expectancy then paper air filters. The PYRAMID VORTEX design outer surface area will absorb larger amounts of airborne dirt particles, while still allowing air to flow freely.
High flow with excellent filteration.
This Product Fits:
Porsche 911 (964) 3.6 Carrera 2 07/89 - 09/93
Porsche 911 (964) 3.6 Carrera 4 12/88 - 09/93
Porsche 911 (964) 3.6 Carrera RS 06/91 - 09/93
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3603001208
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
The air duct is directed up towards the boot lid where air is forces into the air duct and then into the air box
Fits:
Porsche 964 C2/C4 1989-1994
Porsche 993 C2/C4 1994-1997
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
964167004
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
964 Ventilation Kit includes:
- Distributor ventilation connection (A)
- Rubber Grommet (B)
- White Grommet connector (C)
- Hose (D)
HOW TO FIT: Firstly prise of the oval plate arrowed on the distributor with a screwdriver. Then remove the large black air guide pipe as we need to drill a hole in it at the green dot. The pipe removes by loosening jubilee clips at top and bottom. You will also need to remove two sensor connectors on the pipe. I also removed the two sensors near the distributor so that I had easy access to the plate. Drill at 18mm hole in the pipe, 40mm to the right of the tail light ventilation nipple. Deburr the hole and remove all shavings. Install the rubber grommet (B) into the hole and install the white connector (C) into the grommet.Install the distributor connector (A) into the hole in the distributor where the plate was. Finally refit the air pipe and connect back up all the sensors. Install the hose (D) onto the new distributor and air pipe nipples and route
Fits:
Porsche 964 1990-94
Porsche 993 1995-97
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
The Porsche part is ugly roto-formed cheap plastic with parting lines whereas accurate replica is carbon fiber.
Saves 8 to 9lbs about 4Kg from the rear of all 964's and 993's. Will not work on C2 Turbos/965 cars.
Replaces blower motor assembly and ductwork and still allows plenty of heat just like the factory RS part.
Ultra cool clear coated real carbon fiber tube that really cleans up engine bay and makes working on engine easy.
Simple do it yourself 20 minute installation that gives you the RS style engine look.
All late model 993's 1996-98 require the 964 early type fan shroud (as shown on exploded image)
Can be added below
fits:
Porsche 964 C2/C4 1989-1994
Porsche 993 C2/C4 1994-1997
To see a video about this product Click Here
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
964167003
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
This Product Fits:
Porsche 964 3.6L C2 / C4 / RS 1988-94 (Excl. Turbo)
K&N® washable, reusable High-Flow Air Filters™ feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower.
Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's 10-Year/Million Mile Limited Warranty.
K&N drop-in replacement filters are designed to install easily into your factory air box.
Works with Original Equipment Manufacturer Vehicle Electronics.
Environmentally Friendly, K&N Reusable Air Filters
Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
33-2077
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Engine Modifications & Upgrades
- Electronic Fuel Injection Throttle Kits
- IRIDIUM POWER Spark Plugs
- IRIDIUM RACING Spark Plugs
- Hi Flow Air Filters
- Short GearShift Kits
- Performance Plenum
- ECU Reader / Fault Finder
- Exhaust Packages
- Fuel Additives
- Pedals / Floor Boards / Track Mats LHD Cars
- Pedals / Floor Boards / Track Mats RHD Cars
- Fire Extinguisher Mounts
- Brey-Krause Fire Extinguisher Mount
- Tow Eye Hooks & Tie Downs
- Alloy Block Off Plates
- Clutches / Flywheels / Hydraulics
- CP Carrillo Pistons
- CP Carrillo Connecting Rods
- Brake Hoses Stainless Steel Goodridge