Powerflex Black Series Bushes

Powerflex Black Series Front Wishbone Rear Bushes.
SET OF 2 for both wishbones

Fits to Wishbone OEM Part Number: 96434101706 / 96434101707 / 96434101806
Fits to Wishbone OEM Part Number: 96434101807 / 96434101780 / 96434101782
Fits to Wishbone OEM Part Number: 96434101880 / 9643410182



Fits:
Porsche 964 1990-94
Porsche 993 1994-97

Click 'Zoom in' for large parts diagram.
Fits to No 12 on the diagram.


Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-101BLK

The product you are viewing cross references to these numbers

PowerFlex Black Series Wishbone Inner Front Bush.
PAIR



Fits:
Porsche 964 1989-94
Porsche 993 1994-98

Click 'Zoom in' for large parts diagram.
Fits to No 12 on the diagram.


Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-102BLK

The product you are viewing cross references to these numbers

Powerflex Black Series Stabilizer Bar Bushes Rear POLYURETHANE
Size: 18mm anti-roll bar diameter
Quantity: 2 (2 per car)
Porsche Refference to: 477411313B



Fits:
Porsche 911 1978-85 Rear axle
Porsche 911 TURBO 1978-85 Rear axle
Porsche 911 TURBO 1989 Rear axle
Porsche 944 1985-91 Rear axle Please choose by size
Porsche 964 RS Rear axle
Porsche 964 C4 Rear axle Please choose by size
Porsche 968 Rear axle Cars with Sport Suspension & tiptronic transmission
Porsche 993 C2/C4 Rear axle Cars with standard suspension
Porsche 993 C2S/C4S Rear axle Cars with Sport Suspension - Please choose by size

Click 'Zoom in' for large parts diagram.
Diagram Ref No 11.

Pack of 2. Two bushes per car

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-209-18BLK

The product you are viewing cross references to these numbers

Powerflex Black Series Rear Trailing Arm Front Bush
SET OF 2 for both sides



Fits:
Porsche 964 Carrera 2/4, Turbo & RS 1989-1994

Fitting Instructions >> Click Here

Click 'Zoom in' for large parts diagram
Fits to No 1 on the diagram.

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-106BLK

The product you are viewing cross references to these numbers

Powerflex Heritage Collection Wishbone Inner Rear Bushes.
SET OF 2 for both wishbones

Fits to Wishbone OEM Part Number: 96434101706 / 96434101707 / 96434101806
Fits to Wishbone OEM Part Number: 96434101807 / 96434101780 / 96434101782
Fits to Wishbone OEM Part Number: 96434101880 / 9643410182



Fits:
Porsche 964 1990-94
Porsche 993 1994-97

Click 'Zoom in' for large parts diagram.
Fits to No 12 on the diagram.


Powerflex Heritage Collection. For Modern Day Classics.

A range of bushes engineered for the road to compliment your classic car.

POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-101H

The product you are viewing cross references to these numbers